Duplicating/copying plug-ins OR bus sends from channel to channel?

Is there a key-command that I am unaware that allows me to copy a plug-in from one channel to another? Say for instance I have a few vocal tracks that I want a certain plug-in on. I know I can send it over to a bus track that way, but is there a way I can just copying a plug-in from channel to channel? I know about moving the plug-ins with the command-click and also bypassing them, but can you copy em? Thanks
~trevor
Edit: Is there a way to copy Bus sends to each channel rather than going through the pull-down menu and selecting 10 of em?

Am I still missing an essential OS X problem here? I am still semi-new to OS X and don't know a lot of the tricks, but I have a key called alt and option. It's on the same key... wait, I figured it out... I had to click the Command/Open Apple key, then hit the Alt/Option key. Doh.. I am an idiot. Thanks guys!
~trevor

Similar Messages

Can Logic plug ins remove background noise from interview?

Can Logic plug ins remove background noise from interview?
A friend with an important interview recorded in noisy conditions has asked me to help remove background noise - never done this technically.
Is there a Logic or third party plug in that would could remove background noise from a spoken word interview? Have tried EQ which improves the sound slightly but not a solution.
Anyone with specialised knowledge of this sound editing operation?
cheers
MS

There are several 3rd party denoisers, they mostly work by first 'learning' the noise footprint of the audio, for which it is best to record a few seconds of silence (with an open mic).
These will all do a decent to excellent (it all depends on the source material) job:
http://www.kvraudio.com/get/3199.html
http://www.kvraudio.com/get/2104.html
http://www.kvraudio.com/get/2791.html
http://www.kvraudio.com/get/1182.html
http://www.kvraudio.com/get/1029.html
Addit:
Is it that background noise (traffic, talking etc) drowns out the words? Then you'd probably have more luck with (radical) eq-ing and/or notch filtering to find the most dominant frequency range of the speaker in relation to the background noise.
As an interviewer myself I will point out that even with a small disctaphone you need to have some awareness of how the microphone picks up things. As soon as you nead to lean towards whoever you're talking to, just to make sure you're audible, the dictaphone on the table is probably recording mainly ambient noise, the interview being part of that. This is especially a problem when interviewing in a busy public space.

Moving and Copying Plug Ins from one channel to another

According to p305 of the Logic manual, "Command dragging plug ins from one insert to another copies them along with all parameter settings" ( in the Audio Configuration window),
However when I do this it MOVES the settings and plug ins leaving the original track bereft...
Any explanations gratefully received
ms

"holding option command copies the plug in settings" p305
This is the obvious work around ... excuse the air space

My Photoshop Elements 6.0 suddenly can't download plug-ins to read input from my cf photo card, or s

My Photoshop Ele
ments 6.0 suddenly stopped loading ph
otos from my CF Card with the message that it could not download
plug-ins to read the device. It al
ways worked before. Would it help to re-install Elements, or should I look for a way to download the Plug-in. Don't even know what it is called. Thanks

When you browse to Computer is your CF card shown as a removable drive?
If not try shutting down the computer and re-starting and then inserting the CF card or plugging in the USB again.
Open Elements Organizer and press Ctrl+G to bring up the downloader and under Source click refresh to locate your CF card.

Plug ins- Audio units question from a Cubase SX user

With Cubase SX3 I have 7 VST instruments (2) bass (4) synth (1) drums + at least 100+ effect plug ins. If you add my Powercore firewire plugins, Waldorf Attack, Absynth 3 battery 2 I have a nice arsenal. I know AB3, Battery and the Powercore work in Garageband so I would assume the same for Logic but I need to know cause it looks like I'm giving up instruments (SX3)for Audio Units(Logic) Am I right ? If so what Audio Units / plug ins come with Logic and Logic Express? I want to get Logic for my other studio is it worth learning?
rdee

Hi,
Take a look at http://www.fxpansion.com/product-auadapter-main.php . This plugin should enable you to use your VST plugins in Logic (if I'm not terribly wrong).
Logic Express comes with 4 synths, 1 sample player, 3 delays, 4 distortions, 6 plugins for dynamics (compressors etc.), 6 EQ's, 6 filters, 6 modulation plugins, 4 reverbs, and some nice special ones like a tuner, pitch correction and vocal transformer. Besides this, there are quite a few good (and free) AU plugins. My favourites are Sampletank Free and Ambience (Smartelectronix).
I think that Logic has the right name: it's very logical to use. Besides that most of the plugins sound great.
Regards,
Jaap

3rd party plug-ins are not displayed in channel strip audio unit insert

I have successfully loaded several 3rd party plug-ins (Wave Masters and IK multimedia Studio Bundle) into my MacBook Pro. The files are shown in Library>Audio>Plug-ins>Components, in User>Downloads, and they appear in my Audio Unit Manager (for each the box is checked for access from Logic Pro). Yet, when I go to a channel strip to launch some of the plug-ins, the product does not show up under audio units. How do I get these plug-in files to the insert list for my audio channels? Unfortunately, I need to launch these plug-ins in order to authorize them with the vendor. I must be missing a key step, but I have not had this issue before with other 3rd party plug-ins. Thanks for any direction.

Also, I know in the case of my IK Multimedia Classic Studio Reverb, it will NOT be available from within my 3rd party plug-in list, on a MONO channel.
I need to be opening the list on a stereo track (or stereo Aux), in order to be able to select those plug-ins.
See if it's something that simple...

How REC ENABLE several tracks? As well as copy plug from one strip to next?

First of thanks.
Gee, I didn't know I could fit both questions in the threat title, but there they are.
1) How to REC ENABLE DUPLICATE AUDIO TRACKS, I thought it was command shift, but tried that as well as ctl shift, alt-shift, etc, and the track hilights but as soon as I click REC it jumps to that one track and selects that.
2) how to copy a channel insert of plug in (DRUMS MODULE, GUITAR SIM) from one to another while keeping it on the original track?
Also, as some may know, I get this HUI Error, and do not know what to do. I looked in preferences setup and do not see it listed. I do use MACKIE FIREWIRE interface and believe HUI is their control panel..
I uploaded a image for you to see.
Thanks all.
http://img207.imageshack.us/my.php?image=logicerrorcm7.gif

Hold the shift key down to record enable an audio
track and an audio instrument track at the same
time.
But if you are trying to record enable two audio
tracks, they each need to be assigned to a different
input. In other words, only one track can have "Input
1".
As to copying plug-ins from one track to another,
this can be done from the mixer page, or the
environment, or the audio configuration window. Hold
down the Apple key, the curser turns into a hand.
Then hold down the Apple key AND the option key, to
copy/drag a plug-in to another track.
Someone else will have to answer the HUI question. I
haven't seen that before...
Oh man,,,,,,ok, here is the deal,,,,I have a guitar plugged into HI-z High quality firewire interface, channel 2, the idea was to open a few instances of say Amplitude 2 or Guitar Rig and select different amps. I love Logic more so than say SX, but in SX this can be done.
Is there a work around?
Will check out the corrupt file and get back to that...
Thanks

Plug-ins from CS4 to CS5?

Best way to have the plug-ins transferred to CS5 from CS4?

You can actually create a second copy of the application icon to run in 32-bit mode. Just right-click on the application icon, select Copy, then right-click inside the CS5 folder and select Paste. Rename it to "Photoshop CS5 32" or whatever you like, and then hit Cmd-i and check the "Open in 32-bit mode" box. The new application will complain that it's been moved when you launch it - just click "Do Not Update" and it will open in 32-bit mode (you can see the x32 in the splash screen), and all of your old plugins will be available if you copied them over.
I wanted to do this so that, when I don't need 3rd-party plugins (I don't use that many), I can launch in 64-bit mode without having to constantly switch back and forth. It's particularly handy for launching from Lightroom - if I want to do a lens correction that's not in LR yet (and not in PS CS5 until the Camera Raw 6.1 update hits, but that's another story) I can do an "Edit in" that doesn't load plugins and works in 64-bit mode, but when I want to use Viveza, Noiseware, or the Topaz plugins, I can set up a separate "Edit in" pref to launch the 32-bit version.

When attempting to remove the Filmconvert plugin from my machine I noticed my adobe\common\plug-ins\CS5.5\MediaCore folder had Vanished !

When attempting to remove the Filmconvert plugin from my machine I noticed my adobe>common>plug-ins>CS5.5>MediaCore folder had vanished ! and there was also no folder for my cc version at all ? so digging deeper i noticed a large amount of my after effects plugins were installed separately in my applications folder ! I m very confused as to how this has happened and was wondering if anything like this had happened to any1 else ? and how to get everything back to normal ?
Im now worried theres something wrong with my bios on my Mac and i don't no why my plug-ins would have vanished from where they should be installed? as they still work fine in the actual software itself.

If you are on a Mac the Library folder is hidden. You have to jump through some hoops to get there.

I copied my PS CS5 Plug Ins folder into my CS6 one & it started having problems opening & errors...

I copied my PS CS5 Plug Ins folder into my CS6 one & it started having problems opening & errors... would someone be able to tell me what the basic/original ones should be in PS CS^6 Plug In folder please?

That would be any other plug-ins you've installed after Photoshop. Out of the box that folder is completely empty with Photoshop CS6.
To be completely accurate, what you did wrong was that you copied plug-ins that were supplied by Adobe with the earlier version of Photoshop. Those plug-ins logically conflict with the current ones Adobe supplies with Photoshop, which are now provided in another place.
They've changed the folder structure, so no longer are any plug-ins supplied by Adobe put in that folder. Hopefully for a future version update you can copy those you have in Photoshop CS6 without getting yourself into the same trouble.
-Noel

Plug-ins in LR4 not showing

I seem to have a small issue with plugins showing as "Installed and Running" but the Presets aren't showing in the "Export with preset" panel. In particular the two plug-ins are HDR Efex from Nik Software and XRite Color Checker passport.
Everything seems to be OK as another plugin (LR Enfuse) is located in the same Modules folder in the Appdata/Roaming/Adobe/Lightroom foder and shows in the Plug-in Extras panel.
The PC is running Windows 7 x64 and the installation of Lightroom is 4.1 (latest) there is also CS6 etc on the PC and I haven't really had any problems before.
Even if I right click on a photo the two export presets in question don't show in the export panel.
The strange thing though is if I copy the Presets to directories I made in the "Export Presets" folder they show in the export panel under the names of the directories and they work ok.
Is there anyone who can think of a reason for this?

Hi,
I beleive I have come to the root of the problem, the relevant paths and settings folders are:
Library Path: C:\Users\HP-Dv4-DM\Pictures\Lightroom\Lightroom 4 Catalog.lrcat
Settings Folder: C:\Users\HP-Dv4-DM\AppData\Roaming\Adobe\Lightroom
FYI the system info is:
Lightroom version: 4.1 [829322] x64 ,
Operating system: Windows 7 Home Premium Edition x64, Version: 6.1 [7601]
(HP-Dv4-DM is the name of the PC) and it seems that Lightroom doesn't like the name "HP-Dv4-DM" but, short of renaming the PC and removing the user, I cannot work out if it is the "v" or the dashes in the name. The name "HP-Dv4-DM" is just a display name as the disk is not case sensitive so I assume it is the "-" in the name and affects only ".lrplugin" folders with presets in a "presets" folder within the plugin.
I moved the plugins to a folder in the Documents then the Pictures library and it still didn't work so I created a folder on the Root directory "LR-Modules" moved the plugins there and still had the same problem. When I renamed the folder to "LRModules" and reimported the plugins all was fine.
I guess I should report this as a bug? If any Adobe employee reads this give me some advice as to where I should place this.

How can I insert a plug-in in front of already inserted plug-ins?

If I already inserted and edited e. g. 3 plug-ins into an audio object, and now I want to insert another plug-in into the first position (e. g. Melodyne Bridge), how can I do that. In other words: I want the already inserted and edited 3 plug-ins to move to positions 2, 3 and 4, and the new plug-in into position 1.
Best, Dietmar
Power Mac G5 Dual 2.5 GHz Mac OS X (10.4.4)

In the Environment you can move plug-ins if you Control click on the plugin, then press the Apple key down and drag. If you hold down the Option key too, you can copy plug-ins.
Alternatively;
If you don't have a Channel EQ instanced and it's little icon isn't in the area above the first slot, double clicking here will open the Channel EQ and push all the plug-ins down a slot. You can then replace the Channel EQ with the plug-in of your choice.
Regards
Stephen Bennett
Author of:
New Making Music with Logic Pro 7
New Logic Pro Tips and Tricks
Logic Virtual Instruments
Making Music with Your Computer
Published by www.pc-publishing.com

Does Mountain Lion (10.8.4) come with SharePoint plug-ins, or did I just install these?

I did a custom installation of Microsoft Office 2011 for Mac on my MacBook Air running 10.8.4., but I changed my mind and decided to uninstall it.
I only installed Word, Excel, and Proofing Tools (English only).
I'm reading up on how to fully remove all the tidbits Microsoft sprinkled about, and I noticed a couple files on my system:
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
I didn't include SharePoint in the installation, so I'm not sure that's where these files came from. It's a new machine, so the only alternative is that they were included with OS X 10.8.4, in which case I'm inclined to leave them be.
Does anybody know more about these files, where they likely came from?

AFAIK OS X 10.8.4 does not come with SharePoint plug-ins. Those are from Microsoft and are most likely added by SilverLight.
I am running OS X 10.10.1 and Office 14.4.6 and I do not have SilverLight installed... I do not have those two plug-ins you mention. Thus I don't believe Office for the Mac 2011 loaded them.
Hope that helps
Kind Regards, Rich ... http://greatcirclelearning.com

How to install optional plug-ins

I just read in the March issue of Photoshop User magazine about optional plug-ins you can download from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4048. It includes the Contact Sheet II plug-in among others. The article described how to install this plug-in but there are other things included in the Goodies folder that I'd like to install but not sure how. For example, there are textures but I don't see a textures folder where PS CS4 is installed. The readme file doesn't tell you how to install the features. Any help would be appreciated.

most things like textures, actions, brushes etc. can be loaded via the flyout menu in their respective palettes. the little triangle in the upper right corner? click that, you'll see "load textures" or "load brushes" etc.

How to make plug ins show up in the filter menu, several Topaz plug ins are in the 13 plug in folder?

How to make plug ins show up in the filter drop down menu, when several Topaz plug ins have been moved from Elements 11 to the plug in folder for Elements 13?

Thank you for your advice. I followed your directions, but came up with the same results. However, I did discover that whenever I open up the iPhoto Library that is already existing on my MacBook a certain set of pictures shows up. But then when I open up the iPhoto Library from the Hard drive another set of pictures shows up. BUT not ALL of my pictures are showing up on the iPhoto Library from the hard drive. At least the last two years of pictures are not showing up?! Actually, it appears that all the pictures are there from when I started using iPhoto about 5 years ago up until around the time that I got my iMac desktop computer and started using that (2 years ago). I have noticed that more recent videos I have made are showing up in a folder on the hard drive, but will not appear when I open up iMovie?! Any ideas on how to access my pictures from the last 2 years off of the hard drive???

Duplicating/copying plug-ins OR bus sends from channel to channel?

Similar Messages

Maybe you are looking for