Duplication of 3rd party themes

After installing iWork 06, I noticed that all the third party themes I had installed in Keynote from IWork 05 are still there, but now all of them are duplicated. Anyone know how to fix this problem short of deleting and reinstalling all of them?
Powermac g5 1.8 dual Mac OS X (10.4.4)

I had the same problem - there were duplicate themes folders in applications/support/keynote/themes in the route and individual library folders; I deleted one of them and everything is fine.
iMac G5 Mac OS X (10.4.4)

Similar Messages

Help! 3rd Party themes on N95 8gb!

Just got the N95 8gb and trying to install 3rd party themes. I can install it on the phone, but when I go to themes in setting the themes that were shipped with the phone are the only themes their.
Help. Am I doing anything wrong and are the themes still on the phone?
Any Help muchly appreciated.
Regards,
Sami

check if softaware installation is set to all and not signed only. online certificate check should be off. you can find these setting via menu, settings, applications, app. manager.
Have you managed to install any other application software ever since you got the phone and does it work? also check wherther the theme is for N95 and not a general theme. you can get more themes from www.zedge.net
If an error pops up saying certificate expired or something just change the date of ur phone to 2006 and then install... then set it back to 2007
can't wait for n97 successor

How do I get my iWork'09 3rd party Keynote themes into Keynote 6.0?

1. I had iWork '09 installed on my computer from the old installation disk. It was not clear at the keynote that I would receive the updates for free as I already owned them. I was expecting to see the updates when I opened up the App Store, but they were not there which gave the impression that I was SOL since I didn't purchase them through the App Store. I even received the message "[App name] is already installed, purchase anyway?", but that message is cryptic and not clear that I was going to receive the update, so I wound up purchasing the iWork apps again, just to wake up this morning to find out that I should have received them for free. I am truly hoping for a refund, because at $20 each, that's a big difference between that and free.
2. I opened up keynote to play with the new features, but because the internal architecture is different, it no long references my old themes folder in Library > Application Support > iWork > Keynote. I have tried copying the files to other permutations of possible reference folders in the global and user libraries, but have had no success. These 3rd party themes were not cheap either. I'm sure there is a way to get them to show up in the Keynote Theme Selector, but I haven't stumbled on it yet. Does anyone have any suggestions?

Thanks for the link to the troubleshooting tips! It contained the correct answer which is:
"If your documents or changes still don’t appear, try creating a new document on your iOS device, and then check again for existing documents from iCloud to appear".
I created a test document in Pages and when I returned to my documents all the documents from iCloud reappeared.

Australis - Begins now the big death of Adons and Third Party Themes?

Following the Nightly and Aurora Series with Big Interest. And after checking out now the Nightly UX with the more advanced parts of Australis seen in Preview...
Will there afterwards still be Themes and Adons available? I know that Mozilla plans to simplify the Browser since "Every Day's Computer Users could feel overloaded" - But is that really necessary that you break lot of Adons and most of the Complete 3rd Party Themes?
Not one single 3d Party Theme i tried with UX does work anymore, no problem with Aurora Alphas and normal Nightly.
You really should perhaps also think about the more advanced Users, because taking that beloved features away from us, to make Firefox more Google Chrome simple similiar - does not only good things!
So please, do not plan to remove Adons and Theme Support!

There is a user discussion of recent UX / Australis changes starting here:<br />
http://forums.mozillazine.org/viewtopic.php?f=23&t=2593247&start=45
Nightly - Aurora - Beta is the direct development path to the Firefox Release versions. Whereas Australis / UX is a 'side path' for experimentation and development off of the direct path to Firefox. Changes seen in UX ''(or Ash or Birch or Maple or Elm)'' may never get to the Firefox Release stage, and if they do the Add-on developers will need to make the necessary changes for compatibility as they do now when changes are made on the Nightly - Aurora - Beta - Firefox Release path.

Pc is not recognising PDF file ( icon ) in emails and to open these it is loading a 3rd party program on the web. I have installed Adobe several times. To open my files I need to drag them to my Adobe program. any ideas??

Pc is not recognize PDF file ( icon ) in emails and to open these it is loading a 3rd party program on the web. I have installed Adobe several times. To open my files I need to drag them to my Adobe program. any ideas??

Hi aadeshs
This problem is on my laptop running Vista ( Business) on Adobe 10.0 , for many years I did NOT have a problem with this . No forum Pages on this.
Also i would like to know how screen readers can better interact with PDF as my wife has difficultys on some email attachments on her laptop , again there seems no easy avenue for someone in her situation surfing websites and forums for Hours maybe ok ok for sighted people, but not if you are blind & use a screenreader. No Support Help from Adobe is available.
thanks
oliver654837

3rd Party iMovie 6 Themes

I'm looking for iMovie Themes from 3rd party developers. But I can't find any. Does somebody know if there are any?
Peter

mwh71057 wrote:
… but HATE new iMovie....
me too, when iMovie-b appeared, 5y ago, as iM08.
(I posted here a 'first look' review .... ooohhh, I was grumpy!)
it was just a demo for a complete new approach to the theme 'how to edit?', misleading with the same name as iM-a, the dv-editor.-
vers09 brought back basics as slowmo ....
vers11 is a nice hobbyist tool.
vers13 will hopefully bring back support of plug-ins …-
and iMovie-b was an excellent preparation for switching to FinalCutProX, which was 2y ago 'iMovie on steroids'!
no wonder - same creator … all major video-editors (Premiere, FC/p, FC/e, iM-a, iM-b, FCPX) were designed by the same person!
.... it needs a while to get comfortable - but then you will never go back! What you need is a start from the ground, with an "I have no idea of editing!"-attitude, and stsart by 0.- ......
enjoy movie making!

Are there 3rd party effects plugins available as part of the cloud or do I have to buy them?

Are there 3rd party effect plugins available as part of the Creative Cloud membership or do I have to buy them directly from the provider? I like a lot of the stuff I see on Video Copilot. I'm new here and my guess is I have to buy them there, but want to make sure I'm not overlooking something here.

There are a lot of plug-ins available in AE and I would highly recommend learning the basics before you start buying 3rd party effects. Without a really good understanding of how AE works, what the UI is used for, and getting a bit of a handle on how to compose and edit animations you're going to be just parking your investment for a while until you learn how to use AE. I could easily fill up the two or three semesters in a Masters program at a university with nothing more than what comes with AE.
If you have a very specific need for a very specific effect and your are under a deadline then it's often advisable to purchase a effect, but if you are intent on learning how to animate, composite and create magic then just about anything you have seen can be created with the standard set of plug-ins.

Cineform and other 3rd party plugins for Creative Cloud, what happened to them?

Hi I don't want to panic but I just downloaded Adobe Premiere CC and it's telling me that I've rendered my previous project with a 3rd party plugin that isn't available. What is the process of installing my 3rd party plugins to premiere so I can edit with Blackmagic codecs, Cineform, and multiple others I have enjoyed using in CS6.

I followed the instructions from the Cineform site as given by scarolan_CS4 (thanks for that).
http://support.cineform.com/entries/24336007-A-Do-It-Yourself-Guide-to -adding-CineForm-support-in-Adobe-CC-Windows-
Works like a charm.
The only issues I have are:
Cineform plugs (except for levels) don't work. But they didn't work on CS5.5 and CS6 either - plus cá change.
I'm getting the 'saving metadata' when closing PP error back - I'd forgotten how I'd dealt with that, switched something off in prefs, if I remember (more internet searching!) This wasn't happening before I copied the Cineform directories to their CC locations, so I suspect it's related in some way.
The editing presets and the rendering presets all work fine.
======================================
I've also had good luck with other 3rd party plugins. I created a junction type link from C:\Program Files\Adobe\Common\Plug-ins\CS6\MediaCore to C:\Program Files\Adobe\Common\Plug-ins\7.0\MediaCore. The default mediacore directory is empty so this works, but I copied across 3rd party directories and files in the individual plugin folders for PP and AE as there are default Adobe files in there which may be different from CS6 to CC.
Note that I also created a junction from Photoshop 64 plugins for CS6 to CC and this also works a treat.
Just thought I'd mention it to show that it can work, I'm chuffed that it does as I was anticipating a system OS install to enable plugins to work and to keep 15-20% of my system SSD free.
If this junction stuff is too complicated (and you don't mind having two sets of the same files or deleting the older versions) just copy the plugin and relevant settings files instead. I assume this will work, although I haven't specifically tested it myself.
You can find free utilities to create junction links for Windows or this can be done via the command line. I forget the name of the utility I use, it works via the context menu. I have found that junction tends to work better than symbolic linking or other types of file 'aliasing' for most of my fumbling about with this solution.
This stuff sounds more complicated than it is, once someone has given the steps to take and you have installed the junction/symbolic linking utility it's just a matter of following the steps.
EDIT - I (re-)found the solution to the
Metadata. Metadata writing in progress (n files pending)
error -
Go to Edit>Preferences>Media and uncheck Write XMP ID to Files on Import (thanks to Jim Simon on this forum for this).

3rd party tools

Hi SDNers!!!!
Can anybody tell me what are the various 3rd party tool available that can be used with MDM for data validation\quality\cleansing etc. and a brief description about these tools.
Is there anydocs available for them in market.
Thanks & Regards
Dilmit Kaur Chadha

Hi,
There are multiple third party tools that can be used with MDM for data management, but before considering these tools in he landscape, one must do a thorough comparision of Requirements vs MDM capabilities.
SAP MDM comes with a good combination of functionalities for cleansing, de-duplication, enrichment etc.
Third Party Tools:
Data Cleansing
1. FirstLogic
2. Trillium
3. BO Metadata Manager
4. ADDA
These are just some of the best products. There are many products deveoped for specific scenarios like Address validation, Zip Codes, D&B data for organization details, VAT validation etc.
Instead of the tools, you can also use the SAP MDM enrichment architcture to connect to the webservices.
Rgds,
Ketan
Do reward poiints if reply was helpful

HT1338 i have about 88,000 songs in my music library, some are duplicates. Does anyone know of any Apple Product or 3rd party software that will identify and remove duplicates.

I have about 88,000 songs in my music library, some are duplicates. Does anyone know of any Apple Product or 3rd party software that will identify and remove duplicates.

Backup your music to an external source before doing this, just in case you delete the originals by accident.
iTunes will show you the duplicates. But I recommend tagging their comments or another field once selecting them to ensure you don't accidentally delete both the original and duplicate. You can always select all of them and change all their comment tags at once. Once you've done that, stop showing duplications, and then sort by the comment field. This will allow you to determine whether only the duplicates were shown in the show duplicates, or the originals. If you see any without comments, then you can go ahead and delete the duplicates.

Deleting 3rd Party Loops... where the freak are they stored???

Yes, I know that by default, loops are stored in Library/Application Support/Garageband/Apple Loops, or the similar address under my user library.
And, I know there is another folder close by, for Jam Packs.
However, I have been going INSANE, trying to find old, single-hit files and obsolete loops which i have downloaded from 3rd party sources. They are NOT in the regular places such as the Apple loops folder.
All of them were installed by drag and drop method into the Garageband loop browser, so one would assume they all went to the same place.
How in the world do i find these loops?
The Finder and Spotlight have turned up nothing.
I have about 5,000 i'd like to trash to make room for more important things.
Can Garageband be THIS cumbersome?

HangTime wrote:
yes, that was telling him to not delete it by hand because, as Christoph points out above, you then need to reindex, whereas deleting it through GB takes care of that.
with 5,000, it's probably worth the reindex, deleting one at a time through GB would be ... tiring.
Actually. i like your idea of deleting from the browser. They are scattered in different categories and different folders. I'd have to search and test them anyway... so I might as well just axe them when i come upon them in the browser.
I swear I've tried it that way before, to no avail..
Thanks a lot for you help.

Is there a 3rd Party Solution for Adobe's lack of recover for unsaved work?

Time and time again I am baffled by Adobe's inability or refusal to make the user experience consistent across it's entire Creative Suite.
I am repeatedly shocked by the punitive error messages I receive in Photoshop. It's as though you don't really care what the user wants, I mean what are we going to do, use MS Paint? So you are at liberty to provide such classic errors as "Unable to complete your request because of a program error" instead of "wait, did you mean apply that filter to the only visible layer that you had selected just seconds before and never requested that the layer be de-selected?" I could go on and on with the crazy and convoluted exceptions to logic in Photoshop, but I would rather just understand why, when you know that a problem exists and affects 90% of your users at some point, why wouldn't you try to build in some form of recovery when your program crashes
Why should I be punished for relying on your program not to crash when I am working on something? I have repeatedly been advised that the best solution is to save often. Sometimes that's not an option and why should it be my responsibility to compensate for your buggy program?
After 20 years of development, you can't figure out how to recover someone's work if they haven't been able to save for some reason and Phtooshop crashes? I have been using Photoshop since Version 3 (for sure, but more likely version 2) and back then you could rename your temp files and recover the work you hadn't saved. I understand that the mechanism by which fast previews (comps) of your work are displayed but not applied (like Live Image), but why isn't it possible to store a simple text file that could retrace my steps if your program crashes?
This is a real problem if you are processing a filter that takes 30 minutes and Photoshop waits until 29 minutes and 59 seconds to announce that it stopped working. Granted you can see your document in the background, but you can't save it? You can't commit whatever is in RAM for the undo states to disk? You can't have your program quickly save a new text file with the list of commands applied between saves? You can't do anything? After 20 years?
Microsoft includes recovery in Word, Excel, etc. Even SOME Adobe programs do it: InDesign...AfterEffects. Why doesn't your flagship program do it?
It's frustrating beyond belief and it baffles me that Adobe is celebrating the 20th anniversary of Photoshop and yet this basic, basic customer need is still not effectively addressed and furthermore, any question about it is answered with indignant indifference:
it doesn't work and we don't care what you want,
think you'd be happier with our competition....
oh wait, we don't really have any competition...
maybe you should save more often...
Is there a 3rd party solution that will allow me to recover my work in Photoshop when it crashes between saves? Or am I just stuck having to cope with rebuilding my work because Adobe refuses to provide a solution.
(let the backlash begin as I try to simulate my lens blur using MS Paint....not gonna happen)
Jase

Go to google and search for keyboard recording software. That will record all of your keystrokes.
CS4 running under windows 7 appearently has some problems. While it would be nice if Adobe went back and rewrote there software for an operating system that was in early development when CS4 was released, it is not likely to happen.
Excuse me, they did it is called Adobe Photoshop CS5 and is due to be release soon.
If, If you would stop ranting for a minute, and quit feeling like you are being slammed, and possibly listen for a minute.
I am currently running Windows Vista Home Premium "not my choice" on a Toshiba A215-S4747 with 3gb ram. When I bought this laptop the Toshiba Rep was at the Best Buy and I spoke with him about this very computer. I did not want to run Windows Vista, period, I had heard to many bad reports about it. The Toshiba Rep told me that was not a problem and this computer would run Windows XP Professional just fine.
So I bought this computer and 2gb of ram as it only came with 512mb. I went home happly and proceeded to install Windows XP Pro and the new memory. Guess what?
this computer will in fact run Windows XP Pro just fine as long as you take into consideration that there are almost no hardware drivers for the periferals that make up this computer.
So I reinstall Windows Vista and for the next year I am tied into fits because of system crashes. Finally I am at the point that I am going to take this computer to the Toshiba Office in Torrance California and personally give it back to them "I was going to throw it through the front office window.".
Just before I ran across memtest and I downloaded it and tested my memory. You got it I had a defective ram chip.
Best Buy replaced the chip no problem. that was in November of 2008. I do horrible things to this computer, I really can drive it. It has not crashed once since I found and fixed the problem.
No one is suggesting that you are an idiot! or inexperienced. but no matter what you do remember 2 very simple rules.
If you run into a problem 1. "Go Back To Basics" and 2. "KISS ie: keep it simple stupid" if you do this and I am speaking from my own experience you will find like and work a lot simpler and more pleasent.

Logic 9 Issue Triggering Wrong 3rd Party Samples

I know the question says 3rd party but bear with me because I have ruled out issues with the 3rd party libraries and players. This is my Issue:
So far no one from 8dio, Native Instruments, or Apple can fix this and I am completely out of ideas.
I recently picked up a 2010 8-core Mac Pro and have had this problem ever since. The issue is only with my 8dio Adagio strings (most of them), it will either play the wrong sample, or no sample at all. I don't get any error messages though. All my other Kontakt libraries work fine.
Example: Bass "Shorts" will play "feather stacc", "marcato", but not "stacc" or "pizz". Violas will produce sound however it plays the exact same sample which ever articulation I select, but it will only play for a second then cut out, no sustained notes. This sort of issue is true for pretty much all of the strings. I have ruled out many things including:
1. Its not the 8dio strings libraries or Kontakt because they work fine in standalone mode through Kontakt, its only when I try to open them through Logic that I get the issue.
2. I did a fresh install of Logic and Kontakt and still the same issue, however when I installed the exact same configuration on a friend's laptop, they worked fine through Logic.
3. The strings did work fine on my old iMac until I dragged over and opened a session from the new computer, now I get the same issue there. The only way I can get it to work on the iMac is to open an old session which already has Kontakt and strings loaded up, otherwise a new project or new instance of Kontakt results in the same issue. This points to a settings or preference issue with Logic, however a fresh install and/or deleting the "preferences" file should fix it right? Wrong.
4. I have tried 3 different operating systems (Mavricks, Mountain Lion, and Lion), 2 different main drives, a SSD and a regular drive. I've tried a fresh install of everything multiple times, different user accounts, redownloading Adagio, running the libraries from both internal and external HDs....
After ruling everything else out it still seems like a problem with Logic other than the fact that the fresh install works fine on my friend's laptop but not my new Mac Pro (both running Mountain Lion). Any ideas would be much appreciated cause I'm all out of them. Thank you.
Gabe
2010 Mac Pro 8-core 2.4ghz
OS X 10.8.5
Logic Pro 9.1.8
Kontakt 5.3
8dio Adagio
Apogee Duet Firewire Interface

If your Audio Unit Manager is not booting, re-install.
Treatment

Can I move an iTunes library from Comp1 to Comp2 through Home Sharing? What happens with the first sync? What happens to 3rd party app data (specifically, game scores/levels)?

I need to move an iTunes library from Computer 1 to Computer 2. Can I do this through Home Sharing, by dragging and dropping library items from one to the other? The library consists of iTunes purchases, home shared items and music/movies from our personal collection. Both computers have had all the accounts authorized, so I don't anticipate an issue there. I'd like to do this so that my son's ipod is impacted as little as possible -- specifically, his game scores/levels and other 3rd party data remain intact after the 1st sync and the organization of his icons remain intact.
Is there a way to do this smoothly and easily, protecting his ipod data/organization?

Sorry, I obviously wasn't clear. If you replicate the library from Computer 1 to Computer 2 by copying it, then all will be well. I routinely sync my iPhone and iPad both at home and at work using a single library that I migrate between the two locations via an external drive which is kept up do date using SyncToy.
Backup the iPod touch on Computer 1.
Copy the entire iTunes folder from Computer 1 to Computer 2, replacing any existing iTunes folder on Computer 2.
Check that content is accessible in the migrated library. (Won't be a problem for a standard iTunes library where all the content is inside the iTunes Media folder which in turn is inside your iTunes folder).
Connect iPod touch to Computer 2.
Sync.
In the unlikely event that something goes wrong (it won't) then you can connect the device back to Computer 1 to restore it.
Note device backups are not stored within the iTunes library and stay on the machine on which they were created. It is theorectically possible to migrate them but there isn't really any point. Once you have synced the iPod with the copy of the library on Computer 2 then Computer 2 will make its own backup of the device.
tt2

How can I set Firefox 8.0 to accept 3rd party cookies ONLY from selected sites but NOT from any other sites?

I do not like to accumulate 3rd party cookies and would simply not check the Accept 3rd Party Cookies box in Preferences. BUT in order to use my bank's web page I have to accept 3rd party cookies from a separate site that manages some of their transactions (like paying bills). This means I have to accept 3rd party cookies and then delete them by hand OR I have to check the accept box each time I use the bank's website and then uncheck it when I am done.

Thanks, but that is not what I was trying to do. I do not want to block cookies from a single site. I do not want to block all 3rd party cookies.
What I want to do is ACCEPT 3rd party cookies only from ONE site but NOT from any other site.

Duplication of 3rd party themes

Similar Messages

Maybe you are looking for