During R12 upgrade adworker for patch u6678700.drv fails for afopp002.sql

Hi Experts,
During R12.1.1 upgrade from 11.5.10.2 adworker for patch u6678700.drv fails for afopp002.sql
The exact error being faced is
sqlplus -s APPS/***** @/u03/oracle/CRP1PROD/apps/apps_st/appl/fnd/12.0.0/patch/115/sql/afopp002.sql &un_fnd &pw_fnd
Connected.
declare
ERROR at line 1:
ORA-20000: Oracle Error Mkr1= -24018 - ORA-24018: STOP_QUEUE on
APPLSYS.FND_CP_GSM_OPP_AQ failed, outstanding transactions found
ORA-06512: at line 15
I even tried restarting the worker,bounced the database and even tried running u03/oracle/CRP1PROD/apps/apps_st/appl/fnd/12.0.0/patch/115/sql/afopp002.sql manually which hangs for indefinitely.
Any suggestion.

Hi Srini,
Let me walk you through briefly regarding the upgrade process:
Initially the existing instance was 11.5.10.2 with 9.2.0.6 database.Last year the database was upgraded to 11.2.0.1 and configured with 11.5.10.2
However the 11g database upgrade steps specifically for EBS 11i(interoperatibility notes for 11i with 11g database) was not followed properly.
And one of the major key issue identified was the 11g Example CD was not installed on top of 11g software during database upgrade.Which is the pre-req for 11g upgrade in EBS
And as per my experience it creates issues during R12 upgrade (patch u6678700) and giving errors pertaining to oracle text error.
SR was raised for the same and was suggested, since there is no other option kindly install the Oracle 11g software and on top of that 11g Example CD and map the 11g database and go ahead with the R12 upgrade.
Now coming back to the core issue being faced, Pre-req followed properly.No errors in alert logs.
Can missing the Example CD installtion be the issue?
Regards,
Aman Vats

Similar Messages

  • Error while applying patch u6678700.drv

    Hii..
    I have upgrded my DB from 10.2.0.4 to 11.2.0.1 and now
    Im upgrading my Apps from 11.5.10.2 to 12.1.1, and while applying the patch u6678700.drv, im getting the following error,
    amviccd.sql  failed
    amviccn.sql  failed
    when i checked the worker logfile i got the following error message,
    sqlplus -s APPS/**** @/u02/R12/apps/apps_st/appl/amv/12.0.0/patch/115/sql/amviccd.sql &un_amv &pw_amv*
    Connected.
    DECLARE
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-11422: linguistic initialization failed
    DRG-11446: supplied knowledge base file /u01/11gR1/ctx/data/enlx/droldUS.dat
    not installed
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
    ORA-06512: at "SYS.DBMS_SQL", line 1053
    ORA-06512: at line 56
    sqlplus -s APPS/**** @/u02/R12/apps/apps_st/appl/amv/12.0.0/patch/115/sql/amviccn.sql &un_amv &pw_amv*
    Connected.
    DECLARE
    ERROR at line 1:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-20000: Oracle Text error:
    DRG-11422: linguistic initialization failed
    DRG-11446: supplied knowledge base file /u01/11gR1/ctx/data/enlx/droldUS.dat
    not installed
    ORA-06512: at "CTXSYS.DRUE", line 160
    ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 366
    ORA-06512: at "SYS.DBMS_SQL", line 1053
    ORA-06512: at line 49
    Can anyone help me solving the issue, so that i can continue with the patching and upgradation
    Thanks nd regards

    I have checked that note already, but i cannot Execute the script $ORACLE_HOME/appsutil/clone/adlnkoh.sh to relink the RDBMS executables as mentioned in step 4 of that note because the adlnkoh.sh is not present in *$ORACLE_HOME/appsutil/clone/* location in my instance.
    Kindly provide anotehr solution as imwaiitng for this
    Edited by: 881222 on Jan 5, 2012 3:16 AM

  • Error during upgarde patch u6678700.drv

    Hi
    Im upgrading from 11.5.10.2 to 12.1.1,
    During this, one script is taking too much time to execute,
    GMIG3MIB.sql   when i checked the worker logfile it is showing the following error message, it is asking to enter some value.
    sqlplus -s APPS/**** @/u01/R12_UAT/apps/apps_st/appl/gmi/12.0.0/patch/115/sql/GMIG3MIB.sql*
    Enter value for 2:
    Can anyone help me on this issue,
    Im waiting for your replies.
    Plz do the needfull ASAP.
    Thanks in advance

    881222 wrote:
    No, during our 1st iteration i didnt come across such an issue,
    This time around Initially i had applied some preinstall patches for financial,procurement nd SCM modules as mentioned in the Metalink Note:
    1448102.1.
    When testing/performing upgrades, you should always apply exactly the same patches in the same order in all your iterations - you should not deviate from this plan - this is considered best practice ( http://docs.oracle.com/cd/E11882_01/backup.112/e10642/rcmintro.htm#CHDBHGGE ).
    Because of this in the same UAT Iteration, earlier we came across some errors regarding to IBY .ldf files.
    and i checked with SR and they verified and asked me to skip the jobs related to iby .ldt files because some files were having higher version, which is not supported by this patch.
    They told that the issue will be resolved during the 12.1.3 patching.
    Is the current issue related to that IBY objects or not.??
    Can you plz advice on this.Since your UAT upgrade process seems to be different than your test upgrades, it is difficult to say if this issue is related to IBY objects.
    HTH
    Srini

  • Error while upgrading from 11i to R12 and while applying patch u4440000.drv

    Error :
    There are now 55242 jobs remaining (current phase=A78):
        0 running, 1 ready to run and 55241 waiting.
    Assigned: file adobjcmp.sql on worker  1 for product ad  username APPLSYS.
       FAILED: file adobjcmp.sql on worker  1 for product ad  username APPLSYS.
    Deferred: file adobjcmp.sql on worker  1 for product ad  username APPLSYS.               (Deferment number 1 for this job)
    Assigned: file adobjcmp.sql on worker  1 for product ad  username APPLSYS.
       FAILED: file adobjcmp.sql on worker  1 for product ad  username APPLSYS.
    ATTENTION: All workers either have failed or are waiting:
               FAILED: file adobjcmp.sql on worker  1.
    In worker log file
    STATUS_MESSAGE
    Running UTL_RECOMP.RECOMP_PARALLEL...
    declare
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    ERROR:
    ORA-03114: not connected to ORACLE
    SP2-0359: memory exhausted
    Time when worker failed: Mon Oct 21 2013 09:07:10
    And in the Alert log file
    Errors in file /u01/ora/visdb/10.2.0/admin/VIS_linux105/udump/vis_ora_28457.trc:
    ORA-07445: exception encountered: core dump [qcpiqbk()+1113] [SIGSEGV] [Address not mapped to object] [0x4] [] []
    But the database is in open stage only.
    SQL> select status from v$instance;
    STATUS
    OPEN
    And when i compile invalids manaully. it is saying that
    ERROR:
    ORA-03114: not connected to ORACLE

    Hi,
    Running UTL_RECOMP.RECOMP_PARALLEL...
    declare
    ERROR at line 1:
    ORA-03113: end-of-file on communication channel
    Please refer:
    "ORA-3113: end-of-file on communication channel" Error When Compiling invalid Objects Using Adadmin (Doc ID 1277719.1)
    ORA-03113, ORA-03114, ORA-01041 While Running "adadmin", "adpatch" or "adutlrcmp.sql" (Doc ID 1125213.1)
    As Hussein suggest, please log an SR for such internal errors, and the lookup note pointed out by Hussein should probably give a note with solutions.
    Thanks &
    Best Regards,

  • Why does NFS umounts itself during R12 upgrade

    Dears,
    We have a problem in NFS. When our oracle team in upgrading the oracle to R12, after a certain step the NFS umounts, from the client side the error as below,
    Jun 23 10:16:53 bananadev01 nfs: [ID 733954 kern.info] NOTICE: [NFS4][Server: appledev01][Mntpt: /u02]NFS server appledev01 not responding; still trying
    Jun 23 10:19:57 bananadev01 nfs: [ID 559769 kern.info] NOTICE: [NFS4][Server: appledev01][Mntpt: /u02]NFS server appledev01 ok
    Jun 23 10:22:57 bananadev01 nfs: [ID 733954 kern.info] NOTICE: [NFS4][Server: appledev01][Mntpt: /u02]NFS server appledev01 not responding; still trying
    On the server, there aint any error related to NFS.
    Any help ?

    Hi Murali,
    We have a 11.5.10.2 instance with 10.2.0.5 database and we are Planning to upgrade the database to 11.2.0.3 during our upgrade R12.1.1, as per the note 761570.1, we have the Patch C and Path D available to us. We have decided to use the path C i.e upgrade the database to 11.2.0.3 during the R12 upgrade itself and no two downtime windows. As per this note 761570.1, in path c If the database upgrade is part of the R12 upgrade, perform all the steps in the Interoperabity Notes except the following steps:
    Verify software versions
    Run adgrants.sql
    Implement and run Autoconfig
    Re-create grants and synonyms
    Restart Applications server processes
    Apply Oracle Human Resources (HRMS) patch 7721754
    so does that mean we don't have to apply any patches mentioned under Verify software versions like Interoperability patch , ATG Patch 7456837 etc.. on 11i ?
    If you are planning to upgrade the database in the same downtime window of R12 upgrade, then you do not need to apply the patches under "verify software versions" section in the 11i doc. However, you need to consider applying the patches under the same section in (Interoperability Notes EBS R12 with Database 11gR2 [ID 1058763.1]). Those patches should be applied before you release the R12 instance to the users.
    Thanks,
    Hussein

  • Business Event during R12 upgrade (11.5.10.2 - 12.1.3)

    Best practices for R12 upgrade says to disable custom tiggers and business events.
    Disabling custom Triggers is fine , understood it.
    However the phrase "and business events." is a bit confusing for my customer.
    Though IMO ,it means disabling custom business events and not all ,however he is keen to know whether this means
    disabling standard business events as well.
    Also since we are bringing down all the services including WF services ,how can Business events be processed ?
    Moreover as far as I know ,enabling maintenance mode shuts down the Workflow Business Events System which means no business event will be processed.
    Thus why it is written in most of the Best Practices documents to disable business events ?
    thanks for your help.
    -SK

    I have never needed to disable business events in all the upgrades I did from 11.5.10.2 to 12.1.3 and I believe it is not mentioned in these docs (I understand it is mentioned in the best practices, but I believe it is not required).
    Oracle E-Business Suite Upgrade Guide Release 11i to 12.1.1 [ID 1082375.1]
    Oracle E-Business Suite Upgrade Guide, Release 11i to 12.1.3
    http://docs.oracle.com/cd/B53825_08/current/acrobat/121upgrade.pdf
    Thanks,
    Hussein

  • Can I retain my concurrent program schedule During R12 Upgrade ?

    Hi,
    We are approaching Oracle R12 Upgrade go live. We have large number of concurrent programs scheduled by various users. We are planning to put these programs on hold before upgrade. When we upgrade, do upgrade driver removes all schedules from concurrent program schedules? Is it wise to cancel all scheduled programs and reschedule them after upgrade?
    Please help!
    Best Regards,
    Dhaval Khamar

    When we upgrade, do upgrade driver removes all schedules from concurrent program schedules? No.
    Is it wise to cancel all scheduled programs and reschedule them after upgrade?No, just put them on hold before the upgrade then resume those jobs after the upgrade.
    Thanks,
    Hussein

  • U6678700.drv fails with "AutoPatch error: Unable to allocate memory in proc

    I am running an adpatch session to apply the u6678700.drv upgrade driver to an 11.5.10.2 instance running on AIX 6.1.
    Just after the "JDBC connect string from AD_APPS_JDBC_URL is......" statement, I receive "AutoPatch error: Unable to allocate memory in procedure aiumab()."
    I have confirmed and reconfirmed that all O/S, Software, ulimit and kernel settings are at the required minimum values/levels per Document ID# 761569.1.
    What else can I check into as to the cause of this error?

    There are no entries in the DB Log of any relevance to the error.
    ADPATCH LOG FILE:
    Uploading PL/SQL direct execute exceptions from file ...
    Done uploading PL/SQL direct execute exceptions from file.
    Done validating PL/SQL direct execute exceptions file.
    JDBC connect string from AD_APPS_JDBC_URL is
    (DESCRIPTION=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS_LIST=(ADDRESS=(PROTOCOL=tcp)(HOST=lajeffeux03)(PORT=1521)))(CONNECT_DATA=(SID=UPG)))
    AutoPatch error:
    Unable to allocate memory in procedure aiumab().
    You should check the file
    /oracle/d01/oraupg/apps/apps_st/appl/admin/UPG/log/6678700_adpatch.log
    for errors.

  • An error has occurred during report processing. (rsProcessingAborted).. Query execution failed for data set

    Hi All,
    I'm facing a strange problem..
    I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web.
    in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also..
    if I press "View Report"  following error occurs..
    An error has occurred during report processing. (rsProcessingAborted)
    Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
    For more information about this error navigate to the report server on the local server machine, or enable remote errors
    please suggest any alternative ways to overcome this issue
    thanks in adv.

    in my case the problem is
    one virtual machine is for developers
    other for testers
    in developers i created a report, then save like *.rdl and copy to testers machine, does not work there
    the error what testers get is
    Error during the local report processing.
    Could not find a web-based application at http://developersMachine/AnalyticsReports/DataBaseConnector.rsds
    and the solution is to use alternative url or in some cases http://localhost/

  • Silent install for patch release 3 waiting for carriage return

    I'm trying to get Patch Release 3 (to take my 10.2.0.1.0 installtion to 10.2.0.4.0 on Linux RHEL 5/x64) to install using a ResponseFile so it can be scriptable.
    The actual silent install works fine - the problem lies with the patch install - it waits for the carriage return to be pressed oce it has been installed. And since its waiting for the Return key to be pressed, the script hangs.
    The command I'm running is
    +/oracle/staging/10g/patch/Disk1/runInstaller -ignoreSysPrereqs -silent -responseFile /oracle/staging/10g/patch.rsp << EOF+
    EOF
    I'm not even sure where to start looking to solve this issue.
    Can anyone point me in the right direction please...

    Hi;
    Did you follow patch 8.2 Installing the Oracle Database 10g Patch Set Noninteractively part?
    Also see:
    ERROR:Oracle 10.2.0.4 Patch Set Return Exit Code -1073741819 [ID 779582.1]
    OUI reports a successful silent install when errors are present [ID 793510.1]
    Regard
    Helios

  • Email notification works for one email address fails for another

    Hi,
    I have OEM 10.2.0.3 - one email address works fine, but another fails with message
    [email protected]: Test failed with message: "E-mail Address is invalid: Sending failed; nested exception is: javax.mail.SendFailedException: Invalid Addresses; nested exception is: javax.mail.SendFailedException: 550 5.7.1 Unable to relay"
    Now the weired thing is, that using the same SMTP gateway, I can send emails ok to this address via outlook etc.
    Anyone any ideas ? The xxxxxxxxxx in the address is actually a mobile number, but, as I say, it IS valid.
    Cheers

    Thanks for the reply, however, this is what I dont understand.
    The SMTP server is the same one I use for our email, ie, it is our exchange server, and from outlook, I am able to send email
    to the same address that is failing with EM. I'm not aware I need any authentication, or how it would need authentication only
    for external accounts ?
    you are correct howver, that it is an external account, and the same test fails for any external account. I'm just not sure how to fix this ?
    A manual session connecting to the SMTP server is as follows
    telnet smtp_server_name.com.au 25
    Trying 192.168.6.2...
    Connected to smtp_server_name.com.au (192.168.6.2).
    Escape character is '^]'.
    220 smtp_server_name.com.au Microsoft ESMTP MAIL Service ready at Fri, 5 Sep 2008 15:38:00 +1000
    helo
    250 smtp_server_name.com.au Hello [192.168.6.15]
    mail from: [email protected]
    250 2.1.0 Sender OK
    rcpt to: [email protected]
    550 5.7.1 Unable to relay
    quit
    221 2.0.0 Service closing transmission channel
    Connection closed by foreign host.
    $

  • Delay login for sometime if users fails for three times in apex

    i have a requirement in apex 4.1,
    suppose a user login to it and if he fails for three times consequetively than he will not able to login for next 30 minutes.this is the function i am using for doing authentication.
    i want to show timer at the top of the login page as user fails to login for three times continously..same functionality which is present in Apex 4.2.
    create or replace
    FUNCTION LWM_CHECK_CREDENTIALS(P_USERNAME IN VARCHAR2,P_PASSWORD IN VARCHAR2)
    RETURN boolean
    IS
    LC_USERNAME_1 LWN_LOGIN.USERNAME%TYPE;
    LC_PASSWORD_1 LWN_LOGIN.PASSWORD%TYPE;
    LN_COUNT NUMBER:=0;
    LN_COUNT1 NUMBER;
    LC_SQLERRM VARCHAR2(500);
    LN_COUNT2 NUMBER;
    BEGIN
    SELECT USERNAME,PASSWORD INTO LC_USERNAME_1, LC_PASSWORD_1
    FROM LWN_LOGIN
    WHERE UPPER( USERNAME) = UPPER(P_USERNAME)
    AND PASSWORD = (P_PASSWORD);
    UPDATE LWN_LOGIN SET COUNT= LN_COUNT
    WHERE UPPER(USERNAME)=UPPER(P_USERNAME);
    -- apex_util.set_authentication_result(0);
    RETURN true;
    EXCEPTION
    WHEN OTHERS THEN
    SELECT COUNT INTO LN_COUNT1
    FROM LWN_LOGIN
    WHERE UPPER(USERNAME)=UPPER(P_USERNAME);
    if ln_count1 <=2 then
    UPDATE LWN_LOGIN SET COUNT = LN_COUNT1 +1 ,
    TIMESTAMP = SYSTIMESTAMP --to_char(SYSdate,' HH24:MI:SS')
    WHERE UPPER(USERNAME)=UPPER(P_USERNAME);
    end if;
    LC_SQLERRM:=SQLERRM;
    SELECT COUNT INTO LN_COUNT2 FROM LWN_LOGIN
    WHERE UPPER(USERNAME)=UPPER(P_USERNAME);
    IF LN_COUNT2=3 THEN
    --APEX_UTIL.SET_AUTHENTICATION_RESULT(6);
    DBMS_LOCK.SLEEP(6);
    -- null;
    --INSERT INTO XXSAQUIB_TEST(A,B,C) VALUES(LC_SQLERRM,LN_COUNT2,'max attempt');
    end if;
    return false;
    END;
    Can any one provide me any link related to this which is helpful for me.
    Thanks in advance.
    Edited by: 969314 on 05-Nov-2012 03:17
    Edited by: 969314 on 05-Nov-2012 04:02

    Hi,
    When your authentication fails, stamp a "last failure" time on the record. Then check in your authorization that if the number of attempts is > X then the last failure timestamp must be less than sysdate - 30 mins.
    Then set the message text to be something like "you cannot log in for (x) minutes" where (x) is calculated based on sysdate and the last failure date.

  • Custom Reports migration during R12 upgrade

    During upgrade from 11i to R12, how do I understand from RD50s as to what would change in my custom reports in Financial, OM and SC modules? Is there a metalink document which can help me in making changes to my new data warehouse and ETLs? Please advise! Thanks - Singh

    user8599185 wrote:
    During upgrade from 11i to R12, how do I understand from RD50s as to what would change in my custom reports in Financial, OM and SC modules? Is there a metalink document which can help me in making changes to my new data warehouse and ETLs? Please advise! Thanks - SinghYou need to visit your custom objects definition/code and make sure all are valid. Oracle provide tools for seeded objects for which ones are obsolete (or not used) in R12
    Preparing Custom Development for Next Oracle E-Business Suite Release [ID 374398.1]
    EBS File Comparison Report Now Available
    https://blogs.oracle.com/stevenChan/entry/ebs_file_comparison_report_now
    Identifying Data Model Changes Between EBS 12.1.3 and Prior EBS Releases
    https://blogs.oracle.com/stevenChan/entry/ebs_data_model_1213
    https://blogs.oracle.com/stevenChan/tags/upgrades
    eTRM
    http://etrm.oracle.com/
    Thanks,
    Hussein

  • R12 upgradation :  query regarding patch 7461070

    I have to apply patch 7461070 as a part of upgradation. It's written in patch note that "must apply critical patch 6767273:R12.AD.A before applying the AD Mini pack". But how to check that instruction are not clear.
    FI :
    We only have izuprod.txt file under 11i APPL_TOP/admin
    $ ls -ltr *prod.txt
    -rwxr-xr-x 1 egapc2d appseeg 231650 Oct 30 2004 applprod.txt
    -rwx------ 1 egapc2d appseeg 4966 Oct 20 2006 izuprod.txt

    Run the query in (How to tell what your current AD patchlevel is. [ID 390671.1], under "Release 12 Single Tier" or "Release 12 Multiple Tiers" section), if you are on (Patch 4502962 - R12.AD.A) then you need to apply (Patch 6767273) before applying (Patch 7461070).
    Thanks,
    Hussein

  • U6678700.drv failed @A145 phase

    Hi,
    While applying patch 6678700 workers got failed at phase A145
    ATTENTION: All workers either have failed or are waiting:
    FAILED: file APXLASET.ldt on worker 1.
    FAILED: file ARXLASD.ldt on worker 2.
    FAILED: file CCXLASET.ldt on worker 3.
    FAILED: file dppxlasd.ldt on worker 4.
    FAILED: file FVXLAAEM.ldt on worker 5.
    FAILED: file cexlaevt.ldt on worker 6.
    FAILED: file funxlaemseed.ldt on worker 7.
    FAILED: file FAXLASD.ldt on worker 8.
    ATTENTION: Please fix the above failed worker(s) so the manager can continue.
    in worker log file...
    Uploading from staging tables
    Error loading seed data for XLA_SUBLEDGERS: APPLICATION_SHORT_NAME = SQLAP, ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_subledgers_f_pkg.load_row. ORA-20001: -: XLA-95103: An internal error occurred. Please inform your system administrator or support representative that:
    An internal error has occurred in the program xla_subledgers_f_pkg.insert_row. ORA-06508: PL/SQL: could not find program unit being called..
    Please suggest on this.
    Thanks,

    Hi Hussein,
    Thanks for the quick replay.
    I checked [ID 1073904.1] according to note i am raising SR for bug scripts.
    and i will update once i got the scripts form oracle.
    mean whiile I appreciate if u come with any other solution.
    Thanks,
    Edited by: Chandra on Feb 2, 2012 10:52 PM

Maybe you are looking for