Duplicating an entire project?

Hi there,
I have duplicated all of the files and the folder structure in an ID CS4 project that contains 40 chapters organized under a book file. I renamed the parent folder to indicate a new version.
When I open the book file in the duplicate folder structure and open one of the chapters, ID opens the chapter file from the original folder.
How can I edit my book file to point to the newly duplicated files in the new folder structure?
I haven't found a discussion on this subject nor does my CS4 Bible seem to mention this. Am I trying to do something that shouldn't be done at all?
Thanks,
Peter H.

Thank everyone for the feedback. I wasn't aware of the package feature you mentioned so I'll investigate that possible solution.
I successfully updated the book file to point to all of the copies... it just took a while with 40 chapters.
I suspected there would be an issue with the image links. I'd like to find a solution to that as well. Since I'm the newest person on the team but solely responsible for his particular document, it is up to me to fix things without rocking the boat too much. (politics)
After investigating a few of the links, I see that some of the hundreds of images are pointing to indivisual computers belonging to people no longer employed by the company. I'm finding links pointing to user folders on distant C: drives.
I don't mind independent copies of the entire project with all the images in folders below the ID files. Wish those links were relative paths instead of the full path but it is what it is... I am more concerned with the missing images and the fact that ID now has to use whatever temp file it is using to display the image of the missing file.
Sounds like I've got a busy week ahead of me... but I'm done for now... got my 40 hours in and I'm not authorized any overtime no matter how much I'd like to clean this up as quickly as possible. :-)
Thanks again,
Peter H.

Similar Messages

Just imported clips and edited as new project. closed imovie. came back later and the entire project was gone. i was not done so i did not finalize it. how do i get the program to keep my project in progress

running imovie on a powermac w 10.6.8. went through the tutorials. imported my clips, got the hang of basic editing, and created a project.
was pretty happy with it, but needed to shut down and come back to work on it later. when i did come back, the entire project was gone.
how do i get the program to save my work in progress, without finalizing it?
thanks

So, everything worked out just fine!
I have all my material in the ProRes Codec on a seperate drive now. The project itself was kept or rather duplicated, the bin structure etc stayed the same but is linking to the newly created files. The playback and workflow is fluent. I am happy!
Time info: For about 120 GB of material the codec change process took 25 hours.
Thanks for your help!
Best
*a

OWB copying entire project to another repo environment

Hi Experts,
We are using Oracle 10g R2 and I'm still pretty much new to OWB. My question probably have been answered before but I can't find in the forum.
Details:
- We have 3 Repository Environment (Dev,Test,Prod).
- Users login in Dev
- In Dev we create our projects, deploy mappings and execute for initial test
- When everything works fine, we set the locations and configuration to TEST environment. Again deploy and test for larger data set
Question:
- Is it possible to copy the entire projects from Dev into TEST environment? If yes, please assist me on how to do it.
Concern:
Although changing location and the configuration for control center from one environemnt into another works fine. For me, having the copy in TEST is more organize and easier to manage.
Thank you for reading and hoping to get some answers.

After the import, you can check if all the objects were imported in the log. If the project wasn't recognized, all the internal objects will fail.
But before you should choose if you want to match by names or id. If the projects were created isolated in each enviroment, you have to choose "by names". If the project names are diferent, then nothing will be imported. I only use "match by id" when one project was a result of a previous import of the other project.
Also, you have to choose if you want to merge or replace the objects, because you'll have many duplicated objects. If you have chosen "create only" and the objects was already there, nothing happens.

Importing entire project into DTR

Hello All,
I need to put my project into DTR.
Can i import my entire project into DTR inspite of doing it file by file.
Thanks & Regards
Abhivyakti

Since my colorsit doesn't have CS4, I nested sequences in another timeline so that when I imported project in AE my colorist could see the one clip nest and click it to see other timeline to see all clips detail.
Thank you.

Can you set a Cost Rate Table to be used for an entire project

In earlier versions of project, the default cost rate table (A) is used unless changed by the user for each assignment. In 2010, is it possible to define which cost rate table to use for the entire project, not at the assignment level?
Thanks.

Hi melduncan,
Welcome to this Microsoft Project forum:)
I assume you want project to have a default cost rate, so why not set the cost rate details into A to begin with, You could then set this as a template from which you initiate all your new projects see FAQ
Item: 8. New Project Template. FAQs, companion products and other useful Project information can be seen at this web address: http://project.mvps.org/faqs.htm
Hope this helps - please let us know how you get on :)
Mike Glen
MS Project MVP
See
http://tinyurl.com/2xbhc for my free Project Tutorials
"" wrote in message
news:[email protected]...
In earlier versions of project, the default cost rate table (A) is used unless changed by the user for each assignment. In 2010, is it possible to define which cost rate table to use for the entire project, not at the assignment level?
Thanks.

BAPI for scheduling entire project?

Hi!, we need to simulate a scheduling depending on dates introduced by user.
Does anybody know if its possible to schedule entire project via function or similar ECC 6.0?. CJ29 seems to be difficult becase log of changes are shown in ALV...
Thanks for your help!!!!!

Hello!,
Bapi_project_maintain has schedule method?.
Also if bapi_network_maintain could schedule all may networks. How could I ascend new dates to wbs elements and project?. Also, Could I access to scheduling result?.
My issue is tahe we need to do a kind of scheduling simulation. User could change a activity date (via constraint) and we have to schedule project taking into account this new date. If the result is not good for user, we have to delete the constraint and keep the project as it was before the process.
So, we need to schedule the project via bapi_network_maintain only if the bapi returns the scheduling results...
Any idea????
Thanks in advance for your help!!!!.

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded l so I have created two new libraries, but can't seem to move the projects into them

In Aperture 3, how can I easily move entire projects out of my main Ap Library into other libraries? My Ap library is running super slow because it's overloaded, so I have created two new libraries, but can't seem to move the projects into them?

Hello Annabel,
To move entire projects export them as Aperture Libraries, and then import those Libraries into the other Aperture Library:
Select the Project in the Inspector, then
File -> Export -> Project as Library
In the other Library do:
File -> Import -> Library/ Project
But I am not quite convinced, that the size of your current Aperture Library is responsible for the slowness of Aperture - Aperture is designed to cope with huge libraries.
You may want to post your hardware setup and details of your library, and some of the hardware experts here may help you to find the reason for the slowness.
A huge library should only be a problem, if the projects are too big, and if you have many, many smart albums at the root level of your library.
So keep the projects small, and try to move some of your smart albums to lower levels in your folder structure (then Aperture does not need to scan all of your images to build the smart album).
Other reasons for Aperture's slowness may be, e.g.
An overfull system drive and/or external drive (keep at least 20% of your drives empty)
lack of RAM
a corrupted Aperture Library, that needs repairing
Have you checked those options, before you split your library? It would be a pity to split it, for you would loose the ability to browse all parts at the same time, to use all your images in the Media Browser, etc.
Regards
Léonie

How to make the entire project in the project server 2013 reschedule؟

How to make the entire project in the project server 2013 reschedule ?
Because item %compelet related to reschedule
In this photo it is known there are no items update project

Hi,
In PWA, you do not have the feature to update the project plan in one click, meaning marking as completed the work before the status date or reschedule after the status date the remaining work. Either you have to use Project Pro, or edit individually the
assignments with the actual work (if not comming from timesheets) and remaining work.
Hope this helps,
Guillaume Rouyre, MBA, MVP, P-Seller |

Transfer an entire project to another mac

Now that im using the new iMovie 10, I need to be able to transfer entire projects for further editing on my laptop. I havent figured this out yet. Anyone else have some tips?
Thanks,
-A

Now that im using the new iMovie 10, I need to be able to transfer entire projects for further editing on my laptop. I havent figured this out yet. Anyone else have some tips?
Thanks,
-A

Checking out entire project

I'm trying to get RoboHelp 9 set up with Subversion. Thus far I'm using the RH UI to do everything, but I've seen posts from others saying they check the entire project in and out of source control. Can comeone please elaborate on how that works? I know that there are some files that you don't add to source control, such as the .cpd file. So how do you set everything up? Are you checking the folder that contains the project in and out? If so, how do you omit the files that are supposed to be excluded?

Hi,
You can check out the project from the RoboHelp GUI. Click Check out all to check out the entire project.
You can also use the client to check out all the project files at once. Typically, you would not integrate the project with version control. You just check in the files after you've closed RoboHelp.
For more info on RoboHelp and Subversion, see also http://www.adobe.com/devnet/robohelp/articles/robohelp_subversion.html
Greet,
Willam

Delete an entire project in Premiere Pro CS5.5

HI: How can I delete an entire project in PP CS5.5. I'm worried about deleting because I have a bunch of projects saved and I'm not sure how they are saved and if they are scattered all over the HDD's. I don't want to delete something that I'm using. I use a designated drive and make folders for each project but it has gotten a bit out of hand and I might not have been as dedicated as I should have been as far as organization. It seems that some of these files go to the C drive in Adobe folder and I never use that but something does. Can anyone tell me how Adobe stores all this stuff and how to know what files are with what projects. I would gladly read about it if I could get pointed in the right direction. A preThanks to all who respond. Spark

Settings for scratch disks are set in the Project Settings/Scratch Disks and all the available other settings are in the Edit/Preferences/Media options. Cleaning the Media Cache can help in cleaning up and is not destructive. Everything that is needed will be recreated when PR needs it. It will show up as indexing, conforming and creating PEK files.
Changing specific directories like C:\Users\<user name>\AppData\Roaming\Premiere Pro\5.5 and C:\Users\<user name>\AppData\Local\Adobe\Premiere Pro\5.5 are generally not advised, specially not for the faint of heart.

I am getting quicktime error 50 when I attempt to export a retimed project in fcpx to youtube. I mix and match retime rates. I usaully have no issues. The entire project is retimed.

I am getting quicktime error 50 message when I try to share a project to youtube. I use retime frequently, mixing and matching rates with no issues. I am having trouble with this project. The entire project is retimed ( which I have done before), it is four minutes and change in length. I used different rates, holds as well, and
secondary storylines ( retimed to match the primary clip rate ). Any suggestions would be helpfull, thank you.

I figured it out:
FCPX does not support NTFS drives, even with Paragon NTFS working perfectly for everything else on the system.
I guess Apple (just) assumes that nobody will, or should, be using any other filesystem than Mac with FCPX.
I wasted hours looking for a solution, when a better error message besides a misleading "cannot allocate memory" could have been something more useful.
Not impressed.

Roll back an entire project, not individual files

Hi,
is there a way to restore an entire project to a certain date? I can do it for individual files but have not found a global function.
Normally when reaching major milestones we create a copy of the entire project anyway. So this is only relevant for rolling back shorter periods of time.
Robert

You can from your source control system (if it supports it, what it should). With TFS I just get a specific version of the project from Team Explorer. And with VSS I did the same: Open up the client and get the project from there.
Greet,
Willam

RH8 HTML: Publishing Sections of Project (Not Entire Project)

Hi,
I have a fairly large project that I'm doing various updates to. Is there a way to publish just the areas that have been updated instead of the whole entire project? Currently, I select "generate primary layout" once I commit through SVN but this publishes the entire project. I just want to publish certain sections as they're being updated.
Thanks!

Hi there
You can accomplish what you want in many ways. I cannot help but to notice you used the word "Publish". Are you using the built in Publishing feature to do this? If so, note that typically this operation only copies over the files that have been added or changed since the last time you published.
From what you stated, one may also infer that you wish to prepare certain content but prevent it from going out as you update. If that's what you are hoping to do, you would use Conditional Build Tags to accomplish that. Just create a tag and name it perhaps IP (for In Progress) and exclude anything tagged with IP during the generation of the output. Assuming everything has been correctly tagged and is working, nothinig tagged with IP should end up among the output files.
Hopefully this was helpful... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

My entire project keeps becoming unrendered after about a minute

Hi guys, hopefully someone can help me with this.
I'm making a documentary in HD, so it's a pretty big project file. Yesterday when I opened the project, it loaded everything and worked for about 1 minute, then I got the spinning wheel for a minute or two, then every single video clip in the entire project became unrendered. I closed it out and didn't save it and everytime I open it back up it keeps doing the same thing. It's doing this when I'm not even editing, I was just watching clips and transcribing them.
I have tried making a copy of the project file in a different location just to see if it would work normally, and changing to unlimited RT and I trashed my preferences, but none of that is working. I also closed out all of the sequences except one, because I did have a lot of them open at once and I thought that might be overloading it or something, but that didn't help either.
Any ideas? I don't want to have to end up re-rendering the entire thing every 30 seconds and I can't really edit without being able to see the video...
Thanks,
Lisa

The media is 1920x1080, 60i, I think the setting is FX or whatever the highest one is on a Canon Vixia HF200.
The Sequence is set to Apple Intermediate Codec, HDV 1080i60 (mine doesn't show up with an AVCHD option for this...or a 1920x 1080, I'm pretty sure the sequences are 1440x 1080...Anyone know what the deal is with that?)
I'm using Final Cut Express 4.0
And the project was working fine up until now. But, last week one of my hard drives kept somehow ejecting itself. I ended up being able to close it without saving and reopen so I didn't have to "reconnect media" and render.

Duplicating an entire project?

Similar Messages

Maybe you are looking for