During modification of n1patorg one movement type should get copied
Hi All,
we need to copy the movement type (BEWAR field from n1vkg) from one position to all the other positions to ease up the task.
the transaction we are using here is N1patorg.
Gerd,
thank you very much. I searched a little as well and I found this:
"Data transfering from sub-vi to main-vi "
http://forums.ni.com/ni/board/message?board.id=170&message.id=47364&query.id=3803#M47364
which seems to be the solution.
Greetings
Johannes
Greetings Johannes
Using LabVIEW 7.1 and 2009 recently
Similar Messages
-
I have an iPad 4th Gen with Retina Display. I want to watch movies on an airplane. I downloaded downloaded one movie successfully from digital copy, but my next movie only plays when I am connected to wifi, and the other one is the same way now
Hi there slogrown,
You may need to download these purchases directly to the device. Take a looke at article below for more information.
Downloading past purchases from the iTunes Store, App Store, and iBooks Storehttp://support.apple.com/kb/HT2519
-Griff W. -
Movement type 311- get value against a material
Hi All,
I can get a report of stock value and qty against a material from MCBE report.
But for movement type 311,I am getting only the stock qunatity but not value.
Will there be associated value for this movement type.
Is there any other way where I can see associated value.Please suggest.
Thanks in advance.Hi,
Mvt type 311 is the transfer between storage location to location in the same plant. Only quantity will be updated and no value will be updated because the valuation area in the same plant.
Here only material document will be generated and no accounting document.
You can see the stock report in t code MB52 locationwise stock with value.
Regards
Ram
Edited by: ramachandran subramanian on Apr 6, 2009 10:02 AM -
103 movement type not getting extracted
HI Gurus,
103 movement type is not getting extracted in 2lis_03_bf.
Do we need to do any config/code for this ??
Regards,
Sunitahi,
Your specific error and resolutiobn is explained in
SAP Note 827178 - 2LIS_03_BF/_UM: Individual documents not extracted
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=827178
we had done the changes mentioned in the above note and resolved the issue in our system.
regards,
Arvind. -
Could I use other movement type in ME2O copy from 541?
Dear friends,
Could I use ME2O with other movement type copied from 541 ? or only with 541 ?
Is it customizable ?
Best regards,
AleYou can Use only 541 Movement Type in ME2O that too System Propose this Automatically. So, You cannot Select Movement Type in ME2O.
You can use MB1B also For Transfer Stock to Subc. Using 541 Mov type. MB1B is Multipurpose.
Regards,
Ashok -
On the basis of Sales item Text, item should get copied to Return order
Hi
I am creating Return order With ref to Billing Doc.
when i click on copy one popup is coming that is for Sales item Text.(I want to click on Copy & not Selection List B'cos in Selection List Sales Text will not come)
So as per the Text i should select the material in Return Order.
but when i click on red cross on Sales text window(POP Up), that material also getting copied in SO, which was not happening earlier...
any configuration in Sales Text is there or some Userexit is there???
Reg.
AmolHi AL,
As such, this is a basic functioanlity of MRP.
Once you enter a forecast & take a MRP run system proposes, when to start the production based on the production leadtime & purc.reqns for the raw materials based on the procurement lead time.
And the same can be viewed from various reports..FOr example MD04.
For this to work the MRP configurations should be valid.
Could you please confine your question to a specific query..?
Thanks & regards
Mahesh -
Shipping type not getting copied in delivery from route
Hi,
Does any one whether as a SAP standard does shipping type as mentioned in Route gets copied in delivery document header.
If no then what are the options to get it populated. Which user exit do we use?
Regards
VivekHi,
In 0VTC maintain route & stages
Then determine the route in delivery on basis of transportation zone or on basis on delivery type then it will populate
If you are not determining then in delivery under TRANSPORT tab maintain route
kapil -
Movement types used in STO one-step process
Dear all,
Presently the one-step STO process in my system uses mvt 645 for Good Issue and mvt 101 for goods receipt. I need to have it use a custom copy of mvt 101 for goos receipt.
Does anyone know where this setting can be changed? Can it be changed?
Thanks
Cao HuyHi
Please make use the above link
and the transcation Code: OMJJ.
Copy, Change Movement Types
Assuming want to create another movement type Z01.
Transaction OMJJ
Select the standard movement type 101
Click copy, then overwrite the 101 with Z01
Click the Enter button, then click Copy all
Select the new movement type Z01
On the left hand column screen, click Reversal/follow-on movement
Fill in the reversal movement type
*For the rest of the options, you can leave it alone or change it depending on your requirement *
Rgds
RG -
Cancellation of Mat Document for Return delivery mov 161(Here Mov Type 922)
Hi SAP Support,
Myself got an issue relevent to Wrong MIGO. User due to wrong concept did MIGO where Movement type was 922 though its return PO (Means Return PO
is ticked - Mov type 161).
Explanation : At the time of MIGO , default movement type was 101, so automatically it should pick 161 at the time of Good Received.
But here when the user open the MIGO Screen, last movement type was showing i.e. 901. And user did MIGO where it changed automatically to 922.
Now when I cancelled the document, flow was :
a. 5000147271 - 922
b. 5000151684 - 161
c. 5000151730 - 162
d. 5000152339 - 161
Which is wrong as per my perception and i.e. why not maching the same.
But while doing the Same in Quality Server with the Same Documents (Just refreshed 2 days back), flow is
a. 5000147271 - 922
b. 5000151684 - 123
c.s 5000151730 - 161
Which is perfect one. And this should be the results. Now my reuirment that how could I do managed the same way in Production. Please help me.
Regards,
PinkuHi,
Can you please explain as to what this "9" series movement type represent.Is the movement type "922" a copy of the movement type "122" ?
Kindly make a note that the reversal movement types are determined from the configuration for "Copy ,Change Movement types" T code - OMJJ. Here select any movement type & click on "Reversal/follow-on movement types" for which you want to know the reversal movement type. Hope this gives you an idea for resolving the issue.
Regards
Swapnil -
Disable Shelf Life Expiration date for Movement Type 311
Hi All,
Whenever we run the transaction MB1B with the movement type 311, it copies the batch and its shelf life expiiration date. Due to this, there are time when the user unknowingly enter a differrent SLED and hence change the batch unknowingly. We want to stop this. We want that while we are doing 311, the batch record and the SLED should get copied from the batch master BUT the field for SLED should be grayed out or the user should not be abale to enter ANYTHING in the SLED and the system should take the default SLED from batch master. Can we achieve it through config ? Please suggest.Please get a user exit developed and add it to the program SAPMM07M which is used in MB1B which will solve your purpose. The User exit should be fired when using 311 movement type during copying of Batch Characteristics. Hope this helps you.
-
Stock Transfer for Excisable Materials Using Movement Type 301
Hi,
We are having a Plant 1002 as excisable Materials.
During GR we following the process like GR (Part -I), Capture Invoice, Post Invoice.
Can we transfer the Material from Plant 1002 to other Plant, say 1001, using Movement Type 301?
Or we need to follow some other router for Stock Transfer for the Excisable Materials?
I was told by the ex-consultant that we would be using Mov Type 301 for all Stock Transfers, but I have a doubt, please guide.*
Regards,Hi PK,
Here in Brazil we work with excisable material and when we have to transfer it plant to plant, we have to use IVA that performs tax posts on accounting document. Also, we have to create Nota Fiscal (BrazillianLegal Document).
I think you have to talk to your legal/accounting area in order to make sure which procedure you will have to use.
If you need tax posting on accounting document, then you will not be able to use 301 movement type.
We use MM/SD Plant to Plant transfer (movement type 861 / 862)
Depending on your Legal/accounting area feed back, you could use this scenario or just MM plant to plant transfer (movement type 303/305).
If they are ok with no tax postings on accounting document, then 301 movement type should be used.
Try to make a test, show then how it works, then you could get ok from then
I hope it helps you.
Best Regards,
Natan -
Movement type to use without refering a PO and move to Unrestricted stock?
Hi,
Can i make a goods receipt with out referring a purchase order, if so what movement type should I use to move the goods to unrestricted stock so that i can use it in sales order. Can any one suggest me?
Thanks
VijayHi
T-code MB1C
Movement type 561
Kapil -
Movement Type 102, 122, 161
Hello Experts,
Please guide me regarding the use of movement type 102, 122 and 161 movement types.
What are the scenarios where the above movement types should be used and what are the reference documents to be used for all above processes.
Also if QM is active then how to use these movement types.
What are the accounting effect that went during posting with above mentioned movement types.
Regards,
AshutoshHi ,
Please find the details of the movement types
I) 101 Goods receipt for purchase order or order
If the purchase order or order has not been assigned to an account, a stock type (unrestricted-use stock, stock in quality inspection, blocked stock) can be entered during goods receipt.
If the purchase order or order has been assigned to an account, the goods receipt is not posted to the warehouse, but to consumption.
In the case of non-valuated materials, the goods receipt is posted to the warehouse, although the purchase order has not been assigned to an account.
Possible special stock indicators:
o K Goods receipt for purchase order to consignment stock
o O Goods receipt for purchase order to stock of material provided to vendor
o E GR for purchase order or order to
o sales order stock
o Q GR for purchase order or order to
o project stock.
Goods receipt for subcontract order : at goods receipt, the consumption of the components is posted at the same time (see movement type 543)
Goods receipt for
stock transport order : at goods receipt the transported quantity is posted in the receiving plant from stock in transit into unrestricted-use stock (or stock in quality inspection, blocked stock).
The cancellation or reversal of movement type 101 is the movement type 102.
II) 122 - Return delivery to supplier or to production
Using movement type 122, you can distinguish real return deliveries for a purchase order or order from cancellations (102).
In the standard version, you must enter a reason for the return delivery if you are using movement type 122. In this way, evaluations of return deliveries are possible.
The effects of movement type 122 correspond to a cancellation of movement type 101.
III) 161 Return for purchase order
If a purchase order item is marked as a returns item, the returns to vendor are posted using movement type 161 when the goods receipt for purchase order is posted.
Movement type 161 has the same effects as movement type 122
I think this may give clear idea about movement types
Thanks,
Arun G -
Movement type from restricted to block
Dear ALL,
I have a scenario of Deadline Monitoring, in which one the material date get expired it went to restricted stock and from there directly to block stock..So which movement type should i used for such scenario.We used presently QA05 T-Code.
Regards,
AsifHi Asif,
I assume that you have decided to go with the Z program suggested earlier.
Now You just want to make sure that records passed using this program are of QA07.
If TCODE2_MKPF is not available in MSEG, then i would go with reference to MKPF table.
First of all i shall get the list of restricted batches from MCHB (Or May be MCH1),
Then Pass Material, Plant, Batch and Movement type as 341 to MSEG,
And then i would pass outcome of this to table MKPF and check field TCODE2.
Dont forget that I am currently not able to check in my system whether system puts QA07 in TCODE2 field of MKPF at the time of 341 mvt (When it is restricted). Please confirm before proceeding.
moreover, i did not get about the effect your team is concerned about.
It will be good if you execute by yourself, means check these tables with right sequence and at the end you will be able to judge whether this logic gives you correct list of batches needs to be transferred to blocked.
Amol. -
Where do we assigned movement types to schedule lines
hi genius
where do we assigned with this movement types system should pick this movement types. can we create our own movement types in sap
can we use one movement types both transactions.
how system will knows this movement types should come with schedule line how it will come we knows generally schedule line it will come is thery any assignement between them
Thanks in advanceHi Nag,
You can configure the movement typ efor the schedule line in the tcode VOV6.
But, if you want to create a new movement type, it is always in the domain of MM and hence it is better for you to consult with them and ask them to create the movement type.
Once it is created, you can just assign that to the schedule line in tcode VOV6
Hope this helps.
Reward if this helps you
Maybe you are looking for
-
HT201250 What if Time Machine can't find my airport time capsule?
I can't find my airport time capsule on my computer... I need help in order to reach documents saved on my airport time capsule used as an external hard drive... Please help!
-
How to address poor customer support
In January, I ordered a Yoga 2 Pro. The laptop arrived and met my expectations. Approximately 4 weeks later it refused to boot up. I called Technical Support. Technical Support was less than helpful. They had me try a couple things via phone, the
-
Error when uppload a employee pic
Hi folks (sorry for my English): I have a trouble, because its necessary to show the photo associated to a specific employee, using Portal. First, I need to upload the images, and for that reason Im using the ArchiveLink All the step, were develop
-
I finally uploaded the now operating system 5.0 and set up iCloud. It rearranged all my apps on my iPhone, and took my NYTimes app out of the folder I set up for all my news apps and now I can't get it out. Nor can I move my other news apps onto the
-
Upgrade questions for early 08 iMac from SL to Lion and Vista to Win 7
I've been doing a lot of reading on this forum and elsewhere and have a few questions on the best way to do this so it goes smoothly with the least amount of issues. My configuration is in my sig below. Unless someone talks me out of it this I want