During normal operation (fresh install, no plugins) periodically and unpredictably hangs for about 15 seconds before continuing.
Program hangs for a number of seconds before continuing. All operations within the window are arrested.
Attempted reinstall of Firefox 6.0, and also disabled all plugins. Reenabled plugins (shown in info. below). Attempted rebooting.
Problem occurs periodically, at random intervals when browsing, typing, or doing any task.
I assume that it isn't caused by an extension and that it still happens with all extensions disabled?
Which security software (firewall, anti-virus) do you have?
Create a new profile as a test to check if your current profile is causing the problems.
See Basic Troubleshooting: Make a new profile:
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Similar Messages
-
I need help to fix this problem, I've tried re-installing Firefox and flash, but to no avail.
Anyone?
-
Pavilion DV7 2120 ed, above 90 degrees C during normal operating, 1 year old
Hello,
My HP Pavilion dv-7 2120 ed has recently had his first birthday. Unfortunately the fan started working harder and harder. Yesterday I didn't trusted it anymore, therfore I downloaded Speedfan. He told me during normal operating (internet + music player) that the CPU reaches a temperature above the 90 degrees Celsius.
Quite a shock!!!
He doesn't seem dirty from inside.
Does someone have the same problem with the same notebook?
How come?
But more important, what can I do?
Thanks in forward
William
HollandEven if there is not visible dirt when you just open the keyboard, for example, sometimes there is a dust clot blocking the fan outlet, that you cannot see until you open it all the way up. After one year it could use new thermal compound between the processor and heatsink, too.
-
About a month ago, I began periodically getting the spinning wheel while trimming, adding titles or transitions, etc. It lasts for about 15 seconds and then goes away. This seems to happen once every minute or two. I have more than enough RAM/Power, etc. About every other time I use FCPX it will spontaneously close (typically when editing a title). None of these things were happening previously. I have lots of projects that I store on Promise Pegasus drives via Thunderbolt. I only keep a few projects and the associated events open in FCPX at a time, otherwise I use Event Managaer X to keep track of them. Can anybody give me any suggestions as to why this is occurring and what I can do to remedy it? I have the latest version of FCPX as far as I can tell. This is driving me mad and costing me significant time while editing. By the way, I am doing just basic editing. Essentially trimming, cutting and adding some transitions and a few title screens. Thanks in advance for your help.
These apperarances of the spinning wheel tend to be related to some io operation that takes too long. Maybe the finder is trying to reach a network server that became unavailable.
I would try clearing caches and do an overall maintenance with an utility like OnyX.
Also, trashing preferences does no harm and is often the first troubleshooting measure when FCP X misbehaves. -
after installing the latest upgrade firefox just hangs when opening - was fine before. have tried deleting restore session but worse not better now. no change with firewall.
== This happened ==
Every time Firefox opened
== yesterday, after installing the upgrade ==
== User Agent ==
Opera/9.80 (Windows NT 5.1; U; en-GB) Presto/2.5.24 Version/10.54I'm using Mac OS 10.4.11 & even typing this message the characters appear so slowly that I could get a hammer and chisel and inscribe the words faster than the new Firefox runs. WTF?
-
Hi, I just installed my Creative Suite 6 and the programs close right after launching (for about 5 seconds) with no dialog box about an error. I have tried uninstalling and re-installing but still the same thing. Help pls!
Sign in, activation, or connection errors | CS5.5 and later
Mylenium -
Was installing new ios 7 and it asked for acct and password. it did not like and said it would email a new password. no email received. can not figure the Apple support screens to find a phone number to call. help.
No need for alarm. There are several folks a day posting like threads. Most folks know these phishing attempts for what they are and merely delete with prejudice.
To the bottom line... if you wish - and I am sure Apple will take notice - you should FORWARD the email to [email protected] and delete.
CCC -
My Mac air keeps on loosing wifi and when I want to switch it on it says "wifi hardware not installed" After about 5 minutes the wifi is back on, but only for about 10 minutes before loosing signal again. This is really frustrating.
I am also having the same problem.. Its too much annoying and its unfortunate nobody at apple support has anyclue of what is happening?
... This is happening almost most of the time keeping my phone down most of the times. -
2013 MBP 2.5 i5 4Gig 500MBHDD boots slow. It finishes post in the same time as an identical MBP, and then hangs for 30 seconds on one of the ethernet adapters, before finishing the boot. Once booted it is normal. Turning off airport changes nothing. Hardline adapter is not plugged in. Thunderbolt adapter is not used. Bluetooth is off. Did this out of box. Identical MBP boots to login screen in 36 seconds. Disk repair, permission repair, and safe mode boot have
already been done, no change. Boot time is consistent. Hangs at the same place each time. Right after post. Bad adapter?
Comments, solutions please.... and so ... now a few days later, success. I ran
your software but it told me nothing I hadn 't seen
in verbose boot.
Consistently, following good post, the boot hung
for 30 seconds on the adapters, (cards, chips, NICs.
Ethernet cards, whatever you prefer to call them)
either the airport card or the hard line. It would then
proceed at normal pace to the login screen.
Since it came out of the box that way, software
conflict was not a go. I guessed glitched driver or
fetch instruction. I zapped the PRAM (cleared
NVRAM) and reloaded the OS, updates, Garage Band,
iPhoto (one of Apple's true dogs in an otherwise
rare arena) iMovie, Photoshop, Lightroom, their
updates, and my files. MBP pro now boots to login
in 31 seconds. Note I have turned off as much gee
whiz, rubber band scroll, global swiping and other
hubcaps and hood ornaments as befits how like
things ... and turned off all the Asian and other fonts
I will. ever use.
Best guess ... corrupt driver or corrupt fetch script ...
bad server squirt at factory load.
Thanks for your help, Cheers! -
113 degrees Fahrenheit during normal operation.
I heard about heating problems on the 2011 MacBook Pro, and I was wondering whether 113 degree Fahrenheit durning normal operation (i.e. idling, Mail, simple Safari sites, etc.)?
Most MBPs run hotter than that most of the time. You are probably using yours very lightly. Don't even begin to worry until it goes over 180°F and stays there with its fans roaring. That may never happen, depending on how you use the machine.
-
Fresh Install: Gnome Shell segfault and bgrt invalid status (Nvidia)
Hi everyone! I have Arch freshly installed, and after some modprobing last night I was finally able to get the Arch repository Nvidia drivers working. That being said, I am still getting a "bgrt invalid status" message on boot up (and, for what it is worth I do not have an Arch splash screen). I have googled the issue which took me to a thread here on the Arch forums, but that was dealing with the Noveau driver and not Nvidia.
Below is my entire dmesg output, and would appreciate if someone might help me look through it and diagnose the Gnome segfault and any other issues that may be present. I am also looking for some advice as to the proprietary Nvidia drivers. I have a GTX 980, and while currently I don't need any advanced rendering, here when an upcoming game gets released on Steam, I very well may need that.
dmesg output [main concern near bottom at entry 2.875973]:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.3-3-ARCH (builduser@tobias) (gcc version 4.9.2 20150304 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d00bbf3b-182d-4b7f-9502-23eff99f42e5 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009d08dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d08e000-0x000000009d094fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009d095000-0x000000009d4f4fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009d4f5000-0x000000009d964fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009d965000-0x00000000bd92bfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bd92c000-0x00000000bdc97fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bdc98000-0x00000000bdcb5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bdcb6000-0x00000000be1defff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000be1df000-0x00000000bef51fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bef52000-0x00000000beffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000befff000-0x00000000beffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000083effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xbdc9e000 ACPI=0xbdc9e000 SMBIOS=0xf04d0 MPS=0xfd5d0
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000008000-0x0000000000048000) (0MB)
[ 0.000000] efi: mem02: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000000048000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem03: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem04: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000005f000) (0MB)
[ 0.000000] efi: mem05: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000000005f000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem06: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f3e000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f3e000-0x000000003795c000) (874MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003795c000-0x0000000037ca6000) (3MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037ca6000-0x0000000070a60000) (909MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000070a60000-0x0000000099a88000) (656MB)
[ 0.000000] efi: mem13: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000099a88000-0x000000009c090000) (38MB)
[ 0.000000] efi: mem14: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c090000-0x000000009c094000) (0MB)
[ 0.000000] efi: mem15: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000009c094000-0x000000009c0b1000) (0MB)
[ 0.000000] efi: mem16: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0b1000-0x000000009c0b2000) (0MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0b2000-0x000000009c0b3000) (0MB)
[ 0.000000] efi: mem18: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0b3000-0x000000009c0b7000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0b7000-0x000000009c0b9000) (0MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0b9000-0x000000009c0ba000) (0MB)
[ 0.000000] efi: mem21: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0ba000-0x000000009c0bb000) (0MB)
[ 0.000000] efi: mem22: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0bb000-0x000000009c0bd000) (0MB)
[ 0.000000] efi: mem23: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0bd000-0x000000009c0be000) (0MB)
[ 0.000000] efi: mem24: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0be000-0x000000009c0c2000) (0MB)
[ 0.000000] efi: mem25: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0c2000-0x000000009c0c4000) (0MB)
[ 0.000000] efi: mem26: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0c4000-0x000000009c0c5000) (0MB)
[ 0.000000] efi: mem27: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0c5000-0x000000009c0c6000) (0MB)
[ 0.000000] efi: mem28: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0c6000-0x000000009c0e2000) (0MB)
[ 0.000000] efi: mem29: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0e2000-0x000000009c0e3000) (0MB)
[ 0.000000] efi: mem30: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0e3000-0x000000009c0e4000) (0MB)
[ 0.000000] efi: mem31: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0e4000-0x000000009c0e5000) (0MB)
[ 0.000000] efi: mem32: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0e5000-0x000000009c0e7000) (0MB)
[ 0.000000] efi: mem33: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0e7000-0x000000009c0e8000) (0MB)
[ 0.000000] efi: mem34: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0e8000-0x000000009c0f0000) (0MB)
[ 0.000000] efi: mem35: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c0f0000-0x000000009c0f4000) (0MB)
[ 0.000000] efi: mem36: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c0f4000-0x000000009c114000) (0MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c114000-0x000000009c115000) (0MB)
[ 0.000000] efi: mem38: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c115000-0x000000009c116000) (0MB)
[ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c116000-0x000000009c117000) (0MB)
[ 0.000000] efi: mem40: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c117000-0x000000009c118000) (0MB)
[ 0.000000] efi: mem41: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c118000-0x000000009c119000) (0MB)
[ 0.000000] efi: mem42: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c119000-0x000000009c126000) (0MB)
[ 0.000000] efi: mem43: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c126000-0x000000009c128000) (0MB)
[ 0.000000] efi: mem44: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c128000-0x000000009c129000) (0MB)
[ 0.000000] efi: mem45: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c129000-0x000000009c12b000) (0MB)
[ 0.000000] efi: mem46: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c12b000-0x000000009c12e000) (0MB)
[ 0.000000] efi: mem47: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c12e000-0x000000009c130000) (0MB)
[ 0.000000] efi: mem48: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c130000-0x000000009c132000) (0MB)
[ 0.000000] efi: mem49: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c132000-0x000000009c135000) (0MB)
[ 0.000000] efi: mem50: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c135000-0x000000009c138000) (0MB)
[ 0.000000] efi: mem51: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c138000-0x000000009c13e000) (0MB)
[ 0.000000] efi: mem52: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c13e000-0x000000009c141000) (0MB)
[ 0.000000] efi: mem53: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c141000-0x000000009c142000) (0MB)
[ 0.000000] efi: mem54: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c142000-0x000000009c143000) (0MB)
[ 0.000000] efi: mem55: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c143000-0x000000009c146000) (0MB)
[ 0.000000] efi: mem56: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c146000-0x000000009c148000) (0MB)
[ 0.000000] efi: mem57: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c148000-0x000000009c149000) (0MB)
[ 0.000000] efi: mem58: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c149000-0x000000009c14a000) (0MB)
[ 0.000000] efi: mem59: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009c14a000-0x000000009c14d000) (0MB)
[ 0.000000] efi: mem60: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009c14d000-0x000000009cb1b000) (9MB)
[ 0.000000] efi: mem61: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb1b000-0x000000009cb1d000) (0MB)
[ 0.000000] efi: mem62: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb1d000-0x000000009cb1e000) (0MB)
[ 0.000000] efi: mem63: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb1e000-0x000000009cb1f000) (0MB)
[ 0.000000] efi: mem64: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb1f000-0x000000009cb23000) (0MB)
[ 0.000000] efi: mem65: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb23000-0x000000009cb27000) (0MB)
[ 0.000000] efi: mem66: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb27000-0x000000009cb28000) (0MB)
[ 0.000000] efi: mem67: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb28000-0x000000009cb2b000) (0MB)
[ 0.000000] efi: mem68: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb2b000-0x000000009cb4e000) (0MB)
[ 0.000000] efi: mem69: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb4e000-0x000000009cb52000) (0MB)
[ 0.000000] efi: mem70: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb52000-0x000000009cb53000) (0MB)
[ 0.000000] efi: mem71: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009cb53000-0x000000009cb59000) (0MB)
[ 0.000000] efi: mem72: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009cb59000-0x000000009d08e000) (5MB)
[ 0.000000] efi: mem73: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x000000009d08e000-0x000000009d095000) (0MB)
[ 0.000000] efi: mem74: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d095000-0x000000009d1f6000) (1MB)
[ 0.000000] efi: mem75: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009d1f6000-0x000000009d4ba000) (2MB)
[ 0.000000] efi: mem76: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d4ba000-0x000000009d4bf000) (0MB)
[ 0.000000] efi: mem77: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009d4bf000-0x000000009d4c3000) (0MB)
[ 0.000000] efi: mem78: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d4c3000-0x000000009d4d8000) (0MB)
[ 0.000000] efi: mem79: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009d4d8000-0x000000009d4ea000) (0MB)
[ 0.000000] efi: mem80: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d4ea000-0x000000009d4f5000) (0MB)
[ 0.000000] efi: mem81: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x000000009d4f5000-0x000000009d965000) (4MB)
[ 0.000000] efi: mem82: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009d965000-0x000000009d978000) (0MB)
[ 0.000000] efi: mem83: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009d978000-0x000000009d97c000) (0MB)
[ 0.000000] efi: mem84: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009d97c000-0x000000009d97d000) (0MB)
[ 0.000000] efi: mem85: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009d97d000-0x000000009d982000) (0MB)
[ 0.000000] efi: mem86: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009d982000-0x000000009d983000) (0MB)
[ 0.000000] efi: mem87: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000009d983000-0x000000009d987000) (0MB)
[ 0.000000] efi: mem88: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009d987000-0x00000000a4a2a000) (112MB)
[ 0.000000] efi: mem89: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a2a000-0x00000000a4a2d000) (0MB)
[ 0.000000] efi: mem90: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a2d000-0x00000000a4a2e000) (0MB)
[ 0.000000] efi: mem91: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a2e000-0x00000000a4a30000) (0MB)
[ 0.000000] efi: mem92: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a30000-0x00000000a4a31000) (0MB)
[ 0.000000] efi: mem93: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a31000-0x00000000a4a32000) (0MB)
[ 0.000000] efi: mem94: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a32000-0x00000000a4a38000) (0MB)
[ 0.000000] efi: mem95: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a38000-0x00000000a4a39000) (0MB)
[ 0.000000] efi: mem96: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a39000-0x00000000a4a45000) (0MB)
[ 0.000000] efi: mem97: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a45000-0x00000000a4a46000) (0MB)
[ 0.000000] efi: mem98: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a46000-0x00000000a4a6a000) (0MB)
[ 0.000000] efi: mem99: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a6a000-0x00000000a4a6b000) (0MB)
[ 0.000000] efi: mem100: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a6b000-0x00000000a4a77000) (0MB)
[ 0.000000] efi: mem101: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a77000-0x00000000a4a78000) (0MB)
[ 0.000000] efi: mem102: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a78000-0x00000000a4a9c000) (0MB)
[ 0.000000] efi: mem103: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4a9c000-0x00000000a4a9d000) (0MB)
[ 0.000000] efi: mem104: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4a9d000-0x00000000a4aa9000) (0MB)
[ 0.000000] efi: mem105: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4aa9000-0x00000000a4aaa000) (0MB)
[ 0.000000] efi: mem106: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4aaa000-0x00000000a4b29000) (0MB)
[ 0.000000] efi: mem107: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4b29000-0x00000000a4b2a000) (0MB)
[ 0.000000] efi: mem108: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a4b2a000-0x00000000a4c4c000) (1MB)
[ 0.000000] efi: mem109: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a4c4c000-0x00000000a5238000) (5MB)
[ 0.000000] efi: mem110: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5238000-0x00000000a5239000) (0MB)
[ 0.000000] efi: mem111: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5239000-0x00000000a523b000) (0MB)
[ 0.000000] efi: mem112: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a523b000-0x00000000a523c000) (0MB)
[ 0.000000] efi: mem113: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a523c000-0x00000000a523d000) (0MB)
[ 0.000000] efi: mem114: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a523d000-0x00000000a524a000) (0MB)
[ 0.000000] efi: mem115: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a524a000-0x00000000a524d000) (0MB)
[ 0.000000] efi: mem116: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a524d000-0x00000000a524e000) (0MB)
[ 0.000000] efi: mem117: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a524e000-0x00000000a5250000) (0MB)
[ 0.000000] efi: mem118: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5250000-0x00000000a5289000) (0MB)
[ 0.000000] efi: mem119: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5289000-0x00000000a528a000) (0MB)
[ 0.000000] efi: mem120: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a528a000-0x00000000a52ef000) (0MB)
[ 0.000000] efi: mem121: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a52ef000-0x00000000a52f0000) (0MB)
[ 0.000000] efi: mem122: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a52f0000-0x00000000a5334000) (0MB)
[ 0.000000] efi: mem123: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5334000-0x00000000a593e000) (6MB)
[ 0.000000] efi: mem124: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a593e000-0x00000000a594b000) (0MB)
[ 0.000000] efi: mem125: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a594b000-0x00000000a594c000) (0MB)
[ 0.000000] efi: mem126: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a594c000-0x00000000a594d000) (0MB)
[ 0.000000] efi: mem127: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a594d000-0x00000000a595d000) (0MB)
[ 0.000000] efi: mem128: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a595d000-0x00000000a5b5c000) (1MB)
[ 0.000000] efi: mem129: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5b5c000-0x00000000a5b78000) (0MB)
[ 0.000000] efi: mem130: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5b78000-0x00000000a5c47000) (0MB)
[ 0.000000] efi: mem131: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5c47000-0x00000000a5c49000) (0MB)
[ 0.000000] efi: mem132: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5c49000-0x00000000a5c68000) (0MB)
[ 0.000000] efi: mem133: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5c68000-0x00000000a5c71000) (0MB)
[ 0.000000] efi: mem134: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a5c71000-0x00000000a5e1e000) (1MB)
[ 0.000000] efi: mem135: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a5e1e000-0x00000000a6149000) (3MB)
[ 0.000000] efi: mem136: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6149000-0x00000000a6168000) (0MB)
[ 0.000000] efi: mem137: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6168000-0x00000000a6263000) (0MB)
[ 0.000000] efi: mem138: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6263000-0x00000000a626c000) (0MB)
[ 0.000000] efi: mem139: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a626c000-0x00000000a65d6000) (3MB)
[ 0.000000] efi: mem140: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a65d6000-0x00000000a65d8000) (0MB)
[ 0.000000] efi: mem141: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a65d8000-0x00000000a6b1e000) (5MB)
[ 0.000000] efi: mem142: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6b1e000-0x00000000a6b20000) (0MB)
[ 0.000000] efi: mem143: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6b20000-0x00000000a6b26000) (0MB)
[ 0.000000] efi: mem144: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a6b26000-0x00000000a6b28000) (0MB)
[ 0.000000] efi: mem145: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a6b28000-0x00000000a711a000) (5MB)
[ 0.000000] efi: mem146: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a711a000-0x00000000a711c000) (0MB)
[ 0.000000] efi: mem147: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a711c000-0x00000000a853f000) (20MB)
[ 0.000000] efi: mem148: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a853f000-0x00000000a8547000) (0MB)
[ 0.000000] efi: mem149: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8547000-0x00000000a854e000) (0MB)
[ 0.000000] efi: mem150: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a854e000-0x00000000a8556000) (0MB)
[ 0.000000] efi: mem151: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8556000-0x00000000a855c000) (0MB)
[ 0.000000] efi: mem152: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a855c000-0x00000000a8564000) (0MB)
[ 0.000000] efi: mem153: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8564000-0x00000000a8568000) (0MB)
[ 0.000000] efi: mem154: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8568000-0x00000000a8570000) (0MB)
[ 0.000000] efi: mem155: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8570000-0x00000000a8578000) (0MB)
[ 0.000000] efi: mem156: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8578000-0x00000000a8586000) (0MB)
[ 0.000000] efi: mem157: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8586000-0x00000000a8592000) (0MB)
[ 0.000000] efi: mem158: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8592000-0x00000000a8597000) (0MB)
[ 0.000000] efi: mem159: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8597000-0x00000000a859c000) (0MB)
[ 0.000000] efi: mem160: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a859c000-0x00000000a85a3000) (0MB)
[ 0.000000] efi: mem161: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85a3000-0x00000000a85aa000) (0MB)
[ 0.000000] efi: mem162: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85aa000-0x00000000a85b1000) (0MB)
[ 0.000000] efi: mem163: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85b1000-0x00000000a85b5000) (0MB)
[ 0.000000] efi: mem164: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85b5000-0x00000000a85bd000) (0MB)
[ 0.000000] efi: mem165: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85bd000-0x00000000a85bf000) (0MB)
[ 0.000000] efi: mem166: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85bf000-0x00000000a85c3000) (0MB)
[ 0.000000] efi: mem167: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85c3000-0x00000000a85ca000) (0MB)
[ 0.000000] efi: mem168: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85ca000-0x00000000a85d2000) (0MB)
[ 0.000000] efi: mem169: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85d2000-0x00000000a85d9000) (0MB)
[ 0.000000] efi: mem170: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85d9000-0x00000000a85e4000) (0MB)
[ 0.000000] efi: mem171: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85e4000-0x00000000a85e9000) (0MB)
[ 0.000000] efi: mem172: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85e9000-0x00000000a85ee000) (0MB)
[ 0.000000] efi: mem173: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85ee000-0x00000000a85f6000) (0MB)
[ 0.000000] efi: mem174: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a85f6000-0x00000000a85fc000) (0MB)
[ 0.000000] efi: mem175: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a85fc000-0x00000000a8604000) (0MB)
[ 0.000000] efi: mem176: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8604000-0x00000000a8608000) (0MB)
[ 0.000000] efi: mem177: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8608000-0x00000000a860a000) (0MB)
[ 0.000000] efi: mem178: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a860a000-0x00000000a860d000) (0MB)
[ 0.000000] efi: mem179: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a860d000-0x00000000a8612000) (0MB)
[ 0.000000] efi: mem180: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8612000-0x00000000a861c000) (0MB)
[ 0.000000] efi: mem181: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a861c000-0x00000000a86f7000) (0MB)
[ 0.000000] efi: mem182: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a86f7000-0x00000000a86fb000) (0MB)
[ 0.000000] efi: mem183: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a86fb000-0x00000000a873e000) (0MB)
[ 0.000000] efi: mem184: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a873e000-0x00000000a8740000) (0MB)
[ 0.000000] efi: mem185: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8740000-0x00000000a879c000) (0MB)
[ 0.000000] efi: mem186: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a879c000-0x00000000a879e000) (0MB)
[ 0.000000] efi: mem187: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a879e000-0x00000000a87a0000) (0MB)
[ 0.000000] efi: mem188: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a87a0000-0x00000000a87a2000) (0MB)
[ 0.000000] efi: mem189: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a87a2000-0x00000000a880e000) (0MB)
[ 0.000000] efi: mem190: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a880e000-0x00000000a881e000) (0MB)
[ 0.000000] efi: mem191: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a881e000-0x00000000a8823000) (0MB)
[ 0.000000] efi: mem192: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8823000-0x00000000a8835000) (0MB)
[ 0.000000] efi: mem193: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8835000-0x00000000a883e000) (0MB)
[ 0.000000] efi: mem194: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a883e000-0x00000000a8841000) (0MB)
[ 0.000000] efi: mem195: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8841000-0x00000000a8842000) (0MB)
[ 0.000000] efi: mem196: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8842000-0x00000000a887e000) (0MB)
[ 0.000000] efi: mem197: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a887e000-0x00000000a8883000) (0MB)
[ 0.000000] efi: mem198: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8883000-0x00000000a8884000) (0MB)
[ 0.000000] efi: mem199: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8884000-0x00000000a88d6000) (0MB)
[ 0.000000] efi: mem200: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a88d6000-0x00000000a8926000) (0MB)
[ 0.000000] efi: mem201: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8926000-0x00000000a892a000) (0MB)
[ 0.000000] efi: mem202: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a892a000-0x00000000a8948000) (0MB)
[ 0.000000] efi: mem203: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8948000-0x00000000a89ef000) (0MB)
[ 0.000000] efi: mem204: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a89ef000-0x00000000a8a1a000) (0MB)
[ 0.000000] efi: mem205: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8a1a000-0x00000000a8bca000) (1MB)
[ 0.000000] efi: mem206: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8bca000-0x00000000a8bdc000) (0MB)
[ 0.000000] efi: mem207: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8bdc000-0x00000000a8be0000) (0MB)
[ 0.000000] efi: mem208: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8be0000-0x00000000a8be7000) (0MB)
[ 0.000000] efi: mem209: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8be7000-0x00000000a8bea000) (0MB)
[ 0.000000] efi: mem210: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8bea000-0x00000000a8bfc000) (0MB)
[ 0.000000] efi: mem211: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8bfc000-0x00000000a8d7f000) (1MB)
[ 0.000000] efi: mem212: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8d7f000-0x00000000a8daa000) (0MB)
[ 0.000000] efi: mem213: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8daa000-0x00000000a8dc5000) (0MB)
[ 0.000000] efi: mem214: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8dc5000-0x00000000a8dd0000) (0MB)
[ 0.000000] efi: mem215: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8dd0000-0x00000000a8dfd000) (0MB)
[ 0.000000] efi: mem216: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8dfd000-0x00000000a8dfe000) (0MB)
[ 0.000000] efi: mem217: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8dfe000-0x00000000a8dff000) (0MB)
[ 0.000000] efi: mem218: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a8dff000-0x00000000a8e08000) (0MB)
[ 0.000000] efi: mem219: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a8e08000-0x00000000a90d8000) (2MB)
[ 0.000000] efi: mem220: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a90d8000-0x00000000a90d9000) (0MB)
[ 0.000000] efi: mem221: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a90d9000-0x00000000a94f9000) (4MB)
[ 0.000000] efi: mem222: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000a94f9000-0x00000000a94fb000) (0MB)
[ 0.000000] efi: mem223: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000a94fb000-0x00000000aa9e9000) (20MB)
[ 0.000000] efi: mem224: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aa9e9000-0x00000000aa9eb000) (0MB)
[ 0.000000] efi: mem225: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aa9eb000-0x00000000adb6d000) (49MB)
[ 0.000000] efi: mem226: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000adb6d000-0x00000000adb6f000) (0MB)
[ 0.000000] efi: mem227: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000adb6f000-0x00000000ae74b000) (11MB)
[ 0.000000] efi: mem228: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae74b000-0x00000000ae74d000) (0MB)
[ 0.000000] efi: mem229: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae74d000-0x00000000ae752000) (0MB)
[ 0.000000] efi: mem230: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae752000-0x00000000ae754000) (0MB)
[ 0.000000] efi: mem231: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae754000-0x00000000ae86e000) (1MB)
[ 0.000000] efi: mem232: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae86e000-0x00000000ae872000) (0MB)
[ 0.000000] efi: mem233: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae872000-0x00000000ae878000) (0MB)
[ 0.000000] efi: mem234: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000ae878000-0x00000000ae87a000) (0MB)
[ 0.000000] efi: mem235: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000ae87a000-0x00000000aeafa000) (2MB)
[ 0.000000] efi: mem236: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aeafa000-0x00000000aeafc000) (0MB)
[ 0.000000] efi: mem237: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aeafc000-0x00000000aeb16000) (0MB)
[ 0.000000] efi: mem238: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aeb16000-0x00000000aeb18000) (0MB)
[ 0.000000] efi: mem239: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aeb18000-0x00000000af538000) (10MB)
[ 0.000000] efi: mem240: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af538000-0x00000000af564000) (0MB)
[ 0.000000] efi: mem241: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af564000-0x00000000af5fe000) (0MB)
[ 0.000000] efi: mem242: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af5fe000-0x00000000af64e000) (0MB)
[ 0.000000] efi: mem243: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af64e000-0x00000000af7a2000) (1MB)
[ 0.000000] efi: mem244: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af7a2000-0x00000000af7aa000) (0MB)
[ 0.000000] efi: mem245: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af7aa000-0x00000000af86e000) (0MB)
[ 0.000000] efi: mem246: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000af86e000-0x00000000af892000) (0MB)
[ 0.000000] efi: mem247: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000af892000-0x00000000afa7e000) (1MB)
[ 0.000000] efi: mem248: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afa7e000-0x00000000afaa1000) (0MB)
[ 0.000000] efi: mem249: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afaa1000-0x00000000afae3000) (0MB)
[ 0.000000] efi: mem250: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afae3000-0x00000000afb00000) (0MB)
[ 0.000000] efi: mem251: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afb00000-0x00000000afea4000) (3MB)
[ 0.000000] efi: mem252: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000afea4000-0x00000000afebc000) (0MB)
[ 0.000000] efi: mem253: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000afebc000-0x00000000aff04000) (0MB)
[ 0.000000] efi: mem254: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000aff04000-0x00000000aff0e000) (0MB)
[ 0.000000] efi: mem255: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000aff0e000-0x00000000b00a3000) (1MB)
[ 0.000000] efi: mem256: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b00a3000-0x00000000b00a9000) (0MB)
[ 0.000000] efi: mem257: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b00a9000-0x00000000b0123000) (0MB)
[ 0.000000] efi: mem258: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0123000-0x00000000b012a000) (0MB)
[ 0.000000] efi: mem259: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b012a000-0x00000000b0176000) (0MB)
[ 0.000000] efi: mem260: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0176000-0x00000000b0199000) (0MB)
[ 0.000000] efi: mem261: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0199000-0x00000000b02b6000) (1MB)
[ 0.000000] efi: mem262: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b02b6000-0x00000000b02e3000) (0MB)
[ 0.000000] efi: mem263: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b02e3000-0x00000000b0426000) (1MB)
[ 0.000000] efi: mem264: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0426000-0x00000000b0443000) (0MB)
[ 0.000000] efi: mem265: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0443000-0x00000000b0645000) (2MB)
[ 0.000000] efi: mem266: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0645000-0x00000000b0662000) (0MB)
[ 0.000000] efi: mem267: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0662000-0x00000000b07a0000) (1MB)
[ 0.000000] efi: mem268: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b07a0000-0x00000000b07a6000) (0MB)
[ 0.000000] efi: mem269: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b07a6000-0x00000000b08d9000) (1MB)
[ 0.000000] efi: mem270: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b08d9000-0x00000000b08e4000) (0MB)
[ 0.000000] efi: mem271: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b08e4000-0x00000000b0a30000) (1MB)
[ 0.000000] efi: mem272: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0a30000-0x00000000b0a3e000) (0MB)
[ 0.000000] efi: mem273: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0a3e000-0x00000000b0a91000) (0MB)
[ 0.000000] efi: mem274: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0a91000-0x00000000b0a94000) (0MB)
[ 0.000000] efi: mem275: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0a94000-0x00000000b0bf3000) (1MB)
[ 0.000000] efi: mem276: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0bf3000-0x00000000b0bf7000) (0MB)
[ 0.000000] efi: mem277: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0bf7000-0x00000000b0c55000) (0MB)
[ 0.000000] efi: mem278: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0c55000-0x00000000b0c56000) (0MB)
[ 0.000000] efi: mem279: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0c56000-0x00000000b0d46000) (0MB)
[ 0.000000] efi: mem280: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0d46000-0x00000000b0d50000) (0MB)
[ 0.000000] efi: mem281: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0d50000-0x00000000b0da2000) (0MB)
[ 0.000000] efi: mem282: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0da2000-0x00000000b0daf000) (0MB)
[ 0.000000] efi: mem283: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0daf000-0x00000000b0dd7000) (0MB)
[ 0.000000] efi: mem284: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0dd7000-0x00000000b0ddf000) (0MB)
[ 0.000000] efi: mem285: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0ddf000-0x00000000b0de4000) (0MB)
[ 0.000000] efi: mem286: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0de4000-0x00000000b0de8000) (0MB)
[ 0.000000] efi: mem287: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0de8000-0x00000000b0ea0000) (0MB)
[ 0.000000] efi: mem288: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0ea0000-0x00000000b0ea5000) (0MB)
[ 0.000000] efi: mem289: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0ea5000-0x00000000b0f50000) (0MB)
[ 0.000000] efi: mem290: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0f50000-0x00000000b0f56000) (0MB)
[ 0.000000] efi: mem291: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0f56000-0x00000000b0f91000) (0MB)
[ 0.000000] efi: mem292: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0f91000-0x00000000b0f9e000) (0MB)
[ 0.000000] efi: mem293: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0f9e000-0x00000000b0fd1000) (0MB)
[ 0.000000] efi: mem294: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b0fd1000-0x00000000b0fde000) (0MB)
[ 0.000000] efi: mem295: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b0fde000-0x00000000b1080000) (0MB)
[ 0.000000] efi: mem296: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1080000-0x00000000b1087000) (0MB)
[ 0.000000] efi: mem297: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1087000-0x00000000b1146000) (0MB)
[ 0.000000] efi: mem298: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1146000-0x00000000b1154000) (0MB)
[ 0.000000] efi: mem299: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1154000-0x00000000b116f000) (0MB)
[ 0.000000] efi: mem300: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b116f000-0x00000000b1176000) (0MB)
[ 0.000000] efi: mem301: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1176000-0x00000000b11a5000) (0MB)
[ 0.000000] efi: mem302: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b11a5000-0x00000000b11ab000) (0MB)
[ 0.000000] efi: mem303: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b11ab000-0x00000000b1231000) (0MB)
[ 0.000000] efi: mem304: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1231000-0x00000000b1236000) (0MB)
[ 0.000000] efi: mem305: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1236000-0x00000000b1271000) (0MB)
[ 0.000000] efi: mem306: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1271000-0x00000000b127e000) (0MB)
[ 0.000000] efi: mem307: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b127e000-0x00000000b1304000) (0MB)
[ 0.000000] efi: mem308: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1304000-0x00000000b1308000) (0MB)
[ 0.000000] efi: mem309: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1308000-0x00000000b142c000) (1MB)
[ 0.000000] efi: mem310: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b142c000-0x00000000b142f000) (0MB)
[ 0.000000] efi: mem311: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b142f000-0x00000000b151c000) (0MB)
[ 0.000000] efi: mem312: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b151c000-0x00000000b1525000) (0MB)
[ 0.000000] efi: mem313: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1525000-0x00000000b153c000) (0MB)
[ 0.000000] efi: mem314: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b153c000-0x00000000b1544000) (0MB)
[ 0.000000] efi: mem315: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1544000-0x00000000b155b000) (0MB)
[ 0.000000] efi: mem316: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b155b000-0x00000000b1560000) (0MB)
[ 0.000000] efi: mem317: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1560000-0x00000000b198d000) (4MB)
[ 0.000000] efi: mem318: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b198d000-0x00000000b1999000) (0MB)
[ 0.000000] efi: mem319: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1999000-0x00000000b19a2000) (0MB)
[ 0.000000] efi: mem320: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b19a2000-0x00000000b19a5000) (0MB)
[ 0.000000] efi: mem321: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b19a5000-0x00000000b19a8000) (0MB)
[ 0.000000] efi: mem322: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b19a8000-0x00000000b19a9000) (0MB)
[ 0.000000] efi: mem323: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b19a9000-0x00000000b19fa000) (0MB)
[ 0.000000] efi: mem324: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b19fa000-0x00000000b19fb000) (0MB)
[ 0.000000] efi: mem325: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b19fb000-0x00000000b1a37000) (0MB)
[ 0.000000] efi: mem326: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1a37000-0x00000000b1a38000) (0MB)
[ 0.000000] efi: mem327: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1a38000-0x00000000b1aa1000) (0MB)
[ 0.000000] efi: mem328: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1aa1000-0x00000000b1aad000) (0MB)
[ 0.000000] efi: mem329: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1aad000-0x00000000b1acd000) (0MB)
[ 0.000000] efi: mem330: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1acd000-0x00000000b1ace000) (0MB)
[ 0.000000] efi: mem331: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1ace000-0x00000000b1af3000) (0MB)
[ 0.000000] efi: mem332: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000b1af3000-0x00000000b1af4000) (0MB)
[ 0.000000] efi: mem333: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000b1af4000-0x00000000bb91e000) (158MB)
[ 0.000000] efi: mem334: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bb91e000-0x00000000bb920000) (0MB)
[ 0.000000] efi: mem335: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000bb920000-0x00000000bcf8f000) (22MB)
[ 0.000000] efi: mem336: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bcf8f000-0x00000000bd052000) (0MB)
[ 0.000000] efi: mem337: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x00000000bd052000-0x00000000bd061000) (0MB)
[ 0.000000] efi: mem338: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000bd061000-0x00000000bd92c000) (8MB)
[ 0.000000] efi: mem339: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bd92c000-0x00000000bd9df000) (0MB)
[ 0.000000] efi: mem340: [Reserved | | | | | |WB|WT|WC|UC] range=[0x00000000bd9df000-0x00000000bdc98000) (2MB)
[ 0.000000] efi: mem341: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bdc98000-0x00000000bdc9e000) (0MB)
[ 0.000000] efi: mem342: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x00000000bdc9e000-0x00000000bdcb6000) (0MB)
[ 0.000000] efi: mem343: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bdcb6000-0x00000000bddbe000) (1MB)
[ 0.000000] efi: mem344: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x00000000bddbe000-0x00000000be1df000) (4MB)
[ 0.000000] efi: mem345: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be1df000-0x00000000be538000) (3MB)
[ 0.000000] efi: mem346: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000be538000-0x00000000bee39000) (9MB)
[ 0.000000] efi: mem347: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bee39000-0x00000000bee3b000) (0MB)
[ 0.000000] efi: mem348: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bee3b000-0x00000000beeb1000) (0MB)
[ 0.000000] efi: mem349: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beeb1000-0x00000000beeb4000) (0MB)
[ 0.000000] efi: mem350: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000beeb4000-0x00000000bef52000) (0MB)
[ 0.000000] efi: mem351: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bef52000-0x00000000bef74000) (0MB)
[ 0.000000] efi: mem352: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000bef74000-0x00000000befff000) (0MB)
[ 0.000000] efi: mem353: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000befff000-0x00000000bf000000) (0MB)
[ 0.000000] efi: mem354: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000083f000000) (29680MB)
[ 0.000000] efi: mem355: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem356: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem357: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem358: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem359: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem360: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: ASUS All Series/Z97-PRO, BIOS 2012 09/30/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x83f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DBFFF write-protect
[ 0.000000] DC000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7800000000 write-back
[ 0.000000] 1 base 0800000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0820000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 0830000000 mask 7FF8000000 write-back
[ 0.000000] 4 base 0838000000 mask 7FFC000000 write-back
[ 0.000000] 5 base 083C000000 mask 7FFE000000 write-back
[ 0.000000] 6 base 083E000000 mask 7FFF000000 write-back
[ 0.000000] 7 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd8d0-0x000fd8df] mapped at [ffff8800000fd8d0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000089000] 89000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x83ee00000-0x83effffff]
[ 0.000000] [mem 0x83ee00000-0x83effffff] page 2M
[ 0.000000] BRK [0x01b35000, 0x01b35fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x820000000-0x83edfffff]
[ 0.000000] [mem 0x820000000-0x83edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x800000000-0x81fffffff]
[ 0.000000] [mem 0x800000000-0x81fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x9d08dfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x9cffffff] page 2M
[ 0.000000] [mem 0x9d000000-0x9d08dfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x9d095000-0x9d4f4fff]
[ 0.000000] [mem 0x9d095000-0x9d1fffff] page 4k
[ 0.000000] [mem 0x9d200000-0x9d3fffff] page 2M
[ 0.000000] [mem 0x9d400000-0x9d4f4fff] page 4k
[ 0.000000] BRK [0x01b36000, 0x01b36fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x9d965000-0xbd92bfff]
[ 0.000000] [mem 0x9d965000-0x9d9fffff] page 4k
[ 0.000000] [mem 0x9da00000-0xbd7fffff] page 2M
[ 0.000000] [mem 0xbd800000-0xbd92bfff] page 4k
[ 0.000000] BRK [0x01b37000, 0x01b37fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbefff000-0xbeffffff]
[ 0.000000] [mem 0xbefff000-0xbeffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x7ffffffff]
[ 0.000000] [mem 0x100000000-0x7ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3795c000-0x37ca5fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000BDC9E000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000BDC9E080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BDCAD510 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BDC9E198 00F372 (v02 ALASKA A M I 00000011 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000BE1DEF80 000040
[ 0.000000] ACPI: APIC 0x00000000BDCAD620 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000BDCAD6B8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BDCAD700 000C7D (v01 Ther_R Ther_Rvp 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000BDCAE380 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000BDCAE8C0 000B74 (v01 CpuRef CpuSsdt 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000BDCAF438 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000BDCAF478 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000BDCAF4B0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000BDCAF820 005977 (v01 SaSsdt SaSsdt 00003000 INTL 20120711)
[ 0.000000] ACPI: BGRT 0x00000000BDCB51F0 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000083effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x83eff8000-0x83effbfff]
[ 0.000000] [ffffea0000000000-ffffea0020ffffff] PMD -> [ffff88081e600000-ffff88083e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x83effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x9d08dfff]
[ 0.000000] node 0: [mem 0x9d095000-0x9d4f4fff]
[ 0.000000] node 0: [mem 0x9d965000-0xbd92bfff]
[ 0.000000] node 0: [mem 0xbefff000-0xbeffffff]
[ 0.000000] node 0: [mem 0x100000000-0x83effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x83effffff]
[ 0.000000] On node 0 totalpages: 8373331
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 59 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12051 pages used for memmap
[ 0.000000] DMA32 zone: 771254 pages, LIFO batch:31
[ 0.000000] Normal zone: 118720 pages used for memmap
[ 0.000000] Normal zone: 7598080 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d08e000-0x9d094fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d4f5000-0x9d964fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbd92c000-0xbdc97fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdc98000-0xbdcb5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbdcb6000-0xbe1defff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbe1df000-0xbef51fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbef52000-0xbeffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xbf000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88083ec00000 s86336 r8192 d32448 u262144
[ 0.000000] pcpu-alloc: s86336 r8192 d32448 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 8242437
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=d00bbf3b-182d-4b7f-9502-23eff99f42e5 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 32486996K/33493324K available (5534K kernel code, 917K rwdata, 1744K rodata, 1164K init, 1156K bss, 1006328K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4000.001 MHz processor
[ 0.000017] Calibrating delay loop (skipped), value calculated using timer frequency.. 8003.33 BogoMIPS (lpj=13333336)
[ 0.000019] pid_max: default: 32768 minimum: 301
[ 0.000022] ACPI: Core revision 20141107
[ 0.009229] ACPI: All ACPI Tables successfully acquired
[ 0.029785] Security Framework initialized
[ 0.029788] Yama: becoming mindful.
[ 0.030858] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.034247] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.035692] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.035711] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.035889] Initializing cgroup subsys memory
[ 0.035892] Initializing cgroup subsys devices
[ 0.035893] Initializing cgroup subsys freezer
[ 0.035894] Initializing cgroup subsys net_cls
[ 0.035895] Initializing cgroup subsys blkio
[ 0.035908] CPU: Physical Processor ID: 0
[ 0.035909] CPU: Processor Core ID: 0
[ 0.035911] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.036595] mce: CPU supports 9 MCE banks
[ 0.036604] CPU0: Thermal monitoring enabled (TM1)
[ 0.036611] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.036664] Freeing SMP alternatives memory: 20K (ffffffff81a0a000 - ffffffff81a0f000)
[ 0.037117] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.043080] ftrace: allocating 21171 entries in 83 pages
[ 0.048407] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.081410] smpboot: CPU0: Intel(R) Core(TM) i7-4790K CPU @ 4.00GHz (fam: 06, model: 3c, stepping: 03)
[ 0.081414] TSC deadline timer enabled
[ 0.081426] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.081437] ... version: 3
[ 0.081437] ... bit width: 48
[ 0.081438] ... generic registers: 4
[ 0.081438] ... value mask: 0000ffffffffffff
[ 0.081439] ... max period: 0000ffffffffffff
[ 0.081439] ... fixed-purpose events: 3
[ 0.081440] ... event mask: 000000070000000f
[ 0.101445] x86: Booting SMP configuration:
[ 0.101446] .... node #0, CPUs: #1
[ 0.115404] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.122053] #2 #3 #4 #5 #6 #7
[ 0.238414] x86: Booted up 1 node, 8 CPUs
[ 0.238416] smpboot: Total of 8 processors activated (64025.68 BogoMIPS)
[ 0.243980] devtmpfs: initialized
[ 0.246376] PM: Registering ACPI NVS region [mem 0x9d08e000-0x9d094fff] (28672 bytes)
[ 0.246377] PM: Registering ACPI NVS region [mem 0xbdcb6000-0xbe1defff] (5410816 bytes)
[ 0.246503] pinctrl core: initialized pinctrl subsystem
[ 0.246530] RTC time: 13:27:06, date: 04/16/15
[ 0.246592] NET: Registered protocol family 16
[ 0.257198] cpuidle: using governor ladder
[ 0.270535] cpuidle: using governor menu
[ 0.270549] ACPI: bus type PCI registered
[ 0.270550] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270588] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270589] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.270757] PCI: Using configuration type 1 for base access
[ 0.284059] ACPI: Added _OSI(Module Device)
[ 0.284060] ACPI: Added _OSI(Processor Device)
[ 0.284060] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.284061] ACPI: AddHey, I ran into a similar error (not bgrt invalid status, but a gnome shell segfault) after updating recently and I'm using the proprietary drivers. I think I may have had multiple issues. I'm not sure if any of this advice will prove useful, but some combination of these worked for me:
* Stop gdm with systemctl (use ctrl alt f2 or another tty), uncomment WaylandEnable=false in /etc/gdm/custom.conf and try restarting gdm
* If that doesn't work, disable gdm and install another login manager (I used sddm)
* If that still doesn't work and you have the infinality font packages for freetype, fontconfig, and cairo, replace them with the default packages and try starting your login manager again
Last edited by canurabus (2015-04-17 18:36:59) -
Fresh install of 11.1 and "sqlplus user@instance/password" does not work
new server, windows server 2008, fresh install of 11.1.0.7 with local instance.
can connect to the instance using "sqlplus user/password" since ORACLE_SID is set,
can connect to a 9.2 remote instance using "sqlplus user@remoteinstance/password".
can't connect using "sqlplus user@localinstance/password".
<command>
l:path>set oracle_sid=localinstance
l:path>sqlplus username/password
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Nov 8 13:11:02 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.1.0.7.0 - Production
SQL> exit
Disconnected from Oracle Database 11g Release 11.1.0.7.0 - Production
l:\path>sqlplus username@localinstance/password
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Nov 8 13:11:21 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
l:\path>
l:\path>sqlplus username@remoteinstance/password
SQL*Plus: Release 11.1.0.7.0 - Production on Mon Nov 8 13:11:45 2010
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
SQL> exit
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
l:\path>
</command>
what am i doing wrong?
many thanks in advance,
stephen.=================================
A couple of important points.
First, the listener is a server side only process. It's entire purpose in life is to receive requests for connections to databases and set up those connections. Once the connection is established, the listener is out of the picture. It creates the connection. It doesn't sustain the connection. One listener, with the default name of LISTENER, running from one oracle home, listening on a single port, will serve multiple database instances of multiple versions running from multiple homes. It is an unnecessary complexity to try to have multiple listeners or to name the listener as if it belongs to a particular database. That would be like the telephone company building a separate switchboard for each customer.
Additional notes on the listener: One listener is capable of listening on multiple ports. But please notice that it is the listener using these ports, not the database instance. You can't bind a specific listener port to a specific db instance. Similarly, one listener is capable of listnening on multiple IP addresses (in the case of a server with multiple NICs) But just like the port, you can't bind a specific ip address to a specific db instance.
Second, the tnsnames.ora file is a client side issue. It's purpose is for address resolution - the tns equivalent of the 'hosts' file further down the network stack. The only reason it exists on a host machine is because that machine can also run client processes.
Assume you have the following in your tnsnames.ora:
larry =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = curley)
)Now, when you issue a connect, say like this:
$> sqlplus scott/tiger@larrytns will look in your tnsnames.ora for an entry called 'larry'. Next, tns sends a request to (PORT = 1521) on (HOST = myhost) using (PROTOCOL = TCP), asking for a connection to (SERVICE_NAME = curley).
Where is (HOST = myhost) on the network? When the request gets passed from tns to the next layer in the network stack, the name 'myhost' will get resolved to an IP address, either via a local 'hosts' file, via DNS, or possibly other less used mechanisms. You can also hard-code the ip address (HOST = 123.456.789.101) in the tnsnames.ora.
Next, the request arrives at port 1521 on myhost. Hopefully, there is a listener on myhost configured to listen on port 1521, and that listener knows about SERVICE_NAME = curley. If so, you'll be connected.
What can go wrong?
First, there may not be an entry for 'larry' in your tnsnames. In that case you get "ORA-12154: TNS:could not resolve the connect identifier specified" No need to go looking for a problem on the host, with the listener, etc. If you can't place a telephone call because you don't know the number (can't find your telephone directory (tnsnames.ora) or can't find the party you are looking for listed in it (no entry for larry)) you don't look for problems at the telephone switchboard.
Maybe the entry for larry was found, but myhost couldn't be resolved to an IP address (say there was no entry for myhost in the local hosts file). This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe there was an entry for myserver in the local hosts file, but it specified a bad IP address. This will result in "ORA-12545: Connect failed because target host or object does not exist"
Maybe the IP was good, but there is no listener running: "ORA-12541: TNS:no listener"
Maybe the IP was good, there is a listener at myhost, but it is listening on a different port. "ORA-12560: TNS:protocol adapter error"
Maybe the IP was good, there is a listener at myhost, it is listening on the specified port, but doesn't know about SERVICE_NAME = curley. "ORA-12514: TNS:listener does not currently know of service requested in connect descriptor"
Third: If the client is on the same machine as the db instance, it is possible to connect without referencing tnsnames and without going through the listener.
Now, when you issue a connect, say like this:
$> sqlplus scott/tigertns will attempt to establish an IPC connection to the db instance. How does it know the name of the instance? It uses the current value of the enviornment variable ORACLE_SID. So...
$> export ORACLE_SID=fred
$> sqlplus scott/tigerIt will attempt to connect to the instance known as "fred". If there is no such instance, it will, of course, fail. Also, if there is no value set for ORACLE_SID, the connect will fail.
check executing instances to get the SID
[oracle@vmlnx01 ~]$ ps -ef|grep pmon|grep -v grep
oracle 4236 1 0 10:30 ? 00:00:00 ora_pmon_vlnxora1set ORACLE_SID appropriately, and connect
[oracle@vmlnx01 ~]$ export ORACLE_SID='vlnxora1
[oracle@vmlnx01 ~]$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 22 10:42:37 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing optionsNow set ORACLE_SID to a bogus value, and try to connect
SQL> exit
[oracle@vmlnx01 ~]$ export ORACLE_SID=FUBAR
[oracle@vmlnx01 ~]$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 22 10:42:57 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Enter user-name: Now set ORACLE_SID to null, and try to connect
[oracle@vmlnx01 ~]$ export ORACLE_SID=
[oracle@vmlnx01 ~]$ sqlplus /scott/tiger
SQL*Plus: Release 10.2.0.4.0 - Production on Wed Sep 22 10:43:24 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
ERROR:
ORA-12162: TNS:net service name is incorrectly specifiedOk, that is how we get from the client connection request to the listener. What about the listener's part of all this?
The listener is very simple. It's job is to listen for connection requests and make the connection (server process) between the client and the database instance. Once that connection is made, the listener is out of the picture. If you were to kill the listener, all existing connections would continue. The listener is configured with the listener.ora file, but if that file doesn't exist, the listener is quite capable of starting up with all default values. One common mistake with the listner configuration is to specify "HOST=localhost" or "HOST=127.0.01". This is a NONROUTABLE ip address. LOCALHOST and ip address 127.0.0.1 always mean "this machine on which I am sitting". So, all computers are known as "localhost" or "127.0.0.1". If you specify this address, the listener will only be capable of receiving requests from the machine on which it is running. If you specified that address in your tnsnames file - on a remote client machine - the request would be routed to the machine on which the requesting client resides. Probably not what you want.
===================================== -
I can seem to install my plugins (Nik and TK-Actions from PS cc to PS 2014 Help Please.
Need help to install nik software bundle and TK-Actions from Photoshop cc to Photoshop 2014. I have tried copying the folders from the Plugin in folder in cc to 2014 and they seem to have arrived but the extensions option is grayed out in the Windows menu of PS 2014. What should I try next? Thanks.
Been resolved.
-
Did a fresh install of Windows Vista and Premiere CS5 and now Premiere is buggy!
Hi everyone. I was using Premiere Pro CS5 on my quad core system editing AVCHD clips just fine and then I had to do a fresh install of Windows Vista Home Premium. I then did a fresh install of Premiere Pro CS5 on a separate hard drive and opened up one of my AVCHD projects. Now, for some reason, the same AVCHD projects that played fine before are now jittery and also show blocky artifacts. The jitter seems to be a constant jitter every second and the blocky artifacts seem to happen mostly when the subject in the clip is moving. I know the problem isn't in the original clip from my GH-1 camera because if I play the original clip that is on my hard drive, it plays just fine so, it has to be Premiere CS5 that is causing the clips to play all jerky on the timeline. Can someone please help me solve this problem? One more thing, when I reinstalled Premiere CS5, I installed the latest update from Adobe. I didn't have that update installed before when the clips played fine. Could that update be the culprit? Thanks.
My clips were recorded using a Panasonic GH1 HDSLR camera and are 1080/24p (progressive).
KarizmaAs far as I know, you thought wrong
My 3 hard drives are configured as...
1 - 320G WD Win7 and all programs
2 - 320G WD Win7 swap file and PPro projects
3 - 1T WD all video files... read and write -
Does a fresh install of Microsoft SQL 2012 Datacenter or Standard need any hotfix before installing?
Do I need to run any hotfix or pre requisites before doing a fresh install of Microsoft SQL 2012 Standard or Datacenter?
Please clarify because there's nothing stating this in the SQL requirements.
http://technet.microsoft.com/en-us/library/cc262485.aspx
Many thanks.It's always better if you use slipstream installation to avoid any known issues with setup itself.
Balmukund Lakhani
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
| Facebook
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle
Maybe you are looking for
-
Why is my 2007 iMac SO slow after installing Mavericks?
Prior to intstallition, the computer was running great - Adobe Creative Suite 5.5 (even Photoshop) was working well and there's only 2gb RAM on boad. Once installed, I'm amazed at how poor system performance is. I'm guessing it's optimized for newer
-
Java heap size error Work manager
Hi, We are working with Work Manager 6.0 running on SMP 2.3 SP03. The application was working fine, but after the data load that has happened in the UAT System, we are getting the below error: 2014/08/08 00:48:56.142: setImportParameters::STORAGE_R
-
Trouble with Content Server connection
I am having an issue with content server on Unix. I'm finished with content server install and need to connect my ABAP system to it via CSADMIN. But when I first enter CSAdmin, I give it my host and port. What is the unix http script name for the de
-
Cannot uninstall previous versions of iPod for Windows
Over a year ago, my roommate gave me his old iPod. I installed it and iTunes and it worked fine until the battery on the iPod died and everything went nuts with the iPod - iTunes worked fine. Now i have a new 30 gig video iPod, but I can't get anythi
-
Reusing deployable web service proxies
Hi , I am new to CE 7.1 and am wondering about reusing deployable web service proxies. In this link , it is written that "The Web service client and the Web service proxy must be in the same EAR and in the same module (EJB or Dynamic Web module)." ht