Duplicating Doc Num field on SAP PLD Collection Report

Hi all
Is there a way to duplicate the Reference field on the SAP Collection report (Customer)
When i do, it doesnt actually show the field..but the text "placeholder"
I also tried to create a new field and linked it to that field.
The customer in on SAP8.82 PL05
Thank you
Jerusha

Hello
The collection report in the customer ageing report.
I basically need to duplicate this field:
Thank you.

Similar Messages

  • SAP B1 Collection Report's crystal report layout printing format

    Hi all,
    We're having an issue in Crystal Report fro SAP Business One - for the Collection (aged-debt) report.
    The report is basically doing the following when previewing it in SAP Business One.
    It prints the header information etc on the first page and then the detailed information filling up the page as expected - it then prints more lines (not filling up the page - maybe 10 lines or so) from the detailed section to the second page (without any headers etc) - then the third page contains headers again with the detailed line data and the fourth then has a couple of lines but without any header data - and so on...
    We've checked the standard page settings - all looks fine.We've checked the section expert - again can't see anything particularly bizarre. It's as though Crystal thinks the page is actually ending someway down the second page!
    Has anyone come across a similar scenario and what would be the solution to this sort of issue?
    Many thanks,
    Mohsen

    Hi Mohsen,
    You may check Selection Expert - Paging tab to see if they have been changed. What is the setting for Report header and Page header?
    Thanks,
    Gordon

  • Update material doc.num in assignment field of GR/IR line item of a/c doc

    HI Experts,
    please tell me the solution for my problem
    My requirement : Transaction is : MIGO
    Before posting of material document, update material document number in assignment field of GR/IR line item of accounting document (WE) at number commitment stage
    Update MKPF-MBLNR (Material Document Number) in BSEG-ZUONR
    but already i tried AC_DOCUMENT i got a problem .
    What i did,
    first use MB_DOCUMENT_BADI with method
    mb_document_before_update.
    here i tried to get the material document and export into memory
    after use AC_DOCUMENT With method
    change_after_check.
    here Import the material document doc num and pass it to Assignment field in
    but it is not working
    when i debug first trigger the AC_DOCUMENT And then it goes to MB_DOCUMENT_BADI
    Plese help me regarding this.
    Moderator message: please open only one thread per issue.
    Edited by: Thomas Zloch on Feb 9, 2012

    Hi,
    Thanks, I will check the same. Well, I will be clearing the documents with reference to MIGO number itself. When I do my delivery chrgs migo, that number I need to be populated in my line item's assignment field. Not only that but I the same number should get populated in the delivery charges miro. Since my miro is with ref to PO it becomes difficult to fetch the field.
    Plz let me know if you can help me on this as well.
    Thanks,
    Priyanka.

  • PLD Text Fields in Collection Report

    Can someone please tell me how the data is populated for the Repetative Area() of the Collection Report?
    When I look at the System Collection Report all of the fields in the Repitive Area() are listed as Free Text.  I'm looking to modify/add some fields from the A/P Invoices but can't figure out how these fields get populated.

    Eric,
    What you are seeing in the collection report is the data that is published dynamically based on your selection criteria.  The Free Text has no relevance and connection to any data type.
    If you want to add values from other tables you can add a database type field and use the link to  area in the field properties to speficy what this new database field links to.
    But the fact is it seldom works well.
    Suda

  • How to create a new field in a PLD.

    Hi,
    We are trying to add some new fields in the collection report PLD.
    How can we add a new field called "Customer/ Vendor Ref No." in the repetitive area of the PLD.
    We need to mention all the PO numbers of the customer when sending the ageing report to them.
    Please advice.
    Regards,
    Jyoti

    Hi Jyothi,
    I believe you want to create a new database field for one of the SAP's Standard report PLD. If so you can go to that reports PLD and create a new field but you can't display the value as PLD works on the basis of Active Screen, meaning it will only display values which are there in the Active Screen.
    So i would suggest you to go for Query and create a print layout for that, or XL Reporter or using Crystal Reports also it is possible.
    regards,
    Shreyas

  • Table containing "NOTES_TABLE_TEXT_PREVIEW_EDITOR" field, in SAP SRM

    Hi all,
    I need to know which is the table containing the "NOTES_TABLE_TEXT_PREVIEW_EDITOR" field in SAP SRM, I found the table "BBP_PDATT" but is not the data I need.
    Thanks .
    Mario

    Hi
    Did you managed to find the solution for the issue.
    We also have a similar situation we have enhanced the datasource to get the follow docs like RFx PO and Contract However, these documents are not being pulled in the delta records.
    Please let me know if you managed to find the solution to this.
    Regards,
    Abhishek

  • Upload fields from SAP R/3 to BW

    Dear All,
    I'm looking for a method to upload fields from SAP R/3 to BI 7.0.
    My testing case as following:
    - Upload table DFKKKO \ field OBEL from R/3 to BW
    - I created a Generic Datasource and select this field.
    - When coming back to BI, I replicate the metadata from SAP source system and can display my Generic Datasource.
    - I create the Info Package for this Generic Datasource but when I run the scheduling, I didn't find any data in PSA table.
    So this is my questions:
    -   Is this method (generic datasource) suitable for uploading from SAP R/3 to BI or there is anything else better?
    - Why the data cannot uploaded to PSA table? (I got this error message from Monitor "EDI: Partner profile inbound not available" and "Some IDocs have error status" but don't know how to correct)
    If there is any possible response, I shall give reward point.
    Many thanks,

    Hi
    I think you have missed the mapping part in BW....did you create the transformation in BW side before loading the date?You have to map the R/3 field to BW infoobject.

  • Search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.

    search criteria is not working in Responsible Group field in sap crm could you please help me this how to achieve.I have writen code on EH_ONSEARCH .as per below...what changess i need to do..and through partner function and adding the selection params please send the sample .
    code. partner funtction - ZRG DATA :
    DATA : lv_partner_fct type .
    types: begin of ty_resp,
           partner    type but000-partner,
           name_last  type but000-name_last,
           name_first type but000-name_first,
           mc_name1   type but000-mc_name1,
           mc_name2   type but000-mc_name2,
           end of ty_resp.
    DATA: lv_resp_bp type STANDARD TABLE OF ty_resp INITIAL SIZE 0,
           lw_resp_bp type ty_resp.
    IF lv_attr_name = 'Rgroup'.
    lr_entity->get_property_as_value( EXPORTING iv_attr_name = if_crm_srqm_uiu_const=>gc_attr_low
                                       IMPORTING ev_result = lv_low ).
    IF lv_low IS INITIAL.
    SELECT partner
           name_last
           name_first
           mc_name1
          mc_name2
    FROM but000 INTO table lv_resp_bp
    WHERE mc_name2 = lv_low and bu_group = '0010'.
    loop at lv_resp_bp into lw_resp_bp.
        lv_low = lw_resp_bp-mc_name2.
      lr_query_service2->add_selection_param( iv_attr_name = 'Rgroup'
                                                iv_sign = lv_sign
                                                iv_option = lv_option
                                                iv_low = lv_low
                                                iv_high = lv_high ).
      ENDLOOP.
    if lv_partner_fct = 'ZRG'.
      lr_entity = lr_iterator->get_next( ).
    CONTINUE.
    ENDIF.
    lv_attr_name = 'BU_PARTNER'.
    ENDIF.

    <b>You can acheive   this .... first by creating the search help exit    ... by  creating the maintaince  view   then   using it in the   Creation of the search help </b> ...
    see the link for attaching the view   to the serach help .
    <a href="http://">http://www.sapdevelopment.co.uk/dictionary/shelp/shelp_elementary.htm</a>
    reward  points if it is usefull...
    Girish

  • How to use the distinct key in formula field in SAP Crystal Reports

    I want to use the distinct key in formula field in SAP Crystal reports.
    When i'm using it shows an error.
    Please suggest me....

    Hi,
    Use DistinctCount keyword directly for your calculation instead of count(distinct(....
    Alternatively, if you want to avoid duplicate records, under "File" > "Report Options" make the 'Select Distinct Records' as True.
    Thanks,
    Raghavendra

  • Changing the label of a field in SAP GUI

    Hello SAP Guys,
    I would like to change the label of a field in SAP GUI.
    I already did it internally because for that field the Shor Text of the label changed:
    I went to SE11, and wrote down the appropriate data element, through Translation I changed the entries of SCRTEXT_L, SCRTEXT_M and SCRTEXT_S and activated this change after saving.
    It is very strange that after making sure that the
    Short Text of that field was changed, I went to trx BP and I could see that the label didn´t change.
    I´ll appreciate any help you can give me,
    Regards,
    Efrain

    Hi Efrain,
    Can you tell me in which screen did you make the screen.
    Moreover the changes are not reflected immediately.
    What you can try is to create a new record of the transaction in which you changed the label and save the recore. After this try to close the session and reopen the transaction and this should work.
    The reason is the label on the screen are not picked up from the data element everytime but from buffer. So when you create a record this updates the database table entry and can also refresh the buffer.
    I had the same problem in BP transaction and the above solution worked.
    Let me know if this helps.
    Jash.

  • How to creat a Data provider  based on different fields in SAP BW ?

    Hi,
    Experts,
    There are  20 fields  of  Plant Maintainace  like : 
    SWERK
    BEBER
    STORT
    TPLNR
    EQUNR
    INGRP
    QMDAT   ---peroid
    STTXT
    QMDAT  - Date of Notification
    QMNUM
    QMTXT
    QMART
    AUSVN
    AUZTV
    AUSBS
    AUZTB
    AUSZT
    ERNAM
    QMDAB
    AUFNR
    I  want to creat a  Report based upon these fields  ?
    For that I h'v  checked the relevant Fields to the   existing standard  Datasource  in Bw side   &
    Checked  cubes   created  based upon these Datasource  in Bw side !
    i h'v found  some fields are  existing different cubes & some are  missing .
    How to creat a Data provider  based on different fields in SAP BW ?
    plz suggest      !!!!!!!
    Thanx,
    Asit
    Edited by: ASIT_SAP on Jul 15, 2011 6:25 AM
    Edited by: ASIT_SAP on Jul 15, 2011 6:27 AM
    Edited by: ASIT_SAP on Jul 15, 2011 12:37 PM

    Hi Lee, Please see below..
    DECLARE @Machine2 TABLE
    DispatchDate DATE
    INSERT INTO @Machine2 VALUES ('2014/02/01'), ('2014/02/02'), ('2014/02/03')
    DECLARE @DateFrom DATE
    SELECT @DateFrom = DATEADD(D,1,MAX(DispatchDate)) FROM @Machine2
    SELECT @DateFrom AS DateFrom
    Please mark as answer, if this has helped you solve the issue.
    Good Luck :) .. visit www.sqlsaga.com for more t-sql code snippets and BI related how to articles.

  • Custom field in SAP Inbox

    Hi Experts,
    I have a requirement of adding a custom field in SAP Inbox.
    Ex: If an Invoice Wrok flow is triggered..the Invoice number number will be generated and it will be shown in the Title column.
          Now I have a requiremnt of adding a two Custom field as 'Supplier Name' and 'Document number'.
    1. Is it possible to add the custom field in SAP Inbox?? if Yes can you guys let me know the procedure?? Also if I add a custom field Can that be controlled for specific work flow?
    2. Also I have seen the field Dynamic Columns in in the layout, Can I use that filed to populated the Supplier name and document number?? is Yes how to proceed further?? ( Does the efforts vary for Standard workflow and Custom Work flow??
    Your <removed by moderator> response is higly appriciated.
    Cheers,
    Sriram.
    Edited by: Thomas Zloch on Jul 4, 2011 4:18 PM

    Hi Krishna,
    To solve your issue, you need to know the linkage between the WF and event.
    You can go to t-code SWE2 to find the event linkage between Workflow & Business Object event.
    You can also open t-code PFTC, select the task type as Worflow Template and give the TASK / WF number without prefix WS, then go to EVENT tab to know the event.
    Regards
    Saumya

  • How to change the lenth of existing field in sap standard table

    Hi all,
    can anybody help,my requirement is, how to change the length of existing field in sap standard table....
    thanks in advance..

    Which field are you thinking of in particular?  Are you wanting to increase or decrease the length?
    Some fields are used so extensively that a change to their length will mean adjusting many tables, some of them potentially very large, and hence taking a long time to adjust.
    Some standard SAP programs expect certain fields to be of specific lengths and won't work if the length is changed.
    Some screens could cease to work.
    If you decrease length, then you could lose data.
    matt

  • How to populate custom fields in SAP standard Basic type DELFOR01(E1EDK09)

    I've a requirement to include and populate 2 custom fields in SAP standard basic type DELFOR01 and Segment E1EDK09 (it is at hierarchy level 1 ) .
    The requirement looks very simple but for this, as per my knowledge, I have to create a new  Basic type with the copy of segment E1EDK09 and attach it to outbound process code and write my own function module to populate the segments.
    It seems ok but the there are some existing codes in the user-exits for the SAP standard function module.These codes will not get triggered.(Or I've copy the user-exits code in my FM)
    Can we do it any other way to handle this kind of situation?
    Thanks in advance for your suggestions and help.

    Hi Phani,
    You have done it correctly. ECC additional data to be moved to EWM, 1. you need to enhance the CIF for master data/ bapi  to populate the data in the custom field in EWM. 2. Make your your are not enhancing only one structure. You need to do it in the CI includes so that the field is available in all the related tables/structures.
    3. The BAPI/FM which updated these tables will take care automatically to update the custom field data if the field is correctly added in all the tables.
    4. If the custom fields are added correctly and still the data is not getting saved , then need to check the mapping of the custom field and bepi extension.
    Let me know if this helps.

  • How to add new fields in sap copied standard form using itcsy structure

    hi guys,
      i want add some fields in sap script copied standard form using itcsy structure.
    let me know the procedure with any example.
    thanks,
    anitha.

    Hii anitha
    plz c code below
    Syntax goes like this
    /: PERFORM <form> IN PROGRAM <prog>
    /: USING &INVAR1&
    /: USING &INVAR2&
    /: CHANGING &OUTVAR1&
    /: CHANGING &OUTVAR2&
    /: ENDPERFORM
    INVAR1 and INVAR2 are variable symbols and may be of any of the four SAPscript symbol types.
    OUTVAR1 and OUTVAR2 are local text symbols and must therefore be character strings.
    Example:
    In script form
    /: PERFORM READ_TEXTS IN PROGRAM 'Z08M1_FORM_EKFORM1'
    /: USING &EKKO-EKORG&
    /: USING &EKPO-WERKS&
    /: USING &EKKO-EKGRP&
    /: USING &EKKO-BSTYP&
    /: CHANGING &COMPNAME&
    /: CHANGING &SENDADR&
    /: CHANGING &INVCADR&
    /: CHANGING &COMPADR&
    /: CHANGING &COVERLTR&
    /: CHANGING &SHIPADR&
    /: CHANGING &REMINDER&
    /: CHANGING &REJECTION&
    /: CHANGING &POSTADR&
    /: CHANGING &LOGO&
    /: ENDPERFORM
    In program
    FORM Read_texts - To extract the standard texts from the table *
    FORM READ_TEXTS TABLES IN_PAR STRUCTURE ITCSY
    OUT_PAR STRUCTURE ITCSY.
    DATA : L_EKORG TYPE EKORG,
    L_WERKS TYPE WERKS_D,
    L_BSTYP TYPE BSTYP,
    L_EKGRP TYPE BKGRP.
    READ TABLE IN_PAR WITH KEY 'EKKO-EKORG' .
    CHECK SY-SUBRC = 0.
    L_EKORG = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY 'EKPO-WERKS' .
    CHECK SY-SUBRC = 0.
    L_WERKS = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY 'EKKO-EKGRP' .
    CHECK SY-SUBRC = 0.
    L_EKGRP = IN_PAR-VALUE.
    READ TABLE IN_PAR WITH KEY 'EKKO-BSTYP' .
    CHECK SY-SUBRC = 0.
    L_BSTYP = IN_PAR-VALUE.
    CLEAR Z08M1_ORG_TEXTS.
    SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
    AND WERKS = L_WERKS
    AND EKGRP = L_EKGRP
    AND BSTYP = L_BSTYP.
    IF SY-SUBRC NE 0.
    SELECT SINGLE * FROM Z08M1_ORG_TEXTS WHERE EKORG = L_EKORG
    AND WERKS = L_WERKS
    AND EKGRP = L_EKGRP
    AND BSTYP = SPACE.
    ENDIF.
    READ TABLE OUT_PAR WITH KEY 'COMPNAME'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COMP.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'SENDADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_ADRS.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'INVCADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_INVC.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'COMPADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_CPAD.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'COVERLTR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_COVR.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'SHIPADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_SHIP.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'REMINDER'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RMDR.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'REJECTION'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_RJCT.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'POSTADR'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_POST.
    MODIFY OUT_PAR INDEX SY-TABIX.
    READ TABLE OUT_PAR WITH KEY 'LOGO'.
    OUT_PAR-VALUE = Z08M1_ORG_TEXTS-TXT_LOGO.
    MODIFY OUT_PAR INDEX SY-TABIX.
    ENDFORM.
    reward points if useful
    regards
    Jaipal

Maybe you are looking for