Durring error

Hi
while doing dunning parameter tab, showing error as " issue date deviates 92 days from run date.
Invoice posted on 01.09.07, and dunning run date is 21.09.2007.
what is the meaning of " issue date deviates 92 days from run date.
and last i run the same showing below msg also.
F150-dunning -
Customer account was blocked by dunning run.
please reply.
Thankyou
Anil

hi anil,
I thnk that carry out dunning twice without deleting earlier dunning run,
this same error msg.delete your earlier dunning run and carry dunning again and again.......
Also note that the balance must be over due in balances and then only u can Run the Dunning,
Also check the date for what settings u have given in the Dunning Config.....
Ranjit

Similar Messages

Error in SM59 TCP/IP connection after kernel upgrade to 215..

Hi
We recently upgraded our kernel to patch 215(NW 7.0)..
We built the kernel by first taking the entire kernel stack( level 201) and then patched it with dw, enserver, lib_dbsl, tp, r3trans, r3inlpgm, saposcol with level = 215 except for lib_dbsl, which is 214 and enserver which is 207...
After the upgrade to this new level, we have a SM59 TCP/IP connection which calls an RPG program located in /qsys.lib/..(start on application server radio option), which has stopped working...
Now this RFC doesn't work anymore...
When we test it, it shows us the following:
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host sapdev.ny..... / sapgw00
Error Details     DETAIL: no connect of TP /qsys.lib/rtcimo.lib/RFC000.pgm from host sapdev.ny.....
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 1537
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6255
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Tue Aug 18 23:09:46 2009
Error Details     VERSION: 2
We have another system in which tp is at patch 169 and it works fine...
Looks like something changed with the kernel/tp patch...
doesn't show anything in the sm21 log..in the work process log for dev_rd..
MtxInit: -2 0 0
Mon Aug 17 16:00:47 2009
GwDpInit: attached to gw_adm at 70000008059bae0
DpSetProcessPriority: Run priority for gwrd adjusted to 12
Tue Aug 18 14:35:09 2009
ERROR => GwISearchPartner: timeout, partner LU: >%%SAPGUI%%<, TP: >saphttp< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: %%SAPGUI%%, conv ID: 22575469 [gwr3cpic.c   6225]
Tue Aug 18 17:25:25 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny....., conv ID: 32824524 [gwr3cpic.c   6225]
Tue Aug 18 17:29:30 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, conv ID: 33074744 [gwr3cpic.c   6225]
Tue Aug 18 17:40:29 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, conv ID: 33722803 [gwr3cpic.c   6225]
Tue Aug 18 22:52:39 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
Tue Aug 18 22:52:40 2009
ERROR => GwISearchPartner: HOST: sapdev.ny......, , conv ID: 52504488 [gwr3cpic.c   6225]
Tue Aug 18 23:09:46 2009
ERROR => GwISearchPartner: timeout, partner LU: >sapdev<, TP: >/qsys.lib/rtcimo.lib/RFC000.pgm< [gwr3cpic.c   6212]
ERROR => GwISearchPartner: HOST: sapdev.ny......, , conv ID: 53534925 [gwr3cpic.c   6225]
Has anyone seen anything like this??
Please let us know..
Thanks
sap ques...
Edited by: sap ques on Aug 19, 2009 5:23 AM
Edited by: sap ques on Aug 19, 2009 5:25 AM

This error may be due to kernel patch level. You can try some other patch level. If you can raise an OSS message with SAP, they can tell you exactly which Kernel patch will solve your problem.

Connection Test MDX PARSER - Error

Hi,
I'm installing BPC 7.0 Netweaver.
When I test Connection MDX PARSER rfc in SM59 we get the following time out error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host PLATONTEST016 / sapgw00
DETAIL: no connect of TP mdxsvr from host PLATONTEST016.Platon.dk after 20 sec
COMPONENT: SAP-Gateway
SAP Note 1032461 have been applied !!!
Have anyone an idea solve this issue? Any input welcome!

Hello Brian,
Good Day!
I am also having the same problem and read the same note. But in my case I can't seem to register librfc32.dll in the application server.
This is the error message "C:\WINDOWS\system32\librfc32.dll was loaded DllRegisterServer entry point was not found. This file cannot be registered."
Here is our system details:
ECC 6.0
SAP_BW 700
SAPGUI 710
I am hoping someone will be helping us.
Sincerely,
Nathan
Edited by: Nathan Ray Deluao on May 20, 2009 11:34 AM

Can't release transports - timeoutduringallocate/CPIC-CALL

When I try to release a transport, I get the message:
>Could not start transport control program tp (TP608),
>There was an attempt to start the transport control program tp using the local RFC interface. An error
>occurred here.
>
>Error code: 4
>RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
It suggest running SMGW, but that gives me the message. Gateway monitor is deactivated
I also ran the check transport tool:
>timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time out during connection setup (check that partner exists
SM21 shows:
>Communication error, CPIC return code 020, SAP return code 456
> Conversation ID: 05807275
> CPI-C function: CMSEND(SAP)
>Tp call failed (RFC RC = 4: RFC message = timeoutduringallocate/CPIC CALL:'ThSAPCMRCV':cmRc=20thR...)
456 means: Timeout during conn. setup
I've upped the timeout of gw/cpic_timeout to 2 minutes, and still get the error.
In SM59, the RFC trace shows:
>**** Trace file opened at 20090511 212541 Pacific Daylight Time, SAP-REL 700,0,1
>======> CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
>Timeout during connection setup (check that partner exists)
>ABAP Programm: SAPLSTPA (Transaction: SE10)
>Called function module: RFC_TP_INTERFACE_VERSION
>User: MATT (Client: 001)
>Destination: CALLTP_WindowsNT (handle: 3, 05807275, {E4AC3EDE-FA85-F17B-83FC-001
>Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 3295
>CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456
>Timeout during connection setup (check that partner exists)
>Error RFCIO_ERROR_MESSAGE in abrfcio.c : 1817
So, I've looked at the destination CALLTP_WindowsNT - it exists in SM59. I checked the program location is correct and exists - and I ran it in a windows console. I did a connection test in SM59 and got:
>timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
>ERROR: timeout during allocate
>LOCATION: SAP-Gateway on host SecureBI / sapgw00
Any suggestions?
thanks
matt

Hey, nice to see you are doing some real SAP work too, and not only moderating here (just kidding - keep up the good work).
I suggest you check first if your gateway is up and running. Check the dev_rd trace file for errors (either in SMGW, ST11 or directly in the work directory). Try to telnet to your gateway :
cmd> telnet host1 sapgw00
Trying 10.2.0.1...
Connected to host1.
Escape character is '^]'.
Regards, Michael
Edit: you can also check if you see the process gwrd(.exe)

Unable to open SAP Screen Painter on the current desktop.

Hi,
Whenever I try to open Screen painter through SAP GUI I am thrown with an error message "EU_SCRP_WN32 : timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'". This error has been occurring since I have changed my workstation. When I use my SAP login ID on a different desktop, screen painter is working fine. This means that the problem is not with the SAP login or the SAP server, the problem lies with the GUI or current desktop setting. Please look into this issue and help resolving this issue. Please revert if any further information is required.
I have already tried/checked the below steps:
1. Reinstalled SAP GUI.
2. gnetx.exe and eumfcdll.dll is already present in my system.
3. I have checked the setting, Utilities->Settings->Screen Painter->Graphical Layout Editor (Checked)
The issue is when is tested the RFC conection " EU_SCRP_WN32" it gives me the below error.
Logon          Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host mb5ap1039 / sapgw00
Error Details     DETAIL: no connect of TP gnetx.exe from host %%SAPGUI%% after 20 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 26638
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6226
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Fri Jun 18 11:20:53 2010
Error Details     VERSION: 2
Can anybody help me with the above issue.
Regards,
Smithesh

Hi Rich,
I followed the correction instruction of the note 133903 but didn't work for me .
I am using SAPGui 7.20.
Details: (after replace the files)
ABAP Development Workbench
Release 7.20
Graphical Screen Painter
File Version 7200.0.1300.354
Build 354w209
05 May 2010 / 16 Jun 2010
OS: Windows 7 Professional 32bit
Some times appears the message box: No response from Graphical Screen Painter - Exiting.
On title bar of message box appears: gnetx.exe
Can I do some thing else?
Regards,
Rodrigo
Edited by: Rodrigo Bernardo on Jun 23, 2010 6:36 PM

The execution of report Default Report failed.

Hi,
I am not able to build report on a model. It's giving below error:
Bad request.
Server message:
code: UJO_READ_EXCEPTION_018
severity: error
description: MDX statement error: Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
log id: 051MYooH7kI0ZOwx6K7BGG
DATAVALUE:Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
MDX: SELECT NON EMPTY {[/CPMB/LUDRUQ8 PARENTH1].[2015.01] ,[/CPMB/LUDRUQ8 PARENTH1].[2015.02] ,[/CPMB/LUDRUQ8 PARENTH1].[2015.03] } * {[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_A /CPMB/LUDI9FX] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000011] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000013] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000019] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000056] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000105] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000119] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000128] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000131] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000133] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000142] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000163] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20000167] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20001205] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20001738] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20002012] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20002826] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB20007283] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCB201219BC] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBA0000003] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBA0001738] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBC0000056] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBC0000128] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBC0000133] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBC0001205] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBC01219BC] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBD0007283] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBI0000010] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBI0000142] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBI0001738] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBS0000131] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBT0000119] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBT0002012] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBT0002826] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBW0000011] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBW0000019] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBW0000105] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCBW0007283] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCCJ0000163] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCCJ0000167] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCCP0000013] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCIS0007156] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCOM0007040] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCPL0000439] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCPT0000300] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCPT0000444] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCPT0000500] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCPTBCDL892] ,[/CPMB/LUDI9FX PARENTH2].[BCLIGHT_BCWD0007156] } ON 0 from [/CPMB/LUMCD5I/!!O/CPMB/LUMCD5I] WHERE ( [Measures].[/CPMB/SDATA] ,[/CPMB/LUD331Q PARENTH1].[REVENUE] ,[/CPMB/LUD36EP].[Forecast] ,[/CPMB/LUDO076 PARENTH1].[ncc] ,[/CPMB/LUDSUXO PARENTH1].[NA] ,[/CPMB/LUDOMHU PARENTH1].[CRD] )
V1:Error occurred when starting the parser: timeout d
V2:uring allocate / CPIC-CALL: 'ThSAPCMRCV'
V3:

Hi Vadim,
MDX parser test failed. What should be my next step?
Below is the error message.
Logon
Cancel
Error Details
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details
ERROR: timeout during allocate
Error Details
LOCATION: SAP-Gateway on host SAPBIDEV / sapgw20
Error Details
DETAIL: no connect of TP mdxsvr from host SAPBIDEV.pembina.com after 60 sec
Error Details
COMPONENT: SAP-Gateway
Error Details
COUNTER: 11377
Error Details
MODULE: gwr3cpic.c
Error Details
LINE: 6378
Error Details
RETURN CODE: 242
Error Details
SUBRC: 0
Error Details
RELEASE: 721
Error Details
TIME: Mon Jun 30 10:41:18 2014
Error Details
VERSION: 2

Connection to SLD

HI ,
This is our scenario.We have a ecc 6.0 system we are trying to get that system into sld which is running on host that has only java stack netweaver 2004s.In the process of getting the system into our sld.We have trying to configure these four RFC's
SLD_UC
SLD_NUC
LCRSAPRFC
SAPSLDAPI
when we are testing SLD_UC and SLD_NUC they are working fine.But the other two are not working.
The error log for the other two is shown below.
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host pluto / sapgw02
Error Details     DETAIL: no connect of TP LCRSAPRFC_PPIH from host aquarius.hal.hitachi.com aft
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 16
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6178
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Thu Feb 19 00:21:53 2009
Error Details     VERSION: 2
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host pluto / sapgw02
Error Details     DETAIL: no connect of TP SAPSLDAPI_PPIH from host aquarius.hal.hitachi.com aft
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 17
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6178
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Thu Feb 19 00:51:21 2009
Error Details     VERSION: 2

Hi,
Normally the problem is with the program ID does not match with the one in the PI integration server, or the host and the gateway is not pointing to your PI server.
PI server
1. Go to your PI integration server transaction SMGW
2. Goto -> Logged on client
3. Click on column TP name and sort it accordingly.
4. Check the correct program ID registered over there
Back End system
1. Go to your back end system transaction SM59
2. Match your program ID in your back end RFC destination with the program ID registered in PI gateway.
3. Make sure the host and the gateway name of the PI server in RFC destination is populated correctly.
It did happen to me before, and this is the way to solve it. I am sure it works for you too.
Regards,
Lim...

TCP/IP RFC destination problem

Hi All,
During the RFC destination creation, im using TCP/IP connections.. So please tell me what should be filled for the following fields:
Program
Target Host
Save as          Hostname Ipaddress
Please let me knw what should be the required steps, since when i had provided some information in these fields and tried to test; it gives the following error:
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host DELECC6IDES / sapgw00
Error Details     DETAIL: no connect of TP PROGRID from host DELECC6IDES.bcone.com after 20 sec
Error Details     COMPONENT: SAP-Gateway
Any valuable help?
Thanks
rohith

Dont worry
Sender Port is not mandatory. Only the target port is mandatory
In SM59,
-Have you given the connection type as 3
-In the Target Host, give the IP Address of the target server
-System Number is to be filled
-Now, go to the Logon/Security tab,
-Give the language
-Client
-Username and Password of the destination server
-Now. Save it.
-Test Connection.
Hope the information is helpful

Missing LIBRFC32.DLL file for 64bit - x64 Windows Server

Dear Folks,
I have installed SAP ECC6 with BI7 system on Windows Server 2003 on x64. But I am not able to get data from SAP BW from Crystal Report 2008. I also did MDX PARSER connection test through t.code SM59. I got list of error messages.
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host ns2 / sapgw00
Error Details     DETAIL: no connect of TP mdxsvr from host ns2 after 20 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 798
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 5873
Error Details     RETURN CODE: 242
Error Details     VERSION: 2
I have been read other forums, most probably I am missing LIBRFC32.DLL file for x64 Windows Server. I couldnu2019t find any where this specific file for Windows Server x64 64bit version. It is available on Sap Market place, since I donu2019t have super user rights, I canu2019t download it.
If any one of you already have this file. Please share with me.
thanks
Obaid

Hello Ingo
Thanks to read my problem and for your reply, I have already read that SAP Note 1032461, I have the same problem as clearly defined in the note, and suggesting to put LIBRFC32.DLL file in <windows-dir>/system32 folder.
My SAP ECC and BI7 (Kernl 7.00) is installed on 64-bit, x64 Windows Server 2003 Enterprise. I need to download that file from RFC library available on SAP Market place. But, I don't have any super user rights.
If someone has similar setup and has already that file or could download for me. I need to get that file. I appreciated your kindly help.
thanks
Obaid

Tp configuration not completely distributed

Hey guys,
In the post installation part of the solution manager 7.0 EHP 1. i am getting the following message in the TMS configuration...
"tp configuration not completely distributed
Message no. XT452"
OS = windows NT
DB = MSSQL
on running the tp tool check i got the following
RFC DESTINATION -
> RFC PIN ="timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup "
i tried checking RFC for TCP/IP connections CALLTP_WINDOWSNT
following is the log
logon               cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host arjuna.unisoft.com / sapgw09
Error Details     DETAIL: no connect of TP E:\usr\sap\USM\DVEBMGS09\exe\tp.EXE from host arjuna
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 157
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6282
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 701
Error Details     TIME: Thu Aug 12 18:09:20 2010
Error Details     VERSION: 2
this is the systems gateway trace...
ERROR => GwISearchPartner: timeout, partner LU: >arjuna<, TP: >E:\usr\sap\USM\DVEBMGS09\exe\tp.EXE< [gwr3cpic.c   6239]
ERROR => GwISearchPartner: HOST: arjuna, conv ID: 18550859 [gwr3cpic.c   6252]
so what do i do now ??

Dear All,
we encounter the same error related to an installation of a BusinessObject XI R2. A connection between the BO server and a BI (NW2004s) has been established successfully. The error occurs during the import of a query in Crystal Reports.
Thanks a lot for any helpful comment.
BR
RB

Communication issue between SAP and VERTEX

Hi All,
We are facing connectivity issue with our Intergration system and vertex and below is the error message from SM59.Development and production seems to work fine.Kindly help check.
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host ssapeci / sapgw04
Error Details     DETAIL: no connect of TP /sapmnt/ECI/vertex/translink/verrfc from host ssapeci
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 3114
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6266
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Wed Mar 31 10:42:18 2010
Error Details     VERSION: 2
AIX - 6.1
Oracle version - 10.2
SAP version - SAP ECC 6.0
Edited by: Priyanka Singh on Mar 31, 2010 12:50 PM

Hi my friend
1. Create a TCP/IP Connection RFC <connection> in SM59:
activation type: registered server program
program ID: <program>
2. Create an ini file in directory /usr/sap/<SID>/SYS/profile with content:
DEST=<connection>
TYPE=R
PROGID=<program>
GWHOST=<hostname>
GWSERV=sapgw<nn>
RFC_TRACE=0
Regards,

SAP RFC connection to Vertex

We are facing a problem in getting RFC connection to the Vertex from SAP. We have set up Vertex and we want to make a physical connection through RFC but we are facing erros when we test the RFC connection.
If you would have given us the error message it´s much more likely that we would be able to suggest something. A wrong RFC configuration can lead to a hundred different errors so giving the exact error message really speeds up things
Markus

hi,
these are the errors.
Logon     Cancel
Error Details     timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456 Timeout dur
Error Details     ERROR: timeout during allocate
Error Details     LOCATION: SAP-Gateway on host zepsapd1.zep.asproot.com / sapgw00
Error Details     DETAIL: no connect of TP verrfc.csh.sh from host zepsapd1 after 60 sec
Error Details     COMPONENT: SAP-Gateway
Error Details     COUNTER: 2246
Error Details     MODULE: gwr3cpic.c
Error Details     LINE: 6178
Error Details     RETURN CODE: 242
Error Details     SUBRC: 0
Error Details     RELEASE: 700
Error Details     TIME: Thu Jul 10 10:04:41 2008
Error Details     VERSION: 2
Please let me know for any more information.
thanks and Regards,
Ramesh.

How to recover file with this error?: Errore durante l'analisi dell'indice del documento: invalid character in attribute value

Hello, I have a big problem with my ibooks Author file,
after saved and close file, don't re-open!!
we receive this message: Errore durante l'analisi dell'indice del documento: invalid character in attribute value
please help me!
I redid the file three times

I have solved!!! the problem was on the .mp3 files included on file, after I have converted all the mp3 on mp4 (5 files corrupted was not converted), reload new files on mp4 and all it's ok (saved and closed saved and closed)

Why cant burn dvd message says there where errors durring project validation

when I try to save as disc image I get a message that says errors durring project validation and wont let me burn my project used to work fine.can anyone help

Hi
My thoughts.
• Free Space on Your Start-Up (Mac OS) Hard Disk - How much ?
• Brand of DVD used ?
• Type of DVD used ?
• Video-Codec, photo file format and Audio file formats used ?
There is so much that can go wrong - so we need a lose end to start to unwind the problem.
Yours Bengt W

"fatal error durring installation" when clicking on itunes - help

I clicked on itunes shortcut when i started my PC and it said an error "fatal error durring installation". I've downloaded itunes about 3 times but it wouldn't get fixed.
- help -

Hey there,
Take a look at this older discussion thread and see if it can help you out. Hope it does.
http://discussions.apple.com/thread.jspa?threadID=1255199
B-rock

Durring error

Similar Messages

Maybe you are looking for