During upgrade iOS to 5 I got error 402636789, what to do in order finally upgrade

That hap end after the program was stopes with error 402653077 and I use the advice to start the connection to iTunes while pressing on the start botton .

Back up your system, order a Mac OS X 10.6 DVD from the online Apple Store, and if desired, purchase more RAM and then order a download code for 10.7 by phoning them.
(75714)

Similar Messages

  • I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50).  How do I fix this?

    I repeatedly receive an error when my IPad is trying to restore during the IOS 5 update. The error is (-50).  How do I fix this?

    Try restarting everything and then try to sync or reactivate. Quit iTunes, reboot your computer, reboot your iPad and then try again.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • TS3694 i am trying to update my iphone 4 from ios 5 to ios 6 but i got  error 6 anyone had same problem?

    i am trying to update my iphone 4 from ios 5 to ios 6 but i got  error 6 anyone had same problem?

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • I have applied supportpackages in wrong order.I got error. What can I do?

    I have applied supportpackages in wrong order.I got error. What can I do?

    When you install the support packages, the system check the dependencies between the support packages, if does not exist problem, the process continue, if not you can not import the support package.
    Describe the problem and the error message, to help you.
    Regards

  • I tried ugrading to the ios 5 today and got error code 1 and now my phone wont turn on. happen to anyone else?

    any suggestions?

    Restart computer, open current iTunes on computer, connect iPhone to computer with USB cable, hold both home and power buttons for about 20 seconds until iTunes reconizes iPhone in Recovery Mode, click Restore button of iTunes.

  • I got ERROR 18 ,,,,what i have to do

    Hai guys,
           When i monitoring the ODS to CUBE..i got further updating problem...
           error descrptions are
               Error occurred when updating data from ODS object FAO26_Q4     
         Error records written to application log          
                    Error 18 in the update     .
      I am getting data from One infosource then -
    4 qurater ODS 's -
    4 quarter cubes
      I got this proble when data updating from ODS to Cube
    Thanks,
    Prasanna

    Hi Prasanna,
    Error 18 is due to invalid characteristics.[Even lowercase letters could be recognised as invalid chars by the system if u havent checked that option in ur info object definition].
    Check the replies of Sankar & Dinesh in this thread
    URGENT : ERROR 18 while updating the Infocube from ODS....
    Regards,
    R.Ravi

  • TS3694 my iphone crashed. tried to restore and got error 2009. what can i do?

    ??

    Try  these troubleshooting steps.
    If that Article did not resolve it... then perhaps a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required..
    Be sure to make an appointment first...
    Note:
    That error message may be indicative of the Device being Hacked / jailbroken.... If this is the case then you are on your own.
    Unauthorized modification of iOS...
    http://support.apple.com/kb/HT3743

  • Update to iOS 5.0 got error 14

    Hi y'all,
    So I tried to update my iPhone 4 to iOS 5.0 and got error 14... So I thought it can be because it had iOS 5.0b7 (I've got a dev acc) on it, but I think it wasn't.
    I tried it on 3 different computers (Mac Mini (Lion 10.7.2), MBP(Lion 10.7.2),  Windows 7) and used 5 different iPhone cables, so... I also have/had a problem with downloading iOS 5.0 trough iTunes because on the end it says that the file has been corrupted like everything (again 3 different computers), so I tried it alot. Eventually I went crazy because I couldn't get my iPhone out of restore mode after 6 hours...!(Bricked) Then I thought about installing iOSb6 that worked but the software was expired he said so I now have iOS 5.0GM on it.
    I tried the same with my dad's iPhone (4.3.3) on his laptop and got the same error... So his was also bricked.... I restored his also to iOS 5.0GM but I know it will eventually expire...
    So my question was what do I do about this can I do an OTA from iOS 5.0GM to for example a future release like iOS 5.0.1 (or something like that). Or is there another solution?
    Thank you in advance,
    Kind regards,
    Delano

    Hello there I just thought I would let you know that iOS 5 GM is the final version, that is the same software everyone is running... It should be build number 9A334... Yes as soon as 5.0.1 comes out you will be able to update OTA.... Hope this helps

  • Errors in DDIC Activation phase during upgrade.

    Hi,
    Title: Errors in DDIC Activation phase during upgrade.
    During preprocessing phase (phase ACT_UPG) we got many DDIC activation errors such as:
    SAPup broke during phase ACT_UPG in module MAIN_SHDRUN / Shadow System Operations: SPDD and Activation.
    DDIC ACTIVATION ERRORS and RETURN CODE in SAPACCI702.CPE
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    1EEDO519 "Data Element" "/BI0/OICH_AT" could not be activated
    1EEDO519 "Data Element" "/BI0/OICREA_TIME" could not be activated
    1 ETP111 exit code           : "8"
    We have searched the SDN, many posts say that we have to just activate them. But my question is where - in source system OR in Shadow system?
    We assumed it is Source system (please correct if it is wrong), unlocked the system and logged in as normal user and tried to activate the Data Element. Now, it says "Search Help /BI0/OICH_AT is not active or contains no parameter".   How to go about it?
    If it is Shadow System, how can i unlock the system?
    Many thanks,
    Mohan.

    Dear Mohan,
    There are search helps configured for the dataelements in ACTUPG.ELG. These search helps were created by mistake by the system.
    The search helps can be deleted manually in the shadow instance.
    In this case you should remove these fields in se11 (in your shadow instance) as the Search help shouldn't exist.
    You should do this step for all data elements shown in the log ACTUPG.ELG:
    For example: SE11 -> /BI0/OICH_AT -> Change -> Tab "Further characteristics"
    1. Goto SE11:
    2. Select Data type and fill "/BI0/OICH_AT" and display
    3. Select the tab "Further Characteristics" and
    4. Remove the values for fields "Name" and "Parameters"
       then click on icon "Activate"
    Please do the same for the other object.
    But before performing above steps you need to unlock the shadow instance by the following command:
    SAPup unlockshd <SID>
    (if using SAPup)
    SAPehpi unlockshd <SID>
    (if using SAPehpi)
    Also do not forget to lock the shadow system again after performing the steps and continuing the upgrade by the following command:
    SAPup lockshd <SID>
    (if using SAPup)
    SAPehpi lockshd <SID>
    (if using SAPehpi)
    You can logon to your shadow system with any different user than DDIC.
    Best Regards,
    Abhishek
    Edited by: Abhishek Srivastava on Oct 17, 2011 6:26 PM

  • Error during upgradation

    Hi,
      During upgradation I got error at SACT_700 with following log
    Activate lock object "E_BAMMAPNG"
    4EEDI751 Base table "BAMMAPFCGR" of the lock object is not active
    4 EDI813 Lock object "E_BAMMAPNG" not activated
    4 EDI806XActivate lock object "E_BAMUIBT"
    4EEDI751 Base table "BAMUIB" of the lock object is not active
    4EEDI751 Base table "BAMUIBT" of the lock object is not active
    4 EDI813 Lock object "E_BAMUIBT" not activated
       When I looked at the base table it is already active.
    And also with the following error log
    Activate search help "Z_KSTAR"
    4EEDH163 Search help parameter "SPRAS" does not occur in the selection method
    4WEDH187 Default value "'EN'" does not suit the type of search help parameter "SPRAS"
    4 EDH109 Search help "Z_KSTAR" was not activated
    4 EDH102XActivate search help "Z_SKA1"
    4EEDH163 Search help parameter "SPRAS" does not occur in the selection method
    4WEDH187 Default value "'EN'" does not suit the type of search help parameter "SPRAS"
    4 EDH109 Search help "Z_SKA1" was not activated
    but when I checked the search help it is consistent  & I want default value EN to be specified.
      EDT402 Append structure "ZAKKAPARA_TA" appended to table "KKAPARA_TA"
    4WEDT191 Enhancement category "3" possible, but include or subty. not yet classified
    3EEDT963 Field "MAKTX" in table "KKAPARA_TA" is specified twice. Please check
    3 EDT015 Dependent table "KKAPARA_TA" was not activated
        but the field MAKTX is specified once in KKAPARA_TA but from appended structure  ZAKKAPARA_TA.
    Regards,
    Karthik.k

    Hi Karthik,
    Kindly check the versions of  E_BAMMAPNG and E_BAMUIBT. if you find Modif and Active version, then lock objects are not in active mode.
    open the object in edit mode, check the object and activate it.
    in search help Z_KSTAR and Z_SKA1, check if SPRAS is used as IMPORTING and/or EXPORTING parameter. remove the check of IMPORTING or EXPORTING parameter, save and activate the search help
    MAKTX is available in KKAPARA_TA, hence remove it from ZAKKAPARA_TA. save and activate the structure and table.
    after each modification, adjust and activate the database.
    regards
    Rahul.

  • After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

    After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
    VIBAC

    I downloaded and installed
    OS X Lion 10.7.5 Supplemental Update
    and that solved my problem completely. (368 AU plugins now works!)

  • Error while runnning autoconfig on apps tier during upgrade

    Hi,
    Error while runnning autoconfig on apps tier during upgrade from 11.5.9 to 11.5.10.2
    below is the error message.
    Enter the APPS user password :
    The log file for this session is located at: /u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
    AutoConfig is configuring the Applications environment...
    AutoConfig will consider the custom templates if present.
    Using APPL_TOP location : /u01/app/tinst/tinstappl
    Classpath : /u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/jre/lib/rt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/dt.jar:/u01/app/tinst/tinstcomn/util/java/1.6/jdk1.6.0_18/lib/tools.jar:/u01/app/tinst/tinstcomn/java/appsborg2.zip:/u01/app/tinst/tinstcomn/java
    Using Context file : /u01/app/tinst/tinstappl/admin/TINST_dba5.xml
    Context Value Management will now update the Context file
    Exception in thread "main" java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
    at oracle.apps.ad.util.DBUtil.registerDriver(DBUtil.java:153)
    at oracle.apps.ad.util.DBUtil.<init>(DBUtil.java:102)
    at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.getDBConnection(FileSysDBCtxMerge.java:759)
    at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.initializeParams(FileSysDBCtxMerge.java:147)
    at oracle.apps.ad.tools.configuration.FileSysDBCtxMerge.setParams(FileSysDBCtxMerge.java:128)
    at oracle.apps.ad.context.CtxValueMgt.mergeCustomInFiles(CtxValueMgt.java:1762)
    at oracle.apps.ad.context.CtxValueMgt.processCtxFile(CtxValueMgt.java:1579)
    at oracle.apps.ad.context.CtxValueMgt.main(CtxValueMgt.java:709)
    Caused by: java.lang.ClassNotFoundException: oracle.jdbc.OracleDriver
    at java.net.URLClassLoader$1.run(URLClassLoader.java:202)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:190)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:248)
    ... 8 more
    ERROR: Context Value Management Failed.
    Terminate.
    The logfile for this session is located at:
    /u01/app/tinst/tinstappl/admin/TINST_dba5/log/05031134/adconfig.log
    Please let me know your suggestions to resolve this issue.
    Regards,
    Sreenivasulu.

    Hi,
    DB tier autoconfig was successfully completed.
    We have already checked the above mentioned metalink ID's, but still the issue is same.
    Can you please advice any other solutions.
    Regards,
    Sreenivasulu.

  • Error during Upgrade from 4.6c to ECC 6.0

    Hi All,
      We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table.  Please kindly help as early as possible. The upgrade process is stuck.
    Regards
    Anil Kumar K

    Hi Anil,
    Is this issue fixed? Can i know how you fixed it?
    replied to your message Re: How to adopt the index changes during upgrade.
    Thanks,
    Somar

  • Error in transaction KEA0 during upgrade

    Dear All,
    During upgrading the custmer system from 4.7 to ECC 6.0 we found some error in the transaction KEA0 while trying to activate the cross client for an operating concern.
    The activation logs says that there are the syntax errors in the gereted subroutine pool: RK2O0100.
    I however corrected the error and activated the code but again when I am trying to execute the same it gave me the same error and when I go to the sub routine pool I found that the changes are again undone and the previos version is activated. This happens repeatedly that the code is corrected and activated by me and says no error and ones I log off and login again it says the same error.
    Help will be appriciated.
    Thanks iin advance....
    Abhi...

    Dear Raymond,
    Thankds for your help..........
    I tring to run RKEAGENV it shows the error message with STOP button saying that the field WTGBTR not contained in the nametab for table CE1E_B1 and when Io run RKEAGENF it gives a short dump saying that entry for CE10100 is not allowed for TTABS.....
    Please help.

  • During recovery on iPhone 4 I got : The iPhone could not be restored. Un unknown error occurred ( 3004 ). Then - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.Then I get error 3004

    During recovery on iPhone 4 I got : The iPhone could not be restored. Un unknown error occurred ( 3004 ). Then - iTunes has detected an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes.Then I get error 3004 again. Latest iTunes and OS updates. I cant use the phone now. I did restart the destop,unplug the usb,...etc. Same iTune logo ,arrow and USB on the screen.THANK YOU SO MUCH,...!

    Perhaps the information in this Apple support article will help:
    http://support.apple.com/kb/TS3694#error3004
    Regards.

Maybe you are looking for

  • OOB feature in SharePoint 2013

    Hi Everyone Do we have any OOB SharePoint 2013 Feature for the below task or any OOB feature which almost performs/resembles the below task. 1) Reminders 2) Job Scheduling 3) To do list 4) Message inbox 5) Weather Forecast 6) Image Upload Regards Pra

  • Scrolling using Scroll Wheel in Adobe Illustrator

    In Adobe Illustrator CS5 I was able to scroll left and right in a document by holding Command and moving the scroll wheel on my mouse. In CS6 I find that holding Command does not toggle the scrolling direction as it had previously done. Holding shift

  • Unicode conversion Project

    Hi, Any one tell me  how to do the Unicode in ABAP ecc5.and explain how to use UCCHECK Tcode.

  • Reg.HTTPs

    Hi, Scenario is SOAP-XI->SAP. Here my sender is having a Webserver(Tomcat). Webserver was configured with SSL. It will communicate over HTTPS to target components(in our case it XI). So, here my question is Do XI need to install any kind of digital c

  • Group by on basis of year

    Hi My oracle version is 11.0. I have to create group by query on basis of load_date ,load_date value is in format 'dd-mm-yy' I have to group on basis of yy only ...not on complete date value. Please help me on that ..thanks