During the validation of budgets, should be warnings that not allow the rec

Hi All,
During the validation of budgets, should be warnings that not allow the record, if any required fields unfilled. It´s possible to maintain a pop-up message?
Can anyone help me Pls.? Thanks

Hi,
This needs to be done through native excel functionality. You can do this using the data validation.
Hope this helps.

Similar Messages

  • Joined MyBB during in store purchase today, should I see that in my purchase history?

    I joined My Best Buy this evening at a local store in order to join gamer's club. This isn't a gamer's club question though. At home earlier in the day I had created a MyBB account online because I heard that was going to be needed first to sign up for gamer's club. Figured I was saving time to do that first step at home. With the cashier at the store, told him my phone number, the account that I created online popped up on his screen, but he told me he didn't see a street address with it (because it didnt ask me for one when I did it online) so he asked me if he could just start me all over. I said no problem. Unfortunately I used the same email during both of these signups, so when I came home and logged in, it was still showing me the ID number I had initially gotten earlier today. But I was able to find the option to associate a different ID number with my account, so at least that looks okay now. I've now got my email associated with the proper ID number on the plastic card that I left the store with. After doing all that on my own, I finally just now received an activation email triggered by the new sign up I did in the store about an hour ago, but I can probably just leave that alone, it should all be registered now.
    I bought the 30 dollar GCU membership as well as a 20 dollar pair of headphones tonight. I see online where it says actual points can take 15 days to show up, but in my purchase history I don't even see any sign of my purchase today. Would have been nice to have earned myself some points already. Did he forget to scan my card to go along with the purchase? Or is it normal that the initial purchase during which you sign up for MyBB doesn't start earning you points yet or show up in your purchase history? Or does it just not show up immediately? I would have waited to get the headphones if I wasn't going to earn any points on them today.
    Don't mean to jump the gun with so much anxiety about this, but got a little flustered when I came home and saw the wrong ID number associated with my email, and now not seeing my purchase listed. This leads me to hope everything worked properly with my gamer's club sign up, not sure if I should be able to see any indication that I've joined yet in my account data or if the first acknowledgement I'm going to get is the welcome email in 2-3 days with the coupons. But I will take those questions to the gamer's club part of the forum.
    Thanks for any help.

    Good morning Bloodborne, and welcome to the Best Buy forum,
    I can understand having questions being that you are new to the My Best Buy program, which is why I am here!  I would definitely suggest reading over the Program Terms just so you have a better understanding of how certain aspects of the program function; however, please do not hesitate to create a thread on the forum or to send me a private message if you have future questions about your account or the My Best Buy program.  I am always happy to help.
    When it comes to an eligible purchase it may take 3 to 5 days for points to emerge as pending and an additional 15 days for points to officially post to a member's account, so up to 20 full days before you have access to points.  It is unlikely a purchase will emerge as pending the same day it was processed.  You can check pending points by logging into BestBuy.com, clicking on "Account" at the top of the page, and then by clicking on "Purchase History."
    After using the email address you registered with the forum to review your information, I did find that you currently have two My Best Buy accounts.  I would suggest that we merge those two accounts in-order to make it that much easier for you to keep track of your points/certificates and purchase history.  As long as the information shared by your two accounts matches, then I should have no problem merging them.
    With that all having been said, I will need some additional information from you before I can look into merging your accounts.  Please send me a private message with the below information and I will see what I can do to further assist.  If you have any other questions about the program, then feel free to also put them in your private message.  You can send a private message by clicking on the blue button in my signature labeled "Private Message."
    Name
    Phone #
    Mailing address
    Email address
    Merging My Best Buy™ Accounts
    Thank you for posting and for signing up for the My Best Buy program.
    Derek|Social Media Specialist | Best Buy® Corporate
     Private Message

  • During movie rental I got an error -50, will not allow me to download the rest of the movie, any help?

    Cant seem to be pass Err= -50, anyone know how to overcome this error?

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in theSpecific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • PS Validations - Using a subset of a field not allowed?

    Dear All,
    We are in ECC 6.0 and I am trying to create a PS Validation to check between
    Project Profile vs PROJ-PSPID :1-1: (1st character of the Project Number)
    However I am getting GGB520 error : "Conditions cannot be edited with the formula editor". This leads me to OSS Note 167634. However It is not clear how to achieve a validation by using subset of a field. The corrections are not valid for ECC 6.0 and earlier in ECC 5.0, I have done such validations successfully. 
    Can you  please clarify, what should I do? We don't want to go to user exit validation route.
    Thanks,
    Regards,
    Davit

    Hi Davit,
    I had put something like same validation in my one project ans it is working . this validation will restrict the project code of a certain project profile in a certain range.
    same way we can put the validation of project code validation with project profile.
    Prerequisite
    PROJ-PROFL = 'Project Profile Code '
    Check
    ( (PROJ-PSPID : 3-6 : >= ' 1000 ' ) AND (PROJ-PSPID : 3-6 : <= ' 1999 ' ) )
    Message
    Project Code is not in defined range.
    rgds
    Rajesh

  • What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    It means that iDVD has found a problem with one of the movies added to the project.  Did you edit the movie after it had been added to the project.
    Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • My apple tv seems to have hung up during the latest software update - what should I do now?

    my apple tv seems to have hung up during the latest software update - what should I do now?
    I have not turned it off but it has been stuck in the same spot for 30 minutes now and I'm not sure what to do next since the screen says to NOT turn it off until done. Please help.

    If it hangs much longer you may need to disconnect and then grab a micro USB to restore through iTunes
    http://support.apple.com/kb/HT4367

  • In working on a simple home budget,  how can I change the color of a negative number to red,  during the period the number is negative.    Thanks,

    Using Numbers spreadsheet and In working on a simple home budget,  how can I change the color of a number to RED when it  comes up negative.  (only during the time that it's negative)  Thanks,  ( I hope I did this right!!) 

    The Inspector offers choices of format for negative numbers when you choose Number of Currency as the format for a cell. Also offered when the format is set to Automatic, IF the selected cell(s) contain number(s).
    The choices are in the pop-up menu beside the box for number of decimal places.
    Regards,
    Barry

  • I use my MacBookPro sporadically during the day.  Should I shut it down or put it to sleep during the day?

    I use my MacBookPro sporadically during the day.  Should I shut it off after each use or put it to sleep?

    You will get various answers to this type of question.  Everyone has their preferences.  Read the user manual that came w/your MBP for sleep & shut down recommendations. 

  • HT201413 i tryed to restore my phone but it turns of during the process and an error happens so what should i do

    i tryed to restore my phone but it turn off during the process and an error happens so should i do ?

    Hello there, VladlsSwag.
    The following Knowledge Base article provides some steps for troubleshooting your issue:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Particularly:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • When I input my serial number to activate Photoshop CS4, it said the number is invalid. However, the customer service of Adobe told me that the number is valid. What should I do?

    When I input my serial number to activate Photoshop CS4, it said the number is invalid. However, the customer service of Adobe told me that the number is valid. What should I do?

    Error "The serial number is not valid for this product" | Creative Suite

  • Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore the Iphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?

    Good afternoon. I have a problem. During the upgrade Iphone 4 c IOS 4.3.5 to 5.0.1, I pulled the cord. Now I can not restore theIphone. Just lost imei, Wi-Fi, and phone became unusable. What should I do?

    See if you can force the phone into recovery mode:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

  • HT6114 My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour.

    My iMac seems to have frozen during the update- how long should I expect the update to take? The 'installing software update' bar is still showing itself working but has been stuck in the same position for over an hour. Any thoughts?

    Update2: There is something very wrong with wireless on mountain lion recovery. I don't know what the problem is, but this link may explain:
    http://osxdaily.com/2012/08/10/os-x-mountain-lion-10-8-1-beta-released-for-dev-t esting-may-include-wi-fi-fix/
    Wireless recovery would start out with over 25 hours estimated and kept on failing. It turns out to be a two step process of downloading a few Mbytes then a 4Gbyte .dmg file, but I couldn't even download the Mbyte file. I bought the thunderbolt to gigabit ethernet adapter, plugged it in, restarted recovery and download of a little more than 4Gbytes took less than an hour. My limiting factor was probably comcast home internet rate of 12Mbps. The wi-fi wireless connection should be able to do over 100Mbps, so wireless shouldn't be much slower than wired, except wi-fi wireless is broken. Now that ML is installed and updated, wi-fi seems fine now, as I am using it right now, but I haven't tried downloading a big file yet.
    Don't use wi-fi wireless for Mountain Lion recovery.

  • My iphone is a 3g and I was updating it's sofware from 4.1 to 4.2 when an error called 1604 occured during the restoration. what should i do?

    my iphone is a 3g and I was updating it's sofware from 4.1 to 4.2 when an error called 1604 occured during the restoration. what should i do?

    Shifaau wrote:
    now an error code by 1015 comes up.
    Again...Search the forums or Google for the error message appearing and follow the troubleshooting steps provided.

  • HT1414 i can't complete the iphone with ios 6 my car is not valid and what should i do ?

    i can't complete the iphone with ios 6 my car is not valid and what should i do ?

    Try rephrasing your question.
    What does your card have to do with it and how do you complete a phone with ios 6?
    What exactly are you doing, and what is the exact message you're getting?

  • During the last week my Iphone has been switching off/on on its own and now my Iphone got stuck at the apple logo.What should I do?

    During the last week my Iphone has been switching off/on on its own and now my Iphone got stuck at the apple logo.What should I do?A month ago it also happened but then everything got back to normal.A person told me to change th display...what should i do?please help!

    Hey adinat,
    Welcome to Apple Support Communities! I would go through the steps in the iPhone troubleshooting assistant and see if that resolves the issue you're experiencing on your iPhone 5:
    Frozen or unresponsive iPhone
    http://www.apple.com/support/iphone/assistant/phone/
    Regards,
    David

Maybe you are looking for

  • Premier Pro CC stops after 1 minute during playback.

    I have beeen editing a movie shot on a Canon 5D Mark II for the past couple months. Everything has been great.... but today CC stops during playback after 1 minute. It doesn't matter where in the 30 minute timeline I click. The footage I have reviewe

  • Which is the best way to parse nested XML

    Hello, I am just getting back into using ColdFusion and I am working on a project that needs to parse some XML. The XML is generated by a third party document. I figured out how to grab individual values and such, but I'm not sure what is the best wa

  • Using ipod charge adapter with an iphone?

    I was wondering if the ipod charge cable is compatiable with my iphone and vice versa? The man at att said no. What can someone else tell me about this question?

  • Cancelling online number but want call forwarding

    Hi, I have a Skype online number that is about to expire. I don't really need this number anymore, so I don't want to renew my subscription. However, I don't want someone calling the number I used to have and receving a "this number does not exist."

  • Manually attaching the output type every time

    any  setting in the system so that required layout is defaulted in the invoices The user is manually attaching the output type every time.