Duration in SM37

Hi,
where can i find the job execution time (duration) shown in SM37? I cant find it neither in TBTCP nor in TBTCO. Is it really calculated from start and end time?

Ok, its calculated by
FORM calculate_time_diff_in_sec
which can be found in function group btch.

Similar Messages

  • How to view ALL batch job details (SM37) at one glance ?

    Dear all,
    I am documenting all released batch job details, the information required includes the job name, client number, job frequency .. etc.
    In order to see that information, i go to SM37 and click on each job to see the details. I have about 60 jobs released, to get their details i have to click on them at least 60 times.
    Is there a report or table that i can refer to that provides me the information of all the jobs in one screen ?
    Thanks.
    Advice and comment will be appreciated.
    Regards,
    Kent

    Dear Prashanth,
    Thanks for the link, I managed to get the required information from table TBTCO or TBTCP with below selected fields.
    JOBNAME = Background job name
    SDLSTRTDT = Planned Start Date for Background Job
    SDLSTRTTM = Planned start time for background Job
    SDLUNAME = Initiator of job/step scheduling
    PRDMINS = Duration period (in minutes) for a batch job
    PRDHOURS = Duration period (in hours) for a batch job
    PRDDAYS = Duration (in days) of DBA action
    PRDWEEKS = Duration period (in weeks) for a batch job
    PRDMONTHS = Duration period (in months) for a batch job
    PERIODIC = Periodic jobs indicator ('X')
    STATUS = State of Background Job, S = Released, F = Finished
    AUTHCKMAN = Background client for authorization check
    EVENTID = Background Processing Event
    EVENTPARM = Background Event Parameters (Such as, Jobname/Jobcount)
    Dear Juan,
    Thanks for your reply.
    Regards,
    Kent

  • BI_PROCESS_INDEX is taking more than 6000 sec of duration....

    Hi Folks,
    Here is performance issue..
    In the process chain having the process variant BI_PROCESS_INDEX : which is creating the indexes for 3 cubes, like C01, C02 and C03.
    C01 and C02: Creating indexes for these cubes taking time not more than 1500 sec duration.
    C03 cube is taking nearlly 5000 sec duration...
    Can any one share your inputs, how we can reduce time for the creating indexes cube C03.
    Thanks,
    Ven

    Hi...
    Just check in SM37....whether any ODS activation or Roll up job is going on or not............if so..........Go to Job details...copy the PID no........sometimes ODS activation and Roll Jobs create locks for index Jobs.........we often face this issue........
    Then go to ST04............Lockwaits....Expand the nodes.search for that PID...........if u r able to find that PID there.it means those jobs r creating locks.........then Cancel those jobs..........index Job will complete very soon.........after that repeat those ODS activation and Roll up jobs.........
    Also Check the System Log in SM21...............and Shortdumps in ST22.........may be the overall system performance is poor..........due to this job is taking long time......
    Regards,
    Debjani........

  • Need clarification on one running job in SM37

    Dear  friends,
    right now am working for one client , so we are the second vendor for them and we have been taking care of the project
    now i can able to see my client's previous vendor user names are still availbae in SU01..
    so instead of deleting their user names i just wanted to see whether is there any scheduled jobs are there for that particular user id and then using SM37 transaction i found one job got scheduled and it is running daily... i.e.
    job                                job created              status                                    start date             start time       duration           delay
    STAUS-EMAIL             RAM                        FINISHED                              21.02.2011             00.00.39             1                    39
    PLEASE HELP ME FRIENDS ..WHAT DOES IT MEAN ? CAN I LOCK THAT PARTICULAR USER??? OR CAN I DELETE THIS JOB??
    CAN U PLEASE PRIOVIDE SOME INFORAMTION ....
    THANK U...
    REGARDS
    YUVA
    Edited by: ganandkumar on Feb 21, 2011 9:27 AM
    Edited by: ganandkumar on Feb 21, 2011 9:45 AM
    Edited by: ganandkumar on Feb 21, 2011 9:45 AM

    For this JOB, you can check what is the Program and Program variant it is executing...
    From the log you gave, it seems its a custom job scheduled on some program.
    Select the job, and click on steps.. it will take you to step list overview...
    then menu goto -> variant.
    this will tell you what program was running..
    based on the program you can decide if the SM37 job should be deleted or not..
    If you found that you still need the job, then you can just change the executing user of that JOB,,, replacing the older ID with any new ID

  • Tables related to SM37

    Hi All,
    I need the table name holding the field values of Duration and Delay viewed via SM37.
    I did check on the below tables, but no luck.
    TBTCO
    TBTCP
    TBTCS
    Thanks,
    Karthik

    Hi Karthik,
    Try using the function mudule BP_JOB_EDITOR
    You can also check - In se11 for table D010TAB enter the program name for SM37,ie SAPLBTCH,you'll get all the tables used for this transaction.
    But i think if you use this FM you'll get values in the export structure TBTCSTRT from which you'll have to caluculate.
    LASTSTRTTM - SDLSTRTTM (Latest Execution Time for Background Job - Planned start time for background Job)
    I hope it helps.
    Regards,
    Shraddha

  • Time duration taken for a job to complete

    Hi
    How do I konw what is the time duration that has taken for any job to be completed  I am looking  in RSMO and i am able to see the start time in the header tab for a job .how do i see the completed time??
    Thanks
    Sheetal

    Hi Sheetal,
    Double click on the start time a popup box would appear in that you can watch the End time as well.
    Also below the Start time you can watch Run time as well,ie the Total Time taken to complete the data load.
    or
    you can check in SM37,
    Copy the Reuqest name from monitor screen and paste it in the SM37 enter the name of the person who scheduled it or enter* to select all users.
    you can find the Job details of that particular request.
    Hope this helps.
    Regards,
    Ravikanth

  • Process chain time duration

    Hi Expert's
    I ran a process chain which is containing two infopackages.I need to make note of the time duration exactly taken to complete the process with this process chains .Can you people guide me  where can I see the time duration for this process chains.
    Thanx in Advance.
    Vassu.

    while u r viewing the log for the process chain..right click on the selected process..click on 'display messages'..
    it will show up 3 tabs..
    one of the tabs shows the sm37 job log..
    u can note the duration from there..b/w job started step and job completed step..
    Vishvesh

  • Background in SM37

    Hi all,
    I am trying to create a background job in a program using FMs JOB_OPEN,JOB_SUBMIT ....  and dont want the job to be executed immediately , but the user should go to SM37 and schedule the job for the job name created by the above program.
    How do i achieve this. PLs help with your ideas.
    Thanks,
    Stock

    stock sys,
      Scheduling Background Jobs:
    1.        Background jobs are scheduled by Basis administrators using transaction SM36.
    2.        To run a report in a background, a job needs to be created with a step using the report name
    and a variant for selection parameters. It is recommended to create a separate variant for each
    scheduled job to produce results for specific dates (e.g. previous month) or organizational units (e.g.
    company codes).
    3.        While defining the step, the spool parameters needs to be specified
    (Step-> Print Specifications->Properties) to secure the output of the report and help authorized users
    to find the spool request. The following parameters needs to be maintained:
    a.        Time of printing: set to “Send to SAP spooler Only for now”
    b.        Name – abbreviated name to identify the job output
    c.        Title – free form description for the report output
    d.        Authorization – a value defined by Security in user profiles to allow those users to access
    this spool request (authorization object  S_SPO_ACT, value SPOAUTH).  Only users with matching
    authorization value in their profiles will be able to see the output.
    e.        Department – set to appropriate department/functional area name. This field can be used in
    a search later.
    f.        Retention period – set to “Do not delete” if the report output needs to be retained for more
    than 8 days. Once the archiving/document repository solution is in place the spool requests could
    be automatically moved to the archive/repository. Storage Mode parameter on the same screen
    could be used to immediately send the output to archive instead of creating a spool request.
    Configuring user access:
    1.        To access a report output created by a background job, a user must have at
    least access to SP01 (Spool requests) transaction without restriction on the user
    name (however by itself it will not let the user to see all spool requests). To have
    that access the user must have S_ADMI_FCD authorization object in the profile with
    SPOR (or SP01) value of S_ADMI_FCD parameter (maintained by Security).
    2.        To access a particular job’s output in the spool, the user must have
    S_SPO_ACT object in the profile with SPOAUTH parameter matching the value used
    in the Print Specifications of the job (see p. 3.d above).
    3.        Levels of access to the spool (display, print once, reprint, download, etc) are
    controlled by SPOACTION parameter of S_SPO_ACT. The user must have at least
    BASE access (display).
    On-line reports:
    1.        Exactly the same configuration can be maintained for any output produced
    from R/3. If a user clicks “Parameters” button on a SAP Printer selection dialog, it
    allows to specify all the parameters as described in p. 3 of
    “Scheduling background jobs” section. Thus any output created by an online report
    can be saved and accessed by any user authorized to access that spool request
    (access restriction provided by the Authorization field of the spool request
    attributes, see p. 3.d of “Scheduling background jobs” section).
    Access to report’s output:
    1.        A user that had proper access (see Configuring user access above) can
    retrieve a job/report output through transaction SP01.
    2.        The selection screen can be configured by clicking “Further selection
    criteria…” button (e.g. to bring “Spool request name (suffix 2)” field or hide other
    fields).
    3.        The following fields can be used to search for a specific output (Note that
    Created By must be blank when searching for scheduled job’s outputs)
    a.        Spool request name (suffix 2) – corresponds to a spool name in p. 3.b in
    “Scheduling background jobs” section above).
    b.        Date created – to find an output of a job that ran within a certain date range.
    c.        Title – corresponds to spool Title in p. 3.c in “Scheduling background jobs”
    section above).
    d.        Department - corresponds to spool Department in p. 3.e in “Scheduling
    background jobs” section above).
    4.        Upon entering selection criteria, the user clicks the Execute button   to
    retrieve the list of matching spool requests.
    5.        From the spool list the user can use several function such as view the
    content of a spool request, print the spool request, view attributed of the spool
    request, etc. (some functions may need special authorization, see p.3 in
    Configuring user access)
    a.        Click the Print button   to print the spool request with the default attributes
    (usually defined with the job definition). It will print it on a printer that was
    specified when a job was created.
    b.        Click the “Print with changed attributed” button   to print the spool request
    with the different attributes (e.g. changing the printer name).
    c.        Click the “Display contents” button   to preview the spool request contents. A
    Print    and Download   functions are available from the preview mode.
    Don't forget to reward if useful

  • In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

    In oracle rac, If user query a select query and in processing data is fetched but in the duration of fetching the particular node is evicted then how failover to another node internally?

    The query is re-issued as a flashback query and the client process can continue to fetch from the cursor. This is described in the Net Services Administrators Guide, the section on Transparent Application Failover.

  • Message with IDOC number, created by LSMW, missing in job log in SM37

    Hi gurus,
    We have a temporary interface which uses LSMW to create IDOCs and update in SAP. It's used for materials, BOMs and document info records. In LSMW we have defined standard message types MATMAS_BAPI, BOMMAT and DOCUMENT_LOAD for the IDOCs. All these have the same problem.
    A background job runs and starts LSMW. In the job log in SM37 I want to see which IDOCs were created. For some reason this is different in my development system and my test system, and as far as I know all settings should be the same. In the test system LSMW creates more message lines in the job log, than it does in the dev system. Message number E0-097 is "IDOC XXXX added", and this is missing in the dev system.
    This is what it looks like in the dev system:
    Data transfer started for object 'MATMAS' (project 'X', subobject 'Y')             /SAPDMC/LSMW   501    I
    Import program executed successfully                                                             /SAPDMC/LSMW   509    I
    File 'XXX.lsmw.read' exists                                                                               /SAPDMC/LSMW   502    I
    Conversion program executed successfully                                                    /SAPDMC/LSMW   513    I
    Data transfer terminated for object 'MATMAS' (project 'X', subproject 'Y')       /SAPDMC/LSMW  516    I
    And this is what it looks like in the test system. More information, which is exactly what I want in dev system too:
    Data transfer started for object 'MATMAS' (project 'X', subobject 'Y')             /SAPDMC/LSMW   501    I
    Import program executed successfully                                                             /SAPDMC/LSMW  509    I
    File 'XXX.lsmw.read' exists                                                                               /SAPDMC/LSMW  502    I
    Conversion program executed successfully                                                    /SAPDMC/LSMW  513    I
    File 'XXX.lsmw.conv' exists                                                                              /SAPDMC/LSMW   502   I
    IDoc '0000000002489289' added                                                                      E0                         097   S
    File 'XXX.lsmw.conv' transferred for IDoc generation                                      /SAPDMC/LSMW   812   I
    Data transfer terminated for object 'MATMAS' (project 'X', subproject 'Y')      /SAPDMC/LSMW   516   I
    In both cases the IDOC is created and update works fine.
    My only issue is that I can't see the IDOC number in the dev system. I know I can get the IDOC number in WE02, but in this case we have program logic which reads the job log to be able to check IDOC status before sending OK message back to the other side of the interface.
    I hope any of you can have an idea how I can update somewhere to get message E0-097 with IDOC number into the log.
    Regards,
    Lisbeth

    Hi Arun,
    If you want to show your messages in the job log you have to use the MESSAGE statement. In case you use WRITE statements an output list be created which can be found in the spool (there is an icon to go to the spool directly).
    Regards,
    John.

  • Clip doesn't retain its proper duration

    Hi there,
    I have a 1 min. 6 sec Quicktime movie that I'm trying to import into Final Cut Pro. My problem is that whenever I try to import it, it doesn't retain the proper duration. It shortens itself to 1 min. and 3 or so seconds.
    I've tried restarting FCP and the problem remained. I double-checked the Quicktime movie, and its duration is still 1 min. and 6 sec. I tried deleting the movie's reference in the Browser and re-imported it, but it still only has a 1 min. and 3 or so second duration. I need the rest of that clip.
    What's even weirder is that when I make a freeze frame of some part of that clip (after it's been imported into the timeline), for some odd reason, the freeze frame references a later part of the clip (not where I chose to mkae a freeze frame).
    I don't know if this will help, but the movie is a credits sequence done in After Effects that I exported to a Quicktime movie using DV/DVCPRO NTSC settings at a very high quality.
    I appreciate all help.
    Thanks,
    Adam

    What's even weirder is that when I make a freeze frame of some part of that clip (after it's been imported into the timeline), for some odd reason, the freeze frame references a later part of the clip (not where I chose to mkae a freeze frame).I don't know if this will help, but the movie is a credits sequence done in After Effects that I exported to a Quicktime movie using DV/DVCPRO NTSC settings at a very high quality.
    "Very high quality" is not helpful. You should have used Animation codec at the same frame rate. Your freeze frame would be easier to build if you did it in AE but, since you're out of time, your credits would be faster to create in FCP using one of the Boris titlers.
    bogiesan

  • I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv.  I've been unable to locate an app that will do this.

    I want to make a slideshow to view on my television with image's duration ranging from seconds to an hour or more and I want to use my iPhone or iPad mini to control the television through my Apple tv.
    I've been unable to locate an app that will do this.  The Photos app that comes with the phone or iPad has extremely limited duration controls.  PhotoStream seems to load everything from my phone or iPad not allowing me to just load up a set group of images.
    iPhoto for iPad is getting some terrible recent reviews.  I tried a couple other free apps but they don't use Airplay.
    I can do something like this with iPhoto and my MB Air, but it's kind of ugly to have the computer open in order to connect by Airplay to my Apple TV.  I've thought the iPad or iPhone would be a lower profile controller.
    Am I out of luck?

    Thanks for your help.  Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV.  I guess I'm just stuck with using iPhoto on my MB Air.  Thanks again.
    paul

  • Editing text captions changes the Duration setting

    HI,
    I edited a text caption in the Text Caption dialog and closed
    it with the OK button. The duration (Text Caption dialog >
    Options tab > Timing > Display for:) changed although I
    didn't change it. Has anyone had this problem? I looked at the help
    file but didn't find any information.
    Thanks,
    MochaLM

    Hi Rick,
    I sent my reply, but it looks that it didin't get sent, so
    I'm writng this again. Thank you so much for your quick response!!
    I unchecked Calculate Caption Timing, and the problem is resolved.
    You're great! Thanks so much
    !

  • Unable to change Still/Freeze Frame Duration in User Pref Edit tab

    Process-selected new project, change Still/Freeze Frame Duration in user preferences on the edit tab.
    Need to change to 10 minutes. Typed in the field 00:10:00:00. When I hit ok, I get a beep and it defaults back to what was in there, 01:00:00:00. So tried a larger number 02:00:00:00. Same result. A beep.
    So went ahead with project and opened a sequence and tried to change it from the viewer. Same issue.
    Trashed prefs and started from scratch. Same issue.
    Ideas?

    Trashed prefs rebooted originally.
    Process as follows for trashing prefs. First time through I had opened a project. This time did not.
    Open Home Folder
    Open Library
    Open Preferences
    Delete com.apple.finalcutpro.plist
    Open Final Cut Pro User Data
    Delete Final Cut Pro 5.0 Prefs
    Delete Final Cut Obj Cache
    Delete Final Cut Prof Cache
    Run disk utility to repair permissions.
    Reboot.
    Did not open a project this time.
    Same issue but now I am able to put a slug in the time line and by selecting clip properties, can set the duration (was not able to do this before so some progress). Still can't set duration though as earlier described from edit tab on the user preferences page for still/freeze duration.

  • SharePoint 2010 Slow query duration when setting metadata on folder

    I'm getting "Slow Query Duration" when I programmatically set a default value for a default field to apply to documents at a specified location on a SP 2010 library.
    It has nothing to do with performance most probably as I'm getting this working with a folder within a library with only a 1 document on a UAT environment. Front-end: AMD Opteron 6174 2.20GHz x 2 + 8gb RAM, Back-end: AMD Opteron 6174 2.20GHz x 2 + 16gb
    RAM.
    The specific line of code causing this is:
    folderMetadata.SetFieldDefault(createdFolder, fieldData.Field.InternalName, thisFieldTextValue);
    What SP says:
    02/17/2014 16:29:03.24 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa42 Monitorable A large block of literal text was sent to sql. This can result in blocking in sql and excessive memory use on the front end. Verify that no binary parameters are
    being passed as literals, and consider breaking up batches into smaller components. If this request is for a SharePoint list or list item, you may be able to resolve this by reducing the number of fields.
    02/17/2014 16:29:03.24 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa43 High Slow Query Duration: 254.705556153086
    02/17/2014 16:29:03.26 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High Slow Query StackTrace-Managed: at Microsoft.SharePoint.Utilities.SqlSession.OnPostExecuteCommand(SqlCommand command, SqlQueryData monitoringData) at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
    command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock) at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock) at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean retryfordeadlock) at Microsoft.SharePoint.Library.SPRequestInternalClass.PutFile(String
    bstrUrl, String bstrWebRelativeUrl, Object punkFile, Int32 cbFile, Object punkFFM, PutFileOpt PutFileOpt, String bstrCreatedBy, String bstrModifiedBy, Int32 iCreatedByID, Int32 iModifiedByID, Object varTimeCreated, Object varTimeLastModified, Obje...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...ct varProperties, String bstrCheckinComment, Byte partitionToCheck, Int64 fragmentIdToCheck, String bstrCsvPartitionsToDelete, String bstrLockIdMatch, String bstEtagToMatch,
    Int32 lockType, String lockId, Int32 minutes, Int32 fRefreshLock, Int32 bValidateReqFields, Guid gNewDocId, UInt32& pdwVirusCheckStatus, String& pVirusCheckMessage, String& pEtagReturn, Byte& piLevel, Int32& pbIgnoredReqProps) at Microsoft.SharePoint.Library.SPRequest.PutFile(String
    bstrUrl, String bstrWebRelativeUrl, Object punkFile, Int32 cbFile, Object punkFFM, PutFileOpt PutFileOpt, String bstrCreatedBy, String bstrModifiedBy, Int32 iCreatedByID, Int32 iModifiedByID, Object varTimeCreated, Object varTimeLastModified, Object varProperties,
    String bstrCheckinComment, Byte partitionToCheck, Int64 fragmentIdToCheck...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ..., String bstrCsvPartitionsToDelete, String bstrLockIdMatch, String bstEtagToMatch, Int32 lockType, String lockId, Int32 minutes, Int32 fRefreshLock, Int32 bValidateReqFields,
    Guid gNewDocId, UInt32& pdwVirusCheckStatus, String& pVirusCheckMessage, String& pEtagReturn, Byte& piLevel, Int32& pbIgnoredReqProps) at Microsoft.SharePoint.SPFile.SaveBinaryStreamInternal(Stream file, String checkInComment, Boolean checkRequiredFields,
    Boolean autoCheckoutOnInvalidData, Boolean bIsMigrate, Boolean bIsPublish, Boolean bForceCreateVersion, String lockIdMatch, SPUser modifiedBy, DateTime timeLastModified, Object varProperties, SPFileFragmentPartition partitionToCheck, SPFileFragmentId fragmentIdToCheck,
    SPFileFragmentPartition[] partitionsToDelete, Stream formatMetadata, String etagToMatch, Boolea...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...n bSyncUpdate, SPLockType lockType, String lockId, TimeSpan lockTimeout, Boolean refreshLock, Boolean requireWebFilePermissions, Boolean failIfRequiredCheckout, Boolean
    validateReqFields, Guid newDocId, SPVirusCheckStatus& virusCheckStatus, String& virusCheckMessage, String& etagReturn, Boolean& ignoredRequiredProps) at Microsoft.SharePoint.SPFile.SaveBinary(Stream file, Boolean checkRequiredFields, Boolean
    createVersion, String etagMatch, String lockIdMatch, Stream fileFormatMetaInfo, Boolean requireWebFilePermissions, String& etagNew) at Microsoft.SharePoint.SPFile.SaveBinary(Byte[] file) at Microsoft.Office.DocumentManagement.MetadataDefaults.Update()
    at TWINSWCFAPI.LibraryManager.CreatePathFromFolderCollection(String fullPathUrl, SPListItem item, SPWeb web, Dictionary2...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ... folderToCreate, Boolean setDefaultValues, Boolean mainFolder) at TWINSWCFAPI.LibraryManager.CreatePathFromFolderCollection(String fullPathUrl, List1 resultDataList,
    SPListItem item, SPWeb web, Boolean setDefaultValues, Boolean mainFolder) at TWINSWCFAPI.LibraryManager.CreateExtraFolders(List1
    pathResultDataList, List1 resultDataList, String fullPathUrl, SPWeb web, SPListItem item, Boolean setDefaultValues) at TWINSWCFAPI.LibraryManager.CreateFolders(SPWeb web, List1
    pathResultDataList, SPListItem item, String path, Boolean setDefaultValues) at TWINSWCFAPI.LibraryManager.MoveFileAfterMetaChange(SPListItem item) at TWINSWCFAPI.DocMetadataChangeEventReceiver.DocMetadataChangeEventReceiver.FileDocument(SPWeb web, SPListItem
    listItem) at TWINSWCFAPI.DocMetadataChang...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...eEventReceiver.DocMetadataChangeEventReceiver.ItemCheckedIn(SPItemEventProperties properties) at Microsoft.SharePoint.SPEventManager.RunItemEventReceiver(SPItemEventReceiver
    receiver, SPUserCodeInfo userCodeInfo, SPItemEventProperties properties, SPEventContext context, String receiverData) at Microsoft.SharePoint.SPEventManager.RunItemEventReceiverHelper(Object receiver, SPUserCodeInfo userCodeInfo, Object properties, SPEventContext
    context, String receiverData) at Microsoft.SharePoint.SPEventManager.<>c__DisplayClassc1.b__6() at Microsoft.SharePoint.SPSecurity.RunAsUser(SPUserToken userToken, Boolean bResetContext, WaitCallback code, Object param) at Microsoft.SharePoint.SPEventManager.InvokeEventReceivers[ReceiverType](SPUserToken
    userToken, Gu...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...id tranLockerId, RunEventReceiver runEventReceiver, Object receivers, Object properties, Boolean checkCancel) at Microsoft.SharePoint.SPEventManager.InvokeEventReceivers[ReceiverType](Byte[]
    userTokenBytes, Guid tranLockerId, RunEventReceiver runEventReceiver, Object receivers, Object properties, Boolean checkCancel) at Microsoft.SharePoint.SPEventManager.HandleEventCallback[ReceiverType,PropertiesType](Object callbackData) at Microsoft.SharePoint.Utilities.SPThreadPool.WaitCallbackWrapper(Object
    state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext
    execu...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database fa44 High ...tionContext, ContextCallback callback, Object state) at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
    at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
    02/17/2014 16:29:03.26 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzku High ConnectionString: 'Data Source=PFC-SQLUAT-202;Initial Catalog=TWINSDMS_LondonDivision_Content;Integrated Security=True;Enlist=False;Asynchronous Processing=False;Connect
    Timeout=15' ConnectionState: Open ConnectionTimeout: 15
    02/17/2014 16:29:03.26 w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High SqlCommand: 'DECLARE @@iRet int;BEGIN TRAN EXEC @@iRet = proc_WriteChunkToAllDocStreams @wssp0, @wssp1, @wssp2, @wssp3, @wssp4, @wssp5, @wssp6;IF @@iRet <> 0 GOTO
    done; DECLARE @@S uniqueidentifier; DECLARE @@W uniqueidentifier; DECLARE @@DocId uniqueidentifier; DECLARE @@DoclibRowId int; DECLARE @@Level tinyint; DECLARE @@DocUIVersion int;DECLARE @@IsCurrentVersion bit; DECLARE @DN nvarchar(256); DECLARE @LN nvarchar(128);
    DECLARE @FU nvarchar(260); SET @DN=@wssp7;SET @@iRet=0; ;SET @LN=@wssp8;SET @FU=@wssp9;SET @@S=@wssp10;SET @@W=@wssp11;SET @@DocUIVersion = 512;IF @@iRet <> 0 GOTO done; ;SET @@Level =@wssp12; EXEC @@iRet = proc_UpdateDocument @@S, @@W, @DN, @LN, @wssp13,
    @wssp14, @wssp15, @wssp16, @wssp17, @wssp18, @wssp19, @wssp20, @wssp21, @wssp22, @wssp23, @wssp24, @wssp25, @wssp26,...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High ... @wssp27, @wssp28, @wssp29, @wssp30, @wssp31, @wssp32, @wssp33, @wssp34, @wssp35, @wssp36, @wssp37, @wssp38, @wssp39, @wssp40, @wssp41, @wssp42, @wssp43, @wssp44, @wssp45,
    @wssp46, @wssp47, @wssp48, @wssp49, @wssp50, @wssp51, @@DocId OUTPUT, @@Level OUTPUT , @@DoclibRowId OUTPUT,@wssp52 OUTPUT,@wssp53 OUTPUT,@wssp54 OUTPUT,@wssp55 OUTPUT ; IF @@iRet <> 0 GOTO done; EXEC @@iRet = proc_TransferStream @@S, @@DocId, @@Level,
    @wssp56, @wssp57, @wssp58; IF @@iRet <> 0 GOTO done; EXEC proc_AL @@S,@DN,@LN,@@Level,0,N'London/Broking/Documents/E/E _ E Foods Corporation',N'2012',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,1,N'London/Broking/Documents/E',N'E _ E Foods Corporation',72,85,83,1,N'';EXEC
    proc_AL @@S,@DN,@LN,@@Level,2,N'London/Broking/Documents/E/E _ E Foods Corporation',N'2013',72,85,...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High ...83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,3,N'London/Broking/Documents/E/E _ E Foods Corporation/2013',N'QA11G029601',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,4,N'London/Broking/Documents/K',N'Konig
    _ Reeker',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,5,N'London/Broking/Documents/K/Konig _ Reeker',N'2012',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,6,N'London/Broking/Documents/K/Konig _ Reeker/2012',N'QA12E013201',72,85,83,1,N'';EXEC proc_AL
    @@S,@DN,@LN,@@Level,7,N'London/Broking/Documents/K/Konig _ Reeker/2012',N'A12EL00790',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,8,N'London/Broking/Documents/K/Konig _ Reeker/2012',N'A12DA00720',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,9,N'London/Broking/Documents/K/Konig
    _ Reeker/2012',N'A12DC00800',72,85,83,1,N'';EXEC proc...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High ..._AL @@S,@DN,@LN,@@Level,10,N'London/Broking/Documents/A',N'Ace European Group Limited',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,11,N'London/Broking/Documents/A/Ace
    European Group Limited',N'2012',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,12,N'London/Broking/Documents/A/Ace European Group Limited/2012',N'JXB88435',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,13,N'London/Broking/Documents/A/Ace European Group
    Limited/2012/JXB88435/Closings',N'PRM 1',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,14,N'London/Broking/Documents/A/Ace European Group Limited/2012/JXB88435/Closings',N'PRM 2',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,15,N'London/Broking/Documents/C',N'C
    Moore-Gordon',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,16,N'London/Broking/Documents/C/C Moore-Gordo...
    02/17/2014 16:29:03.26* w3wp.exe (0x10D0) 0x0DB0 SharePoint Foundation Database tzkv High ...n',N'2012',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,17,N'London/Broking/Documents/C/C Moore-Gordon/2012',N'QY13P700201',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,18,N'London/Broking/Documents/C/C
    Moore-Gordon',N'2013',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,19,N'London/Broking/Documents/C/C Moore-Gordon/2013',N'Y13PF07010',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,20,N'London/Broking/Documents/A/Ace European Group Limited/2012/JXB88435/Closings',N'ARP
    7',72,85,83,1,N'';EXEC proc_AL @@S,@DN,@LN,@@Level,21,N'London/Broking/Documents/A/Ace European Group Limited/2012/JXB88435/Closings',N'ARP 8',72,85,83,1,N'';EXEC proc_AL . . .
    Thanks in advance A

    SharePoint and SQL Server installed on same server or how is the setup?
    i would start to enable the developer dashboard, analyze the report of the developer dashboard...
    you will see if any webpart, or page or sql server query taking too much time.
    http://www.sharepoint-journey.com/developer-dashboard-in-sharepoint-2013.html
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Maybe you are looking for