During installaion of PI-7.0 our SLD works fine but IB some problem

During installaion of PI-7.0 our SLD works fine but when we want import SWCV from SLD in IR it gives error
"UNABLE TO READ SWCV FROM SLD "SERVER3 50300(PORT).
GIVE ME SOME DESCRIPTION TO SOLVE THIS PROBLEM

Hi,
Might be Integration to the ABAP backend might be missing.
For more information go thru this threada.
User roles in Integration Repository
PI NWSR1 can't log into IB only with PISUPER
Regards
Agasthuri Doss

Similar Messages

Synchronization from SLD to LMDB is working fine, but data is not written to Software == Product Instance

Dear Gurus,
Synchronization from SLD to LMDB is working fine, but data is not written to Software ==> Product Instance section tab. What could be the problem ? Normally it should gather automatically, but pushed me to select manually lots of component ???
Here is collecting is working fine !!!

Hello Kemal,
You have to ensure that your Technical System info is properly filled automatically.
In LMDB you first create its Product System on LMDB Start Screen ProductSystem tab, after that please assign its respective Technical System. You probably need to run the Verification Check in order to confirm that your Product System has all Product Instances according on Technical System's Software Component Versions.
Regards.
Luis Roel

Owns IPhone4S, got "drown" during typhoon Yolanda (Haiyan 11/2013); doesn't work anymore but unit still looks brand new, what to do?

I have an iPhone unit - Iphone 4S, had it since 2012 through a local telecommunications provider (Globe Phils). My unit which has a 16G memory was running on IOS 7. When typhoon Yolanda struck our city (Tacloban) my iPhone 42 was one among the "casualty". I couldn't save it on time when sea water rushed into our house, taking my family by surprise. I was using my iPhone 4s to monitor news and weather update at that time. When the power in our place went out, i unconsciously put the unit on top of our dining table, unaware that the storm surge will reach our place (about 5km from the city proper but about a km from the nearest shoreline). While the water was still chest high i remember my phone and tried searching for it. i used my feet/toes literally to find it on the ground (floor) until i finally reached for it in one of the rooms downstairs. When i finally got hold of it, it was really, really soak in water and mud (yes the water was muddy, learning later on that it was sea water that drown some of the houses in our city).
I sun dried it immediately. I tried having it repaired in Manila after about two weeks since the storm, but the repair center said that it was beyond repair.
My iPhone 4S looks good as new, no scratch whatsoever (i covered it with skin in all the time i was using it until Yolanda came). yet it doesn't work. A said reality.
What should i do with the unit? I have already a new unit iPhone 6+.
Anticipating a prompt reply. Thank you and more power.
Ms. Valuis

There really isn't much to say. Water damage isn't covered by Apple's warranties.
Total submersion in muddy seawater will cause the components to corrode terribly. It needed to be flushed out before the seawater had any chance to dry - the salts & impurities are what corrode the components. Washing in pure clean water may have helped at the time but 2 years after the event is far too long to expect that to work.
The repair centre are probably correct - it is dead & it would be simper to replace the entire unit, sorry.
Did you have backups in iCloud or iTunes? If those are safe you can restore the data to another device, otherwise that will be unreadable on the device.
Your only option would be to contact your insurance company or possibly the company that you purchased it from but I expect typhoons may not be covered by many insurance policies or warranties.
I hope you are getting back to normal after this terrible event, good luck.

Our AirPort works fine with two MacBooks in the house, but not my iPhone or a PC laptap...why?

Help. We live in a house with 3 people. Two of us have macs, the other PC. The girl with the PC has never been able to connect to the wi-fi. Her computer will show full bars, but will tell her that it is unable to connect. Then I got a new iPhone and same thing...strong network signal, correct password, but it tells me that it cannot connect. Why does this happen? Why won't airport let us connect?

AT&T has not completely updated the MicroCell page and links. The new MicroCell is the black DPH-154 model which is replacing the white "Y" shaped models and you describe it. Functionally, they are currently the same. The only difference is that Cisco/AT&T has done away with the external antenna port and the Computer port. It's not a money making scam.
You can have multiple phones connected to the MicroCell at any one time without issues. One of the iPhones I assume has the phone number that is associated with the AT&T mobile account. That should be the phone number used to register the MicroCell with (what we call the primary number). The other iPhone, which I will assume is on the same account, needs to be added to the Approved Users List. Once you add the "problem" phone, turn off the phone and then turn it back on so that it can add the MicroCell to its cellular neighborhood.

Error 1931 during installaion of runtime

hello,
During installaion of the teststand runtime on a System preconfigured by our IT department error 1931 comes up and complains about not being able to update c:\windows\system32\kernel32.dll ( because it's protected by windows). Installed on that system is version 5.1.2600.1106 xpsp1 020828-1920 of that dll. I guess I have to update to the xpsp2 version of that dll to fulfill the requirements of teststand. Does anyone know on which bugfixes in xpsp2 does teststand depend on ? I want to convince our IT department to ship the needed version of kernel32.dll in their basic configuration.

hi markus,
I'm very sure that TestStand doesn't require XPSP2 and should also work on PCs with SP1. that shouldn't be the problem (but it wouldn't hurt to install SP2).
you (or your IT) should try the following, also it sounds crazy:
change the winxp language to English (USA) before installation (if you don't already use English).

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine.

Problem on PC: During import, I can locate the sources folder however the photo do not display. Was working fine. All file types, Lightroom is no longer recognising the images to import, The panel that usually displays them remains empty. Try using backup versions, removing software that could conflict , still no joy, has anyone had this problem?

Did you follow this procedure?
Our iTunes guru Terence Devlin advises the following:
1. Quit iTunes
2. Drag the iTunes folder from your internal hd - located in ~/Music folder - to your external hd. DO NOT delete the original one from your internal hd... yet!
3. When the transfer is complete, press and hold the Option(alt) key and fire up iTunes.
4. A "Choose iTunes Library" window will come up. Click on the "Choose Library" button.
5. Navigate to where the iTunes folder is located in the external hd.
6. Within the iTunes folder, select the iTunes Library file and click Choose...
That's it. iTunes will now display all your playlists, songs, movies, podcasts etc. At this point, should you wish, you can delete the iTunes folder from the internal hd to free up space.
More info:
http://support.apple.com/kb/HT1751
Or if you prefer a more complicated explanation:
http://www.ilounge.com/index.php/articles/comments/moving-your-itunes-library-to -a-new-hard-drive

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same fam

I have multiple devices in my family. Each of us has an iPhone and an iPad. Is there a way for each of us to have our own Apple ID but one account so we can all get the same music, movies, books, etc. I can't see paying twice for something in the same family.

Welcome to the world of digital media. Your can't really transfer it. I don't know what the rules are about transferring to your spouse but I do know that in some cases when you die, your heirs cannot inherit your digital media. This is why there is still an advantage to buying the CD since the usage rights belong to whomever holds the physical media.
A possible workaround is to burn the songs to a music CD with yout account (tracks only without song titles) and then having your wife upload it as a regular music CD onto her account. It's been a while since i've done this so I'm not sure if it would work now.
Please note that I'm not advocating copyright and/or TOS violations. I'm only suggesting ways to copy music for your own personal use which has traditonally been permitted. I only did this because I wanted to convert iTunes songs to mp3 files so I could burn them onto a data CD for use in my car. It would make sense that since married couples are a joint entity, this would be personal use.
Also, I'm not a lawyer so don't take this as legal advice.

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1.

I have a column where I have implemented writeback, its working fine. On top of this I need to show 0 as No and 1 as yes in our report, that is also done. Now I want to enter Yes in a column where it was no and I want database table to get update with 1. I am not sure how to do it. SOmeone please help me out.

Hi ,
In your write back XML try the below query insert
INSERT INTO TABLE_XYZ (attribute1) values (SELECT CASE WHEN @{C1}=’Yes’ then 1 when @{C1}=’No’ then 0 else null end from dual)
Regards
Rajagopal

Using a phone teathered HTC to access internet and trying to register our new ipad 2 but itunes store wont work.. i assume its to do with ports but we dont have the full internet, is there any work around? normal intenet download and other stuff works..

hi there,
me and my girlfiend just got an ipad 2 and were trying to register it but itunes will not connect to the store, i have run diagnostics and the internet has come up green, itunes connectivity as yellow and secure connection as red. i belive this is due to us running our internet off a tethered phone (htc desire) using tmobile as the provider ( the ports must need to be open) we havent got a dsl or cable line and the internet off the phone works fine for everything else..
i may be wrong about the ports but can someone please shed some light on why the store wont connect? seems strange that everything else works except itunes store and we cant even use the ipad yet as its saying it needs to connect to store, has anyone else encountered this problem? please help.
taz

hi there,
me and my girlfiend just got an ipad 2 and were trying to register it but itunes will not connect to the store, i have run diagnostics and the internet has come up green, itunes connectivity as yellow and secure connection as red. i belive this is due to us running our internet off a tethered phone (htc desire) using tmobile as the provider ( the ports must need to be open) we havent got a dsl or cable line and the internet off the phone works fine for everything else..
i may be wrong about the ports but can someone please shed some light on why the store wont connect? seems strange that everything else works except itunes store and we cant even use the ipad yet as its saying it needs to connect to store, has anyone else encountered this problem? please help.
taz

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

My wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the photo

my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?

my wife and I share an iCloud account for photo library and iCloud drive mainly for our family photo management, but we use different accounts for iMessage/facetime/calendar/etc. With Yosemite, I can't use continuity/handoff without dumping the primary photo iCloud account and thus our shared photo system. We are running yosemite OS X 10.10 and iOS 8.0.2... Is there any way to do this?

I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

I am trying to add my sons email address to our family apple id but it says that it already associated with another apple id. How can i find out what the apple id is and take his email address off that one?

You may be able to find your Apple ID at Look up your old and forgotten Apple ID

Just set up our Apple TV and it works fine for NetFlix. However want to stream photos and I Tune library from home computer but this computer accesses the internet thru a VPR at my wife's place of enployment. Other than a 2nd computer any suggestions?R

Just set up Apple TV on home network. Works fine for NetFlix but we can't stream I Tune libruary or digital photos thru it to our home TV as because of my wife's work we bypass COX and access the internet thru a VPN offered by her employer. Was told we either have to buy a second computer (two expensive for just these two functions) or keep turning on and off the VPN(not practical). Any other ideas? Thanks

Does she need to access the internet through her employer, or is she just trying to access her internal network at work?
If it's the latter, split-stream VPN clients (like Cisco AnyConnect) will split traffic so that only that directed at a particlar domain gets tunneled.
I have an AnyConnect client at home, but I normally only activate it when I'm using it, so I've never tested it with HomeSharing. I'm currently traveling, but when I get home tomorrow, I'll try it out and let you know if it works. If it does, your wife can check with her employer to see if she can configure AnyConnect to work with them.

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

I want to disable or remove Game center from my iphone. It's always pop up during i play hay day game. So i can not solve this problem. Any way i try to log in game center my several Apple id account but it does' not work. I am still stuck in log in page

The Game Center app is pre installed and cannot be removed from the device.
Best thing to do is move it to the last available screen.
Hold down the Game Center app until all the apps jiggle then sliide the Game Center app to the right from one screen to the next. This requires a bit of finesse, but it's doable.
Press the Home button one time to stop the apps from jiggling.
For the Apple ID issue, try resetting.
Tap Settings > General > Reset > Reset All Settings
Then try your Apple ID and password for the Game Center app.

Both myself and my wife have 2 separate iTunes accounts, I subscribe to iTunes Match. Music purchased on my wife's account appear on our computers iTunes library but my iPad cannot access the music she has purchased. Is there any way to overcome this

Both myself and my wife have 2 separate iTunes accounts, I subscribe to iTunes Match. Music purchased on my wife's account appear on our computer iTunes library but my iPad cannot access the music she has purchased. Is there any way to overcome this

The only way to do what you want is to log into your wife's iTunes Store account on your iPad. Doing this will lock you out of your account for 90 days.

During installaion of PI-7.0 our SLD works fine but IB some problem

Similar Messages

Maybe you are looking for