Duplicating Doc for Two Across Printing

I have finished a 4 x 8in information card - front page 1 and back page 2. The printer requested that, if possible, I provide a PDF file with the cards two across for printing. I have spent the past two days trying to determine how this could be done, but have failed.
Is this possible and, if so, how do you do it.
Thank you for yur help.
Steve

Export to PDF. Create a new page large enough and place the PDFs.
Then go find yourself a new printer.
Bob

Similar Messages

Setting up document for two-colour printing

I'm creating a document that will be printed using two colours: black and a Pantone ink. In the Swatches panel I have deleted all the swatches except for Black and my Pantone colour (and obviously None, Paper and Registration are still there). I have also created some mixed-ink swatches based on the black and Pantone colour.
I notice, however, that the Ink Manager still displays Cyan, Magenta and Yellow as well as the Black and Pantone. Acrobat's Ink Manager does the same, depsite the Preflight showing that it only produces two plates. (In the Output Preview, only the Black and Pantone channels show coverage, but the crop marks show on all five channels.)
Should I be concerned? Is there a way of setting up a document for two-colour printing that I've missed?
Any advice would be appreciated.

The ink manager is not a problem, bu the mixed colors potentially are, depending on the press being used. Some small 2-color presses use a single blanket and mix the ink on the blanket for overprints (which is what mixed inks are), creating a path for cross-contamination of the inks that can muddy the colors all around. You might want to verify that this will not be a problem on your job.

Best Printer for Two-Sided Printing?

Hi all,
I do a lot of printing of very long documents (up to 300 pages each) - right now I have an Epson CX4800 Inkjet which works very well, but I fear I am running it into the ground. Also, I am going through tons of paper and ink. I'd like to get an inexpensive laser printer (under $300) that can do duplex (two-sided) printing so that I can use less paper when printing out early drafts of projects. I don't want to have to manually flip the pages over and put them back through the printer because I am a ditz and a klutz and always wind up getting the pages in the wrong order when I do this - thus wasting even more paper. I just want a printer that can do automatic two-sided printing for under $300. Am I delusional?
mac mini Mac OS X (10.4.7)

No matter what printer you are going for (please specify if you are looking for a colour or mono laser), the biggest expense you would encounter are consumables: toner, drums, transport belts, fuser unit. The reason you should do that first is that consumers are lured into buying a cheap printer and by the time of the first toner change they have to spend as much money as they did on a printer.
What you have to do first is look around for a printer that has lowest cost for consumables (i.e. lowest cost per page print). The easiest thing to do would be take a supplier of consumables, and write down all the prices for the toner for specific models of printers, then divide them by the number of pages you can print from that toner - in this case you will get a breakdown for each colour: say, a replacement toner costs £50 and yields 4500 prints (with standard 5% page coverage) = 1p per page for that colour. Then compare this costs against the costs of your other candidates and you got yourself the most cost-efficient printer.
Besides that though, you might hav e to spend money on things like drum (lasts for about 25000-40000 pages in SOHO printers) and transfer belt (again, 25000-40000) - but that all depends on a printer, as sometimes toner and drum are separated, so you have to get both, sometimes they are in one set, which cuts your costs.
In my case, I've got a Xerox Phaser 6120, and although it might not be suited for you, it's OK for me as duplex unit can be added on, and I don't do this many prints. In your case my biggest concern would be, as I have said, the prices for consumables.

Printer server for two HP printer on VISTA PC

I have just purchased a Dell pc with the VISTA operation system.
I have two HP printers: HP Laser Jet 4100, Model CAAC049A, Serial # USJNG10352 and a HP business inkjet 2250, Model C2691A#ABA, Serical # SSG095110PR.
I want to set them up so all PC's in the house can access them. I had been using an old Linksys printserver that is no longer support and will not work with VISTA.
Is there any way that I can get these printers set up to work with VISTA and a print server? I know I can add a card to each that will let me use an HP jet direct card. I have also seen a parallel print server for sale on your web site.
What options do I have.

Hi,
Please use this:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=72892&pr...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Imageclass D530 settings for two side printing

My new D530 is set for front and back printing as OFF yet it still prints front and back even though no instructions to do so.
Could this be a driver problem? They have told me my driver sent with the printer is not correct for Windows 8. I tried downloading one from the sight. It did not load. I can print but stuck in double sided mode even though says OFF. Any suggestions?
Solved!
Go to Solution.

Hi jessasdad!
In the Mac OS X operating system, you will need to turn off 2-sided printing in each application. Please follow the steps below:
Click [File], and then [Print] in the application you would like to print from.
Click the drop-down arrow next to [Copies & Pages]or the name of the program. This depends on the program that you are printing from.
Select [Layout].
Set the 2-sided option as [OFF].
Click the "Presets" drop-down arrow and click "Save current setting as preset."
Name it "1-sided" or "Single-Sided" and verify that the imageCLASS D530 is the only printer selected.
Click "OK".
Print the document.
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

PO Output Message type to set default for two output (neu and z_mail)

Hi,
we have a requirement for two output( print output and external send) at the same time when the po saved or me9f, and me99 trigers. kindly guid me the procedure to do this setting in nace,mn04 and spro.
thanks..,

Hi
YOur condiation record should have correctly for that, Genaraly for Email it will ask more then one combination like PO document type and Porg, Doc type/Vendor/Plant
If condiation recocrd id correct then you can get automaitaly when you craete the PO
Tcode for Creation of condiation record is NACR
Bhima

How do I select two-sided printing now that I have Adobe Reader? I didn't know it would change my pr

How do I select two-sided printing now that I have Adobe Reader? I didn't know it would change my print function at all and am curious why it does. My HP printer always did this and on the old screen there was a check off box for two-sided printing. Thank you!

Hello Mickeyps
What's the Adobe Reader version at your end? I am using Reader 11.0.06 and I do see this option. See below.
Regards,
Deepak

Problem with two sided printing

I routinely did two sided printing with my C7280 All-In-One printer, using Vista. But, now that I upgraded to Windows 7, I can no longer do so. When I select two sided printing, a three picture window appears, which instructs me to turn over the odd numbered pages that are printed out first, following by printing of the even numbered pages on the reverse sides of the odd numbered ones. When I use another computer that still has Vista, all works well; i.e., each page is pulled in again, and the second page is printed on the opposite side of the preceding page. I have uploaded the new printer drivers for Windows 7, but still can't get it to automatically print two sided. How can I correct this?

Go to the first post in the link I gave and read the details. In particular:
No option for two-sided printing. The selection for automatic two sided printing may be grayed out, or only manual duplexing is offered. This typically occurs because the duplexer is not recognized as installed, or the driver may default to not installed. To correct this in Vista do the following: go to Start, Control Panel, Printers, right-click on the printer, Run as Administrator, Properties, (continue), Device Settings, Installable Options, set the "Two Sided Duplex Unit" to installed, OK. For Windows 7 the method is similar: go to Start, Devices and Printers, right click on the printer, Printer properties, Device settings, Installable Options, set the "Two Sided Duplex Unit" to installed, OK.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Two sided printing directly from finder?

Hello all
I am having trouble with two-sided printing directly from the Finder on a shared printer over Airport.
I know that I can highlight a file in the finder, then hit CMD-P and it will print the document for me (opening up the program that created it - be it Pages or Word). I can select multiple files and print them this way.
What I *can't* do is get a two-sided document this way.
I have setup a preset for two-sided printing and set it as default. It doesn't matter what program created the document - it just won't duplex print. I have gone into CUPS and set the printer default as two-sided along the long edge.
My printer is a Brother HL-2240D, connected to an iMac running 10.6.8. I am attempting to print files from a Mac Pro (1,1) running 10.7.5, over my Airport network. I can print two-sided by opening the file in the word processor (Word or Pages) and using the Print dialogue, but I can't do it from the Finder.
Can anyone please help?

I forgot to add - I have set up a duplex preset on the iMac (server) as well. I'm not sure if that makes a difference or not...
thanks!

Footer for a report with 2 repeating frames with down/across print directio

I have a report with a frame for title shown in first page. the content of the report is shown on two columns in a repeating frame(R2) which enclose an other repeating frame (R1). In R2, just after R1, I have a frame for totals. Both repeating frame have down/across print direction. All repeating frames and title frame are enclosed by a regular frame(let say frame A) that have vertical elasticity fixed. at the end of the report i must display an other frame(frame B) with signatures. I put frame B in frame A, just after R2. If I set vertical elasticity to fixed or contract for R2, when the title frame is missing i get an empty space in the bottom of the page(except the first page, where the title appear)(R2 is anchored to title frame). if I set vertical elasticity to variable for R2, the frame B is not shown on last page with records, but in next page. I need a solution to keep the frame B in last page of the report which have records. the problem appear only when I have records in second column.
Can somebody help me, please?

Hi,
I think without using Across/Down instead of Down/Across this is not possible. But then the output is
1 2 3 4
5 6 7 8
If you need to have
1 3 5 7
2 4 6 8
then you had to add some logic in an additional column for sorting the output. (sounds easy, but the logic need some work depending the count of records and their position.
Regards
Rainer

Name on print doc for Physical inventory.

Hi All,
When our user run the Trx MI21 for printing the PI doc ... Print doc contains "created by XYZ user " . The XYZ user is not exist in the system . The PI doc belongs to year 2004.
Is it possible to get the ''created by " on the print doc other than the user XYZ who created PI .
Regards,
Amara

the created by is the user who has created the PI doc e.g. with MI01 or MI31 transaction.
The one who executes MI21 does not do anything to the document than printing an already existing document that was created by a different user.
Of course an ABAPer can do all kind of changes to form and programm, but do you really think that it is worth for documents that were created back in 2004?

I can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

i can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

Greetings,
Here's a direct link to the drivers you need, they should work perfectly for your situation.

My computer and the Canon software for my wireless printer can't find my printer which is only two f

My computer and the Canon software for my wireless printer can't find my printer which is only two feet away. What do I do now?

Hi DrLilaB,
So that the Community can help you better, we will need to know what model printer you are using and Computer Operating System. (Windows XP/Vista/7/8 or Mac 10.x)
Any other details you'd like to give will only help the Community better understand your issue!
If this is an urgent support need, please CLICK HERE to reach our friendly Technical Support Team by phone or email.

Docs for Print workbench

Hi,
Can anyone provide me good docs for Print Workbench.
Good docs will be rewarded with points.
regards ,
Vijay

Hi
Go thru this Link.
http://www.sap.com/industries/media/pdf/FICAPWB_EN.pdf#search=%22Print%20Workbench%20in%20SAP%22
Thanks
Sunil

Option for Automatic two sided printing no longer available

Win 7 and HP c7280, Word 2010. Everything worked fine yeasterday but today when I tried to change from one sided to automatic two sided printing I got only two choices, one page or manual two sided. It is set for automatic in the printer properties but in the panel where it asks what you want to print I put in entire documant and then below that it asks for one sided or drop down menu used to say manula or automatic two sided, now it only says manual. What happened and how to I fix it. Printer Setup says the extra atachment is "installed"

Welcome back to the HP Community , I read your post about the print settings that seem to be missing from Word 2010. I have a few ideas in mind that may help you below. 1. Run the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. 2. Uninstalling the Printer Software, restart the PC and reinstall the printer. 3. Print from other programs, and if you find the issue only in Microsoft Word 2010, post this issue in the Microsoft Forums to see if an expert there can help! Microsoft Support Forums: Ask Community I hope this helps!Show thanks for my reply to help you today by hitting the "thumbs up" icon below!

Duplicating Doc for Two Across Printing

Similar Messages

Maybe you are looking for