During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.
During the final step of installing after download, I get an error - The Installer encountered an error that caused installation to fail.
Nobody can tell you anything. You have not provided any proper system information or even told us what you are actually downloading.
Mylenium
Similar Messages
-
when trying to install itunes and i get a error that says there is a problem with this windos installer package. a prodram required for this install to complete could not be run. contact you support personnel or package vendor
I have the same problem
-
I am using apple configerator. I am unable to prepare or supervise 1 ipad. After preparing, I get an error that says "refresh completed but with an error, unable to verify supervision state" . I have erased all content and set up as a new ipad and tried again with no success. Any help would be appreciated
Hello jaybearden,
Thanks for the question. After reviewing your post, it sounds like you are not able to restore the iOS device since you get an error 9. I would recommend that you read this article, it may be able to help the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
When installing After Effects I get an error U44M1l210
I have tried to install After Effects twice now. Every time I get the message that installation was successful, but patch failed. I uninstall, download and install again but the same error appears. Error U44M1l210
Please help!Creative Cloud Help / Error U44M1I210 | Install updates :
http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html -
Im trying to install after effects; keep getting a error
Im trying to install after effects and I keep getting a error message saying I need to check my firewall, how do I fix this problem ?
Hi Dee_Hazely ,
Welcome to Adobe Forums.
Temporarily disable any firewalls and antivirus software and try to install again:
Start the system in Safe Boot mode (Mac OS)
http://helpx.adobe.com/x-productkb/global/start-safe-boot-mode-mac.html
Restart Windows in a modified mode (Windows OS)
http://helpx.adobe.com/x-productkb/global/restart-windows-modified-mode-windows.html
Retry installation ,Please reply for any assistance.
Thanks -
After downloading itunes get an error message saying itunes was not installed
I am so frustrated because I had itunes on my laptop and after an update it wouldnt work. I have uninstalled itunes and downloaded the newest version but keep getting this message on screen 'Itunes was not installed correctly. Please re-install itunes. Error7(windows error 5) Has anybody got any ideas
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background' -
Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.
it says that Windows Resource Protection could not start the repair service.
Okay. We've got a broken Windows Modules Installer on the PC, then.
It's a bit of an involved fix getting past it, but we've had success here with it in the past.
First, I'd strongly suggest setting up a system restore point.
Now try the Scenario III treatment from the following document:
Windows Update Error 80070424 in Vista
Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
Windows Update error 8000FFFF
If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
Now try another iTunes install. Does it go through without the 0x80070424 this time? -
I have a laptop PC and am trying to install my product. After the download is complete I get an error that says "the file archive part of Adobe Photoshop Elements 13 is missing. You need all parts.
Please help, I don't know how to do this
Thanksyou need both the exe (which you have) and the matching 7z (that you don't have, yet). dl it:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Can't download latest Itunes 10.5 - Keep receiving following error: An error occurred during the installation of assembly 'Microsoft VC80 CRT.type="win32",version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".pro cessorArchitecture="x86".
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
I have this error pop up while almost done installing, "An error occurred during the installation of assemble 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b 3b9a1e18e3b",processorArchitecture="amd64"". HRESULT: 0x80070422
OK. If both of you are Windows 7. Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
After that see if you still get this error message.
The last resort would be to unistall and reinstall the whole thing.
Follow the steps below:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Tried to install itunes 10/5 and got this error:
An error occured during the installation of assembly 'Micrsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and Support for more information. HRESULT: 0x80073712
Can anyone help solve this problemExactly the same problems as many others with iTunes 10.5 and my Windows 7 32 bit laptop: An error occurred during the installation of assembly 'Microsoft.VC80.CRT .type="win32", … HRESULT:0x800736FD. I followed the Apple instructions to completely uninstall earlier iTunes and all Apple applications and then tried to re-install iTunes 10.5. Numerous attempts. Still no success. Constantly goes through the install and then rolls back after failure.
By unzipping using WinRAR and installing each module separately it seems that the module that fails is the AppleApplicationSupport.msi
Finally I uninstalled everything again and reinstalled iTunes 10.4.1. This installed perfectly. So at least I still have iTunes.
I was able to install iTunes 10.5 on myWindows XP SP3 desktop.
I noticed with WinRAR that the AppleApplicationSupport.msi file with 10.5 is a completely different size to that with 10.4.1. This suggests to me a conflict between the latest AppleApplicationSupport.msi and Windows 7. -
Can't download iTunes on my laptop receive following error message- an error occurred during the installation of assembly Microsoft vc80.CRT.type="win32", version 8.0.50727. 6195 public key token= ifc8b3b9a1e18e3b process architecture=x86hresult:0073
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitecture = "x86" Please refer to help and support.
Ok I cant find a way to fix this so I basically cant use my Verizon Iphone 4 because it wont connect on an old version...OK. You may have to reinstall everything from scratch but follow following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch -
Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources
That's perfect, thanks.
error writing to file: C:\Program
files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
itxib. Verify that you have access to that directory
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?
Maybe you are looking for
-
Windows 7 - No sound on N100 768-B9G
Hello All, I just installed the new 7, everything's ok but the audio: Windows automatically installed something called S/PDIF digital audio, and when I play music the lever seems to be moving, but no sound on the speakers or phone jack. I tried insta
-
Should I upgrade to STRUTS, ADF-UIX or to JSF
My applications still use the older bc4j objects and the trivial page flow manager. I have been looking at upgrading these apps to ADF-UIX and using STRUTS. With the flurry of announcements about JSF, should I skip the planned upgrade above and go di
-
Is there a property to change the hilite color for editable text sprites? I've got white text on a blue background and the default hilite color is a lighter shade of blue that's almost impossible to see. Thanks.
-
Hi! I'm nearly there but I can't get this scipt to work!! Its a basic gallery I'm building that imports images via xml with thumnails. Problem is I started trying to make columns and it wont work! I'm nearly there though I can smell it! The Column bi
-
Exception not firing on openConnection.connect
Hi all ! I'm trying to see if a URL exists before I go to it in an applet. I'm using the following code : try { url = new URL(getCodeBase(), "doesnotexist.htm"); } catch(MalformedURLException e) { System.out.println("i dont get an error her