Duplication error in FMBB

Hi FM experts
this morning, i found the BUED_DOCNR was not incresed until above 70 budget documents were generated. so i have created the budget documents continuosely for monitoring the number range. suddenly, i had met duplication error when i save the budget document using FMBB. (maybe 101th budget document)
now, after saving document, system message said that the budget document number was restarted with 1 but, it caused the duplication error.
the strange thing is that BUED_DOCNR is increased now ??? but, still the duplicaiton errors were happened. because 97 budget documents were already saved in SYSTEM. could you explain this situaiton? nobody touched the number range.
and the current IMG setting was same with a previous project's one.
regards,
MK

Hi , thanks for your advice regarding the RFFMKU_DOC_DOUBLE_ANALYSER program.
but, in my case,   there were no duplication documents in system now so the program did not produce duplication documents.
i am testing the system before go-live, i made several budget documents and those were saved successfully. but   yesterday, i found that BUED_DOCNR(budget doc no object) was 0. it was not not increased by system fault or someone touched it.
anyways,   BUED_DOCNR object is working successfully now, so the duplication error was happened as i saved new budget document starting with document number 1.
i don;t think someone reset BUED_DOCNR.   i want to know whether this case is often come out without manual work or not.
if someone reset the BUED_DOCNR by mistake, i will increase the current BUED_DOCNR right now and   the duplication error will not be happened.
if not human error, i am afraid that the BUED_DOCNR is suddenly reset by system fault
Regards,
MK
Edited by: MK on Nov 5, 2010 7:49 AM
Edited by: MK on Nov 5, 2010 7:50 AM

Similar Messages

Duplication Error while loading data in write optimized DSO

Hi Experts,
I have an issue.In BI7 I'm trying to load the data in a WRITE OPTIMIZED ODS from the controlling data source 0CO_OM_CCA_10. I'm getting the data properly in PSA, but while loading it into my WODSO i'm getting the duplication error although my keys fields and data fields are properly placed in my data target(WODSO).
pls let me know what is the solution to load it successfully.
Thanks in Advance.
Amit

Hi,
thanks for your reply
I'm getting this error message:
Diagnosis
    During loading, there was a key violation. You tried to save more than
    one data record with the same semantic key.
    The problematic (newly loaded) data record has the following properties:
    o   DataStore object: GWFDSR02
    o   Request: DTPR_4BA3GF8JMQFVQ8YUENNZX3VG5
    o   Data package: 000006
    o   Data record number: 101
Although i have selected the key fields which identifies unique record,then also i'm getting the duplication error.
Even i have reffered to the BI content for this data source and found that it has the same key fields as of mine.
Debjani: i need unique records without duplication and i'm doing a full load in DTP.
What is to be done pls help
Thanks in advance.
Edited by: Amit Kotwani on Sep 26, 2008 10:56 AM

Run time error in FMBB after execution of RGZZGLUX GETWA_NOT_ASSIGNED FM

Hello Experts,
We have activated funds management in Development it is working fine without any issues. Transported same changes to Quality system and executed Program RGZZGLUX.
Issue: Run time error in FMBB transaction code even after execution of program RGZZGLUX. similar error in funds center group also.
Category               ABAP Programming Error
Runtime Errors         GETWA_NOT_ASSIGNED
ABAP Program           SAPLFMBD_DATABASE_ACCESS
Application Component PSM-FM-BCS-BU
Date and Time          10.06.2014 13:28:36
Short text
    Field symbol has not yet been assigned.
Requirement: Please let us know how to solve this issue
we have checked note:0000939958 - and changed Inactive status for tables FMIT, FMIP and FMIA, but no use, when we run program RGZZGLUX, it has deactivated this tables again.
Regards,
Chalapathi

Hello Shyam / Javed,
Thank you for your inputs.
I have solved issue, now it is working fine.
Activated EA-PS and included into transport request. executed program RGZZGLUX.
Note used to solve issue :0000908007
Regards,
Chalapathi

Seq Header Duplication error when trying to burn dvd

I am using DVD Studio Pro 4
Mac OS 10.49
I imported a 36 minute QT video edited in FCP to DVDSP. When I try to burn a DVD, I get an error message that reads, " Seq Header Duplincation. I cannot figure out the problem.
Incidently, the 30 minute DVD seems to contain 7.4 GB on my hard drive, but DVDSP converts it to 3GB automatically. Does this sound customary?
Thanks,
Schoff

ocfilmmaker, I hear you. I am trying to run DVD Studio Pro on my new Mac Pro under Leopard and I am having nothing but problems. It always worked fine on my G5 iMac. First, it won't recognize my DVD burner (there have been several posts about that) and now I'm seeing the "Seq Header Duplication" error, with no further explanation. My video is already encoded. I don't know whether it is the Xeon, Leopard, or the latest build - but this thing is useless right now.

Seq Header Duplication error on build

does anyone know what this error is or how to fix it?
Compiling VTS#7 (fbi)...
Writing VTS070.VOB
Muxing VTS071.VOB
Seq Header Duplication
the simulator works perfectly, but when I am going to burn the disk I get this error when it tries to mux one of my tracks.
thanks

Hi Thomas,
Not really a helpful message and with DVDSP not neccessarily a helpful one.
A few things to try before reencoding your VTS 7 material.
Close DVDSP. Delete the PAR folders associated with the project and reopen. This forces DVDSP to reparse your mpegs.
Secondly remove the video from VTS 7, Then simply replace it. When DVDSP links files to tracks on certain occassions it drops the ball when reseting the GOPS causing errors.
Thirdly for a test (or you can do it first). Place some different material in the track.
If all this fails. Duplicate the project and try and open it from the duplicate.

Path duplication error

Howdy,
As far as I'm aware, I've successfully installed and
configured Alchemy, with aft -vesion check working, the
alchemy-setup being run on login, up until the point of compiling
the string echo sample.
When I attempt the compile I get the following error:
c1 error:
/usr/lib/alchemy/usr/lib/alchemy/avm2-libc/avm2/AVM2Env.h
Which in turn causes many libraries to not be found. That
above path of the AVM2Env.h library though, has a duplication of
the $ALCHEMY_HOME directory '/usr/lib/alchemy/', which I'm sure is
causing the error.
Could this duplication be corrected in a config file or is it
being dynamically constructed - perhaps a problem with my $PATH?
I have a full write up of my installation process here:
http://hibbins.wordpress.com/2008/12/02/find-a-way

hi, see here ;)
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=72&catid=755&threadid =1406714&enterthread=y

Zpools and drive duplication error.

I have a system that is running Solaris 10 Update 3 TX with 1 zpool and 5 zones. Everything on it is running fine. I take the drive to my disk duplicator and dupe it bit by bit to another drive, put the newly duped drive in the same machine and boot it up everything boots up fine. Then I do a zpool status the status is FAULTED, I get the error insufficient replicas. The slice it is mounted to is c0d0s4 and it's error is cannot open. The action stated is use the zpool online command but that does not work. Also brining up format is states that c0d0s4 is used for a zpool. I checked with the manufacture of the drive duplicator to see if there was any known issues with ZFS and their machine and it didn't sound like the tech had ever heard of ZFS. But I have it set to do a bit by bit copy with a checksum verification when it completes. Does anyone happen to have an idea of why this may be failing?

On alot of our systems, we make one master drive and the duplicate it for the rest of our machines. Afterward we run some scripts that changes the machine name, ip,etc.All of the other machines are identical. This works fine with UFS.
Message was edited by:
tinman2k

Image Map duplication error

I have a curious problem with image maps. Whenever they are
placed in the top of the page, in a table, they are duplicated and
offset in the bottom of the page and vice versa. If I draw an IM
for example in the bottom of the page there is a hot spot created
with the same link in the top of the page in the first table row.
If I delete the unwanted hot spot (duplicate) it removes the
wanted IM.
If I delete the image in the bottom table it seems that when
I added a Flash button the top IM then had no problem. In Photoshop
there are no maps in the image.
Is this due to a #div container, padding, floats, or
something ?
Here is the map code;
<map name="Map" id="Map"><area shape="rect"
coords="48,137,293,167" href="../color/index.html" target="_top"
alt="blah"
onclick="MM_nbGroup('down','group1','navBarRLink02','',1)"
onmouseover="MM_nbGroup('over','navBarRLink02','images/cmO_02.jpg','',1)"
onmouseout="MM_nbGroup('out')" /><area shape="rect"
coords="134,110,329,134" href="../HP9180_review.htm" target="_top"
alt="printer reviews"
onclick="MM_nbGroup('down','group1','navBarRLink02','',1)"
onmouseover="MM_nbGroup('over','navBarRLink02','images/printerO_02.jpg','',1)"
onmouseout="MM_nbGroup('out')" /><area shape="rect"
coords="207,67,332,93" href="portraits.html" target="_top"
alt="portraits"
onclick="MM_nbGroup('down','group1','navBarRLink02','',1)"
onmouseover="MM_nbGroup('over','navBarRLink02','images/portraitsO_02.jpg','',1)"
onmouseout="MM_nbGroup('out')" />
<area shape="rect" coords="231,42,328,67"
href="stills.html" target="_top" alt="stills"
onclick="MM_nbGroup('down','group1','navBarRLink02','',1)"
onmouseover="MM_nbGroup('over','navBarRLink02','images/stillsO_02.jpg','',1)"
onmouseout="MM_nbGroup('out')" />
<area shape="rect" coords="246,16,344,40"
href="beauty.html" target="_top" alt="beauty"
onclick="MM_nbGroup('down','group1','navBarRLink02','',1)"
onmouseover="MM_nbGroup('over','navBarRLink02','images/navBarR_02.jpg','',1)"
onmouseout="MM_nbGroup('out')" />
</map></body>
</html>

Your narrative is too vague to follow. Sorry.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Neil Snape" <[email protected]> wrote in
message
news:g0shio$sg4$[email protected]..
> Unfortunately I didn't save the original html page that
was doing this.
> Thanks for your replies though.
>
> What I did was delete the Td, and TR, more than once ,
then rather than
> importing the same image just added a background image.
I was then able to
> place two Flash buttons into the TR, and no duplication
of the hot zones.
> After
> deleting the Flash buttons I was able to add two text
zones and place hot
> zones
> over the text whereas before they were duplicating and
deplacing the
> zones.
> Strange, I have no idea why, but it works as expected
now.
>

User id duplication error

Hi,
I have created two users A&B in OIM 10g 9102 BP17. Now when i try to see the user resource profile of one user A is showing another user account B in manage user page. I do not know wither this is a bug or provisioning error?
replies are appreciated!!!

Hi,
This is probably due to the setting of value for
ume.usermapping.unsecure
in the UME configuration.
Please check <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=51257">this</a> forum thread for more info.
Regards,
Igor

Scanner Duplication error

I have a Scanner in the LEFT Column (of Apple Remote Desktop Admin 3.7.latest) for each of my Remote Servers.
Works fine on all but one iMac where two of the Scanners keep defaulting to the same information.
Scanner LONDON is correct
Scanner PARIS has Scanner London details all the time.
Even if I delete the Scanner PARIS and remake it.
Like I say, other Macs are OK with Remote Desktop Admin setup this way with the same settings.
This one iMac won't play.
Is there some preferences or settings for ARD Admin I can knock out completely?
Thank you,
Message was edited by: James Rothschild

Hi @heavym357 , and welcome to the HP Forums.
I see you are having scanner 22 errors. I also see you'ver covered most of the troubleshooting already. Due to the fact this appears to be a firmware failure, I'd recommend giving us a call.
You can utilize this website to learn how to contact us appropriately, based on your region:
Contact HP Worldwide
Thanks!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Cant burn dvd( seq header duplication) error

how do i fix this, what does it mean?..

Take a look at this:
https://discussions.apple.com/thread/750897?start=0&tstart=0

How to resolve ORA-00001 Error in SQL Insert?

Hi all, I need your appreciated help.
I make a plsql procedure that is inserting a row according cursor value, I'm having oracle error ORA-00001: unique constraint (constraint_name) violated.
You may see this message if a duplicate entry exists at a different level: in RDBMS MySQL I have the syntax IGNORE to resolve this duplication error... and in Oracle ?
Thanks for your time and hints.
Miguelito

user6317803 wrote:
How to resolve ORA-00001 Error in SQL Insert?ORA-00001 means table has unique/primary key/index and you are trying to insert a row with key value that already exists in the table. I'll assume table COUNTRIES has primary key on COUNTRY_ID. Then change SQL to:
SQL = "INSERT INTO COUNTRIES(COUNTRY_ID,COUNTRY_NAME,REGION_ID) SELECT 'BZ','BLZ',3 FROM DUAL WHERE NOT EXISTS(SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID = 'BZ')"There is a good chance table COUNTRIES also has unique key/index on COUNTRY_NAME. If so use:
SQL = "INSERT INTO COUNTRIES(COUNTRY_ID,COUNTRY_NAME,REGION_ID) SELECT 'BZ','BLZ',3 FROM DUAL WHERE NOT EXISTS(SELECT 1 FROM COUNTRIES WHERE COUNTRY_ID = 'BZ' OR COUNTRY_NAME = 'BLZ')"SY.

Error message: 1021: Duplicate function definition.

Hi All,
First let me start by saying that I know next to nothing about Flash. I have inherited a website maintenance project that has a Flash rotating image banner. I have managed to get the images to fade-in and fade-out correctly, but now I need to make these images clickable - linking images to pages in the website. I have read many posts here and have reviewed the video tutorials. I have been able to get the first image clickable using this AS3 action:
mars_btn.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent) :void {
        navigateToURL(new URLRequest("http://somewebsite/mars.php"));
        trace("I'm clicked");
However, when I attempt to make another image clickable by using a different instance of a button I get the error message:
1021: Duplicate function definition.
I have a separate instance of a button with this AS3 action:
jupiter_btn.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent) :void {
        navigateToURL(new URLRequest("http://somewebsite/jupiter.php"));
        trace("I'm clicked");
Obviously I'm not understanding how I'm supposed to do this so that I don't create a duplicate function definition. Any help would be most appreciated.

excuse me , I have a question i hope that you help .. ( im new in here )
we were asked to create an interactive application on flash in two languages..
so i created two different fla files same exact codings ... i was wondering how can i combine them so the viewer can be able to choose the language from a button ?
when i try to combine them i get lots of errors of duplications in the actionscript
PS : MY MAIN PAGE INCLUDES A CAROUSEL with images ..
I was thinking of saving one of the fla as a movie and then add it some how to the second fla and combine it with a button but i can't figure it how..
i hope i was clear enough.. but is there any possibility to help me please ?!
when i tend to change names or something it creates error.. ( IM NOT A PRO IN AS3 ) and when i dublicate the scenes it give duplication errors.. WHAT IS THE SOLUTION ??
this is the code of the actionscript in the main page.. ( the carousel's code i took from someone ) and i used it on my project
import com.ccanvas.carousel.*;
var centerX:Number = stage.stageWidth/4;
var centerY:Number = stage.stageHeight/4;
var carc:Carousel = new Carousel(centerX, centerY, 256, 75, "icons.xml");
carc.addTooltip(new tooltip); // use 'tooltip' movieclip for item tooltip
addChild(carc); // add carousel to stage
function down(event:MouseEvent):void {
trace(event.currentTarget.toolText); // simple click interaction
function destroyCarousel(event:MouseEvent):void {
carc.destroy(); // remove all item in carousel as well as tooltip
function removeNextItem(event:MouseEvent):void {
if(carc.numOfItems > 2) {
carc.removeItem(2); // remove the item next to the remove item icon
create.addEventListener("mouseDown", createCarousel);
function createCarousel(event:MouseEvent):void {
if(carc.CREATED == false) {
// recreate the carousel
carc = new Carousel(centerX, centerY, 256, 75, "icons.xml");
carc.addTooltip(new tooltip);
addChild(carc);
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
Tools_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToScene);
function fl_ClickToGoToScene(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Toolse");
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
games_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToGames);
function fl_ClickToGoToGames(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Gamese");
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
Identity_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToIdentity);
function fl_ClickToGoToIdentity(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Identitye");
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
Reviews_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToScene_13);
function fl_ClickToGoToScene_13(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Reviewse");
}/* Click to Go to Scene and Play
Clicking on the specified symbol instance plays the movie from the specified scene and frame.
Instructions:
1. Replace "Scene 3" with the name of the scene you would like play.
2. Replace 1 with the frame number you would like the movie to play from in the specified scene.
Facts_button.addEventListener(MouseEvent.CLICK, fl_ClickToGoToScene_20);
function fl_ClickToGoToScene_20(event:MouseEvent):void
MovieClip(this.root).gotoAndPlay(1, "Factse");

JavaFX Update Line Chart on Tab pane

Hi all,
I am wondering can anybody help with this problem.
I have an application that can create a new tab when the LineChart FXML view is called by way of onMouseClicked event from a bar graph (using scenebuilder). However, I need this Line chart to update when the user clicks a new bar on the bar graph page to show this new data.
Initially the Line chart tab will open and display data from the first bar graph click and when I click another bar in Tab A (bar chart) if it has the same number of rows it will refresh the LineChart tab otherwise I get an error. Then if I try to load another line graph tab using a different bar graph as the source I get a child duplication error
(So tab A has a bar graph that calls tab B to represent data as a line graph, however it wont do it more then once when there is a different number of points to show)
(Also tab C, another Bar chart will not load a new tab) Exceptions below & Class detail below.
I am using clear() to empty the observable list I have which is used to populate the graph and table before it reads in the new data values
What is the proper way/ best way to dynamically add another tab and update the chart in the tab with new values? Any help would be appreciated.
I am getting the following exceptions:
Exception in thread "JavaFX Application Thread" java.lang.IndexOutOfBoundsException: Index: 11, Size: 7
at java.util.ArrayList.rangeCheckForAdd(ArrayList.java:661)
at java.util.ArrayList.add(ArrayList.java:473)
at com.sun.javafx.collections.ObservableListWrapper.doAdd(ObservableListWrapper.java:101)
at javafx.collections.ModifiableObservableListBase.add(ModifiableObservableListBase.java:151)
at com.sun.javafx.collections.VetoableListDecorator.add(VetoableListDecorator.java:320)
at com.sun.javafx.scene.control.skin.TabPaneSkin$TabHeaderArea.addTab(TabPaneSkin.java:854)
at com.sun.javafx.scene.control.skin.TabPaneSkin$TabHeaderArea.access$500(TabPaneSkin.java:659)
at com.sun.javafx.scene.control.skin.TabPaneSkin.addTabs(TabPaneSkin.java:276)
at com.sun.javafx.scene.control.skin.TabPaneSkin.lambda$initializeTabListener$463(TabPaneSkin.java:357)
at com.sun.javafx.scene.control.skin.TabPaneSkin$$Lambda$108/885312968.onChanged(Unknown Source)
at com.sun.javafx.collections.ListListenerHelper$Generic.fireValueChangedEvent(ListListenerHelper.java:329)
at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:73)
at javafx.collections.ObservableListBase.fireChange(ObservableListBase.java:233)
at javafx.collections.ListChangeBuilder.commit(ListChangeBuilder.java:482)
at javafx.collections.ListChangeBuilder.endChange(ListChangeBuilder.java:541)
at javafx.collections.ObservableListBase.endChange(ObservableListBase.java:205)
at javafx.collections.ModifiableObservableListBase.add(ModifiableObservableListBase.java:155)
at java.util.AbstractList.add(AbstractList.java:108)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:262)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:241)
at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(CompositeEventHandler.java:86)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:238)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:191)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(CompositeEventDispatcher.java:59)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:58)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:54)
at javafx.event.Event.fireEvent(Event.java:198)
at javafx.scene.Scene$ClickGenerator.postProcess(Scene.java:3437)
at javafx.scene.Scene$ClickGenerator.access$7900(Scene.java:3365)
at javafx.scene.Scene$MouseHandler.process(Scene.java:3733)
at javafx.scene.Scene$MouseHandler.access$1500(Scene.java:3452)
at javafx.scene.Scene.impl_processMouseEvent(Scene.java:1728)
at javafx.scene.Scene$ScenePeerListener.mouseEvent(Scene.java:2461)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:348)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:273)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleMouseEvent(GlassViewEventHandler.java:382)
at com.sun.glass.ui.View.handleMouseEvent(View.java:553)
at com.sun.glass.ui.View.notifyMouse(View.java:925)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.lambda$null$141(WinApplication.java:102)
at com.sun.glass.ui.win.WinApplication$$Lambda$37/1146743572.run(Unknown Source)
at java.lang.Thread.run(Thread.java:745)
Exception in thread "JavaFX Application Thread" java.lang.NullPointerException
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:263)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:241)
at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(CompositeEventHandler.java:86)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:238)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:191)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(CompositeEventDispatcher.java:59)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:58)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:54)
at javafx.event.Event.fireEvent(Event.java:198)
at javafx.scene.Scene$ClickGenerator.postProcess(Scene.java:3437)
at javafx.scene.Scene$ClickGenerator.access$7900(Scene.java:3365)
at javafx.scene.Scene$MouseHandler.process(Scene.java:3733)
at javafx.scene.Scene$MouseHandler.access$1500(Scene.java:3452)
at javafx.scene.Scene.impl_processMouseEvent(Scene.java:1728)
at javafx.scene.Scene$ScenePeerListener.mouseEvent(Scene.java:2461)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:348)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:273)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleMouseEvent(GlassViewEventHandler.java:382)
at com.sun.glass.ui.View.handleMouseEvent(View.java:553)
at com.sun.glass.ui.View.notifyMouse(View.java:925)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.lambda$null$141(WinApplication.java:102)
at com.sun.glass.ui.win.WinApplication$$Lambda$37/1146743572.run(Unknown Source)
at java.lang.Thread.run(Thread.java:745)
Class Information:
//Call to the Line chart graph
n.setOnMouseClicked(new EventHandler<MouseEvent>()
                @Override
                public void handle ( MouseEvent e )
                    String s1 = dt.getXValue();
                    String s = s1.trim();
                    if ( baseHash.containsKey(s) )
                        String value = (String) baseHash.get(s);
                        String hashValue = value.substring(6, 38);
                        System.out.println(hashValue);
                        FXMLLineChartController.setHash(hashValue);
                         try
                              lineTab .setText("Line Graph (Rows Read)");
                              lineTab.setContent(FXMLLoader.load(getClass().getResource("/javafxapplication2/FXMLLineChart.fxml")));
                              Node aNode = (Node) e.getSource();
                              Scene scene = aNode.getScene();
                              thisTabPane = (TabPane) scene.lookup("#tabPane");
                              thisTabPane.getTabs().add(lineTab);
                              selectionModel.selectLast();
                              //throw new UnsupportedOperationException("Not supported yet."); //To change body of generated methods, choose Tools | Templates.
                          catch ( IOException ex )
                              Logger.getLogger(FXMLWrittenChartController.class.getName()).log(Level.SEVERE, null, ex);
//Line Chart controller
//Create the Graph
    @FXML
    private LineChart barChart;
public void populateGraph ()
        System.out.println("Populate graph Line Chart");
        final CategoryAxis xAxis = new CategoryAxis();
        final NumberAxis yAxis = new NumberAxis();
        ObservableList<XYChart.Series<String, Number>> barChartData = FXCollections.observableArrayList();
        barChartData.clear();
        baseHash.clear();
        xAxis.setLabel("Query");
        yAxis.setLabel("Number of Executions");
        series1.setName("Data from User DB2 for Query " +getHash() );
        for ( int i = 0; i < userLine.size(); i++ )
                System.out.println(getHash() + " Usersize = " + userLine.size() + " base size " +baseLine.size());
                series1.getData().add(new XYChart.Data<String, Number>(userLine.get(i).getBuildNumber(), (userLine.get(i).getDYN_Num_Executions())));
        barChartData.add(series1);
        barChart.setData(barChartData);

Hi all,
I am wondering can anybody help with this problem.
I have an application that can create a new tab when the LineChart FXML view is called by way of onMouseClicked event from a bar graph (using scenebuilder). However, I need this Line chart to update when the user clicks a new bar on the bar graph page to show this new data.
Initially the Line chart tab will open and display data from the first bar graph click and when I click another bar in Tab A (bar chart) if it has the same number of rows it will refresh the LineChart tab otherwise I get an error. Then if I try to load another line graph tab using a different bar graph as the source I get a child duplication error
(So tab A has a bar graph that calls tab B to represent data as a line graph, however it wont do it more then once when there is a different number of points to show)
(Also tab C, another Bar chart will not load a new tab) Exceptions below & Class detail below.
I am using clear() to empty the observable list I have which is used to populate the graph and table before it reads in the new data values
What is the proper way/ best way to dynamically add another tab and update the chart in the tab with new values? Any help would be appreciated.
I am getting the following exceptions:
Exception in thread "JavaFX Application Thread" java.lang.IndexOutOfBoundsException: Index: 11, Size: 7
at java.util.ArrayList.rangeCheckForAdd(ArrayList.java:661)
at java.util.ArrayList.add(ArrayList.java:473)
at com.sun.javafx.collections.ObservableListWrapper.doAdd(ObservableListWrapper.java:101)
at javafx.collections.ModifiableObservableListBase.add(ModifiableObservableListBase.java:151)
at com.sun.javafx.collections.VetoableListDecorator.add(VetoableListDecorator.java:320)
at com.sun.javafx.scene.control.skin.TabPaneSkin$TabHeaderArea.addTab(TabPaneSkin.java:854)
at com.sun.javafx.scene.control.skin.TabPaneSkin$TabHeaderArea.access$500(TabPaneSkin.java:659)
at com.sun.javafx.scene.control.skin.TabPaneSkin.addTabs(TabPaneSkin.java:276)
at com.sun.javafx.scene.control.skin.TabPaneSkin.lambda$initializeTabListener$463(TabPaneSkin.java:357)
at com.sun.javafx.scene.control.skin.TabPaneSkin$$Lambda$108/885312968.onChanged(Unknown Source)
at com.sun.javafx.collections.ListListenerHelper$Generic.fireValueChangedEvent(ListListenerHelper.java:329)
at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:73)
at javafx.collections.ObservableListBase.fireChange(ObservableListBase.java:233)
at javafx.collections.ListChangeBuilder.commit(ListChangeBuilder.java:482)
at javafx.collections.ListChangeBuilder.endChange(ListChangeBuilder.java:541)
at javafx.collections.ObservableListBase.endChange(ObservableListBase.java:205)
at javafx.collections.ModifiableObservableListBase.add(ModifiableObservableListBase.java:155)
at java.util.AbstractList.add(AbstractList.java:108)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:262)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:241)
at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(CompositeEventHandler.java:86)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:238)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:191)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(CompositeEventDispatcher.java:59)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:58)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:54)
at javafx.event.Event.fireEvent(Event.java:198)
at javafx.scene.Scene$ClickGenerator.postProcess(Scene.java:3437)
at javafx.scene.Scene$ClickGenerator.access$7900(Scene.java:3365)
at javafx.scene.Scene$MouseHandler.process(Scene.java:3733)
at javafx.scene.Scene$MouseHandler.access$1500(Scene.java:3452)
at javafx.scene.Scene.impl_processMouseEvent(Scene.java:1728)
at javafx.scene.Scene$ScenePeerListener.mouseEvent(Scene.java:2461)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:348)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:273)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleMouseEvent(GlassViewEventHandler.java:382)
at com.sun.glass.ui.View.handleMouseEvent(View.java:553)
at com.sun.glass.ui.View.notifyMouse(View.java:925)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.lambda$null$141(WinApplication.java:102)
at com.sun.glass.ui.win.WinApplication$$Lambda$37/1146743572.run(Unknown Source)
at java.lang.Thread.run(Thread.java:745)
Exception in thread "JavaFX Application Thread" java.lang.NullPointerException
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:263)
at javafxapplication2.FXMLExecutionChartController$3.handle(FXMLExecutionChartController.java:241)
at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(CompositeEventHandler.java:86)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:238)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:191)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(CompositeEventDispatcher.java:59)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:58)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:54)
at javafx.event.Event.fireEvent(Event.java:198)
at javafx.scene.Scene$ClickGenerator.postProcess(Scene.java:3437)
at javafx.scene.Scene$ClickGenerator.access$7900(Scene.java:3365)
at javafx.scene.Scene$MouseHandler.process(Scene.java:3733)
at javafx.scene.Scene$MouseHandler.access$1500(Scene.java:3452)
at javafx.scene.Scene.impl_processMouseEvent(Scene.java:1728)
at javafx.scene.Scene$ScenePeerListener.mouseEvent(Scene.java:2461)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:348)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$MouseEventNotification.run(GlassViewEventHandler.java:273)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleMouseEvent(GlassViewEventHandler.java:382)
at com.sun.glass.ui.View.handleMouseEvent(View.java:553)
at com.sun.glass.ui.View.notifyMouse(View.java:925)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.lambda$null$141(WinApplication.java:102)
at com.sun.glass.ui.win.WinApplication$$Lambda$37/1146743572.run(Unknown Source)
at java.lang.Thread.run(Thread.java:745)
Class Information:
//Call to the Line chart graph
n.setOnMouseClicked(new EventHandler<MouseEvent>()
                @Override
                public void handle ( MouseEvent e )
                    String s1 = dt.getXValue();
                    String s = s1.trim();
                    if ( baseHash.containsKey(s) )
                        String value = (String) baseHash.get(s);
                        String hashValue = value.substring(6, 38);
                        System.out.println(hashValue);
                        FXMLLineChartController.setHash(hashValue);
                         try
                              lineTab .setText("Line Graph (Rows Read)");
                              lineTab.setContent(FXMLLoader.load(getClass().getResource("/javafxapplication2/FXMLLineChart.fxml")));
                              Node aNode = (Node) e.getSource();
                              Scene scene = aNode.getScene();
                              thisTabPane = (TabPane) scene.lookup("#tabPane");
                              thisTabPane.getTabs().add(lineTab);
                              selectionModel.selectLast();
                              //throw new UnsupportedOperationException("Not supported yet."); //To change body of generated methods, choose Tools | Templates.
                          catch ( IOException ex )
                              Logger.getLogger(FXMLWrittenChartController.class.getName()).log(Level.SEVERE, null, ex);
//Line Chart controller
//Create the Graph
    @FXML
    private LineChart barChart;
public void populateGraph ()
        System.out.println("Populate graph Line Chart");
        final CategoryAxis xAxis = new CategoryAxis();
        final NumberAxis yAxis = new NumberAxis();
        ObservableList<XYChart.Series<String, Number>> barChartData = FXCollections.observableArrayList();
        barChartData.clear();
        baseHash.clear();
        xAxis.setLabel("Query");
        yAxis.setLabel("Number of Executions");
        series1.setName("Data from User DB2 for Query " +getHash() );
        for ( int i = 0; i < userLine.size(); i++ )
                System.out.println(getHash() + " Usersize = " + userLine.size() + " base size " +baseLine.size());
                series1.getData().add(new XYChart.Data<String, Number>(userLine.get(i).getBuildNumber(), (userLine.get(i).getDYN_Num_Executions())));
        barChartData.add(series1);
        barChart.setData(barChartData);

Handling Relationships in What-If Analysis Worksheets.

Hi All,
I am currently working on a rulebase in OPM v10.4 where we have used quite a few relationships and the final output for the rulebase rests on certain selections in these relationships.
Global
| ->The Company Employee
|--------------> The Company Employee's Position
          (Relationships - the company employee is the manager of(Many to Many),
          the company employee is the team lead of(Many to Many),
          the company employee is the project manager of(Many to Many))
I am testing the same using what-if analysis worksheets but i am facing some issues.
1. I can't see any of these "*relatioships*" when I select "*Add Columns*" in the "*the company employee*" or "*The Company Employee's Position*" worksheets.
2. When I select "*Add Worksheet*" and then check "*the company employee is the manager of*" or "*the company employee is the team lead of*" or "*the company employee is the project manager of*", I am able to add a new worksheet with these name but when I try to select "*Add Columns*" in any of these worksheets then I get an message which says "*All 'the company employee is the manager of' columns are already selected*". I get similar messages for all the relationship worksheets.
I am not able to find a way to test my rulebase using the what-if analysis worksheets as I am not able input the "*Relationships*" that I have used in the rulebase anywhere in the What-If analysis worksheet(s).
Any pointers on this will be of great help.
Thanks
Bijay Mishra
Edited by: 993514 on Mar 13, 2013 2:38 AM
Edited by: 993514 on Mar 13, 2013 2:39 AM
Edited by: 993514 on Mar 13, 2013 10:52 PM
Edited by: 993514 on Mar 14, 2013 4:42 AM

Hi Frank,
Thank you very much for the reply.
In my rulebase all the relationships that I am using have the same "Source" and "Target". It is "the company employee". Right now I have removed the entity"the company employee's position" which was contained by "the company employee" just to make it simpler to explain.
So all the relationships I am using under "the company employee" have the same "Source" and "Target",i.e. "the company employee".
Here's the new structure(Nothing has changed wrt the relationships though):
Global
|------------>the company employee
+(Relationships - the company employee is the manager of(Many to Many),+
the company employee is the team lead of(Many to Many),
the company employee is the project manager of(Many to Many))
So when I am adding a worksheet for the relationship lets say "the company employee is the manager of(Many to Many)" I am getting one column "the company employee #". But as our "Target" and "Source" is the same we can't add a duplicate column "the company employee #". It throws a duplication error we do and rightly so.
Even in the Oracle Policy Modeling User's Guide which I always refer to, the "Source Entity" and the "Target Entity" are different. Something which is not the same in my case.
How to make it work in this case????
Thanks Again Frank
Looking forward to your response. It would of great help.
Thanks
Bijay Mishra
Edited by: Bijay Mishra on Mar 15, 2013 12:00 AM
Edited by: Bijay Mishra on Mar 15, 2013 4:10 AM

Duplication error in FMBB

Similar Messages

Maybe you are looking for