During Postgresql configuration initdb freezes on solaris 10 x86

Hi,
Ive installed Solaris 10 10/08 x86 in a VMware environment. The install went successfully, but when I tried to configure postgresql 8.2 to run the OS freezes when I run initdb.
I followed the instructions from the man pages, created all the environment variables and configured all the necessary permissions. Below is the output when I run initdb in debug mode.
initdb -d
Running in debug mode.
VERSION=8.2.9
PGDATA=/var/postgres/8.1/data
share_path=/usr/postgres/8.2/share
PGPATH=/usr/postgres/8.2/bin
POSTGRES_SUPERUSERNAME=postgres
POSTGRES_BKI=/usr/postgres/8.2/share/postgres.bki
POSTGRES_DESCR=/usr/postgres/8.2/share/postgres.description
POSTGRES_SHDESCR=/usr/postgres/8.2/share/postgres.shdescription
POSTGRESQL_CONF_SAMPLE=/usr/postgres/8.2/share/postgresql.conf.sample
PG_HBA_SAMPLE=/usr/postgres/8.2/share/pg_hba.conf.sample
PG_IDENT_SAMPLE=/usr/postgres/8.2/share/pg_ident.conf.sample
The files belonging to this database system will be owned by user "postgres".
This user must also own the server process.
The database cluster will be initialized with locale C.
creating directory /var/postgres/8.1/data ... ok
creating subdirectories ... ok
selecting default max_connections ...
It always run to the selecting default max_connections ... line and locks up the OS. I cant do anything after that. I have to restart the VM. Has anyone experience this issue before? Any help would be greatly appreciated.

Hi,
Based on feedback from another site, and some more research it seems that this is a bug. You can view more information at http://bugs.opensolaris.org/view_bug.do?bug_id=6579274. It looks like this bug has been resolve and will be in the next Solaris update. I'm not sure if it was fixed in the current patch set, as I don't have a support account. From the patch report (http://sunsolve.sun.com/patchRedirnew.do?type=report&item=10_x86_patch_report), it seems that the related bug, 6529185, was fixed.
So, if you have a support account then you can download the latest patches and see if it was patched. I wanted to try Solaris 10 out before purchasing a support account, so I've resolved to use a release earlier than 10/08. I hope this helps
Regards

Similar Messages

ZFS Configuration Question - Also posted in Solaris x86

Hello,
I have 2 x 140GB (hw Raid-0 + spare). About 20GB is allocated to Solaris on UFS (standard installation and partitions/slices).
I would like to allocate the 120GB left on the disk drive to ZFS. That space is not unallocated to any file system for now.
I found a lot of documentation of how to create a ZFS Pool on an empty disk drive. The documentation is less clear on how to do it on a drive already use by another FS.
Any help will be appreciated.
Michel

Darren,
I just setup another Solaris x86 server tonight to play with. That future production server is in it's own vlan wtih no Internet access for now.
The test server has the same configuration, but less disk space.
Here is the output of prtvtoc
# prtvtoc /dev/dsk/c0t0d0s0
* /dev/dsk/c0t0d0s0 partition map
* Dimensions:
* 512 bytes/sector
* 63 sectors/track
* 255 tracks/cylinder
* 16065 sectors/cylinder
* 2350 cylinders
* 2348 accessible cylinders
* Flags:
* 1: unmountable
* 10: read-only
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 10522575 27198045 37720619 /
1 3 01 16065 8401995 8418059
2 5 00 0 37720620 37720619
7 8 00 8418060 2104515 10522574 /export/home
8 1 01 0 16065 16064
Output of format
selecting c0t0d0
[disk formatted]
Warning: Current Disk has mounted partitions.
/dev/dsk/c0t0d0s0 is currently mounted on /. Please see umount(1M).
Total disk size is 8920 cylinders
Cylinder size is 16065 (512 byte) blocks
Cylinders
Partition Status Type Start End Length %
====== ====== ============ ===== === ====== ===
1 Active Solaris2 1 2350 2350 26
As you can see, the 1st partition is used at 26%. With fdisk, I can create a 2nd partition. My problem is to get that 2nd partiition availlable to Solaris and create a zpool in that unused space..
Michel

How about gccfss for Solaris x86/x64 platforms?

Subject says it all... it could make compiling a lot of code out there a whole lot easier!
Bob

I also desire gccfss for Solaris x86/x64 platforms .
In the interim I have downloaded the source and am attempting to create such a beast.
It is slow progress to fix the unexpected script breakage, but it seems to be going OK:
Problems:
1.): Issues like "-mtune=v9" and an "embeded spec" in gcc and cpp (from files
gccfss_src/build/gcc/gccspec.o and gccfss_src/build/gcc/cppspec.o).
2.): Use of OPTTABLE_H = $(srcdir)/config/target-option-table.h with SPARC specific
options throughout
EG:
#ifdef CROSS_COMPILE
#define NATIVE \
{ "-native", "-xtarget=generic" }, \
{ "-xarch=native64", "-Zarch=v9 -Zarchm64=v9 -Zm=64" },\
{ "-xarch=native", "-Zarch=v8plus -Zarchm32=v8plus -Zarchm64=v9 -Zm=32" },\
{ "-xtarget=native64", "-Zarch=generic -Zarchm32=generic -Zarchm64=v9 -xchip=generic -xcache=generic -Zm=64"}, \
{ "-xtarget=native", "-Zarch=generic -Zarchm32=generic -Zarchm64=v9 -xchip=generic -xcache=generic -Zm=32"}
#else
#define NATIVE \
{ "-native", "-xtarget=native" }, \
{ "-xarch=native64", "-xarch=native64 -Zm=64"}, \
{ "-xarch=native", "-xarch=native -Zm=32"}, \
{ "-xtarget=native64", "-xtarget=native64 -Zm=64"}, \
{ "-xtarget=native", "-xtarget=native -Zm=32"}
#endif
Thus, one would need to change:
{ "-xarch=native64", "-Zarch=v9 -Zarchm64=v9 -Zm=64" },\
to something like:
{ "-xarch=native64", "-xarch=386 -m64" },\
3.): Copy the "sparc_output_scratch_registers()" function from file
"gccfss_src/src/gcc/config/sparc/sparc.c" to "gccfss_src/src/gcc/tree-ir.c".
4.): Use the undocumented command line option "-frtl-backend" when this error
occurs during the build (a simple Makefile change):
`-mcpu=' is deprecated. Use `-mtune=' or '-march=' instead.
xgcc: SUNW0scgfss 4.2.0 has not been installed. Either install it or use -frtl-backend.
5.): More ...
All these issues occur because the scripts expect "--build=sparc-pc-solaris2.11" but
I configured using "--build=i386-pc-solaris2.11" . It seems like it is going to work
but I am yet to finish stage1 of the build (I do have a working "xgcc").
Rob

How to integrate a Solaris x86 server on Sun Management Center ?

Hello people,
I want to integrate a Solaris x86 server on Sun Management Center platform.
If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
/opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
I supose that in this directory, SunMC will install sparc binary files
At this point, I can't follow the installation and abort it.
Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
Thanks

Hi Hisham,
hishooooo wrote:
Dear Gents,
I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
Regards,
[email protected]
http://www.HalcyonInc.com

Oracle RAC 10g on Solaris x86 using vmware

Guys,
I am practising 10g RAC installation on my laptop, wherein I have vmware workstation and
solaris-x86 version 10 installed on it.
I am trying to install Oracle 10g clusterware.
I have followed the steps for clusterware installation.
I am facing an errror on one of the node while running root.sh.
On the first node, the root.sh runs fine.
The following is the log.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
xsan001
CSS is inactive on these nodes.
xsan002
Local node checking complete.
Run root.sh on remaining nodes to start CRS daemons.
=============================
On the second node, the root.sh gives error.
bash-3.00# ./root.sh
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory '/u01/app/oracle/product' is not owned by root
WARNING: directory '/u01/app/oracle' is not owned by root
WARNING: directory '/u01/app' is not owned by root
WARNING: directory '/u01' is not owned by root
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: xsan001 xsan001-priv xsan001
node 2: xsan002 xsan002-priv xsan002
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Now formatting voting device: /dev/rdsk/c0d0s4
Format of 1 voting devices complete.
Startup will be queued to init within 30 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
Failure at final check of Oracle CRS stack.
10
Can you provide some sort of clue what could be done to resolve the above error?

Refer to http://www.oracleracsig.org/ Under documents section select OS=Solaris. You will find a document on Oracle RAC on Solaris10 using Vmware.

Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0

Hello,
Maybe you can help me (new on RMAN backup) in doing this.
I have configured a single Oracle 10g database to have backup with RMAN with following steps:
1. $ mkdir $ORACLE_BASE/rman_scripts
2. $ mkdir $ORACLE_BASE/logs
3. $ mkdir $ORACLE_BASE/tracking
4. $ mkdir $ORACLE_BASE/c_backup
5. $ sqlplus sys/<password> as sysdba
6. SQL> alter system set db_recovery_file_dest_size = 50G scope=both;
7. SQL> alter system set db_recovery_file_dest='${ ORACLE_BASE}/flash_recovery_ area' scope=both;
8. SQL> alter system set log_archive_dest_10='location= use_db_recovery_file_dest';
9. SQL> shutdown immediate
10. SQL> startup nomount
11. SQL> alter database archivelog;
12. SQL> alter database open;
13. SQL> alter database enable block change tracking using file '${ORACLE_BASE}/tracking/rman_ change_track.f';
14. $ rman target /
15. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK
TO '/var/opt/oracle/flash_ recovery_area/ORCL/c_backup/% F';
16. RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
17. RMAN> CONFIGURE BACKUP OPTIMIZATION ON;
18. RMAN> CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
19. RMAN> exit
I need to configure incremental backup with RMAN on a two node Solaris x86 with Oracle RAC 10g Enterprise Edition Release 10.2.0.3.0 installation.
We also use ASM to store database files, and have Oracle software installed on separate file systems (two Oracle roots for Node1 and Node2).
I have following questions:
1) where to put Flash Recovery Area (FRA)?
I saw recommendations to put FRA on the ASM, is this the best way to do it?
2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
3) Is it possible/recommended to run RMAN from Node1 only?
Below is the script used to run RMAN on the normal Oracle database (without RAC) which I need to change :
=============================================================================================
2.0 Oracle backup script: /opt/app/oracle/rman_scripts/backup.sh
Use this for daily backups, possiblly as a cron job.
Once a week run this: /opt/app/oracle/rman_scripts/backup.sh FULL
All other days of the week: /opt/app/oracle/rman_scripts/backup.sh INCREMENTAL
Note: You may have to change ORACLE_SID, ORACLE_BASE below to match your database.
=============================================================================================
#!/usr/bin/ksh
ORACLE_SID=orcl
ORACLE_BASE=/opt/app/oracle
ORACLE_HOME=${ORACLE_BASE}/product/10.2.0/db_1
PATH=${ORACLE_HOME}/bin:/usr/bin
LOGDIR=${ORACLE_BASE}/logs
LOGFILE=${LOGDIR}/rman.log
if [[ $# < 1 ]]
then
echo "usage: backup.sh FULL|INCREMENTAL"
exit;
fi
BACKUPTYPE=${1}
full='FULL'
incremental='INCREMENTAL'
if [[ $BACKUPTYPE == $full ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi
if [[ $BACKUPTYPE == $incremental ]]
then
$ORACLE_HOME/bin/rman target / nocatalog log ${LOGFILE} append << eof
run {
backup database;
backup incremental level 1 database;
SQL 'alter system archive log current';
backup archivelog all;
delete noprompt obsolete;
exit;
eof
echo ''
fi

Hi [email protected],
Q1) where to put Flash Recovery Area (FRA)?
A1) With RAC: on the shared storage
I saw recommendations to put FRA on the ASM, is this the best way to do it?
If you want your backups to be available for both nodes you have to use shared storage or tape using an mml library.
So if you want to use the FRA for rman backups and the database is on ASM just make ASM the standard for the FRA as well.
Q2) Can I put FRA on another file system (not on the ASM) which is available only from Node1? This way I can save space on the ASM.
A2) Than you cannot recover in case Node1 is down. Best would be to send your storage admin to a training course so he can manage the clustered raw devices needed for ASM.
Q3) Is it possible/recommended to run RMAN from Node1 only?
A3) No see A2.
Regards,
Tycho

Solaris x86 on HP pavilion laptop

I am trying to install solaris x86 version on my pavilion zt1000. The solaris install cd boots and then crashes with the following "boot panic: trap type 0 error 0 at 13bd7f" and bunch of register information.
I have tried 3 different CDs and even tried creating a bootable floppy disk. The floppy disk booting just hangs at the solaris boot manager screen.
Any ideas ???
To start with can solaris be installed on a HP pavilion
Thanks for any info anybody can provide.
Sriram

I do remember that everyone who installed on a laptop had to use an external keyboard during the installation. While I dont have any info specific to the HP, search the forum for past laptop posts - someone has probably had a similar issue and take a look at these pages.
http://www.bolthole.com/solaris/x86-laptops.html
http://www.lifamily.org/solaris/x86-laptops.html
http://home.t-online.de/home/hburde/laptop.html
http://www.xig.com/Pages/Atop/LaptopStatusListsSummit/ShouldWorkLaptops-2.html
I'm confident you can get it done!
Lee

Solaris x86 with card on-board

Hi all,
I got a problem when installing Solaris9 x86 on ibm NetVista Machine.
I have installed 2 other machines with separated network card sucessfully. I can configure to connecto to my LAN network.
But when install on 2 ibm NetVista machines (which include onboard network card ), It is fail to be configured to connect to the network in both following cases:
Case 1: I choose proper driver as Sun suggest for Intel VE Pro(R) 10/100 : iprb. And the Solaris detect successfully. I checked by "ifconfig -a" and saw the network card active on "iprb0".
Next, I following correct instructions to configure the network card to connect to the LAN. But when i ping IP (9.187.186.18) to other computer in our same subnet LAN,
The system display eg: "No anwer from 9.187.186.18"
I run the "snoop" command to view broadcasr ARP in an other terminal. The snoop terminal displays ARP signal boradcasting from the Solaris. However, it can nerver get ARPs from other computer in LAN.
Case 2: I add 3COM network driver to the solaris ( onboard card is no loger used ). The system can auto-detected this card and i can configure to connect to the network. The problem remain unchange.
Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular configuarion for on-board network card. ???
Can any boy help me to solve this problem ??
Best regards,
Thang,
Vietsoftware Developer

However, it can nerver get ARPs from other computer in LAN.Are you perhaps running "snoop" on a box different from the one that you're trying to ping, and are you using
a switched ethernet? In that case it would be OK if you only see the ARP broadcast, because the ping target
box will send the ARP reply directly to the MAC of the requesting station (i.e. there's no ARP broadcast reply),
and an ethernet switch will send the ARP reply directly to the port where the station with the given destination
MAC is connected - no other port should see the reply.
If you're trying to ping 9.187.186.18 from the new Solaris x86 box, try to run snoop on the 9.187.186.18
system. 9.187.186.18 should see the ARP broadcast from the LAN, and the 9.187.186.18 box should list the
ARP response it sends back to the LAN.
Is there any special in IBM Netvista machine need to be configure under Solaris x86 or any particular
configuarion for on-board network card. ???I guess the interrupt handler for the NIC is not working, so the Solaris x86 sees no incomming packets.
See the "troubleshooting" section on the following page:
http://solaris-x86.org/documents/tutorials/rtls.mhtml

Peoplesoft on Solaris x86-64

Does Oracle have any plan to fully certifiy Solaris x86-64 to have complete support on Peoplesoft (all tiers) not just for DBMS?
Edited by: user10790231 on Apr 7, 2009 9:08 AM

Yes, according to the PeopleTools roadmap presentation during the last Open World, PT8.50 could be fully supported on Solaris 64-bits.
Please, find out more (page 33) :
http://blogs.oracle.com/peopletools/PeopleTools%20Roadmap%20-%20OOW%202008%20-%20Part%202.pdf
But this is a roadmap, no garuantee that'll be the case at the end.
Nicolas.

Which 10g release supports Solaris x86 version 10?

Hi,
I downloaded Oracle 10.1.0.3 for Solaris x86. When I installed it, I got error, saying I can only install this version on Solaris 9 x86. Do you have any idea which Oracle 10g version supports Solaris x86 version 10?
Thanks
L

Hi,
If we believe metalink, Oracle 10gR1 is already certified for Solaris x86
Solaris Operating System x86 Version 10
Oracle Database - Enterprise Edition Version 10g
Status: Certified
Certification Note:
Install Information:
o 1. Execute runInstaller with the -ignoreSysPrereqs option.
o 2. Select 'Do not create a starter database' when installing Oracle 10g.
o 3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
o 4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
o 5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.
Have you run installer like recommended in point 1 ?
For 10gR2, you need to wait december for certification.
Nicolas.

Telnet from Windows PC is very slow to Solaris x86, after Net linked

(Sorry about the re-post. I posted in the wrong group earlier)
I got the following info from this forum, in regards to configuring my Solaris x86 to link to the Net:
# echo 192.168.0.1 > /etc/defaultrouter
# route add default 192.168.0.1
# echo nameserver 192.168.0.1 >> /etc/resolv.conf
# cp /etc/nsswitch.dns /etc/nsswitch.conf
So I did the above steps, reboot the Solaris, and my Solaris system can link to the Net fine afterwards. But ever since it had Net access, another problem is created.
Whenever I telnet using a command line from a Windows XP computer, it takes a long time to telnet to this Solaris system. Before, I would see the Solaris login prompt for telnet in a few seconds. Now, it's about 1 minute. Plus, if I try to use an xterminal software from that PC to link to the Solaris x86, it hangs.
So after I undo all the 4 commands above, reboot the Solaris computer, all these problems disappear. I can telnet from my Windows PC to this Solaris system very quickly. However, I no longer have Internet access from my Solaris.
Anyone knows how I can fix this problem? Thanks.

It sounds like a name resolution issue. Can you post the contents of your /etc/nsswitch.conf file for us?

Jre for solaris x86

hi,
I know that there is a separate JRE for Solaris X86. But my problem is that i have Solaris x86 installed an amd 64 bit machine and also on an Intel 64 bit machine.
I would like to know if it is possible to use the same jre for both the machines.
Edited by: Diganth.A on Feb 4, 2009 11:16 AM

Diganth.A wrote:
hi,
I know that there is a separate JRE for Solaris X86. But my problem is that i have Solaris x86 installed an amd 64 bit machine and also on an Intel 64 bit machine.
I would like to know if it is possible to use the same jre for both the machines.
Edited by: Diganth.A on Feb 4, 2009 11:16 AMThis all depends on the operating system your are using and the type of 64 bit hardware architecture type.
Can you please provide more specific details about the architecture and operating systems you are trying to install your JRE on?
Typically you will want to download a pre-configured JRE for your OS platform and hardware architecture.

Weblogic 8.1 for solaris x86 download

hi, i'm looking for weblogic 8.1 for solaris x86, where i can download the files?
thanks

hey thanks for the reply, sorry for my late response, well last time i was found the archive of all BEA Release Product with metalink account, i was downloaded the weblogic 8.1 SP4 for solaris x86.. the installation seems fine, until i try to create the domain.. here is my step installation
-bash-3.00$ ./config.sh
Java Accessibility Bridge for GNOME loaded.
Unable to instantiate GUI, defaulting to console mode.
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Create or Extend a Configuration:
Choose between creating and extending a configuration. Based on your selection, the Configuration Wizard guides you through the steps to generate a new or
extend an existing configuration.
->1|Create a new WebLogic configuration
| Start here to create a WebLogic configuration in your projects
|directory.
2|Extend an existing WebLogic configuration
| Start here to extend an existing WebLogic configuration. Use this
|option to add applications and services, including Database access (JDBC)
|and Messaging (JMS). This option also enables you to extend functionality
|by enabling WebLogic Workshop.
Enter index number to select OR [Exit][Next]> 1
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Select a Domain Template:
Please select a template from the list or select another directory of templates.
* [wildsoft/oracle/weblogic81/common/templates/domains]
1|Basic WebLogic Workshop Domain 8.1.4.0
| BEA Systems, Inc.
| Create a basic WebLogic Workshop domain, without installing sample
|applications. Domains created from this template will support the
|WebLogic Server and WebLogic Workshop runtime functionality, including
|support for J2EE applications, Web applications, Web Services and custom
|controls. Use domains created from this template for development of
|WebLogic Workshop applications.
->2|Basic WebLogic Server Domain 8.1.4.0
| BEA Systems, Inc.
| Create a basic WebLogic Server domain without installing sample
|applications.
3|WebLogic Server Examples Domain 8.1.4.0
| BEA Systems, Inc.
| Create the WebLogic Server Examples domain in a directory outside of the |installed kit. The Examples domain contains a collection of examples to
|show best practices for coding individual J2EE APIs.
4|Avitek Medical Records Sample Domain 8.1.4.0
| BEA Systems, Inc.
*Enter index number to select OR [Down][Exit][Previous][Next]> 2*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Choose Configuration Option:
*Do you want to run the wizard in express mode?
->1|Yes
2|No
*Enter option number to select OR [Exit][Previous][Next]> 1*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
| Name | Value |
_|_________________________|_________________________________|
1| *User name:       |            weblogic             |
2| *User password:     |                                 |
3| *Confirm user password: |                                 |
4| Description: | The default administration user |
Select Option:
1 - Modify "User name"
2 - Modify "User password"
3 - Modify "Confirm user password"
4 - Modify "Description"
*Enter option number to select OR [Exit][Previous][Next]> 2*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
"*User password:" = []
Input new User password: OR [Exit][Reset][Accept]> weblogic1*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
| Name | Value |
_|_________________________|_________________________________|
1| *User name:       |            weblogic             |
2| User password:     |            ******** |
3| *Confirm user password: |                                 |
4| Description: | The default administration user |
Select Option:
1 - Modify "User name"
2 - Modify "User password"
3 - Modify "Confirm user password"
4 - Modify "Description"
5 - Discard Changes
*Enter option number to select OR [Exit][Previous][Next]> 3*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
"*Confirm user password:" = []
Input new Confirm user password: OR [Exit][Reset][Accept]> weblogic1*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Configure Administrative Username and Password:
Create a user automatically assigned to the Administrative Role. This user is
the default administrator used to start development mode servers.
| Name | Value |
_|_________________________|_________________________________|
1| *User name:       |            weblogic             |
2| User password:     |            ******** |
3| Confirm user password: |            ******** |
4| Description: | The default administration user |
Select Option:
1 - Modify "User name"
2 - Modify "User password"
3 - Modify "Confirm user password"
4 - Modify "Description"
5 - Discard Changes
*Enter option number to select OR [Exit][Previous][Next]>next*
<--------------------- BEA WebLogic Configuration Wizard --------------------->
Domain Mode Configuration:
Enable Development or Production Mode for this domain.
->1|Development Mode
2|Production Mode
*Enter index number to select OR [Exit][Previous][Next]> 1*
A fatal error has occured. This application will terminate.

ASE for Solaris x86

I really need a developers edition of ASE for Solaris x86. The current versions that are available are only for Linux or Windows. Is there anywhere I can get the Solaris x86 version??

You haven't mentioned which ASE version you're looking for so I'm going to assume a newer/recent version of ASE 15.7 is sufficient ...
For quite awhile now all ASE downloads (IR, GA, EBF, SPxxx) have contained the entire code line (ie, you don't have to find a GA release and then apply a smaller/delta ebf patch file to get the latest version).
If you've got access to the EBF downloads @ sybase.com you should be able to download a recent copy of ASE 15.7 for Solaris/x86. During installation just pick the developer license version (the install will generate a generic *lic file for the developers version).
While there may be a way to download the file from the SAP website(s), I wouldn't have a clue since a) the SAP websites are poorly-designed/confusing and b) SAP is clamping down pretty hard on what Sybase related downloads are available and to whom.

Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

Greetings, all.
Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
# mount -F nfs x.x.x.x:/f /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f
# mount -F hsfs x.x.x.x:/F /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F
[FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
# mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/s10_106_software
# mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F nfs x.x.x.x:/s10_106_software /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/s10_106_software
# mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/s10_106_software
# mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

After three weeks, you deserve a reply. Windoze does
not natively support NFS.Also deserves a decent answer...
There are two ways to do this:
Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

During Postgresql configuration initdb freezes on solaris 10 x86

Similar Messages

Maybe you are looking for