Duplicating layers to new larger image

Hi-
Cutting my teeth using Photoshop CW4 on my first project using a professional printer and I made an image size mistake because I didn't read the printer's requirements (won't do that again). I made my image size without the bleed factored in. So I needed to enlarge the orginal 350 dpi image from 1400 x 3150 to 1435 x 3185 to compensate for bleed. I'm so new at this... and not wanting to compromise the image quality, the only safe thing I could think of was to create a new image with the proper dimensions and dpi, and then duplicate the original layers into the new image. But, I'm not sure if that really was the safe way to preserve the image quality. I've got two questions:
1. Will there be any loss in the way that I did it?
2. How would you have remedied the problem?
Thanks from a newb!

Hi, Up North.
Long time, no reply. But this might help.
I don't think you need to do the image over. You are increasing the size by less than 3%. You want to enlarge with your preferences set to Bicubic Smoother. New pixels will be created, but the effect on the image should be minimal. Only you can decide if the result is acceptable.
One problem. You are increasing the dimension size by 50 pixels on each axis. The short side of the image will be stretched a little more than the long side, percentage wise. So the enlarged image will have a slightly different aspect ratio than the original.
FWIW.
Peace,
Lee

Similar Messages

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history pa

When a pop up window comes up it is - search bookmarks and history window! I cannot log into my bank as login button should open new window to log in but I get the search page. I cannot see larger images as again I get the search bookmarks and history page etc. Happens on all options that should open new page. I am so frustrated, this has been happening since Firefox updated itself 2 days ago to Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8 ( .NET CLR 3.5.30729; .NET4.0C) was fine before that. using windows vista. Can you please advise what I should do? Also can you go back to previous version? Error console eg
Warning: Error in parsing value for 'cursor'. Declaration dropped.
Source File: https://ib.nab.com.au/nabib/styles/menu_nab.css?id=009
Line: 116
ib.nab.com.au : server does not support RFC 5746, see CVE-2009-3555 and Warning: Selector expected. Ruleset ignored due to bad selector.
Source File: https://ib.nab.com.au/nabib/styles/nabstyle.css?id=014
Line: 837
== This happened ==
Every time Firefox opened
== 2 days ago after update.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Large image in lightbox opens in new window

I added a lightbox gallery to my site and it was working fine. Then, I tried to add more thumbnails and that's when problems started. Some of the larger images wouldnt load at all so I then started over with a new page/gallery, deleted files off the server and tried uploading again. The quirky thing is that the gallery works fine on my computer but when I upload it onto the server and view it from the web it doesn't work correctly. The larger images open up in a new window Im guessing that I'm missing something on the server but I don't know what. I reuploaded everything on the local server and still nothing. Can anyone help?

I finally got it to work by deleting files off the remote and uploading again. Thought I did that last night but I guess this morning I did something right that I had missed.

Spry Gallery - how to get large image to open in a new window?

Hey guys,
I'm building a new website and decided to use Spry for the Gallery section. It works like a charm but I want to get the larger version of the image to open in a new window when someone clicks on the normal image? It shouldn't be that difficult but I'm lost. Can anyone help?
I believe I have to put a <a href> infront of the image something like this:
<div id="picture">
<div id="mainImageOutline" style="width: 0px; height: 0px;"><a href="?????" target="_blank" id="??????"><img id="mainImage" alt="main image" src=""/></a></div>
</div>
and something to the XML file...
<photo
path = "1.jpg"
width = "300"
height = "400"
thumbpath = "1.jpg"
thumbwidth = "56"
thumbheight = "75"
large = "galleries/xyz/large/1.jpg" <------- this is the large image I want to open in a new windows
>
</photo>
thanks!!

Actually, the site is for my friend and she really likes this Gallery: http://labs.adobe.com/technologies/spry/demos/gallery/index-air.html
I just want to keep this one and just edit it, so when I click on the image it opens the large image...

Viewing Larger Image Version / in New Window/Tab

I have added in the links to larger image files to my lower res images. When I click those images in Preview it takes me out of the page and to a new window to view the larger image. Will this larger image be viewed in antoher tab/window? I see the option to click "Open in new Window/Tab" in the hyperlinks menu. I have not activated that for each image link. Should I?
I want to make sure I don't leave the site and don't maintain a tab to get bak to the page I was on after I view a larger image.

Yes you will need to do it for each link. Wether it opens in a new tab or a new window really depends on what browser the user is using and how they have it set up.

When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

So frustrated!!!! mouseover to display larger image

I've searched all day for the answer, been sent 400 lines of
code that I couldnt understand, read the tutorials... got nowhere.
so, here we go...
I have 3 images. 'Front.gif' 'back.gif' and 'detail.gif. I
sell dresses. I want the user to be able to click on the small gif
'front' and for the large image of the front of the dress to appear
(on the same page but different location to front.gif). Then the
user clicks on 'back.gif' and the front picture of the dress is
replaced with the back view. then repeat for the 'detailed' view of
the dress.
all pictures/photos the the dress (front, back and detail)
are the same size.
I've tried layers, rollovers, swaps, crazy code that got me
half way. I feel like dreamweaver is laughing at me saying "just
click on that blue button and thats it"!!!!!
thanks, kitty

"Michael Fesser" <[email protected]> wrote in message
news:[email protected]...
> .oO(P@tty Ayers ~ACE)
>
>>"Michael Fesser" <[email protected]> wrote in
message
>>news:[email protected]...
>>
>>> I understood it like this: There are some small
pictures and a single
>>> area to show a large image. If you click a small
image, a larger version
>>> will appear in that specific area of the page.
The same thing happens if
>>> you use the eBay gallery to attach multiple
images to an auction.
>>
>>Well, here's what she said:
>>
>>[...]
>
> I know what she said. Question is how you understood it.
I've understood
> it the way I described and how I've seen it done many
times on all kinds
> of websites: shops, eBay, galleries, even Flickr albums
look like that.
>
>>Clicking a small picture of the front of a dress
makes a similar larger
>>image appear. So far so good.
>>Then, say I'd like to see a picture of the back of
the dress, and a
>>detailed
>>view. How can I find those? Pretty much only by
random guessing and
>>clicking
>>everywhere, because to see the back you have to click
on the front, and to
>>see the detailed view you have to click on the back
view.
>
> Ah, that's the ... hmm ... what is "des Pudels Kern" in
English?
> www.dict.cc suggests "The gist of the matter"? Anyway.
>
> Of course this would be a confusing and user-unfriendly
design. But it's
> not how I understood the OP. To me it seemed to be
intended more like
> this:
>
> +--------+ +-----------------------------+
> | | | |
> | front | | |
> | | | |
> +--------+ | |
> +--------+ | |
> | | | |
> | back | | big image |
> | | | |
> +--------+ | |
> +--------+ | |
> | | | |
> | detail | | |
> | | | |
> +--------+ +-----------------------------+
>
> As said - quite common.
>
> At least I think I've understood your interpretation of
the original
> posting now and the problems you see with it. Now it's
up to the OP to
> make things clearer. ;)
>
> Micha
Ok, maybe you're right.
Patty Ayers | www.WebDevBiz.com
Free Articles on the Business of Web Development
Web Design Contract, Estimate Request Form, Estimate
Worksheet

Larger image on mouse over

Hi,
I've got a map of the US divided into 5 territories. On mouse
over each territory, I want to display a larger picture of that
territory in a new window over that spot on the map. (I've got the
map and the five larger graphics as separate files.)
I thought I could draw the hot spots on the base map and
assign them behaviors -- I see Open New Window in Behaviors. The
only option it gives me is to open the new pic as a URL, replacing
the main window.
Is the answer the show/hide command? I see my list of
available graphics -- can I get the larger pics in there somehow?
Or give up in Dreamweaver and figure it out in Flash? Help
appreciated beyond words. ttt

> Is the answer the show/hide command?
Yes.
You would have to put the larger images into hidden layers
and toggle their
visibility.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"templemedia37" <[email protected]> wrote in
message
news:g175hh$jdu$[email protected]..
> Hi,
>
> I've got a map of the US divided into 5 territories. On
mouse over each
> territory, I want to display a larger picture of that
territory in a new
> window
> over that spot on the map. (I've got the map and the
five larger graphics
> as
> separate files.)
>
> I thought I could draw the hot spots on the base map and
assign them
> behaviors
> -- I see Open New Window in Behaviors. The only option
it gives me is to
> open
> the new pic as a URL, replacing the main window.
>
> Is the answer the show/hide command? I see my list of
available
> graphics --
> can I get the larger pics in there somehow? Or give up
in Dreamweaver and
> figure it out in Flash? Help appreciated beyond words.
ttt
>

Crash when duplicating layers?

I've only had InDesign installed and been learning it for the last 2-3 weeks, on a new Mac Mini (so I'm not pumped with processing power) but I don't think I'm asking the software & hardware to do too much...
I do repetative tasks as a designer, one of them is duplicating layers prior to sending a file to press (to outline fonts, flatten images, etc.) Seems like 1 out of 10 times I have duplicated a layer in the InDesign Layer Window - by drag and dropping the layer onto the New Layer icon, to duplicate - it causes InDesign to stop responding and ultimately forces an unsaved quit.
Has any one else had this happen or can duplicate the error?

There is unfortunately quite a few reports of crashing in CS5, a lot seem to be when manipulating pages, see these posts here, here and here. Have a read of those and see if anything applies, there are a few fixes for certain circumstances.

Button to b clicked and large image shown on the stage(link to swf file here)

I have a button when clicked is supposed to show a larger image of the button/ I am new to the code and think if I could see and example it would help. This is a school project. I am failing as of now.
how do I upload my files to here so I can show http://threadcontent.next.ecollege.com/(NEXT(54b34a37e8))/Main/CourseMode/Thread/DownloadA ttachment.ed?virtualFileId=961613945&GoldenTicketParams=_u=8538800;_dt=634657009144447173; virtualFileIDs=956864518,956864621,956864990,960296914,960355361,960465721,960465764,96037 9092,961379343,960908613,961013978,961014291,961613945,961035853,961618981,961042519,96144 4490,961569920,961629398,961629452;&GoldenTicketSignature=35-AA-34-CE-10-A6-FD-4F-D1-DD-73 -4C-A9-EF-8D-9D-63-E5-87-88-FB-D4-4D-15-06-BB-82-8A-9E-F2-36-DC
I believe this is the download link to the swf I have you can see the buttons click and sound and over and when pressed they are supposed to show the larger image of the buttons original image that you see before you hover

stop();
trail_btn.addEventListener(MouseEvent.CLICK,
trail);
function trail(event:MouseEvent):void
gotoAndStop(10);
and the link I gave is the download link from my class at AI Online its perfectly fine

How to increase performance speed of Photoshop CS6 v13.0.6 with trasformations in LARGE image files (25,000 X 50,000 pixels) on IMac3.4 GHz Intel Core i7, 16 GB memory, Mac OS 10.7.5? Should I purchase a MacPro?

I have hundreds of these large image files to process. I frequently use SKEW, WARP, IMAGE ROTATION features in Photoshop. I process the files ONE AT A TIME and have only Photoshop running on my IMac. Most of the time I am watching SLOW progress bars to complete the transformations.
I have allocated as much memory as I have (about 14GB) exclusively to Photoshop using the performance preferences panel. Does anyone have a trick for speeding up the processing of these files--or is my only solution to buy a faster Mac--like the new Mac Pro?

I have hundreds of these large image files to process. I frequently use SKEW, WARP, IMAGE ROTATION features in Photoshop. I process the files ONE AT A TIME and have only Photoshop running on my IMac. Most of the time I am watching SLOW progress bars to complete the transformations.
I have allocated as much memory as I have (about 14GB) exclusively to Photoshop using the performance preferences panel. Does anyone have a trick for speeding up the processing of these files--or is my only solution to buy a faster Mac--like the new Mac Pro?

HTML hovering over thumbnail to bring up larger image on top of it. How?

I am new to site and first question. So hope not too silly. I wish to have lots of small thumbnails on page and when mouse hovers over each individual thumbnail it will enlarge into a larger image - on top of the thumbnail mouse is over. Thanks to Nancy O answering Bravats question on this, I found the following HTML from Nancy, however..... am darned if I am able to have the image hover exactly over the thumbnail. Not to left, not to right, etc etc, but over top of thumbnail. Can someone please tell me what to put in where to make this happen? Thank you.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>Disjointed Image Rollovers</title>
<style type="text/css">
/**BEGIN DISJOINTED IMAGE ROLLOVERS**/
#rollover a {
border:none;
text-decoration:none;
padding: 0 0.5em 0 0.5em; /**space between small icons**/
/**remove this rule if all full size images are to share the same display area. **/
#rollover a span {
visibility:hidden;
background-color: #FFF;
display:block;
position: absolute;
/**adjust location of full size images**/
left: 50%;
top: 50%;
/**optional full size image captions**/
font-size: 12px;
line-height: 1.2;
color:#666;
text-align: center;
/**optional full size image borders, padding**/
border: 5px solid orange;
padding: 5px;
#rollover a:hover span, #rollover a:active span, #rollover a:focus span {visibility:visible;}
#rollover a:hover, #rollover a:focus
{visibility:visible;}
/**END DISJOINTED ROLLOVERS**/
</style>
</head>
<body>

<div id="rollover">
<p>
<a href="#"><img src="SmallIcons/image.png" alt="some description" /><span><img src="FullSize/image.jpg" alt=" " /><br />optional caption #1</span></a>
<a href="#"><img src="SmallIcons/image.png" alt="some description" /><span><img src="FullSize/image.jpg" alt=" " /><br />optional caption #2</span></a>
<a href="#"><img src="SmallIcons/image.png" alt="some description" /><span><img src="FullSize/image.jpg" alt=" " /><br />optional caption #3</span></a>
</p>
</div>

</body>
</html>

Here is my Demo. http://alt-web.com/DEMOS/CSS-Disjointed-Image-Rollover.shtml
First, #rollover a needs to have position:relative.
Second, you will need to tweak left & top values to suit your needs.
#rollover a span {
visibility:hidden;
background-color: #FFF;
display:block;
position: absolute;
/**adjust positioning of full size images in px or %**/
left: 0px;
top: -140px;
For better answers, we need a link to your page.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Illustrator Image Trace doesn't work with large images

Illustrator's Image Trace doesn't seem to work at all with large images. The attached image shows the following:
A) The original raster cropped tightly.
B) Converting the raster with default "Black and White Logo" settings. Results in 242 paths and 4792 anchors.
C) Adding a massive amount of white space and then converting the raster with default "Black and White Logo" settings. Results in 407 paths and 1620 anchors.
For whatever reason Illustrator can't seem to handle large images. This test shows it's not an issue with the image being too complex since all I've done is add white space and the file was saved without compression so there should be no noise.
This type of glitch started with CS6 with the new Image Trace tool. Is there a fix for this? Maybe setting Image Trace into legacy mode?

Moving to Illustrator forum.

Trying to link a thumbnail in one frame to a larger image in another frame GOLIVE 9...

Hi.
I am using Adobe Golive 9.
I found a tutorial on the internet that allows you to create an image gallery with clickable thumbnails
http://www.tutorialhero.com/click-48179-create_an_image_gallery_with_clickable_thumbnails. php
However, the tutorial is designed for a page without frames.
I want to be able to do this using frames.
I want to link a thumbnail on a page in one frame to a larger image on another page, so that when your mouse is over the thumbnail,
the larger version appears in the other frame.
This is what my frames look like so you get an idea of what I'm trying to do
And here is a picture of the thumbnail in the lower frame and the larger image in the frame above it.
Could someone please give me STEP BY STEP instructions on how to do this? I'm new to Golive, using version GOLIVE 9, and I know this can be accomplished using "Set Image URL" but have no idea how to do it.
Thank you for your help all.
Chris.

A link in one frame is designed to call another page into some other frame, not an image. You can't use SetImageUrl across different pages. You'd probably have to put each of your large images on a page, and call each page each time. I'm not sure why you're so set on using frames, they have many disadvantages.

Text is cut off or disappear in large images

Issue
Text is cut off or does not appear on a type layer in large images (e.g.,
400 MB) in Adobe Photoshop 5.x>.
Solutions:
Do one of the following:
Solution 1
Change anti-aliasing in the type layer:
1 Double-click the type layer.
2. In Photoshop 5.5>, select None, Crisp, or Strong from the Anti-Alias
pop-up menu in the Type Tool dialog box. In Photoshop 5.0.2, deselect
Anti-Aliased in the Type Tool dialog box.
3. Click OK.
Solution 2
Move the type layer, open the Type Tool dialog box, click OK, and then move
the layer back:
1. Select the move tool.
2. Move the type layer to the left until all the text is off the image.
3. Double-click the type layer.
4. Click OK in the Type Tool dialog box.
5. Move the type layer back with the move tool. Do not move it back using
the History palette.
Solution 3
Create the text using the type mask tool and fill the selection:
1. Select the type mask tool and click in your image.
2. Enter your text in the Type Tool dialog box. Click OK.
3. Move the type selection to the desired location. If you can see part of
the text on the existing type layer, you can use it as a guide to position
the type selection.
4. Select the layer on which you want the text to appear.
5. Select a foreground color for the type.
6. Choose Edit > Fill.
7. Chose Select > Deselect.
8. Remove the original type layer.
Solution 4
Create the text in Photoshop 5.0 or earlier, or in another application.
Then, import the text into Photoshop 5.x and remove the original type layer.
Additional Information
The type tool cannot create anti-aliased text larger than 8192 pixels on the
image canvas in Photoshop 5.x, although it can in earlier versions. The type
mask tool, however, can create selections that exceed this limit. You can
fill type mask selections to create pixels in the shape of type, but these
pixels are not editable in the Type Tool dialog box and do not appear on a
new Type layer.
(Adobe Tech doc # )

It has something to do with Segoe fonts in your Windows system.
Refer to this link from itunesTRK for solution on windows 7:
https://discussions.apple.com/thread/3782135

Duplicating layers to new larger image

Similar Messages

Maybe you are looking for