During writing for archiving object FI_MKKDOC, file is not getting created

Hi Experts,
I am new to archiving concept & have one archiving object FI_MKKDOC which i have to complete as soon as possible.
In this i have done all the basic settings & when i am excuting the transaction after putting production variant & scheduling it as immediate with LP01 printer.Job is finished successfully but in the log there is no message for any file creation. I have checked AL11 transaction also, no file is getting generated. Please help, we have configured the logical file ARCHIVE_GLOBAL_PATH and ARCHIVE_DATA_FILE.

dont you have a spool file for this archiving job? This should usually list errors that prevented an item from beeing archived, and if nothing was archived, then no file exists.
When you define a variant for the write step, then select full detailed log in the lower part of the selection screen, especially if it is the first time that you archive with this object.
Further, please read the docu behind the blue info button in the selection screen. This tells you the sequence you have to use for the archiving as well as other important details.

Similar Messages

  • Java file is not getting created in gen_sqlj

    Hi All
    I have cretaed a EJB dc.
    when I creating a .sqlj file, its corresponding .java fiel is not getting created in gen_sqlj folder.
    what will be the reason for this?
    how to create that?

    I've got the same problem. Is there a solution for that?

  • Silent Installation - Respond file not getting created !!!

    Hi,
    I am trying to create a respond file by running the installation as follows
    ./runInstaller -ignoreSysPrereqs -record -destinationFile /backup/ORA_DOWNLOADS/9201.rsp
    ignoreSysPrereqs is used because we have Sun Solaris 5.10 which is not in oraparam.ini.
    I am installing 9.2.0.1 Please do not ask why 9.2.0.1 now.
    Now the problem is my respond file is not getting created when I run the install. Does the respond file gets created after the installation is complete? I do not want to end up doing installation at one server without the respond file.
    Please help.
    Thanks,
    Ankit.

    Hm, you might be hitting a bug. Need to check my archive of historic Oracle events (means, I'll get back when I have looked through my notes in a few hours or more).

  • File not getting created in Target Directory..........

    Hi All,
               We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message  monitoring as well, which is also successful...
    What could be the reason of such behaviour, and is there a way to track the where the target file is getting placed?
    Please Help
    Regards,
    Jayashri

    >
    Jayashri Rade wrote:
    > Hi All,
    >            We are trying a IDOC-File scenario & trying to create a XML file on the receiver side........All the mappings have been checked & everything is working fine.It shows success in SXMB_MONI. But the file is not getting created at the target directory..... Checked the component Monitoring and message  monitoring as well, which is also successful...
    i
    Did you check the receiver communication channel in communication channel monitoring?
    Are there any errors?

  • Residence Times for Archiving Object

    Hi SAP Archiving Experts,
    I am working on an analysis Project.I have finalised the List of Archiving Objects and need the residence times fro each archiving object.
    Can any one let me know the source from which i can get the Standard SAP Recommended / the BEST PRACTICE for taking the Residence Time for the Archiving Objects...
    Mainly : FI, CO , HR Transaction Area Archiving Objects....
    Thanks.Kumar

    Hello Kumar,
    Residence times for archive objects usually differ from company to company as it depends on the needs of the business (and what they will agree to).  Some companies will use a standard residence time across all archive objects to make it easy for everyone to remember.  For example, some companies will use Current Year plus 2 as a base for all of the transactional data.  The technical archive objects (such as idoc's, application logs, etc.), will have a shorter residence time.
    Some of the HR objects will have a 2 year residence time hardcoded into the archive programs which you cannot change.
    The book Archiving Your SAP Data from SAP Press gives some examples of common residence times.  The second edition of this book is now available but I have not seen that yet and do not know if this version provides additional information.
    Hope this helps.
    Regards,
    Karin Tillotson

  • JAR file does not get uploaded to client for my SERVLET generated APPLET

    Some help please...
    I have a servlet that generates the HTML code that contains an APPLET. This APPLET needs a JAR file that is listed under its ARCHIVE property. The SERVLET is in a JAR file that is in the same directory as the other needed JAR file. If I create a static HTML with the output of the SERVLET it works fine. But if go through Weblogic the needed JAR file does not get uploaded to the client so I get a java.lang.NoClassDefFoundError:and my APPLET does not load.
    Q1: I am not sure what to put under the CODEBASE tag. I tried "." and I also tried "http://mymachine" but both did not work. I also tried without the CODEBASE tag. No luck. The SERVLET is bound to http://mymachine/servlet.
    Q2: Does anyone have any suggestions on how to do this? Is there a way to force the browser to upload a certain JAR file?
    Thanks...

    It works!!
    This is what I did:
    The jar file in question was the weblogic.jar. I tried putting it under the lib directory of my war file but I had problems because the weblogic.jar contains other war files inside so when I tried to deploy my war file it also tried to deploy the inner war files which for some reason did not work. So I tried removing the war files from the weblogic.jar and this time I had no problems deploying my war file but I still could not find the classes I needed. So I tried moving the weblogic.jar to the root dir of my war file and it worked!! Now the trick here was: I did not set the CODEBASE AND I had the ARCHIVE paramenter set in TWO places like below:
    <APPLET CODE = "marketmap.client.MarketMapApplet"
    ARCHIVE = "weblogic.jar"
    WIDTH = "657"
    HEIGHT = "382"
    ALIGN = "BOTTOM"
    ALT = "APPLET tag not recognized">
    </XMP>
    <PARAM NAME = CODE VALUE = "MyApplet" >
    <PARAM NAME = "type" VALUE="application/x-java-applet;version=1.2.2">
    <PARAM NAME = "scriptable" VALUE="false">
    <PARAM NAME = ARCHIVE VALUE="weblogic.jar">
    </APPLET>
    Actually if you do not place a parameter named ARCHIVE (at the end) it wil NOT work. I tried with multiple jar files listed and it works great too.
    Anyway I figure I'd share. Thanks for the help too.
    Lastly for people who choose not to upload the jar files to clients, you should look at the bea documentation on applets. It lists a classpath servlet that allows you to provide classes to the clients without having to force them to download the jar file.

  • I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP?

    I recently had a kernel panic in which I think my hard drive only had so much space left after I ran a bunch of drivers I thought I needed. I uninstalled all and moved files. For some odd reason I'm not getting sound of of my hdtv/monitor.HELP? I uninstalled all the drives and apps I download. I moived files either to trash if not needed, and others to other external drives. I went into disk utility and did a repair disk permission and verify disk. Clean out junk files. Now my hdtv/monitor does not give me any sound, nor does my mac mini. Can someone please tell me what to do?

    What drivers?

  • File not getting created in a different server

    My requirement.
    I have written a code in the BI system and now need to write an empty file (say a.done)in a directory /interfaces of PI system.
    I wrote using open data set and close data set however the file (a.done) is not getting created in the PI system even though the directory /interfaces exist.
    When I give any directory of that of BI system ,the file(a.done) is getting created i.e the file is getting created on the same server and not on the different server.
    Is there any function module or any other way for the file to get generated in the PI system.
    Please explain with an example.
    Regards,
    Vish

    Try to use  search FTP in se37 or checkout the below FM
    CALL FUNCTION 'EPS_FTP_MPUT'
      EXPORTING
        RFC_DESTINATION            =
    *   FILE_MASK                  = ' '
    *   LOCAL_DIRECTORY            = ' '
    *   REMOTE_DIRECTORY           = ' '
    *   OVERWRITE_MODE             = ' '
    *   TEXT_MODE                  = ' '
    *   TRANSMISSION_MONITOR       = 'X'
    *   RECORDS_PER_TRANSFER       = 10
    *   MONITOR_TITLE              =
    *   MONITOR_TEXT1              =
    *   MONITOR_TEXT2              =
    *   PROGRESS_TEXT              =
    * IMPORTING
    *   LOCAL_DIRECTORY            =
    *   REMOTE_DIRECTORY           =
    *   LOCAL_SYSTEM_INFO          =
    *   REMOTE_SYSTEM_INFO         =
    * TABLES
    *   FILE_LIST                  =
    * EXCEPTIONS
    *   CONNECTION_FAILED          = 1
    *   INVALID_VERSION            = 2
    *   INVALID_ARGUMENTS          = 3
    *   GET_DIR_LIST_FAILED        = 4
    *   FILE_TRANSFER_FAILED       = 5
    *   STOPPED_BY_USER            = 6
    *   OTHERS                     = 7
    IF SY-SUBRC <> 0.
    * Implement suitable error handling here
    ENDIF.

  • File is not getting deleted in File-RFC-File without BPM

    Hi,
    I'm working on File-RFC-File scenario without BPM. Everything is working fine except file is not getting deleted after the process. I'm passing xml file here and in return it will give the xml success/error message from RFC.
    For the sender CC, I'm passing the following parameters,
    Transsport protocol: File system
    Message protocol: File
    QoS: BE
    Poll Interval: 30 sec
    Mode: Delete
    File type: Binay
    Please let me know if I missed anything while passing the values.
    Thanks,
    Swamy
    Edited by: Swamy Mothe on Jun 15, 2009 8:52 AM

    Hi
    Then , is Sender and receiver File Adapter is using same folder )
    Just a question.
    But having all permisions and above config would delete the file
    can u see the status of u r File Adapter in RWB.? Is it in green?
    rgds
    srini

  • Cs5 camera raw: "this file could not be created" problem

    When I'm attempting to save raw files in any format (jpeg, dng, tiff, etc) to a different directory from where they're intially opened from I get "this file could not be created" error.  It saves fine if goes to the same directory where the file has been opened from.
    The problem started happening for no apparent reason.  There have been no changes to the system (no new installs, etc), except for recent adobe updates, but I can't find any other users complaining about this problem.  This happens on admin and all other accounts.  Any suggestions on how to fix it would be much appreciated.  Thanks in advance.
    photoshop cs5 / win7 64-bit

    Hm, perhaps a folder closer to the root than the folder you have selected has a permissions issue.
    Is the folder you're trying to use rooted on the hard drive (i.e., does the path begin with a drive letter)?
    Keep in mind that whether you are an Administrator or not, with Windows UAC enabled the app is normally not running as an Administrator.  That can affect permissions.  You might want to either try running the app via Run As Administrator or temporarily disable Windows UAC to see if this is an issue.
    How are you starting Camera Raw?  From within Photoshop or Bridge?
    Also, do you have the latest Camera Raw update?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4926
    -Noel

  • BICatalog objects in Webcenter Composer not getting added 2 page

    Scenario: OBIEE 11g integration with Webcenter portal page.
    We are trying to integrate BI Composer to ADF Page for an urgent customer requirement.
    The BI Objects are getting displayed in webcenter catalog. But the dasboard objects when added to ADF page just displays the header.
    There are no error messages.
    The objects/reports themselves are not getting displayed.
    Any idea on this.
    thanks
    Reshmi
    Reshmi Kurup | 022 6718 3633, 9820201095 (M)
    Solution Architect Group, Oracle Financial Services
    Mumbai- GO, India

    did you followed the documentation-
    http://www.oracle.com/technetwork/middleware/webcenter/portal/learnmore/wc-biappsconfig-396418.pdf
    on obiee integration with webcenter ,step by step.
    it should work.
    otherwise you can build your jsr168 portlets and deploy it on any wsrp jsr 168 supported application server and use it in webcenter (ADF ) application.
    if you are facing any trouble in the second approach,then follow the link-
    Deploy OBIEE 11g into WebCenter

  • File not getting created at the Reciever

    Hi All,
    I have implemented a simeple file to file scenario. The file is getting deleted from the source directory but is not getting created in the target directory. It shows a checkered flag in SXMB_MONI . When i do Communication Channel monitoring for the reciever Comm. Channel, it shows no messsages .
    I have refreshed the Cache in Integration directory. it is still not working.
    I tried using a different Communication channel with the Mail adapter that is working fine.
    I cant figure out what the problem is please help.
    Many Thanks,
    Neha

    Hi! Neha,
    Here i want to add some points :
    Even I faced same problem in project....... then I followed this procedure...
    My scenario is FILE TO RFC via FTP Server in file adapter.
    Here issue is file is picking from FTP and showing success in MONI but data is not reaching to BW system..
    Most of the times I checked and I did successfully.
    Main issue are due to:::
    1. Check Queues in Inbound queue SMq2
    2. Trace teh step by step in message flow in message monitoring that means check whether message flows
            from a) Intergration Engine
                   b) Adapter Engine..
    3. Check and trace the flow in Message monitoring in Run Time work Bench
    4. Check Status of Receiver communication Channel in Communication channel Monitoring
    5) Check whether Business Services are Scheduled in Availability Time planning or not
    6  Also Check in Visual admin whether the services are released or not if any others are might using the same servivcees and cahnnels and suppose if they are scheduled or not
    7. Do Cache Refresh mainly SXI CACHE, ADAPTER ENGINE CACHE
    8 Finally if still not resolved J2EE ENgine SOFT Restart..instead of doing restarting entire XIengine server.
    Once the Server is started then defintely all the messages if suppose if 40 messages are picked from source directory and not reached to Target then all those definetely 100% become success and reached
    Note:: All above needs to check only if development part is correctly configured.
    Also check the Receiver target and sender directory Permissions in FTP Server i.e., rwx permissions okay
    Thanks
    Amar Srinivas Eli
    Reward Points if useful

  • Changes to Excel files are not getting updated

    File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
    Other file, another site but similar situation.
    Content changed - form added but next day the change is not reflected.

    Hi,
    According to your post, my understanding is that changes to Excel files are not getting updated.
    I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
    For more information, you can refe to:
    Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
    If you use PowerPivot, you can refer to:
    Refreshing PowerPivot Data in SharePoint 2013
    If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
    You can refer to:
    PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
    In addition, here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • My UIRCallbac​kTable.c file is not getting updated to reflect my changes

    I am using my CVI code in Visual C++ and I removed some fields in the .uir file that had callbacks. The UIRCallbackTable.c file is not getting written to to reflect the change. I am using Clearcase and I have the file checked out. I am getting unresolved external symbol errors for these callbacks as a result. Any ideas on why this would happen?

    Are you using Visual C++ 6.0, Visual C++ 2002, or Visual C++ 2003?
    In each case, Measurement Studio installs a Visual Studio add-in that monitors the .uir file for changes and updates the callbacks file as appropriate. Make sure that the add-in is enabled in the Visual Studio environment that you are using. In VC6, the add-in is named LabWindows/CVI VC AddIn. Go to Tools>>Customize>>Add-ins and Macro Files to enable it. In VC2002 and VC2003, this functionality is part of the main Measurement Studio add-in. Go to Tools>>Add-in Manager to enable it.
    If the add-in is enabled, and updates still aren't happening, please post a .zip file with your CVI project and your VC project so that we can check it out.

  • File is not getting transfered in sm35

    Dear Techis
    I m Executin a BDC thru session method bdc is of Tcode fb01 here i had taken maximum possible Combination of postig keys now problem is for some posting key session ws getting created in sm35 with data and for some posting keys session is getting created without any data..
    And wen i tried to combine different posting keys in one flat file session is getting created but with some missing data
    Can anybody pls help me regarding tckle dis issue..
    Rewards for every helpful ans

    Hi,
        I think for different posting keys different no of fields exist.
    So it will be difficult to prepare a flat file.  Since recording varies from posting key to posting key it may not create record .
    Ex : Ifposting key =4 0 and 50 and the amounts are equal then a document number will be generated.
    Rgds
    Umakanth

Maybe you are looking for