Duty value is not flowing in import at the time of capturing j1iex,

Hi freinds,
duty value is not flowing in import at the time of capturing j1iex, after miro for planed del cost
please let me know what are the possible reasons
Regards,
Balu

HI,
Have u given the inputs in J1ID.Have u given the details in Chapter id,Chapter id& Material.cenvat determination etc.
Have u created all the 7 conditions as Planned delivery cost in Cond type.
murugan

Similar Messages

Depot Sales-Excise values are not flowing from J1iJ to VF01

Hi Gurus,
In Depot Sales: while doing excise invoive from T-code J1iJ Go to delivery -RG23D selection select the delivery number XXXXX Excise Group 51 and series Group: 50 ENTER - select the line item and click on F6 and here we have to click on excise invoice Button for capturing the Input excise duties for taking the reference. And the excise values are shown here correctly.
Issue: In VF01- when we are raising the commercial invoice , the duty values are not flowing from the J1IJ transaction. Instead the values are showing Zero for all the three condition types namely JEXP, JECS and JHCS. We have used the Pricing Procedure ZINDEP and 356 routine.
Inputs on this how to solve will be highly appreciated.. as we are in critical stage.
What are the checks to be ensured to Get the values flow from J1IJ to VF01.
Scenario: STO from Mfrg Plant to Depot and Depot sales to customer.
Me21N-Me29N-VL10B-VL02N-VF01-J1IIn-MIGO-(STO process completes)-VA01-VL01N-J1IJ-VF01(duty values should flow from the J1IJ referenced Excise Invoice) Correct me if I am wrong.
Any user exits, Notes please let me know. I could not find any. I have gone through the forum threads, which speaks about 356 routine, J1ID- checks etc.
Thanks&Regards
Sreekanth:

Hi!
Am sure you would have captured the Excise at Depot with J1IG.
Also, have you saved the billing document to check the duties?
Thirdly, after save, again open the billing doc and go to Header-Conditions then Save. This part does not seems logical, but i am sharing my practical experience.
Please check condition records if any.
Regards
Arun

Excise Duty Base Amount not flowing into ARE -1

Dear Friends,
While Iam creating ARE-1 for the Exports Excise Invoice - Excise Duty Base Amount not flowing into ARE1
thanks
Sasi

Dear Lakshmipathi,
Earlier Liable to AT1 is ticked but not Indicator NCCD,I have checked after ticking the NCCD as well....
In my pricing procedure i dont have the NCCD condition .....as its not required.
In classify consditiontypes: I have maintained PR00 condition type as well along with Excise condition types...Do i need to maintain this PR00 anywhere else
or
Is there anything I need to do with the assesable value.......if so how should be the entry like in the pricing procedure?
Can someone please provide me the solution...its very urgent
Thanks
Sasi

Excise Values are not flowing from J1IJ to VF01

Hi All,
I am facing the problem in Invoice to Customer(from Depot). Excise Values are not flowing from J1IJ. I maintained Alt Cal type as 356 in Pricing procedure for Excise condition types. Even though its not flowing. I am using Tax Procedure TAXINN.
I have gone through SDN, everybody is suggesting about 356 routine.
My scenario is STO from Plant to Depot and Sale from Depot to Customer.
ME21N->VL10B->VF01(Proforma)->J1IIN->MIGO->VA01(from Depot)->VL01N->J1IJ(Depot Excise)->VF01(Invoice to Customer)
In J1IJ, excise values are coming but in VF01 it is not coming.
Kindly help me.
With Regards
Azeez.Mohd

Hi,
in j1ig initial screen which excise group/series group i need to enter
is it of supplying plant or depot --- Enter Your Excise group
If i enter material document no say 5000000265 (corresponds to migo-101 at depot )& year
it'm getting error message excise invoice already exists for5000000265 --> Check the Year of material document
You can also use the Excise Invoice Details tab
Enter Vendor's Ex.Inv.No. , enter your STO's Excise Invoice No. and Click on Own factory and enter factory's Series Group in n case of STO from factory,
use Depot Excise Invoice in case of transfer from another depot
and Excise Inv. Date
On next screen,
In case of non availability of Internal Excise No., select the line item and click on button. On next screen, enter Excise Inv. No., Date, Challan Qty, Excise Base value, ensure that Excise Duty rates are maintained in respective duty rates column, you can also manually enter the excise duty amount and press Enter . System will give warning messages, press Enter for each message and press Back button. System will display the excise duty amount, check the same and click on Save button.
Hope this will resolve your issue.
Regards,
Krishna O

Excise base value is not picking for Imports

Dear All,
     Excise base value is not picking for Imports when doing MIGO and BED/E CESS/S&H E CESS also not picking.
          Please suggest me
Thanks,
Tiru

Hi,
In case of Imports, you have to define following condiiton types in MM Pricing Procedure;
JCDB     IN:Basic Custom Duty
JCV1     IN : CVD
JECV     IN : Ed Cess on CVD
J1CV     IN : H&SECess on CVD
JEDB     IN : Ed Cess on BCD
JSDB     IN : H&SECess on BCD
JADC     Addnl Duty of Custom
These should be created as a delivery cost condition in M/06. And assign the accruals to these in M/08.
Folowing Gl Accounts will be assigned to those accruals in OBYC;
CVD Clearing (For accrual of conditions JCV1, JECV, J1CV, JADC) and Customs Clearing (For accrual of conditions JCDB, JEDB, JSDB)
Now follow the below procedure for Import Purchase;
1. ME21N u2013 Create Import Purchase Order (Here assign the Vendor of Customs Office to the above mentioned 7 condition types in "Details" of "Conditions")
2. MIRO u2013 Enter Customs Invoice w.r.t. Import PO (Here select "Planned Delivery Cost" and do LIV for Customs office Vendor, enter values for duties as per Bill of Entry manullay during LIV)
3. J1IEX u2013 Capture Bill of Entry
4. MIGO u2013 Goods Receipt against Import PO
5. J1IEX u2013 Post Bill of Entry
6. MIRO u2013 Enter Vendor Invoice
7. MIRO u2013 Enter Clearing Agentu2019s Invoice

New field in ODS - data value does not flow after activation

Hi,
We have an ODS with some data in it. Now i added a new key figure to the ODS and changed the transfer and update rules accordingly.
The value for this key figure appears in the PSA and the ODS table *40 (before activation table), but after activation the value does not flow to the activated ODS table *00.
Any idea why this is happening?
Pl let me know.
Regards,
Pradhiba

Hi Pratibha
I did not found anything wrong with key figure 0OI_WRBTR in BW system.
Please check the contents of active table in *00 table using SE16 and also using tcode LISTCUBE.
I hope you are not selecting wrong key figure while looking at active data of ODS.
Regards
Pradip

Revenue values are not flowing into COPA

Dear Experts,
We are processing the MTS normal scenario. Here the revenue values are not flowing into COPA when FG sale. But when we process the Raw material Sale values are flowing to COPA smoothly. Here the SD condition Type, Revenue Account and COPA value Field same for RM and FG.
May I know the exact reasonu2026.
Please suggest me in right wayu2026.
Regards,
Balaji Bhonsle.

Hi Balaji bhau
I guess the issue might be with your Item Category in SD.. Is it set relevant for billing??
See if the Billing Type has been entered in KE4W and the VF reset for it
Check in VFX3 if the invoice is lying there for any error.... Try to release the Billing to accounting and you may get the error message
br, Ajay M

Service order/confitimation - plannedvalues/actual values or not flowing

Hi All,
When I am creating a Service contract in SAP CRM an internal order is created with planned values but when I am creating a service order/service confirmations and assigning it to a contract t the planned values/actual values are not flowing on to the internal order
Can you please let me if any specific configuration is missed or required for the above scenario?
Thanks
SK

closed

Accounting document not created at the time of capture and post excise duty

Hi
Accounting document not created at the time of capture and post excise duty
Please explain what the reason
Regards,
Channa

reloved myself

Excise Value Change at the time of Capture Invoice

Hi,
At the time of PO creation dt 02.02.2010, we selected the Tax Code XA with Basic Excise Duty, say, 10%.
When we are doing GR on 01.05.2010, the Basic Excise Duty has been changed to, say 12%.
Where we can make the changes happened in Excise Rate,
Can we enter the actual changed excise duty at the time of Capturing Invoice ?
(Note: I have posted the similar/ related question earlier also)
Please guide.

No,not a standard way as a work around.
Check this link to know about [What is SAP Note ?|http://help.sap.com/saphelp_470/helpdata/en/28/15ef3957fd0a1be10000000a114084/content.htm]
Check also this link [What are SAP Notes? Where do I can find them? How to use it? |http://www.sap-img.com/basis/what-are-sap-notes.htm]
Check also this link to know more about SAP Notes
Re: New SAP Notes in MM
Edited by: Jeyakanthan A on Jun 16, 2010 10:22 PM

I have rented a movie on my ipad. It did not download due to not being on wifi at the time. I know I completed the rental because my gift card balance went down $3.99 plus tax. How do I find where to download the movie?

I have rented a movie on my ipad. It did not download due to not being on wifi at the time. I know I completed the rental because my gift card balance went down $3.99 plus tax. How do I find where to download the movie?

But now I can't find the actual movie...I go to iTunes to purchases and view movies , to downloads and searched the title of the movie...I can see an icon of it and it is in a separate place from other purchases but it says downloaded in faded lettering. Where is it?
If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App

Slider not working around 50% of the time.

Hello,
Slider not working around 50% of the time when I get a call. I hit the sleep button and home button several times and then it works.
I've done the soft reset several times. I've restored settings completely 2 times.
the screen is clean, my hands are clean, the wifi is off, the phone has not been dropped, it only happens when receiving a call and never happens when I'm just turing it on to access the menu. Bluetooth is off as well.
Any ideas?

this happened to me a week or so after buying my iPhone. Fixed it with a reboot... Simul holding home and on/off until apple appears on the screen . Been working for axweek ok now.

IPhone 4S has not been backed up from the time I purchased it

Dear All,
To my recent notice, my iPhone 4S has not been backed up from the time I bought it (4 months ago). After which everytime I go into the <Back-up now> option, it says that 'Last backup could not be completed'. Any suggestions on solving this please
Also the Apps I have on my iPhone 4S doesn't appear on my iPad 3.. What could I do to solve these issues? Please help!!
Thank you..
JCP

Jasper C Paul wrote:
Dear All,
To my recent notice, my iPhone 4S has not been backed up from the time I bought it (4 months ago). After which everytime I go into the <Back-up now> option, it says that 'Last backup could not be completed'. Any suggestions on solving this please
Not with they limited information you have provided so far. Are you backing up to iCloud or to iTunes on your computer? Do you have the latest version of iTunes on your computer? Was it installed from a Windows or Mac user ID that had administrator privileges? Does the phone show up in iTunes? What is your operating system? Are you using a USB port directly on your computer (not a hub)? If it's a USB port on the computer and you have a desktop or tower computer is the port on the back, not on the front?

Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

Tried to restore my mac pro, now it`s not working, can i use the time machine backups?

Yes.

How can I get my time machine to allow me to recover files again? After upgrading to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.

How can I get my time machine to allow me to recover files again?
After upgrading MBA to OS X, the time machine still backs up the files; but, I'm not able to navigate within the time machine or select any folders or files for restore.
I've searched and can not find a solution to the problem that's being encountered.

Yeap that all makes sense now.
Do you only have the current backup showing in the TM display?? Won't it fill in the rest?
Over wireless are you waiting for the indexing to finish.. ??
Previous backup may not show for a couple of hours.
Long short of it.. Mavericks version of TM is a pain.
Sometimes it is easier to completely ignore the TM backup and do the restore manually.
I have posted the details here. See if this helps.
Can't access old files on time capsule

Duty value is not flowing in import at the time of capturing j1iex,

Similar Messages

Maybe you are looking for