During the work update error
I have a problem during a work update shows me this problem ..... shows me an error message(the iphone could not be restored an unknown error occurred 47) !!!!!!!!!!!!!!!!!! iphone 5s
Hi ayman resh,
I'm sorry to hear you are having these issues with your iPhone. If you continue to get errors when trying to restore your iPhone, you may find the troubleshooting steps outlined in the following article helpful:
Get help with iOS update and restore errors - Apple Support
Regards,
- Brenden
Similar Messages
-
My Iphone 4s just stopped during the latest update and now the screen show the Apple icon and an white bar beneath. I can no longer get anything to work on the phone!! Where to from here??
You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them. -
I get this message: An error occurred during the installation process: error occurred while installing additional adobe packages. when trying to install CS2 InDesign UPGRADE from id 2 on new IMAC 2.4 GHz 4 GB. Any one else with same issue? Trevor
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? (For example, 8007000B.) -
Tiger freezes when screensaver runs or any time during the work
Hello everyone!
After I've connected LaCie external hard-drive, Tiger freezes every time screensaver runs. Sometimes it happens at any point during the work without any reason. I can move the mouse (when screensaver is on, though, after I moved the mouse the screen would go blank). LaCie works great and I don't think the problem is in it.
Also, right before this started I'd installed the Mac OS X 10.4.6 update. May be that is the reason. I don't know. I did what is in http://discussions.apple.com/thread.jspa?threadID=487116
In particular, I re-installed Mac OS X 10.4.6 combo update - it won't work. I've done permissions repairment, disk repairment, etc. Disk didn't require any repairments.
I tried disconnecting LaCie it won't help as well. What else might be done before I re-install Mac OS X itself (which I really don't want to do).
Regards,
Sergei
eMac PPC G4 1.75 GHz 768 MB Mac OS X (10.4.6)Since you've restarted and hard reset, the next step is to restore it. Make sure you have it backed up via iTunes and then setup as new.
-
I cannot download the new update - Error code: 43
I cannot download the new update - Error code: 43 -- what does that mean?
Hi Arjun,
From the cc app the preferences option is greyed-out, so I'm not able to sign out and in... yes I'm aware I'm able to update from the app directly. The issue I found in the past is when I updated Lightroom from Lightroom itself, the cc app did not see it as being updated... still saw it as the earlier version. So the app said there was an update and I was trying to go into cc to perform the update instead of the app....
Would be interested in hearing more about the error 43 from Adobe...
I'm attaching two screen shots, one of the error and the second of the greyed-out preference option.
Thanks,
-Erik -
Itunes has frozen during the ios update
my phone and itunes has frozen during the ios update. how do i resolve this?
Hello LAUANS01,
After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning device issues:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD -
HT4972 how to save the app during the software update..??
i would like to update my iphone, i just wanna to know how to save the apps during the sowtware updates.
i would like to update my iphone, i just wanna to know how to save the apps during the sowtware updates.
-
HT202157 what do i do if apple tv is frozen during the software update?
what do i do if apple tv is frozen during the software update? It is mid-way through the Step 1 of 2 Preparing Update but indicates not to unplug the Apple TV while updating?
connect to a computer by usb and require the firmware of the appletv
-
Error while posting the Idoc 'Update error, transaction VA01'
Hi Gurus,
When an inbound Idoc for sales order is trying to post we are getting the error 'Update error, transaction VA01'.
Aslo following are the details of the error:
Update error, transaction VA01
Message no. 00377
Diagnosis
An error occurred in CALL TRANSACTION USING or CALL DIALOG USING
during a synchronous update.
The error was caused by the transaction VA01.
Update information
Return code: 009
Text : Error during insert table FPLTC (RC= 1, Key= )
Procedure
Pleas analyse your Batch-Input data.
You can also examine your posting data using the transaction SM13.
Can somebody let me know what would be the cause.
Also the we are trying to post the Idoc with a Id which is having maximum Authorization.Hi,
Where you able to resolve your issue, I would appreciate if you can share the solution.
Thanks -
I updated my iPad 2 through iTunes. During the updating process, all of my apps that were gifted were deleted completely from my iPad and iTunes. There is no record of me purchasing these apps since they were gifted. The app that was critical was Docs to Go which I have been using for my business accounting. Is it all really gone?
Thanks for any help/advice.Apps were gifted? How did you get them?
Purchased apps are associated with a specific Apple ID. Your iPad and your computer have an Apple ID associated with them. If you connect to your computer to sync only those items associated with the Apple ID on your computer will remain on your iPad. -
Has anyone else experienced this?
Ok. Have you tried a different micro usb cable? If possible try another computer. Or take the unit to Apple. It could be a hardware issue and you can see about a replacement.
-
Error during the work with KPI from MSAS 2012.
Good afternoon. You couldn't help me.
At me it is established on the Sharepoint 2013 SP1 Enterprise Trial server. On other MS SQL 2012 SP2 and MSAS Multidimensional server.
I configure Sharepoint 2013 BI features and PerformancePoint Services.
Also it was connected to the cube. All dimensions and measures are visible and I can work with them and create reports and dashboards.
But I can create in Scorecards only new KPI on the basis of my measures. In attempt of import already existing in Analysis services KPI's there is a mistake : (from system log)
There was an unforeseen error: 13365.
System.IO.FileNotFoundException:
It is impossible to load the file or assembly "Microsoft.AnalysisServices, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
or one of components, dependent on them. It isn't possible to find the specified file.
File name: "Microsoft.AnalysisServices, Version=10.0.0.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91"
in Microsoft.PerformancePoint.Scorecards.Server.ImportExportHelper.GetImportableAsKpis(DataSource asDataSource)
in Microsoft.PerformancePoint.Scorecards.Server.PmServer.GetImportableAsKpis(DataSource dataSource)Hi,
Please try following the note 206168. which tells you to change the r3trans.
If you have changed the r3trans earlier, then try using the same r3trans as provided in the kernel CD.
Hope this helps
Regards,
Imran -
As I mentioned, there is an error while trying to update photoshop, camera raw, etc. I receives message when you try to download the update, an error occurred. Exit and try again later.
What to do? Without Camera Raw update I can't open Raw files from my cameras. Guy from chat on adobe website just give me link for support website, it's ridiculous.abdzi schrieb:
Hi,
Finally I made an update. I used download files from Adobe update pages (the same websites that were offline for few days), I couldn't do it automatically from PS CS5 application. Last problem is Adobe Extension update, can't do it automatically and manually becouse there are no update files for Adobe Extension CS5 for Windows (only for Mac). Most important is that my Camera Raw can open files from my cameras now. Thank You for your help.
Hey abdzi could you give a short explanation were you found which download files?? I have the same problem and realy need the Camera Raw update. Please!! Thank you -
Interrupted my iphone during the new update, now phone is messsed up.
I was trying to update my Iphone 4 to the ios7, I was getting impatient and interrupted the update. My phone was showing a usb port needding to be plugged into itunes, so i tried that and nothing worked. I am still getting that screen. I even tried calling Verizon and gave me no help except said that recieved many calls about this issue. I tried turning my phone off and noting is working, i need help.
You have to understand the difference between an Update and an Upgrade.
An Update is a free change within an existing Operating System. Such as the .8 added to 10.5.
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 code was written to be able to run on both Power PC and Intel. 10.6 has completely rewritten code and only runs on Intel Macs.
You have to upgrade to 10.6.8 to be able to download iTunes 10.7. The Snow Leopard 10.6 DVD should still be available at this time from Apple for $20. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775 to purchase it. It may still be in the Legacy Products list. The App Store which is required to download 10.7 Lion or 10.8 Mountain Lion is part of the 10.6.6 update.
If you wait to long and they no longer have any in stock you will have to buy it from eBay or Apple resellers that still have stock. But you will have to pay a premium since the DVDs are no longer being made. Snow Leopard DVDs are already up to $100 on Amazon.
http://www.ebay.com/sch/i.html?_nkw=10.6+snow+leopard&_sacat=0&_odkw=mac+os+10.6 &_osacat=0 -
My iPhone is not working at all ;
When I upgraded to IOS7 my battery died when it was installing half way through.
Ever since it has been dodgy but last week it just turned off and wouldn't boot at all.
When I try to turn it on without a power adapter it does not work but when i plug my power adapter in,
it comes on but loads onto apple logo then onto the cable into itunes i've plugged it into itunes and it gets so far then it
comes up with an error (23).
CAN SOMEONE HELP ME I DESPERATLY NEED MY IPHONE WORKINGReset the device by pressing and holding the home and power buttons for 15-20 seconds until the white Apple logo appears.
Maybe you are looking for
-
Can a single Access Point support both bridge mode and Access Point mode at the same time
Hi Guys Does anyone know which access point can work in both bridge mode and AP mode ? Cheers
-
CS6 update 13.0.5: "This patch is not applicable for you."
I tried to install Photoshop_CS6_13_0_5_upd.dmg and got: Update Failed Updates could not be applied. This patch is not applicable for you. I bought Photoshop CS6 as a download directly from Adobe, installed Photoshop_CS6_13_0_1_upd.dmg without proble
-
Adobe Audition, Audigy 2 ZS Platinum, can no longer hear guitar :-\
I've recently reformatted my computer, installed the Audigy 2 software, and installed Adobe Audition. Using Line In 2 on the front of my pc, I was able to plug in a guitar, and hear the guitar via headphones. I can use the remote's record button to i
-
URLConnection does not create file
Hello, I have a server and I'm using URLConnection to create a file on the server and write some text into it. However, after I run my program, no exception is thrown, but also no file is created on the server!!! Here is the source code: URLConnectio
-
Summary field printing on the first line when it supposed to prin last page
i have created manual report. in the end of the report i have summay columns. wheni run in oracle reports it perfectly shows the grand totle. when i generate to file (PDF) thegrand total print on the first line. can some one tell me wht is it printig