Duties are not flowing in ARE3

Hi All,
I created the deemed Export Excise Invoice and also the licence. but while creating the ARE3 document duties are not flowing in ARE3. please guide me
Please note that the duties are flowing  correctly in the Excise Invoice.
Regards

Dear ,
If excise is created without any problem then only problem in ARE3 so please maintain the account determination for this Excise Transaction Type.
Specify Excise Accounts per Excise Transaction
Specify G/L Accounts per Excise Transaction
this u have to maintain properly.
Problem will be resolve if not then please put issue again.
Thanks
Vijay Pratap Singh

Similar Messages

  • Plant & Duties are not flowing in Sale Order

    Dear experts,
    i have an issue in CIN.when i am creating a sales order, plant is not determining automatically,when i am trying to enter plant manually in line item the excise duties are not determining in pricing procedure even though i have maintain  condition records for combination of Plant&Control code.(i have maintained control code in material master also) Please reply.
    Message was edited by: G Lakshmipathi
    Make use of the subject effectively

    First have you searched SCN as to how a plant would be determined in a sale order?  If not, search and close that issue.  Now coming to excise duties, since you entered the plant manually, you also need to click the Update button in condition tab and again double click on "G".  Once plant flows automatically, then this issue would also be addressed.  If not, post here.
    G. Lakshmipathi

  • Depot Sales-Excise values are not flowing from J1iJ to VF01

    Hi Gurus,
    In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference. And the excise values are shown here correctly.
    Issue: In VF01- when we are raising the commercial invoice , the duty values are not flowing from the J1IJ transaction. Instead the values are showing Zero for all the three condition types namely JEXP, JECS and JHCS. We have used the Pricing Procedure ZINDEP and 356 routine.
    Inputs on this how to solve will be highly appreciated.. as we are in critical stage.
    What are the checks to be ensured to Get the values flow from J1IJ to VF01.
    Scenario: STO from Mfrg Plant to Depot and Depot sales to customer.
    Me21N-Me29N-VL10B-VL02N-VF01-J1IIn-MIGO-(STO process completes)-VA01-VL01N-J1IJ-VF01(duty values should flow from the J1IJ referenced Excise Invoice) Correct me if I am wrong.
    Any user exits, Notes please let me know. I could not find any. I have gone through the forum threads, which speaks about 356 routine, J1ID- checks etc.
    Thanks&Regards
    Sreekanth:

    Hi!
    Am sure you would have captured the Excise at Depot with J1IG.
    Also, have you saved the billing document to check the duties? 
    Thirdly, after save, again open the billing doc and go to Header-Conditions then Save. This part does not seems logical, but i am sharing my practical experience.
    Please check condition records if any.
    Regards
    Arun

  • Excise Values are not flowing from J1IJ to VF01

    Hi All,
    I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
    I have gone through SDN, everybody is suggesting about 356 routine.
    My scenario is STO from Plant to Depot and Sale from Depot to Customer.
    ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
    In J1IJ, excise values are coming but in VF01 it is not coming.
    Kindly help me.
    With Regards
    Azeez.Mohd

    Hi,
    in j1ig initial screen which excise group/series group i need to enter
    is it of supplying plant or depot --- Enter Your Excise group
    If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
    it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
    You can also use the Excise Invoice Details tab
    Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
    use Depot Excise Invoice in case of transfer from another depot
    and Excise Inv. Date
    On next screen,
    In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
    Hope this will resolve your issue.
    Regards,
    Krishna O

  • Tax and pricing info are not flowing into Idoc orders02-eledp04 and 05

    Hi,
    We are carrying out SRM5.5 -SUS and ECC6.0 Integration using PI 7.
    We are configuring for the MM-SUS Scenario.
    Now,to accomodate the Tax / Pricing we have installed the add on
    component LOCINSUS and we are having doubts on how to use it:
    1) Tax and pricing information are not flowing into IDOC- orders02
    (e1edp04 and e1edp05 segments are not present in the created IDOC). The
    condition print indicator in checked on ECC System and we have also
    implemented SAP note 995986.
    2)In create ASN transaction , we are not able to see the Excise Invoice
    Number and Date field in Basic data tab as expected from SAP Library
    document although we have installed the Localization Add on component.
    Please help us to reso1ve these issues,
    Regards,
    Mani
    099890-22217.

    Mani,
    Did you resolve this issue, because we are having the same issue in ECC6 with IDoc ORDERS02.
    If you did resolve this issue could you please let us know how, much appreciated.
    Bill.

  • Customer receipts and payments are not flowing into PS module

    Dear Team,
    I am new to the PS module..... Customer receipts and payments are not flowing into PS module. Kindly let me know the missing configuration steps.
    Thanks !!!

    Sagar Kapadia wrote:
    > 1) What is the pre-requisite configuration for activation of Commitments and Project Cash management in the PS system?
    > 2) Is there any word of caution which needs to be kept in mind at the time of activation?
    > 3) once activated, what will the impact on the data? Are there any chances of data inconsistency?
    >
    Only one pre-requisite is the creation of FM area.
    As I suggested earlier, please read SAP help which will answer all your queries.
    Please follow the below path...
    SAP Help Portal >>> SAP ERP Central Component >>> Financials >>> Project System >>> Payments >>> Project Cash Management.

  • Material delta changes are not flowing into CRM

    Dear All,
    material delta changes are not flowing into CRM, because the product hierarchy on material has been changed to a new product hierarchy. I do not want to download again the object DNL_CUST_PROD1 because it maight cause inconstancies in CRM. (I have already defined some z product hierarchies in CRM)
    Do I need to create the new product hierarchy also in CRM manually?
    Appreciate any inputs
    Raj

    Hi Raj,
    Use the transacrion R3AR2 to create a z object for DNL_CUST_PROD1 and assign DNL_CUST_PROD1 as the object name
    Then in request detail screen for new z object enter the details like table name (T179 in your case) and the name of the product hierarchy that you want to bring in. Save the transaction
    Then use the transaction R3AR4 to initiate the download for your new z object as you normally do in R3AS.
    Then go to SMW01 and reprosess the struck Bdoc.
    Reward points if helps,
    Regards,
    Paul Kondaveeti

  • Billing document are not flowing into FI and COPA

    Hello SAP CO gurus,
    please help me out by giving possible reasons why Billing document are not flowing into FI and COPA.
    what are the settings need to check?
    is there any option to get release by manual?
    Initiatives rewards with points........
    Regards
    Chandra.

    Hello Chandra,
    Check whether any standard cost estimate is existing for that material for which your billing. If it is there then check whether costing key from COPA is able to access the cost estimate.
    I am also working on the same issue but not solved yet.
    regards
    Nivas

  • Revenue values are not flowing into COPA

    Dear Experts,
             We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
    May I know the exact reasonu2026.
    Please suggest me in right wayu2026.
    Regards,
    Balaji Bhonsle.

    Hi Balaji bhau
    I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
    See if the Billing Type has been entered in KE4W and the VF reset for it
    Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
    br, Ajay M

  • Duties are not posted in RG23A

    Dear all ,
    We have made GRN but Duties are not posted in RG23A .
    What may be the Possible reasons pl guide

    hi
    what process u have done at time of GRn
    did u selected capture and post at time of GRn
    if not go to J1IEX here select post then material doc no and give req entry and save
    then j2i5 update part 1 and agin in j1iex post the invoice
    regards
    KI

  • Sub Contracting Values are not flowing in to COPA

    Hi,
    PP guy has run Sub-Contracting scenario, later when i see the postings in COPA, those are not flowing into COPA. Amount is showing only in FI.
    510085 Consumption - Subcontracting =800
    520085 Inventory Change - Subcontracting = -5800
    How to bring them into COPA report. Please advise me..
    Thanks
    KB

    Add those cost elements to the automatic account assignment table (t-code OKB9) ans click the profitability segment assignment box.  If using cost based COPA, assign these cost elements to a PA transfer structure (KEI2) so that they are assigned to the correct value field.
    thanks,

  • Project Server 2010 permissions granted through RBS are not flowing through to Project Sites.

    Hi,
    I have configured RBS as "The Project Owner is a descendant of the user via RBS"  its working fine for Projects.
    But users are  facing access denied issue when working with project sites RBS is not working for project sites.
    Can any  one Help me How can i grant permissions Automatically for project sites also as same like projects is it possible ?
    The Members in  Executives group can see all projects in organization but same like can they see all project sites ? 
    I have found one blog of
    RaymondRis he is recommending to do it manually as its not possible to grant Project site permissions Automatically.
    http://blogs.technet.com/b/raymond_ris/archive/2013/05/09/project-server-2010-permissions-granted-through-rbs-are-not-flowing-through-to-project-sites.aspx
    Thank You, Kumar KSV

    Kumar,
    The permissions to project sites is not cotrolled by the RBS, as you have discovered. It is controlled by the Security Category permisisons, and the settings if the permssions are auto synced. The permissions work like this:
    Project managers who have published a project or who have Save Project permissions on a project are added to the Project Managers (Microsoft Project Server) site group.
    Team members with assignments in a project are added to the Team members (Microsoft Project Server) site group.
    Other Project Server users who have View Project Site permission on a project are added to the Readers (Microsoft Project Server) site group. 
    As long as you use the Auto Sync of permisisons for project sites, i do not think there is any work around.
    Cheers,
    Prasanna Adavi, Project MVP
    Blog:
      Podcast:
       Twitter:   
    LinkedIn:
      

  • Excise values are not flowing  in MIGO

    Dear All,
    I am facing a problem during MIGO.
    THERE IS STOCK TRANSFER BETWEEN 2 PLANTS AND 2 PLANTS ARE UNDER DIFFERENT COMPANY CODES.
    1 I have created a PO.
    2.Delivery through VL10D
    3.Picking-vl02n
    4.Created Bill-VF01
    5.Created Invoice and saved it
    When I am doing MIGO the excise values are not following.in migo SCREEN.I I want to know do i need to post EXCISE INVOICE and how to do the same.
    Pl let me know anything is missed out so that excise invoice is not flowing in MIGO screen.
    Regards
    Manash

    Hi,
    Have you miantained Tax code in STO ? if yes, then have you mainatained Settoff as 100% for that Tax Code in FV11 for which combination you are using
    SETOFF Must Be Maintained:-
    JMX1 --     IN: A/P BED setoff
    JEX1 ---      Ecess Setoff Sta
    HX1     IN: A/P SECess SOTot       
    If it is there please follow the Following steps for STO
    1.     Create Purchase Order(STO)  using ME21N
    2.     Create Outbound Delivery using VL10B
    3.     Create Billing Document using VF01
    4.     Create Excise Invoice using J1IIN
    5.                   GR with respect to Inbound delivery and in Excise Invoice give number of VF01.
    Hope Help U !
    Regards,
    Pardeep Malik

  • Dates are not flowing properly into bw

    Hi Friends,
    We have some serious problem. we have few reports on Sales and the data is extracted from r/3 into bw on daily basis. some times the reports working fine other times either the production date or exp date is not flowing into BW or it is giving a vague results that it is displaying sold products as available etc. can any one please help to fix this problem by which no other existing reports get affected and my problem should be solved. please help asap.

    Hi bhagwati
    Please explain the scenario when you are not getting dates....right now we can just guess
    if you getting a X instead of date...this is because of aggregation of 2 or more dates...check your query if you are missing some char in row...
    If you are getting blank then check the restriction of query and put same in infocube display and analyze where is the problem...if it is not coming in query then with same restriction cube also will not display
    Thanks
    Tripple k

  • AED and SED values are not flowing into Order

    Dear Gurus,
    We are using ECC 6 and TAXINJ. We did all the CIN configurations to the best of my knowledge. JMOD is flowing normally. But AED & SED are not. UTXJ is coming as also JIN6 (VAT), E Cess and S&HECess. We dont have Cess in the client's company, so Cess is not to be considered.
    If a check list can be given, maybe I can check my customization with it, since I am an SD consultant and alot of things are involving MM too. Unfortunately we dont have any MM guy with us for the time being.
    Any answers are most welcome.
    Thanks and regards.
    Venkat - Hyd.

    Hi,
    Go to SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Maintain Excise Defaults
    Here check whether AED and SED condition types are assigned under columns A/R AED Cond and A/R SED Cond respectively. If not then assign and check.
    Also check in FV12 for the Tax Code used whether condition record has been maintained as 100 % for AED and SED conditions. If yes then check in J1ID, for "Excise Tax Rate", maintain rates for AED and SED.

Maybe you are looking for

  • Displaying columns in Crosstab report.

    Hi all, I have developed Matrix Report. Output is coming like below.                                                                                                       Current Vol                   OPM Cost                                    Categ

  • Is it possible to load SWF files from an SQL database?

    Hi all, I am very new to flash (I am primarily a C'# developer!) and I have been asked to investigate the possibility of doing the following; Create an application that allows swf files to be uploaded and stored inside of a SQL database as binary dat

  • Placement of return statement

    Hi, I try to make the following bit of code working.     public byte[] generateSignature(byte[] message) {         try{             signature.initSign(keyPair.getPrivate(), randomSource);             signature.update(message);             return sign

  • Why can't I use the bookmarks?

    I have a PDF document which has embedded bookmarks - these show up on my laptop and I also have the bookmark symbol on the iPad. But there is no list of bookmarks when I touch that symbol, just the name of the entire document. Any ideas as to how I c

  • Java.sql.SQLException: No ResultSet was produced

    HCAF_PLCaddEngName = EngiNameTextField.getText();              Connection connection = null;              Statement statement = null;              try                  // Load the JDBC driver                  // Create a statement                  st