During OSD in WINPE the clients loses it's IP Address and fails

Hello,
Since 3 weeks we have an issue where the clients are releasing there IP address during OS Deployment, and mostly during downloading the .wim file or during the applying image. (If you try
for 4 or 5 times it sometime passes and will be successfully deployed)
The DHCP lease times are set to 24H. I ran a F8 and then i did a ping to the distribution server during the download / applying. What we see is that after and X moment (within 20min still
in WinPE) the NIC looses its IP address and gets a 169.x.x.x.x.x address.
If this happens during Applying Images (before its complete) and you manually do a ipconfig/release and /renew it successfully continues. If it happens during download it off course stops
instantly.
We tested it on several routers and different configurations. All with the same result a failing OSD. We ran SCCM2012 SP1. The WinPE has the latest NIC drivers.
Greetings

We almost solved the problem :) Indeed DHCP is the problem. Although the config of both DHCP servers is configured the same with a lease of 24h (deployment vlan) one of the DHCP servers is giving the clients a lease time of 10 minutes. When this lease time
expired the clients arent automatic renewing the lease and Deployment will fail.
DHCP config is renewed and coded with different lease time but still clients get 10min lease.
More on Monday :)

Similar Messages

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certif

Safari keeps dropping down this error message when ever i try to log on to any website safai can't verify the identity of the website ( e.g.. any address ) and the drop down has three choices to click on or else you can't go foward., they are check certificate ______ cancel ______ continue.... This thing is so annoying when trying to go somewhere i just want the error message to go away.

In your Keychain under 'login' delete the VeriSign certificates and then quit and restart all browsers/itunes/app store.
http://apple.stackexchange.com/questions/180570/invalid-certificate-after-securi ty-update-2015-004-in-mavericks

I purchased the Adobe Export pdf 10 hours ago and have not received the e-mail to confirm my address and password, then I can't use it!

I purchased the Adobe Export pdf 10 hours ago and have not received the e-mail to confirm my address and password, then I can't use it!
The e-mail address is correct and I've consulted the inbox and the trashbox without result. And I don't know how to contact the seller Adobe...

Hi Jose,
After checking your account, I see that you purchased an ExportPDF subscription back in June (under the same email address that you use here in the forums). There are no other subscriptions under that email address.
But, you should be able to log in to https://cloud.acrobat.com using this email address and your password. If not, please let us know.
Best,
Sara

Changed my email address, confirmed my password. The App Store still has old address and does not recognize my password.

Changed my email address, confirmed my password. The App Store has old email address and does not recognize the password?

Easy fix... it's a refresh issue. Sign out and back in with changed name.
iOS: Changing the signed-in iTunes Store account
http://support.apple.com/kb/HT1311

What happens to a NetConnection when the client loses network connectivity?

Hello,
I was wondering if anyone has any idea of what happens with a
NetConnection that is interrupted by the loss of network
connectivity. In recent testing on my FMS app, I logged in, messed
around for a while, then physically disconnected my computer's
ethernet cable. While the application stopped responding to my
actions (as expected), the instance on Flash Media Server continued
to show a client connection for several minutes after the
disconnect, although it did eventually time out. Before it timed
out, reconnecting the ethernet cable didn't allow the client to
interact with the application again, also pretty much expected.
What I'm wondering is if there is any way to register the
loss of connectivity by the client so that appropriate action could
be taken. It doesn't seem that any of the NetStatusEvents respond
to loss of connectivity...the closed event occurs only when
actively closing the connection, not when it's simply cut off. Has
anyone else had to deal with this, and what sort of approach did
you take?
Thanks in advance for any help.

When you close a process it wont use the port/network until it restarts automatically.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
This has nothing to do with my question. I'd like a detailed explanation of what the suspend function does,
and how this action affects the environment

I want to reserve a static IP address on my Airport extreme. What is the difference between reserving by MAC Address and DHCP Client ID?

I want to understand the differences in the way you can reserve a static address for a device on the network. I had previously set the device itself to an address and then reserved it with DHCP Client ID, which I thought was just the devices static addresss. I'm not sure if this was in fact correct or just happend to work. I know what a MAC address is, but I'm not really sure what the DHCP Client ID is. So it would be great if someone could clarify it, and the difference between reserving address by MAC Address or DHCP Client ID.

A MAC address is a unique identification consisting of letters and numbers in a form that looks like this:
xx:xx:xx:xx:xx:xx
Every network device has a MAC address, which can be found on a label on the bottom or back of the device. Apple calls this the Ethernet ID.
A DHCP Client ID is an optional name that you can assign to a device. For example, on your Mac....
Open System Preferences (gear icon on the dock)
Open Network
Click on Ethernet
Click Advanced at the lower right
You may be able to edit the DHCP Client ID here....for example.....you could enter MJ500's MacBook in the space provided. That would be the Client ID of your Mac.

The client is looking for trial balance and GL balance reports in Spanish

hi sap techis
I am facing a typical issue.the client is looking for trial balance report and GL balance report in Spanish language.the problem is if i change the language key from English to Spanish the entire language will be changed to Spanish is there any way by which without changing the language key in chart of accounts, we can obtain the reports in Spanish language.please help in taking out reports in Spanish from F.01 in Spanish
Edited by: akausar on Apr 16, 2010 12:42 AM

You have to translate all your financial statement version nodes from English to Spanish to be able to see Spanish texts in F.01. To translate, execute T Code SE63 and choose Translation -> ABAP Objects -> Other Long Texts from the menu. Then expand 'FI FI Balance Sheet/P&L Statement' and double-click on 'FIBS FI Balance Sheet/P&L Statement '. Then change the source language to EN and target language to ES (they are greyed out but you will still be able to pick them from the drop-down menu). Now put the cursor on Object Name field and press F4. You will see the financial statements you have created in OB58. It is a cumbersome task, but you have to drilldown to each node of your FSV and double-click on it and in the following screen you will see the English text on top. In the bottom part of the screen you have to enter the Spanish text.
Once you are done with translation, execute program RS_LXE_RECORD_TORDER and then push your translations into a transport request.

HT201320 I have a iPhone 5c. Wanting to set up an email account on the phone. After entering email address and password it sets up an imap account automatically, when I need to set up a pop3 account. What's happening?

Have just purchased an iPhone 5c and have been trying to set an email account on it. Under the menus I have gone in for an "Other". Having enetered the email address and password the phone automatically sets up an IMAP account and I need it to be a POP3 account - I am not being given the option. What is going wrong?

POP3 is considered obsolete. In this age of multiple mobile devices, computers, etc. POP3 creates more problems than it solves. IMAP allows for full synchronization of the entire mailbox and all folders with all client devices. If you read a message on one, it will be marked as read on all client devices. If you delete it or move it on one, the change will be reflected on all devices (and the server, of course). POP3 requires that the message store be managed manually on all devices and can sometimes prevent you from being able to retrieve the message on more than one device at all.

HT3477 I am attempting to set up a guest network. When I change the Network settings to DHCP NAT I get a message that tells me that the service has a private IP address and so I must connect using off bridge mode. In this mode I can not connect to the int

I am attempting to set up a guest network on the Airport Extreme Base Station. The Base Station is connected to a DSL Modem. The network is also extended using an Airport Express. When I have attempted to set up the Base Station using DHCP NAT in the netword feature I get a message that because the service has a private IP address the only way that I can connect is in Off Bridge Mode. In this mode I do not seem to be able to connect to the internet using the guest network. Any suggestions would be helpful.

Ok, your Speedport is actually a combination DSL modem and wireless router. In this case you would typically configure a downstream router, like your AirPort Extreme in Bridge mode. Unfortunately, when in Bridge mode, the AirPort does NOT support providing a guest network.
The only possible option is to reconfigure the Speedport as a bridge and use the Extreme as your Internet router. You would still need the DSL modem provided by the Speedport for Internet connectivity.

I need the steps to delete my email address and input my new email address

When I go on the web and want to send someone the web page or attached the website, or send from my printer/scan application, my email was set up to attach through Mail. I cannot figure out how to delete my current email that is attached and to set up my new email. Would anyone mind telling me the step by step instructions on how to go into the Mail application and delete present email address and input new email address.
Much appreciated!

You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(125083)

AX works (client Mode), but odd IP address and flashing orange light

Hi,
Today, possibly after a very brief power cut, my AX stopped working, then seemed OK after restarting my network. However, although I can play over Airtunes, the AX orange LED is continually flashing, and the AX has an odd (self-assigned?) IP address. I can't work this out.
I tried setting it up from scratch. Using the Airport Setup Assistant, tried to connect directly via Ethernet from my laptop (with Airport turned off). It asked me to switch on Airport, briefly found the AX, then refused to find it again.
So, I removed the Ethernet cable and tried using Airport Admin Utility wirelessly. I could connect to the AX as it started up from a hard reset, and I could set it up. However, although it still serves Airtunes, it still refuses to pick up a proper IP address (192.168....), instead having a 169.254... address. And the orange LED still flashes continuously.
I'm connecting to a closed network, using WPA Personal. AX version 6.3. Mac OS X 10.4.9.
The AX connects wirelessly to a LinkSys AP, which is in turn wired to an Airport Extreme BS, which is in turn wired (via a switch) to a LinkSys (wireless) router (long cable runs, thick walls, don't ask!). All has worked flawlessly for years. Still works, but looks like it shouldn't!
Any clues?

Hi. I'm actually having what seems to be the same problem, but after restarting and unplugging everything I can think of, the amber light is still flashing. Other than the light and the 69.47.... IP address (which I'll take your word for it being weird), the network appears to be working fine. Should I just ignore the light? We have three computers connected to it successfully right now, and I'd hate to disturb its mojo if the light isn't important.
Thanks!

I am about to lose my mind. Had screenplay all done. Went back in to tweak the cover page to include copyright, address and e-mail for submission to a contest. It was after that, that the pages shifted one whole page, so my Page 1 was blank. I tried t

Is there anyone with a clue out there, that can help me at all???

As the title of this post is a bit truncated, I am assuming that the issue here is the empty page just after the title page and you need to delete this page.
Workarounds could be:
- You can try deleting some empty lines in the page above it (the title page) to see if it removes this page
- as this page is an extension of title page, it can be removed through Production->Remove Title Page option. (please copy the contents of title page elsewhere before removing it)

Difference between the way of login with ip address and SAProuter when checkin original file

Hi, experts
We found out:
① Login with ip address, check in a file with file name less than 22 Chinese character, OK.
② Login with ip address, check in a file with file name more than 22 Chinese character, error message 26253 appeares: Error while checking in and storing: &
③ Login with SAProuter, check in a file with file name more than 22 Chinese character, OK.
What casues error in condition ②? The only difference between ② and ③ is the way of logining to SAP system.
Best Regards
Yemi

Hi Yemi,
based on your description I would kindly ask you to check the application log transaction SLG1 after getting the error message with your userID. Here normally further background information is listed that might help to get a hint what is going wrong.
Best regards,
Christoph

HP LaserJet P1505n Printer frequently loses assigned static IP address and goes offiline

We have replaced printer several times, assigned printer static ip to eliminate network related issues. Ran, Scan Doctor;
- reinstalled printer drivers
- power cyled printer
- check for network connectivity
- Printer works perfectly ( for a brief period of time.)
What's mind boggling, ( if I may) is that IPv4 service was turned off when printer went offline. Logical right? Turned it back and it works for a while and goes offline again. Boggie man stops by that printer to turn-off network connections repeatedly. This is frustrating and makes my department look bad. May be we should try a different brand of printer. Any suggestions will be greatly appreciated.

Hi gr---8 ,
Sorry to hear you are still having issues setting up the printer on the wired network.
We will need to find out if it is the Ethernet port on the printer, or the network causing this issue.
Do you have Mac filtering on the router?
Disconnect the Ethernet cable from the printer.
Restore the printer back to factory settings.
Print a hardware test page to test the printer's hardware. Make sure the SSID and IP address is cleared from your router's setttings. Printing a Configuration Page in Windows.
Connect the Ethernet cable directly to the computer.
Print the configuration page again to see if you get a IP address to test the Ethernet port on the printer.
What is the IP address?
Run the add printer wizard to install the printer.
Test the printer.
Were you able to see the printer, add the printer and print?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Please provide in detail the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

When opening DOCX files the filename is appended with .DOC extension and fail to open in Word

When trying to open DOCX files Firefox appends a ".DOC" to the end of them and then Word fails to open them saying "Word cannot start the converter mswrd632.wpc" (using Office 2003 with the Office 2007 Compatibility Pack) - however if I SAVE the file first it saves fine as a DOCX and opens fine in Word.
Any ideas please?

What's happening here is that Firefox sees the mime type for the application (application/msword) and identifies it as a Word document. However, FF doesn't recognize the new(ish) docx extentions, and appends the .doc .
Now, when FF hands the file off to Word for Word to open, Word only looks at the extension (.doc) and tries to open the file as if it were of the older format.
I don't experience this problem myself with the default settings after installation, I'm going to assume that something's been tweaked in your FF installation. I would recommend checking your settings in Tools > Options > Applications

During OSD in WINPE the clients loses it's IP Address and fails

Similar Messages

Maybe you are looking for