DV 16:9 but Only Exports 4:3 WHY? Also Audio Sample Rate Problem

I'm quite new to Final Cut and have FC 6.01. I use PAL 25fps and a 16:9 SD DV Camcorder with FireWire SONY DV VTR Deck. I have two problems:
1. When i capture my 16:9 DV footage the Logging Window shows only 4:3 with a distorted image in it. Though I have chosen the easy set up and told Final Cut that im editing Anamorphic 16:9 I also found that FC will only export 4:3. However, during the editing process i see 16:9 in the Browser Preview and Canvas Window.
2.(Not sure if its related) I get the following message everytime after I capture individual clips or if i press the Escape key during a capture:
"The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your captured preset matches the sample rate of your tape"
Does any one else have this problem?
Apple, as yet have not given me any answers.

Danny Boy.. Thanks for your reply and I'll be happy if it is my fault and not FCP's. Actually i made an error in my post. It does indeed display correctly in DVDSP, it's iDVD it does not even when told to display it in 16:9. However, when i used the PAL DVD Anamorphic file preset, iDVD still couldn't display it. To get it working I had to tell Compressor specifically (in the additional settings) to encode 16:9 despite what the presets stated! No matter how one looks at this, this is confusing to say the least! If a preset says 16:9 then one should expect 16:9! Remember, Im using the display window of iDVD to show me the output.
To detail my steps as hanumang has said, im doing the following:
1. in FCP I encode to QuickTime Move
2. Open iDVD & Create a Project
3. 'Drag' The QT file into the menu
4. Using iDVD Preview function, Preview the QT file
5. ITS STILL 4:3
now, the above was done with QT Conversion which as also set to encode 16:9 and still had the same result.
Thnaks to you both.

Similar Messages

I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

What settings are you using to export the video with? I think 29.97fps is the only one that works with LR 5:
http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/

.mov file plays great in QT and FC X, but only play video in Premiere. Audio want play in Premiere

.mov file plays great in QT and FC X, but only play video in Premiere. Audio want play in Premiere

Read Bill Hunt on Audio Conforming http://forums.adobe.com/thread/726693
-and Source Patching http://forums.adobe.com/thread/1442800?tstart=0
or
MOV is a wrapper, what is inside YOUR wrapper - Exactly what is INSIDE the video you are editing?
Codec & Format information, with 2 links inside for you to read http://forums.adobe.com/thread/1270588
Report back with the codec details of your file, use the programs below... A screen shot works well to SHOW people what you are doing
http://forums.adobe.com/thread/592070?tstart=30 for screen shot instructions
Free programs to get file information for PC/Mac http://mediaarea.net/en/MediaInfo/Download
ADDED... this is a user to user forum, not Adobe support, so you need to be patient and wait for someone to answer... I deleted your two duplicate questions

TS2972 i have done all 7 steps recommended by the troubleshooting articles and only when i restart my router does my library show on apple tv2 but only for about 5 minutes, this was never a problem before the updates of itunes and apple tv2,

i have done all 7 steps recommended by the troubleshooting articles and only when i restart my router does my library show on apple tv2 but only for about 5 minutes, this was never a problem before the updates of itunes and apple tv2, i have spent insane amounts of money on the apple store buying movies and tv shows that i cannot watch anymore, and no there is no firewall on my laptop nor my router, so no port configuration is needed
i have read many articles for this problem but there is no solution, some say restart the router, others say uncheck the option to sync iphone over wi-fi, others suggest not hitting the "done" button after setting up homeshare on itunes, NONE of them work. My itunes library disappears from ym apple tv 2 after 5 minutes or so

Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

Cannot export as WMV - Inconsistent Audio Sample Rate error

Hello,
I am getting an error message when I try to export a sequence using quicktime conversion to a WMV. "Inconsistent Audio Sample Rate - The media you are exporting contains audio with multiple sample rates".
I used Soundtrack Pro for the first time- to analysis and fix an audio file with pops. It worked wonderfully. I don't have much experience with this program and the audio is set to 32-bit stereo with a file ext stp. Not sure how to change this or if I need to.
I have done some tests and I have no problem exporting as a quicktime. I am using the latest version of flip4mac software. Your help is appreciated.
Cheers,
Chris

Hi Susan,
Thanks for your quick reply. The link helped alot.
For others facing this problem, I found this solution.
1. Export sequence as a Quicktime movie (not conversion) using current settings and make movie self-contained.
2. Create a new sequence and change the sequence audio setting (under sequence-general) to 44.1 kHz - Dept 16-bit config default
3. Drag your Quicktime movie into this new sequence.
4. Export using Quicktime conversion to WMV with these settings for audio.
5. WMA9 Standard - One pass, CBR at 64kbps, 44.1 khz, Stereo.
Voila.
I have struggled with flip4mac from the start. Never had any luck using the 2 pass method which 1'm told is better quality. Tech support at the flip4mac discussion group generated much discussion but no solution. I have settled with single pass quality in order to get the job done.
Does any remember the days of linear editing when you delivered a master, protection copy and some VHS dubs and you were done? Oh, I'm showing my age. Ha.Ha.
Cheers,
Chris

Inconsistent Audio Sample Rate - Export issue

I am attempting to export my project into a Windows Media file and I'm getting an error that says "inconsistent audio sample rate" Does anyone know how to fix this problem?

That error was introduced with the release of Quicktime 7.2. Flip4Mac released a beta with the fix for that particular audio error thing HERE. I don't think the final is ready yet, just the beta, but it's working for me. Don't be "put off" by it, but, before you can download the beta, they ask you to fill out some registration info so you can report back any problems you might encounter.

Fixed but still says Inconsistent Audio Sample Rates

I imported some purchased music .aif files; completed my piece then tried to export a .wmv file through Quicktime. It told me I had "Inconsistent Audio Sample Rates" so I went back and re-exported the file through Quicktime with a sample rate matching the rest of my project.
I'm still getting the "Inconsistent Audio Sample Rates".
What do I need to do to get the project exported?
Cheers,
D

I have also been getting this error - just starting today. I tried exporting a mixdown in aiff, then converting that to MP3, bringing it back into a new sequence -- all with no luck.
However, I then exported this mixed-down version as a self-contained movie. Then, I did the wmv conversion with Cleaner 6 and it works. Slight glitch in frame 1 for some reason (motion file within the FCP sequence) -- but it seems like it's on the right track.
I also get the feeling this is due to the audio update. These are 8-track sequences I've been working with on and off for two months -- and the first time I try to render out after the audio, osx, and QT update, and it's crapping out on me. Could also be the changes to the h.264?
I've been spending all day on this, and I'm at my wits end!

Problem with audio sample rate when exporting

I am having an issue with my audio sample rate. For some reason it is set at 8 khz by defualt when I am exporting. This was not an issue until the latest update (2 weeks ago). I'll try and give all the info I can up front. Also I tried customer support...that was a nightmare.
Ok the issue I am addressing is that the audio sample rate when exporting is at 8khz by default. Which to my knowledge has NO relevant use what so ever. Even when I set the file format to h.264 it insists on resetting to 8khz. Even if I manually set everything look at the render queue and click on output module again it changes the sample rate back to 8 khz automatically which I must adjust again. Why can it not just be set at 48000 like every other adobe product is and like it used to be two weeks ago. Does anybody have an answer?

This problem is addressed by the After Effects CC (12.2.1) bug-fix update, which is now available:
http://adobe.ly/AE_CC_1221
Note the part at the end of that page about a crucial update for the Creative Cloud desktop application, which addresses some severe problems with AME, Premiere Pro, and After Effects.

HT201592 I redeemed my code for the first season of game of thrones for the digital copy but only 1 episode downloaded. why did this happen? what should i do?

So I have a Samsung laptop with a terabyte of space, my itunes is up to date. i went online to redeem the code for my digital copy of the first season of game of thrones but when it downloaded, only 1 episode downloaded. why didn't the rest of my episodes download? how do i get them?

Hello annefromnorth stonington,
Thanks for the question. Let’s try checking for available downloads from your iTunes account:
iTunes 11 for Windows: Check for iTunes Store purchases
http://support.apple.com/kb/PH12505
Make sure all your purchases have been downloaded
Make sure you’re connected to the Internet.
In iTunes, choose Store > Check for Available Downloads.
Enter your Apple ID and password (if requested), and click Check.
If there are no averrable downloads, check your purchase history for the missing episodes:
See your purchase history in the iTunes Store - Apple Support
http://support.apple.com/en-us/HT201271
Cheers,
Matt M.

Export/share wmv "inconsistent audio sample rate"

I've never used iMovie before today. I successfully imported a mini DV clip and need to "share" it as an wmv. I keep getting an error stating "inconsistent audion sample rate". What does this mean and how do I fix it so I can save my clip as a wmv file?
Thanks much.

That error was introduced with the release of Quicktime 7.2. Flip4Mac released a beta with the fix for that particular audio error thing HERE. I don't think the final is ready yet, just the beta, but it's working for me. Don't be "put off" by it, but, before you can download the beta, they ask you to fill out some registration info so you can report back any problems you might encounter.

Audio sample rate 192 k but seem less than that (about 20% less) when i run software defined radio .

I bought Pavilion dm4-1000au with Win7 Starter as original OS. My target is to get full Sample rate of Audio 192 K when I ran Sofware Defined Radio like Softrock SDR. Actualy I only get less than 100% of sample rate. So, frequency coverage of SDR become less than I prefered 192 KHz.
What I have done is up dating Audio driver from HP Support/ Driver Download center only.
How to solve this problem ?.

Thank you for your input.
YES - I've seen the "right click Time Code display and switch to audio units timeline solution - yet audio units do NOT appear as an option for me...hence all of this drama.
ADOBE - do I have a munged install? Any other advice? We keep a clean system (Mac Pro 10.6.11 or whatever is last iteration of SL). I guess I could try installing into a new User and see if it behaves any differently.
Sigh...we bailed on FCP7 after trying FCPX and also passed on going to Avid MC. Hope PP is reliable for our work flow...again thx for all help.
PCG

5 Minute video - But only exports :30 seconds...Help Please!

It's my first project on Final Cut Express HD. When I export it to a Quicktime movie, it exports the complete 5 minute video. When I export it using quicktime conversion to wmv. it only captures the first 30 seconds or so of the video.
Why is this happening? What can I do? Any suggestions?
Thanks for your help.

welcome,
sounds like you have the demo version of flip4mac, unless you pay for the complete version it will only allow you to export 30 seconds.

IMovie08 plays my video, but any export will not - WHY?

Hi. My short (<10 min) video and audio plays fine in iMovie, but sharing it to Media Browser, or exporting it using any of the methods, then opening it in iDVD always results in a project with audio but no video.
If I go back to iMovie, the video is there, of course.
Why isn't the video exporting?
Thanks very much for any help you can offer.
David

It works for me.
I export, choose a file size - Medium or Large - and it exports ..to the 'Media Browser', in which case it plays perfectly in QuickTime Player (..we-e-ell, as long as I turn on "High Quality" playback within QuickTime!..) and it also exports to the web, e.g: here.
It's a different kind of editing program ..well, not really editing, but Assembling.
It's for quickly assembling a whole load of clips, slinging in some music and a few quick Dissolves and adding a Title or two.
For laying video over an audio track, or for dropping in 'cutaway' shots, or for adjusting audio levels through the movie, for mixing audio tracks, etc, continue to use iMovie HD 6.
So we now have two movie-editing programs: quick assembly in iMovie '08 (..or "iMovie 7.0" as "About iMovie" describes it..) and considered fine adjustments, Bookmarks, Chapter Markers, Slo-Mo and Reverse, plus many other F/X, transitions and titles in the still-extant iMovie HD 6 version.
Two tools, and the new one has cost about $15, when you consider it to be just one item within "iLife '08".
I think it's a bargain at $15 ..it's got the optical tweaking of the high-priced 'Aperture' ..now also available for tweaking photos' highlights and shadows within the new 'iPhoto'.. and it's got very fast 'scrubbing' (..or 'skimming' as it's now called in iMovie '08..) with easy selection of just the sequence(s) which you want to add to a project, it's got multiple (unlimited?) Undo, for fixing mistakes, it's extremely stable compared with many previous versions of the 'old' iMovie.
I find it very easy to get timing right just by 'skimming', and although I can't fiddle with the audio to the extent I used to in iMHD6, it provides very fast editing, colour, contrast and exposure adjustment (..no rendering!..) and - just to emphasise this - it is STABLE ..no more constant Saving, nor having to Quit and Restart.
So - it's different.
As Beverly and Karsten have said, maybe it should be called "iVideo" to distinguish it from the previous versions of "iMovie".
But simply use the tool that's appropriate for what you want to do ..saw, screwdriver, chisel: iMovie HD 6 or iMovie '08.
'06 for delicate fine tweaking of multi-layered audio effects, insert edits and video effects and transitions; iMovie '08 for quick'n'dirty effortless assembly, and fine tuning the look of the video, but without much audio tweaking.
Personally, I don't miss the hours:mins:seconds:frames timecode of iMHD6 ..I edit by 'heartbeat' anyway, so the new, reliable 'skimming' is nice and handy.
..And - so far - I haven't had any problems with Exporting/Sharing ..except that QuickTime seems to display iM'08 material, by default, in lo-quality, so in QuickTime you MUST use Apple+'J' (Show Movie Properties) and tick the little "High Quality" box at bottom-right for decent playback.

I'm a chinese, i downloaded english version of firefox. Everytime I get into facebk, the text in chinese are very small, even thou i've set the font size, it cant help! but only happened on facebk, why? can anyone fix it? i've been trying many times.

firefox > Preferences Content : Fonts & Colors: Advanced Minimum Font Size/ Allow pages to choose their own fonts, instead of my selections above" '''i tryed but helpless'''

If you need to adjust the font size on websites then look at:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

I have 302 events in my iPhoto but only 14 are visible. Any idea what has happen to the rest?

I have iPhoto 9.5.1
I went to go look for my photos from Venice and realized that all of my events were gone except my photo streams. On the left hand side in iPhoto it tells me that I have Events (302), but only 14 show up. Also tells me that I have iPhotos (1,485), which a lot of are not showing up. I am only able to view my photo streams.

What happened before this problem occurred? Have you moved your iPhoto library? Run any cleaning/duplicate remover apps? Shared the library with another account?
Have you checked, if the search field at the bottom of the iPhoto window is cleared? If this search field is not empty, fewer events and photos will show.

DV 16:9 but Only Exports 4:3 WHY? Also Audio Sample Rate Problem

Similar Messages

Maybe you are looking for