Duration of RMAN Backup
Hi,
I am using Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit on Solaris SPARC.
I weekly take level 0 backup on sunday, and then incremental level 1 backup each day in the week and archive log backups daily every after 3 hours.
I want to know that how much time my level 0 backup on last sunday (i.e. 17april) took, how much incremental level 1 on 19april took, and how much time archivelog took during the date 20 april.
I dont have log files of those RMAN backups so unable to get that info from the log files. I would appreciate if you share any query.
would you please guide in that regard?
regards
select
sid,
start_time,
totalwork
sofar,
(sofar/totalwork) * 100 pct_done
from
v$session_longops
where
totalwork > sofar
AND
opname NOT LIKE '%aggregate%'
AND
opname like 'RMAN%';
select
sid,
spid,
client_info,
event,
seconds_in_wait,
p1, p2, p3
from
v$process p,
v$session s
where
p.addr = s.paddr
and
client_info like 'rman channel=%';
Yousef Rifai has published this RMAN monitoring script, quite handy when you need to monitor the status of a long running RMAN backup job:
REM RMAN Progress
alter session set nls_date_format='dd/mm/yy hh24:mi:ss'
select SID, START_TIME,TOTALWORK, sofar, (sofar/totalwork) * 100 done,
sysdate + TIME_REMAINING/3600/24 end_at
from v$session_longops
where totalwork > sofar
AND opname NOT LIKE '%aggregate%'
AND opname like 'RMAN%'
REM RMAN wiats
set lines 120
column sid format 9999
column spid format 99999
column client_info format a25
column event format a30
column secs format 9999
SELECT SID, SPID, CLIENT_INFO, event, seconds_in_wait secs, p1, p2, p3
FROM V$PROCESS p, V$SESSION s
WHERE p.ADDR = s.PADDR
and CLIENT_INFO like 'rman channel=%'
/reference and source:-
http://www.dba-oracle.com/t_monitor_rman_script.htm
Similar Messages
-
Is there a default DURATION in RMAN?
We're running: Recovery Manager: Release 11.2.0.1.0
In one of our lower environments we had an archivelog backup that had been running for just over 24 days (no one noticed), and it suddenly ended during the night with the following error message:
<BEGINNING_OF_ERROR_MESSAGE_IN_RMAN_OUTPUT_LOG>
channel c001: starting piece 4 at 25-MAY-12
user interrupt received
Finished backup at 25-MAY-12
user interrupt received
user interrupt received
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03099: job cancelled at user request
user interrupt received
ORACLE error from recovery catalog database: ORA-12152: TNS:unable to send break message
RMAN>
Recovery Manager complete.
<END_OF_ERROR_MESSAGE>
Neither of the DBAs had logged in and cancelled the job, either via a "kill" command or anything else. Other archivelog backups have been running to completion in the interim, without issue, even while this one was "hung".
So, the question is, what generated the "user interrupt"?
I've looked at all of our daily scripts, and do not see anything that might perform any "cleanup" of long-running processes.
I know you can specify a DURATION window, for your backup to run in, which, if exceeded, RMAN will gracefully "self-destruct". I'm wondering if there is some default value of say, 24 days-or-so, that may have kicked in to cause this.
Anyone have any thoughts/ideas on what may have happened?
Thanks.No, I don't believe so.
Sometimes the environment variables NLS_DATE_FORMAT and NLS_LANG being set wrong can cause this.
There's an Oracle note on this :
RMAN Backup Fails With RMAN-03009 ORA-01858 ORA-01861 [ID 744047.1]
Best Regards
mseberg -
RMAN backup to SAN takes 13 hours
Hi All,
I have configured my RMAN to run through Recovery Catalog, and take daily full backup (limitation of Standard Edition) to a shared location on Test Server (\\testdb), which takes around 35 minutes to complete successfully.
The same full database backup takes 13 hours to complete on shared location to SAN storage mounted on blade server (\\blade5). To investigate further I opened an SR with Oracle Support and ran a series of test to take backup of a single tablespace (using target controlfile) on following 3 locations:
1. Local Hard disk of Production Server
2. Shared location on Test Server
3. Shared location to SAN storage mounted on blade server
Following were the results of the test:
1. The backup tablespace size is 1.36 GB with one datafile.
2. The backup piece size in all 3 test cases is 1.1 GB each.
3. RMAN Backup Time at 3 location:
3a. Local Backup Duration (D:\backup): 04:55 minutes
3b. Shared Backup Duration (\\testdbl): 02:25 minutes
3c. Shared SAN Duration (\\blade5): 26:25 minutes
Based on the above finding Oracle Support concluded that Oracle RMAN is perfectly fine and It is at the SAN that the problem resides, whereas the IT Admins state the problem is at the RMAN side.
My query is, how do we determine that Oracle RMAN is underperforming due to issues with SAN or blade server or network?
Regard,
Z.K.ebrian wrote:
When the backup is running to the SAN, you may want to see what RMAN may be waiting for from V$SESSION/V$SESSION_WAIT. In addition, you may want to enable tracing during the backup to the SAN and see if anything stands out from the trace file:
rman target / log rman.log trace rman.trc debug
As per your suggestion, I carried out the test again with tracing enabled.
1 Tablespace [with 1 datafile] size 1.36 GB used for RMAN backup.
Backup piece size: 1.1 GB
Please find below output of V$SESSION/V$SESSION_WAIT for all 3 cases:
*1. LOCAL DISK*
--v$session
SADDR SID SERIAL# AUDSID PADDR USER# USERNAME COMMAND OWNERID TADDR LOCKWAIT STATUS SERVER SCHEMA# SCHEMANAME OSUSER PROCESS MACHINE TERMINAL PROGRAM TYPE SQL_ADDRESS SQL_HASH_VALUE PREV_SQL_ADDR PREV_HASH_VALUE MODULE MODULE_HASH ACTION ACTION_HASH CLIENT_INFO FIXED_TABLE_SEQUENCE ROW_WAIT_OBJ# ROW_WAIT_FILE# ROW_WAIT_BLOCK# ROW_WAIT_ROW# LOGON_TIME LAST_CALL_ET PDML_ENABLED FAILOVER_TYPE FAILOVER_METHOD FAILED_OVER RESOURCE_CONSUMER_GROUP PDML_STATUS PDDL_STATUS PQ_STATUS CURRENT_QUEUE_DURATION CLIENT_IDENTIFIER
5428E7D8 30 14290 0 5425FD54 0 SYS 0 2147483644 INACTIVE DEDICATED 0 SYS ISCO\zafferk 6200:5792 ISCO\DBSERVER DBSERVER RMAN.EXE USER 00 0 0D779F90 888448358 RMAN.EXE 0 0000001 FINISHED 2940145100 2466540 -1 0 0 0 3/9/2009 10:31:32 AM 6 NO NONE NONE NO SYS_GROUP DISABLED ENABLED ENABLED 0
542B01C8 87 3021 0 54263FBC 0 SYS 0 2147483644 INACTIVE DEDICATED 0 SYS ISCO\zafferk 6200:5792 ISCO\DBSERVER DBSERVER RMAN.EXE USER 00 0 0AA8F068 1819975476 RMAN.EXE 0 0 2466515 -1 0 0 0 3/9/2009 10:31:51 AM 12 NO NONE NONE NO SYS_GROUP DISABLED ENABLED ENABLED 0
542C84B8 128 3620 0 542643A4 0 SYS 0 2147483644 INACTIVE DEDICATED 0 SYS ISCO\zafferk 6200:5792 ISCO\DBSERVER DBSERVER RMAN.EXE USER 05B36878 1141676395 05B36878 1141676395 backup full datafile: ORA_DISK_1 3173805813 0000014 FINISHED 4058944949 rman channel=ORA_DISK_1 2466514 -1 0 0 0 3/9/2009 10:32:13 AM 12 NO NONE NONE NO SYS_GROUP DISABLED ENABLED ENABLED 0
--v$session_wait
SID SEQ# EVENT P1TEXT P1 P1RAW P2TEXT P2 P2RAW P3TEXT P3 P3RAW WAIT_TIME SECONDS_IN_WAIT STATE
128 751 async disk IO count 1 00000001 intr 32 00000020 timeout 2147483647 7FFFFFFF -1 0 WAITED KNOWN TIME
30 655 SQL*Net message from client driver id 1111838976 42455100 #bytes 1 00000001 0 00 0 264 WAITING
87 135 SQL*Net message from client driver id 1111838976 42455100 #bytes 1 00000001 0 00 0 9 WAITING*2. TESTDB*
--v$session
SADDR SID SERIAL# AUDSID PADDR USER# USERNAME COMMAND OWNERID TADDR LOCKWAIT STATUS SERVER SCHEMA# SCHEMANAME OSUSER PROCESS MACHINE TERMINAL PROGRAM TYPE SQL_ADDRESS SQL_HASH_VALUE PREV_SQL_ADDR PREV_HASH_VALUE MODULE MODULE_HASH ACTION ACTION_HASH CLIENT_INFO FIXED_TABLE_SEQUENCE ROW_WAIT_OBJ# ROW_WAIT_FILE# ROW_WAIT_BLOCK# ROW_WAIT_ROW# LOGON_TIME LAST_CALL_ET PDML_ENABLED FAILOVER_TYPE FAILOVER_METHOD FAILED_OVER RESOURCE_CONSUMER_GROUP PDML_STATUS PDDL_STATUS PQ_STATUS CURRENT_QUEUE_DURATION CLIENT_IDENTIFIER
54290D98 34 11745 0 542643A4 0 SYS 0 2147483644 ACTIVE DEDICATED 0 SYS ISCO\zafferk 5156:5620 ISCO\DBSERVER DBSERVER RMAN.EXE USER 05B36878 1141676395 00 0 backup full datafile: ORA_DISK_1 3173805813 0000012 STARTED 2679454996 rman channel=ORA_DISK_1 2467508 -1 0 0 0 3/9/2009 10:50:26 AM 12 NO NONE NONE NO SYS_GROUP DISABLED ENABLED ENABLED 0
54294FA8 41 13232 0 54263FBC 0 SYS 0 2147483644 INACTIVE DEDICATED 0 SYS ISCO\zafferk 5156:5620 ISCO\DBSERVER DBSERVER RMAN.EXE USER 00 0 0AA8F068 1819975476 RMAN.EXE 0 0 2467521 -1 0 0 0 3/9/2009 10:50:03 AM 3 NO NONE NONE NO SYS_GROUP DISABLED ENABLED ENABLED 0
5429D3C8 55 4581 0 5425FD54 0 SYS 0 2147483644 INACTIVE DEDICATED 0 SYS ISCO\zafferk 5156:5620 ISCO\DBSERVER DBSERVER RMAN.EXE USER 00 0 58565384 2746682842 RMAN.EXE 0 0000001 FINISHED 2940145100 2467505 -1 0 0 0 3/9/2009 10:48:48 AM 15 NO NONE NONE NO SYS_GROUP DISABLED ENABLED ENABLED 0
--v$session_wait
SID SEQ# EVENT P1TEXT P1 P1RAW P2TEXT P2 P2RAW P3TEXT P3 P3RAW WAIT_TIME SECONDS_IN_WAIT STATE
34 788 async disk IO count 1 00000001 intr 32 00000020 timeout 2147483647 7FFFFFFF -1 0 WAITED KNOWN TIME
41 95 SQL*Net message from client driver id 1111838976 42455100 #bytes 1 00000001 0 00 0 3 WAITING
55 655 SQL*Net message from client driver id 1111838976 42455100 #bytes 1 00000001 0 00 0 132 WAITING*3. SAN blade5*
--v$session
SADDR SID SERIAL# AUDSID PADDR USER# USERNAME COMMAND OWNERID TADDR LOCKWAIT STATUS SERVER SCHEMA# SCHEMANAME OSUSER PROCESS MACHINE TERMINAL PROGRAM TYPE SQL_ADDRESS SQL_HASH_VALUE PREV_SQL_ADDR PREV_HASH_VALUE MODULE MODULE_HASH ACTION ACTION_HASH CLIENT_INFO FIXED_TABLE_SEQUENCE ROW_WAIT_OBJ# ROW_WAIT_FILE# ROW_WAIT_BLOCK# ROW_WAIT_ROW# LOGON_TIME LAST_CALL_ET PDML_ENABLED FAILOVER_TYPE FAILOVER_METHOD FAILED_OVER RESOURCE_CONSUMER_GROUP PDML_STATUS PDDL_STATUS PQ_STATUS CURRENT_QUEUE_DURATION CLIENT_IDENTIFIER
54294FA8 41 13257 0 5425FD54 0 SYS 0 2147483644 INACTIVE DEDICATED 0 SYS ISCO\zafferk 5804:5620 ISCO\DBSERVER DBSERVER RMAN.EXE USER 00 0 58565384 2746682842 RMAN.EXE 0 0000001 FINISHED 2940145100 2468381 -1 0 0 0 3/9/2009 10:55:08 AM 169 NO NONE NONE NO SYS_GROUP DISABLED ENABLED ENABLED 0
5429D3C8 55 4725 0 542643A4 0 SYS 0 2147483644 ACTIVE DEDICATED 0 SYS ISCO\zafferk 5804:5620 ISCO\DBSERVER DBSERVER RMAN.EXE USER 05B36878 1141676395 00 0 backup full datafile: ORA_DISK_1 3173805813 0000012 STARTED 2679454996 rman channel=ORA_DISK_1 2468384 -1 0 0 0 3/9/2009 10:56:16 AM 166 NO NONE NONE NO SYS_GROUP DISABLED ENABLED ENABLED 0
542C2FC8 119 14058 0 54263FBC 0 SYS 0 2147483644 INACTIVE DEDICATED 0 SYS ISCO\zafferk 5804:5620 ISCO\DBSERVER DBSERVER RMAN.EXE USER 00 0 0AA8F068 1819975476 RMAN.EXE 0 0 2468834 -1 0 0 0 3/9/2009 10:55:52 AM 8 NO NONE NONE NO SYS_GROUP DISABLED ENABLED ENABLED 0
--v$session_wait
SID SEQ# EVENT P1TEXT P1 P1RAW P2TEXT P2 P2RAW P3TEXT P3 P3RAW WAIT_TIME SECONDS_IN_WAIT STATE
55 833 async disk IO count 0 00 intr 32 00000020 timeout 2147483647 7FFFFFFF -1 4 WAITED KNOWN TIME
41 656 SQL*Net message from client driver id 1111838976 42455100 #bytes 1 00000001 0 00 0 1354 WAITING
119 495 SQL*Net message from client driver id 1111838976 42455100 #bytes 1 00000001 0 00 0 10 WAITINGIf you'd like, I can post trace file output of backup to \\blade5.
Regards,
Z.K. -
How can i do a RMAN backup of my database from the network ?
i'm using oracle 8i.1.7.3 with win server 2003
i want to know how can i do a RMAN backup of my database (sever machine A) from the network.
i'd like to save the backup in another machine (the same LAN, the same OS ).
to do that i've mapped a logical device in my comptur (z):
when i run rman command i got this error:
channel ORA_DISK_1: starting piece 1 at .......
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command ON ORA_DISK_1 channel at .......
00
ORA-19504: failed TO CREATE file "\\remote\save\"
ORA-27040: skgfrcre: create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 123) The filename, directory name, or volume label syntax is inco
rrect.Hi,
ORA-19504: failed TO CREATE file "\\remote\save\"make sure you have created this directory and change it's ownership (chown command)to oracle.
also make sure that oracle user has permission to write to this direcotry (chmod command)
hope this helps
cheers, walrus -
Can not recover table from rman backup
For testing I want to recover deleted table from rman backup.
I have make vm of oracle 11g. the following step i have applied but could not recover the table.
rman> backup database ;
On sqlplus create login as scott/tiger
create table scott.emp1(col1 varchar2(10));
insert into emp1(col1) value('Yasir ') ;
commit ;
select * from emp1 ;
it shows me one row successfully.
Now i have login the sys as sysdba
sqlplus> alter system switch logfile ;
after this i have drop the table .
Now to recover the table i have restored database on same vm.
rman>restore database ;
rman> recover database ;
rman> alter database open ;
on sqlplus i have issued
sqlplus> select * from scott.emp1 ;
table or view does not exist.
any help how to recover the deleted table from rman backupHi,
Check this test case
SQL> create table TEST2 as select * from emp;
Table created.
SQL> select count(*) from TEST2;
COUNT(*)
15
SQL> select TO_CHAR(SYSDATE,'DD-MON-YYYY HH24:MI:SS') from dual;
TO_CHAR(SYSDATE,'DD-
10-SEP-2013 10:57:05
SQL> alter system switch logfile;
System altered.
SQL> drop table TEST2 purge;
Table dropped.
SQL> shu immediate
[oracle@vnode MYSHELL]$ rman target /
Recovery Manager: Release 11.2.0.2.0 - Production on Tue Sep 10 10:58:39 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DDTEST (DBID=1667776968, not open)
RMAN> run{
set until time "to_date('2013 Sep 10 10:57','yyyy mon dd hh24:mi')";
restore database;
recover database;
alter database open resetlogs;
}2> 3> 4> 5> 6>
media recovery complete, elapsed time: 00:00:02
Finished recover at 10-SEP-13
database opened
RMAN> exit
SQL> set lin 200 pages 100
SQL> select count(*) from test2;
COUNT(*)
15
HTH -
Unable to restore and recover my Database from RMAN Backup
Dear All,
Iam practicing RMAN in Windows environment.
My configurations are
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION ON; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP ON; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO 'F:\Backup\%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO 'E:\ORACLE\DATABASE\SNCFORCL.ORA';
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 'F:\Backup\%U.bak';
Then i took the RMAN backup, now iam shutdown my DB and removed one logfile..
then i tried to startup the DB but it is saying
ORA-00313: open failed for members of log group 3 of thread 1
ORA-00312: online log 3 thread 1: 'E:\ORADATA\ORCL\REDO03.LOG'
So i tried to restore the Database with my rman backup
RMAN> restore database;
But i am unable to restore my logfile in the Datafiles location where as all other datafiles are restored but redo logfiles are not restored.
So, i am unable to recover my DB
Please tell me whether i am doing any mistake, what is the solution for my problem.
Thanks in advance
MahiAll you restored was your datafiles.
Now issue recover database and that will apply the archive logs.
This is in the oracle documentation.
"You must restore backups of these archived logs for recovery to proceed. You can restore either to the default or nondefault location. If you do not have backups, then you must performing incomplete recovery up to an SCN before the first missing redo log and open RESETLOGS."
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28270/osrecvry.htm
In this case after issuing restore database in RMAN, then issue this.
"Recover database"
It will then be an incomplete recovery. They should have been multiplexed. Did you restore your controlfile with this backup? You may have to issue an "Alter database open resetlogs;" -
Create a new Database in an other server using a copie of RMAN backup
Hi all,
I want to create an other instance for our production database. We have disk and tape in rman backup. My question is can i create a new database using our disk backup in an other server?
If some procedure or steps is there, email it to my adresse [email protected]
Hamid.
ThanksBy means of the use of Recovery Manager it is possible to duplicate a database out from a previously taken rman backup. The method will be outlined in the next few lines.
Let's assume a source database named SRCDB and the target database, named GEMINI. A unix like environment is assumed, but it can be implemented on windows as well, just beware of the particular Oracle implementation on a windows platform (orapwd file name, service creation, path format)
1. Create a password file for the Cloned (GEMINI) instance:
orapwd file=/u01/app/oracle/product/9.2.0.1.0/dbs/orapwGEMINI password=password entries=10
2. Configure tnsnames.ora and listner.ora
Properly identify the database at the tnsnames.ora and have the instance manually registered against the listener.ora files, both files located at the $ORACLE_HOME/network/admin directory.
2.a Manually register the database against the listener (listener.ora)
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/9.2.0.1.0)
(SID_NAME = GEMINI)
2.b Added the target GEMINI to the tnsnames.ora
GEMINI =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myhost.mydomain.com)(PORT = 1521))
(CONNECT_DATA =
(ORACLE_SID = GEMINI)
2.c Reload the listener
lsnrctl reload
3. Create a new init.ora for the cloned database.
Next create an init.ora file for the cloned database. In case the same paths cannot be used on the target host, either because it is the same source host or because those paths are not reproducible on the target, then DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT may be required to be defined
DB_NAME=GEMINI
CONTROL_FILES=(/u02/oradata/GEMINI/control01.ctl,
/u02/oradata/GEMINI/control02.ctl,
/u02/oradata/GEMINI/control03.ctl)
# Convert file names to allow for different directory structure.
DB_FILE_NAME_CONVERT=(/u02/oradata/SRCDB/,/u02/oradata/GEMINI/)
LOG_FILE_NAME_CONVERT=(/u01/oradata/SRCDB/,/u01/oradata/GEMINI/)
# block_size and compatible parameters must match those of the source database
DB_BLOCK_SIZE=8192
COMPATIBLE=9.2.0.0.0
4. Connect to the cloned instance
ORACLE_SID=GEMINI; export ORACLE_SID
sqlplus /nolog
conn / as sysdba
5. Create an SPFILE based on the init.ora
CREATE SPFILE FROM PFILE='/u01/app/oracle/admin/GEMINI/pfile/init.ora';
6. Start the database in NOMOUNT mode:
STARTUP FORCE NOMOUNT;
7. Connect to the TARGET, CATALOG and AUXILIARY databases.
By means of the rman three connections are open, one for the Source Database (SOURCEDB), another for the Catalog database (RCAT), and one more for the cloned database (GEMINI)
ORACLE_SID=GEMINI; export ORACLE_SID
rman TARGET sys/password@SRCDB CATALOG rman/rman@RCAT AUXILIARY /
8. Complete or Incomplete clone (recover)
From the rman the database using one of the following commands:
8.a Clone the database by means of a complete recover.
DUPLICATE TARGET DATABASE TO GEMINI;
8.b Clone the database up to a defined point in time in the past by means of an incomplete recover
DUPLICATE TARGET DATABASE TO GEMINI UNTIL TIME 'SYSDATE-2';
9. Process finished.
Once the process is finished, the newly created GEMINI database is ready to be used as an independent new cloned database.
Ref. RMAN Clone a Database
~ Madrid -
I am getting below error while taking RMAN backup.
Friends,
I am getting below error while taking RMAN backup.
The issue is related with a lock while trying to backup the controlfile.
The lock is more likely caused by the autobackup controlfile process started just before RMAN process was also trying the backup controlfile as shown in the following alert.log excerpt.
Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
ORA-00230: operation disallowed: snapshot control file enqueue unavailable
Is there anyway to solve this issue?Thanks in advance.Hi,
SQL> SELECT s.sid, username AS "User", program, module, action, logon_time "Logon", l.*
FROM v$session s, v$enqueue_lock l
WHERE l.sid = s.sid and l.type = 'CF' AND l.id1 = 0 and l.id2 = 2; 2 3
no rows selected
Oracle version : 10.2.0.3
I am getting this error once in a month not everyday.
Starting Control File and SPFILE Autobackup at 2009-04-07 09:24:58
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 04/07/2009 09:25:03
ORA-00230: operation disallowed: snapshot control file enqueue unavailable
Please suggest me based on this..Thanks in advance.. -
Creating a new controlfile with datafiles in RMAN backup
Hi,
i am using oracle 10g (10.2.0.1) in RHEL5 server. i am trying to restore a RMAN backup from one server to another new server with new db name. i have taken out the spfile from RMAN autobackup and created pfile from it and edited the pfile with new dbname and directory structure and started the db in nomount with the new pfile. Now i have restored the controfile from the RMAN autobackup tried to put the database in mount state. But it failed due to the below error
RMAN-03002: failure of alter db command at 11/05/2012 21:44:56
ORA-01103: database name 'ORADB' in control file is not 'DEVDB'
Hence i shutdown the database and started the db in nomount with new pfile and tried to create the controlfile with the new db name,but it failed as it is looking for the datafiles.
ORA-01503: CREATE CONTROLFILE failed
ORA-01565: error in identifying file
'/u01/app/oracle/oradata/DEVDB/datafile/o1_mf_system_80jq0kfw_.dbf'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
All my datafiles reside in my RMAN backup. How to get the datafiles from RMAN backup in the above scenario??
Regards,
007Hello;
The location and filename and DBIS will be different, but you need something like this :
$ORACLE_HOME/bin/rman << EOF
CONNECT TARGET /
STARTUP NOMOUNT;
SET DBID 3754763357; #DBID of PROD database
RUN
ALLOCATE CHANNEL c1 DEVICE TYPE disk format '/u01/oradata/backups';
RESTORE CONTROLFILE FROM '/u01/oradata/backups/sb_t790762003_s85_p1';
ALTER DATABASE MOUNT;
SET NEWNAME FOR DATAFILE 1 TO '/u01/app/oracle/oradata/CLONE/system01.dbf';
SET NEWNAME FOR TEMPFILE 1 TO '/u01/app/oracle/oradata/CLONE/temp01.dbf';
RESTORE DATABASE;
SWITCH DATAFILE ALL;
RECOVER DATABASE;
release channel c1;
ALTER DATABASE OPEN RESETLOGS; So you need "SET NEWNAME" for all your files
Full Example
http://www.visi.com/~mseberg/rman/restore_database_without_catalog.html
Best Regards
mseberg -
Setting up new dbname/sid while creating oracle db from rman backups in 11g
Hi all,
I have rman backups and need to create another database from rman backups with different name... but it is unsuccessful..
created instance with new db...
running create new db connecting rman auxiliary sys/password@newdb
run {
SET NEWNAME FOR DATAFILE 1 TO 'F:\app\HOME\oradata\clonedb1\SYSTEM01.DBF';
SET NEWNAME FOR DATAFILE 2 TO 'F:\app\HOME\oradata\clonedb1\SYSAUX01.DBF';
SET NEWNAME FOR DATAFILE 3 TO 'F:\app\HOME\oradata\clonedb1\UNDOTBS01.DBF';
SET NEWNAME FOR DATAFILE 4 TO 'F:\app\HOME\oradata\clonedb1\USERS01.DBF';
SET NEWNAME FOR DATAFILE 5 TO 'F:\app\HOME\oradata\clonedb1\EXAMPLE01.DBF';
SET NEWNAME FOR TEMPFILE 1 TO 'F:\app\HOME\oradata\clonedb1\TEMP01.DBF';
DUPLICATE DATABASE TO clonedb
pfile 'D:\TESTDELETE\initclonedb1.ora'
BACKUP LOCATION 'F:\app\HOME\flash_recovery_area\orcl\'
LOGFILE GROUP 1 ('F:\APP\HOME\ORADATA\ORCL\REDO01.LOG') SIZE 60M REUSE,
GROUP 2 ('F:\APP\HOME\ORADATA\ORCL\REDO02.LOG.rdo') SIZE 60M REUSE,
GROUP 3 ('F:\APP\HOME\ORADATA\ORCL\REDO03.LOG') SIZE 60M REUSE;
Error it shown is in rman backup creation is as follows
<part>>
sql statement: alter system set db_name = ''ORCL'' comment= ''Modified by RMAN
duplicate'' scope=spfile
Oracle instance shut down
Oracle instance started
Total System Global Area 640286720 bytes
Fixed Size 1376492 bytes
Variable Size 314576660 bytes
Database Buffers 318767104 bytes
Redo Buffers 5566464 bytes
Starting restore at 20-DEC-11
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=133 device type=DISK
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:07
output file name=F:\APP\HOME\ORADATA\CLONEDB1\CONTROL01.CTL
output file name=F:\APP\HOME\FLASH_RECOVERY_AREA\CLONEDB1\CONTROL02.CTL
Finished restore at 20-DEC-11
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/20/2011 07:07:11
RMAN-03015: error occurred in stored script Memory Script
RMAN-06136: ORACLE error from auxiliary database: ORA-01102: cannot mount databa
se in EXCLUSIVE mode
RMAN> EXIT
how can i prevent rman setting db_name=orcl which is already exists in the db.. i need to create db from rman backups with different dbname...
whould someone help me out, how can i create database from another database rman backups with different dbname/sid on same host..
My pfile has new db_name , but while db creation rman setting to db_name to source dbname.. it should be new db name that i want create with new db name...
is there any RMAN command to specify new DB name it should set while running
sql statement: alter system set db_name = newdbname -- as part rman script execution...
it appears to be i should not touch the soruce db.. i have access to only source db rman backups and need to create another db with different dbname/sid.. please do help...When you performing RMAN duplicate why you making your script so complicated?
Your instance name and DB name can be different, But what is the contents in your pfile "D:\TESTDELETE\initclonedb1.ora" ? please do post
Have you started any other services related to ORACLE? check in start --> run --> services.msc any other active oracles services, Make sure you have clonedb1.
Startup in nomount
check the connectivity to target server.
SET NEWNAME FOR TEMPFILE 1 TO 'F:\app\HOME\oradata\clonedb1\TEMP01.DBF';Why you mentioning SET NEWNAME FOR DATAFILE ? You have option of db_file_name_convert/log_file_name_convert in case if your file system different in Target & auxiliary.
BACKUP LOCATION 'F:\app\HOME\flash_recovery_area\orcl\'When you have backup in same location why you are mentioning this clause?
First run duplicate from auxiliary server as
rman target sys/*****@prod auxiliary /
RMAN> duplicate target database to "db_name";
Am not sure what you are trying to do. is it 11gR1 or 11gR2?
You have option of duplicate from active database without having backup also..
here some links please check it.
http://docs.oracle.com/cd/E14072_01/backup.112/e10642/rcmdupdb.htm#BGBFDJHB
RMAN 11GR2 : DUPLICATE WITHOUT CONNECTING TO TARGET DATABASE [ID 874352.1]
knowledgespring
Newbie
Handle: knowledgespring
Status Level: Newbie (10)
Registered: Dec 26, 2007
Total Posts: 243
Total Questions: 77 (75 unresolved)
So sad that forum was able to help only in two answers out of your 77 questions :(
Edited by: CKPT on Dec 21, 2011 5:12 PM -
Error , ORA-19809 & ORA-19804 While restoring RMAN backup .
Hi Experts,
I am restoring production RMAN backup to UAT . Using below steps
1)rman target=/
2)RMAN> startup nomount;
3) RMAN> restore controlfile from '/orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl';
Starting restore at 05-AUG-10
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID=3 device type=DISK
channel ORA_DISK_1: copied control file copy
output file name=+DATA_ACME/acme/controlfile/current.256.724845209
output file name=+DATA_ACME/acme/controlfile/current.257.724845209
Finished restore at 05-AUG-10
4) RMAN> alter database mount;
database mounted
released channel: ORA_DISK_1
5) RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME1/current/%F';
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/orabkdump/Rman_Bak/ACME/%F';
new RMAN configuration parameters are successfully stored
6) RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
old RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters:
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/orabkdump/Rman_Bak/ACME/%U';
new RMAN configuration parameters are successfully stored
released channel: ORA_DISK_1
7) RMAN> CATALOG START WITH '/orabkdump/Rman_Bak/ACME';
searching for all files that match the pattern /orabkdump/Rman_Bak/ACME
List of Files Unknown to the Database
=====================================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
Do you really want to catalog the above files (enter YES or NO)? YES
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347594_1_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722347939_2_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348365_3_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722348681_4_1
File Name: /orabkdump/Rman_Bak/ACME/ACME_DB_722349076_5_1
File Name: /orabkdump/Rman_Bak/ACME/bkup_CTLFL_2206101206.ctl
File Name: /orabkdump/Rman_Bak/ACME/c-1904932673-20100622-00
List of Files Which Where Not Cataloged
=======================================
File Name: /orabkdump/Rman_Bak/ACME/dbsnap.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.log
RMAN-07517: Reason: The file header is corrupted
File Name: /orabkdump/Rman_Bak/ACME/rman_Tuesday_LVL_0.trc
RMAN-07517: Reason: The file header is corrupted
8) RMAN> run {
2> set until sequence 1789 thread 2;
3> restore database;
4> recover database;
5> sql 'alter database open resetlogs';
6> }
executing command: SET until clause
Starting restore at 06-AUG-10
using channel ORA_DISK_1
Finished restore at 06-AUG-10
Starting recover at 06-AUG-10
using channel ORA_DISK_1
starting media recovery
channel ORA_DISK_1: starting archived log restore to default destination
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2803
channel ORA_DISK_1: restoring archived log
archived log thread=2 sequence=6051
channel ORA_DISK_1: restoring archived log
archived log thread=1 sequence=2804
channel ORA_DISK_1: reading from backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of recover command at 08/06/2010 23:10:38
ORA-19870: error while restoring backup piece /orabkdump/Rman_Bak/ACME/ACME_AL_726286927_57_1
ORA-19809: limit exceeded for recovery files
ORA-19804: cannot reclaim 49283072 bytes disk space from 5218762752 limit
** My UAT database should be in noarchival mode . Generally such errors have been observed during backup , but have no clue why they occurred during recovery .Please advice .
Thanks
Edited by: user11981514 on Aug 6, 2010 9:46 AMHi,
Since the error ORA-19809 indicates the lack of space in flash recovery area during the media recovery, I suggested increasing the value of the parameter DB_RECOVERY_FILE_DEST_SIZE.
Yes, during the media recovery the RMAN will restore the archived log to the default destination (only if the required archived logs are not already on the disks).You can confirm the restore location of the archived log in RMAN restore log/destination specified by parameters log_archive_dest_1/db_recovery_file_dest.
Regards,
Vaibhav -
Restore spfile from rman backup ---- error.
Hi,
I am trying to execute recovery on new machine ...
I have done the following steps..
I have one database as ora10g2 as peroduction database on one machine as hosta
I have created a catalog on another machine cora10g2 (hostb)
I have taken a full backup from hosta as per following ...
the following command execute from hosta machine.
$ rman target sys/<passwd>@ora10g2 catalog rman/rman@cora10g2 ...
Backup completed ...
Now I am trying to restore this backup on hostb machine where i have already rman catlog database ..
I have done the following setting ...on host b
set oracle_sid=DUP
and execute following command ...
rman target / catalog rman/rman@cora10g2
RMAN> set dbid 2760732370
executing command: SET DBID
database name is "BAAN10G2" and DBID is 2760732370
RMAN>
RMAN>
RMAN> startup force nomount ;
startup failed: ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/oracle/dbs/baan10g2/dbs/initbaan10g2.ora'
starting Oracle instance without parameter file for retrival of spfile
Oracle instance started
Total System Global Area 159383552 bytes
Fixed Size 1977112 bytes
Variable Size 67114216 bytes
Database Buffers 83886080 bytes
Redo Buffers 6406144 bytes
RMAN>
RMAN>
RMAN>
RMAN> show all ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rman/backup/control/cntrl_%F';
CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/baanora3/rman/ora10g2/bkup_db_%d_s%s_P%p_t%t' MAXPIECESIZE 1024;
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
RMAN>
RMAN>
RMAN> list backup of spfile ;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
2420 Full 7.33M DISK 00:00:01 14-JUN-07
BP Key: 2426 Status: AVAILABLE Compressed: NO Tag: TAG20070614T182935
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070614-00
SPFILE Included: Modification time: 14-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2509 Full 7.33M DISK 00:00:01 15-JUN-07
BP Key: 2515 Status: AVAILABLE Compressed: NO Tag: TAG20070615T130416
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-00
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2694 Full 7.33M DISK 00:00:01 15-JUN-07
BP Key: 2739 Status: AVAILABLE Compressed: NO Tag: TAG20070615T131703
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-01
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2760 Full 80.00K DISK 00:00:01 15-JUN-07
BP Key: 2763 Status: AVAILABLE Compressed: NO Tag: TAG20070615T163437
Piece Name: /rman/spfile/spfile.ora
SPFILE Included: Modification time: 15-JUN-07
BS Key Type LV Size Device Type Elapsed Time Completion Time
2769 Full 7.33M DISK 00:00:02 15-JUN-07
BP Key: 2771 Status: AVAILABLE Compressed: NO Tag: TAG20070615T163441
Piece Name: /rman/backup/control/cntrl_c-2760732370-20070615-02
SPFILE Included: Modification time: 15-JUN-07
RMAN>
RMAN>
RMAN> restore spfile from autobackup ;
Starting restore at 19-JUN-07
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=36 devtype=DISK
allocated channel: ORA_DISK_2
channel ORA_DISK_2: sid=35 devtype=DISK
allocated channel: ORA_DISK_3
channel ORA_DISK_3: sid=34 devtype=DISK
allocated channel: ORA_DISK_4
channel ORA_DISK_4: sid=33 devtype=DISK
channel ORA_DISK_1: looking for autobackup on day: 20070619
channel ORA_DISK_1: looking for autobackup on day: 20070618
channel ORA_DISK_1: looking for autobackup on day: 20070617
channel ORA_DISK_1: looking for autobackup on day: 20070616
channel ORA_DISK_1: looking for autobackup on day: 20070615
channel ORA_DISK_1: looking for autobackup on day: 20070614
channel ORA_DISK_1: looking for autobackup on day: 20070613
channel ORA_DISK_1: no autobackup in 7 days found
channel ORA_DISK_2: looking for autobackup on day: 20070619
channel ORA_DISK_2: looking for autobackup on day: 20070618
channel ORA_DISK_2: looking for autobackup on day: 20070617
channel ORA_DISK_2: looking for autobackup on day: 20070616
channel ORA_DISK_2: looking for autobackup on day: 20070615
channel ORA_DISK_2: looking for autobackup on day: 20070614
channel ORA_DISK_2: looking for autobackup on day: 20070613
channel ORA_DISK_2: no autobackup in 7 days found
channel ORA_DISK_3: looking for autobackup on day: 20070619
channel ORA_DISK_3: looking for autobackup on day: 20070618
channel ORA_DISK_3: looking for autobackup on day: 20070617
channel ORA_DISK_3: looking for autobackup on day: 20070616
channel ORA_DISK_3: looking for autobackup on day: 20070615
channel ORA_DISK_3: looking for autobackup on day: 20070614
channel ORA_DISK_3: looking for autobackup on day: 20070613
channel ORA_DISK_3: no autobackup in 7 days found
channel ORA_DISK_4: looking for autobackup on day: 20070619
channel ORA_DISK_4: looking for autobackup on day: 20070618
channel ORA_DISK_4: looking for autobackup on day: 20070617
channel ORA_DISK_4: looking for autobackup on day: 20070616
channel ORA_DISK_4: looking for autobackup on day: 20070615
channel ORA_DISK_4: looking for autobackup on day: 20070614
channel ORA_DISK_4: looking for autobackup on day: 20070613
channel ORA_DISK_4: no autobackup in 7 days found
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 06/19/2007 18:00:13
RMAN-06172: no autobackup found or specified handle is not a valid copy or piece
RMAN>
I am not able to restore spfile from rman backup ;;;Hi,
I would like to know few things
1. How are you setting the db_name ? you can set db_id at RMAN, how are you setting the db_name ?
2. Do you have any default init file at default location ? if yes, is the db_name parameter set correctly in that file ?
Since spfile is yet to be restored, you must set the db_name parameter correctly before you start spfile restore.This can be done with init file at default location which can even contain just one paremeter i.e db_name. -
How to find out when last rman backup was made in 9i
Hello,
i have an oracle 9i database running on windows here. Is there a way to find out when the last rman backup was done with a sql query?
I would like to create a job inside the database that regulary checks if a rman backup ran sucessfully instead of using scripts in the operating system.
But i only know about commands in the rman utility (that i can not execute as a job, right?) - is something similar possible with for example sqlplus?Hello,
this gives some results, but none of the views begins with RC:
ALL_DIM_HIERARCHIES
ALL_SOURCE
ALL_SOURCE_TABLES
ALL_SOURCE_TAB_COLUMNS
DBA_DIM_HIERARCHIES
DBA_RCHILD
DBA_REGISTRY_HIERARCHY
DBA_RSRC_CONSUMER_GROUPS
DBA_RSRC_CONSUMER_GROUP_PRIVS
DBA_RSRC_MANAGER_SYSTEM_PRIVS
DBA_RSRC_PLANS
DBA_RSRC_PLAN_DIRECTIVES
DBA_SOURCE
DBA_SOURCE_TABLES
DBA_SOURCE_TAB_COLUMNS
USER_DIM_HIERARCHIES
USER_RESOURCE_LIMITS
USER_RSRC_CONSUMER_GROUP_PRIVS
USER_RSRC_MANAGER_SYSTEM_PRIVS
USER_SOURCE
Edited by: user590072 on 22.06.2010 05:49 -
Creating a standbay database from an rman backup
hi,
I have a situation that a standby database has a large gap in archive log files, the primary server does not now have those files. I understand that you can create a standby from an rman backup of the primary but all reading I have done shows thatn you have to have a recovery catalog to carry this out. The system I am on does not have such a catalog so is there any other way to do this?
regards
AlanRequirement 'You must have a recovery catalog in a standby requirement' is a little bit misleading. In fact you can do what you want : creating a standby from RMAN backups without having a recovery catalog. 'Duplicate target database for standby' does not require a connection to a recovery catalog.
You need mandatorily a recovery catalog, when you plan to take backups from the standby later on in order to free the primary from this task. The reason for that is it's not possible to transfer backup records from the standby controlfiles to the primary ones directly. After a backup on the standby you resync the catalog with the standby controlfile. Then you connect to the catalog and the primary,resync again and have actual backup informations in the primary controlfiles. When there's a media recovery problem, you easily can restore/recover the primary.
Werner -
Issue Creating Duplicate Database on Different host using RMAN Backup
HI friends..
I m trying to create a duplicate db on different host ....... 27
i have live production db on ............. 15
its up 24*7.
i know how to create dup db using cold backup..but dont know how to create it using RMAN Backup..
I have googled..but getting issues..
Steps Taken till now
Note- I dont have catalog created on live db..
I already have set the tnsnames.ora on both servers
1) Took full backup plus archivelog plus control file on 15
2) moved it to another host..ie 27
3) now on live db..
I conected to rman target /
so i m now connected to prod db
than i try to conect to rman auxiliary sys/sys@dubpd..
But it gives me insufficient privilages error..
Can you tell me what to do next..Coz unless i get into mount phase on sever 27( new server)..i cannot use the control file from backup).my dupdb is up in nomount phase..but what enxt i can do..to restore the control file and than restore the backup after cataloging them to right path..
Thanks in advance frieds...sai121 wrote:
Nope ..on live db..
@comand prompt when i type sqlplus sys/sys@dupdb..
its says 0ra-12518...Listener cannot hand off client connection..
My tns name for live server is..*primary* on live server .. whose ip is 15..(lIVE SERVER).
i also have another entery with tns names- standby .on live server .. whose ip is 27..(other server for duplicated db).
now @command prompt..@live server.. i did sqlplus sys/sys@standby
It gives me ORA-12518
Am i missing something..1- It could be a network problem. You may enable tracing on listener (and examine the logs).
2- Add "DIRECT_HANDOFF_TTC_LISTENER=OFF" to listener.ora, then reload the listener
3- You may want to increase "large_pool_size"
Maybe you are looking for
-
Some emails received with empty attachment file but visible in SAPOffice
Hi, I hope someone can shed some light on this. I couldn't find anything in OSS regarding this issue. Our client suddenly started having a problem where emails sent out of the system containing .PDF attachments are being received sporadically as bl
-
HT4847 Hello anyone know how to get a refund on extra i cloud storage?
I just purchased 10GB of extra storage and now want to get a refund, anyone know how to do that?
-
Can I still have multiple windows in new versions of iTunes as befire?
With previous versions of iTunes I was able to have the iTunes store, my library and other libraries in separate windows. It seems with newer versions that is no longer possible. Does anybody have figure out how to it?
-
I am using an iPhone 4 and when I try to search in Safari it just keeps loading and reloading. The status bar appears to be moving, but then it resets. It does this all very quickly. After 45 seconds or so, a message from google appears saying "We're
-
Warning: directory permissions differ
I am getting an error when downloading and installing packages with pacman. This is what I get: $ sudo pacman -S nitrogen warning: nitrogen-1.2-1 is up to date -- reinstalling resolving dependencies... looking for inter-conflicts... Targets: nitrogen