Dv camcorder input with Omni 120-1134 all-in-one

Where do I plug my DV camcorder into my HP Omni 120-1134 all-in-one?

Hi,
If we knew what is your DV camcorder we could be able to help. Please supply more info.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • HP Omni 27-1210xt All-In-One Desktop PC ... Missing icons

    Hello All,
    I bought an HP Omni 27-1210xt All-In-One desktop PC with wireless mouse and keyboard and Windows 8 OS approximately 7 months ago.  The indicator on the mouse is now intermittenly flashing Yellow.
    While researching my problem on the HP website I came across an HP Support Document that dealt with troubleshooting a wireless keyboard and mouse. 
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?prodSeriesId=4162199&objectID=c0194489...
     Within this document, under the heading "Improving the performance of the wireless keyboard and mouse" it references mouse and keyboard battery-level indicator icons that reside in the notification area and to hover the mouse pointer over them to display their statuses.
    I now know that "Green = a full battery, Yellow = the battery is half full and Red = it's time to change the batteries" but it would still be nice to have them available to check at a glance.
    I have checked my Notification Area Icons and they are not there.  Can they be added?  And if so, how?  Any and all help will be greatly appreciated.  Thank you.

    Yes! Absolutely. That is important information because with it only being 7 months old, you are still well within the one-year standard warranty that comes with all HP computers. 
    Now, just to warn you, I don't know if the following scenario will apply to your computer or not. Often the warranty start date can be inaccurate. This is a normal thing and it can be corrected. It happens because some computers sit on the shelf at retail store for two months, sometimes only a day. Until the day it's purchased, HP has no way of predicting what date the computer will be purchased so all warranties start on the date of manufacture. 
    Like I said, it is very easy to correct, so don't worry. If you call in and they say it seems you are out of warranty, just let them know what day (just a time frame) you got it. They will need a digital copy of the receipt. It is expected that most customers won't still have the receipt. It's not a big deal. Retail stores can provide you with a copy. It takes, maybe, 48 hours to get corrected. Once the warranty start date is corrected in the system, the tech support agent can create an order for mouse replacement or USB dongle replacement.  
    Warranty start dates being incorrect is an issue that sometimes happen when the computer is nearing the 1 year mark, so I just wanted to provide you with a little forewarning. As I said, this issue may not even apply to your computer. 
    If you decide to contact tech support, and receive a replacement mouse or dongle, update the thread if you get a chance on the results

  • Regarding about Ipad with the I-phone all in one? When will be  available to the public.

    Regarding!!!
    My regard is about I Pad with the I-phone all in one? When  will be available  for the public.? Thanks.

    The what?  There is no combined device just wild rumors and pure speculation.  If or when there ever is such a thing, you'll know the same time as the rest of us. When Apple announces it.

  • Where can i purchase a keyboard skin for my sk2061 - came with the hp pavillion all in one 23

    where can i purchase a keyboard skin for the sk2061 keyboard that came with the hp pavillion all in one 23?

    RXChic wrote:
    ...anything newer than July 2011 models, which have the thunderbolt. 
    There is nothing newer than the July 2011 model. The model released in July 2011 is the current model.
    http://www.newertech.com/products/nuguardkeyboardcoversmacbookair13.php

  • Can ipod3 connect to print with an HP photosmart4500 all in one ?

    Can ipod3 connect to print with an HP photosmart all in one 4500?

    See:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&task Id=115&prodSeriesId=3575173&prodTypeId=18972&objectID=c02775166

  • Drivers for HP omni 105-5510ix all in one pc

    please send me a link for  HP omni 105-5510ix all in one pc 'Graphic drivers'

    Hi,
    Here is the link for Windows 7 & Windows 8:
       http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&product=5351429
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Hi i have problems with my iMac g4 all in one

    hi i have problems with my imac g4 all in one ive installed a airport card and its running fine but when i try to connect to my wirless router it connects but i still have no internet,it tells me it cannot find server,im with utility warehouse
    has the airport card got its own secruity???????if so how can i disable it????or do i need a dongle??
    or would it be best to get hold of utility warehouse
    i have another mac running on it and my iphone and an android pad so the g4 is the only one thats not
    please help some one as i would like to sell it to a friend who in need of a computer but needs it to be wireless
    ty

    Reset security questions
    http://support.apple.com/kb/HT5312
    If you do not have a Rescue email, you need to contact apple support, they will guide you through the process of resetting your security questions.
    https://ssl.apple.com/emea/support/itunes/contact.html

  • After updating to WIndows 10, I can print but not scan with my HP 2210 all in one

    I updated to Windows 10, and since then I'm able to print but not scan with my HP 2210 All-in-one printer.  I've tried downloading the software updates but nothing seems to work.  Any suggestions

    Hi , and  I see you are both having trouble scanning after upgrading to Windows 10, and I may be able to help. Most products do have updated software available on HP's support website for Windows 10. I've also seen a few posts that say the Windows 8.1 driver will work for Windows 10 as well, so you could try that too.  HP provides a free tool called HP Print and Scan Doctor to diagnose and resolve printing and scanning problems. I recommend downloading and running the HP Print and Scan Doctor, if it doesn't fix it automatically let me know what errors or messages you receive.  Do you know if you are able to scan using Paint? To Scan from Paint: HP Multifunction Printers - How to Scan: Windows 8 
    (It's the same for Windows 10, from what I've been told)Right-click the Start button () in the lower left corner of the screen, click Search, and then type Paint.Click Paint in the results.Click File, and then click From scanner or camera.Select your printer, click OK, and then click Scan.  Please let me know if any of these steps resolved your issue, or if there is anything else I can do to help.  I look forward to hearing from you!  Thanks, 

  • Printing problem with HP deskjet 3050 all in one J610 series

    I have a HP deskjet 3050 all in one J610 series which I am using with Windows Vista Version 6.0 (Build 6006: Service pack 2).  Connecting is by USB port.  I have not used the printer for some time, but have done all the maintence checks & it is good to go.  When I want to print a letter the only thing that gets printed is the email address which is coloured blue.  I think the problem is in the settings of the printer features.  I can print the letter in gray scale but this is not easy to read and not suitable for business dealings.
    I would appreciate help with this problem.  A definition of the terms used in the printer features might help me resolve it by my self.
    Thanks
    This question was solved.
    View Solution.

    Hello @Tellen,
    Thank  you for visiting the HP Support Forums! I understand you are running into some print quality problems with your HP Deskjet 3050. I see when you attempt to print a letter you will only see the email address and its in blue ink.
    First I would like you to click here to download and run the Print and Scan Doctor > www.hp.com/go/tools- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    What does the PSDR find? If you are still not getting black text, please continue here: Fixing Print Quality Problems for the HP Deskjet 3050 (J610) All-in-One Printer Series
    If after the troubleshooting has been done and you are still seeing the issue leave me with the following information:
    1. What is your current Operating system, Windows or Mac and which version?
    2. How is the printer connected, USB or Wireless?
    3. If you print a test page from the front panel do you see the same issue?
    I hope to hear from you soon.
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Fax issue with HP OfficeJet 7210 All-in-one

    Hi everyone,
    I've got an issue with my HP OfficeJet 7210 All-in-one printer/fax (USB connection)
    I'm under Mac OS X 10.5 (Leopard).
    When I was under Tiger, my printer/fax worked properly.
    After the upgrade to Leopard, the printer/fax was still installed (HP 7210 was displayed as installed in the printer list of the System Preferences).
    The printer works fine but the fax doesn't ! An error consistenly occurs when I try to send a fax.
    Thus, I decided to uninstall every HP components from my Mac. Then I proceeded a fresh install of the CD software/driver I received with my printer/fax.
    During the installation, I get an error : "HP AIO TRAP has quit". I went further and continue the installation till the end by ignoring the problem.
    The printer is still working fine but I'm unable to install my fax in the System Preferences because the fax simply doesn't appear either on the "Fax" tab or on the "More printer" tab.
    Only an unuseful "Bluetooth" fax appear, I can install it but it's impossible to send a fax with it : http://users.cybernet.be/ptsalos/hp-leo1.png
    In the "More printer" tab I got this : http://users.cybernet.be/ptsalos/hp-leo2.png ... It seems that no fax are detected (no fax are displayed in "HP AiO Télécopie" and the "Add" button is gray).
    I hope you could help me !
    PS: the fax works properly under Bootcamp with Windows XP PRO SP2
    Thank you very much.
    Message was edited by: phl00

    OK, so enough software is available (or will so been available) for me to start posting these types of workarounds (and getting more of you up and running). And remember, what I am about to tell you is NOT supported by HP, so if you run into problems doing this do NOT call customer support. I am posting this stuff here to try to help out the community. I will stop posting if this gets abused (even once).
    If you have an HP OfficeJet 7310 or 7210 printer, go to HP.com/support, tell it you have a 7410, and download the installer (follow my instructions on the [Beta Announcement|http://discussions.apple.com/thread.jspa?threadID=1252889&tstart=0 ] thread if you need more details.
    Now follow these instructions:
    Step 1: Run the installer, and follow the onscreen prompts.
    Step 2: When the screen comes up to select your printer, check the box my printer isn't listed and continue.
    Step 3: On the next screen select the OfficeJet 7400 Series and continue.
    Step 4: Select the type of connectivity to your device.
    Step 5: Install the software (this may take several minutes).
    Step 6: When you get to the Setup Assistant, skip it. Make sure you de-select the two checkboxes before you continue otherwise it will remind you every time you log in.
    Step 7: Go into the Print & Fax System Preference and manually add your print queue.
    Step 8: Go into the Print & Fax System Preference and manually add your fax queue.
    Step 9: Start using your device.
    Congratulations, you now should have a fully functioning device under Leopard. So what won't work with this work around:
    1) The documentation on your device will be wrong.
    2) If you did not previously set up a station ID for the fax, one will not be set.
    3) Device Manager will not know anything about your device so the functionality there will be pretty useless (most stuff can be done through other means though). However if you already have a Tiger install, even this should (theoretically work).
    4) Good question, if you run into any other issues post them here, I may have forgotten something.
    WARNING! WARNING! WARNING!
    Please install the final drivers when they come out, and preferable the beta drivers too for your device too! Just because things are working for you does not mean that this configuration is supported (its not) or that there aren't any known problems (there may be, we certainly don't test it) so please take caution and update when possible.
    Just trying to help.
    Andrew

  • Problem in Printing with HP Deskjet F370 All-in-One Printer

    Product Name and Number: HP Deskjet F370 All-in-One Printer
    Cartridge Number: Black - HP 21 Black Inkjet Print Cartridge   (C9351AA)
                                       Colour - HP 22 Tri-color Inkjet Print Cartridge   (C9352AA)
    Operating System Installed: Windows 7 Home Premium (64 Bit)
    Hi,
    I am using HP Deskjet F370 All-in-One Printer. Recently I am facing a critcal problem.
    I am unable to print anything in red or brown colour.
    The cartridges are in good condition with more than 80% ink level in color cartridge and 65% above in black cartridge.
    I have done alignment of printer cartridges and also reset the printer.
    However after that, I have taken a test print which works fine. I can print in black or any other colour expect red and brown.
    Whenever I am trying to print anything in brown it is coming out in green colour.
    I don't know what to do....Please help.
    Thanks
    Suvadeep Paul
    Thanks
    Suvadeep Paul

    Hi there,
    This article should cover the missing colors you are experiencing. Give the steps located here a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Unable to do mobile printing with HP Deskjet 3050 All-in-one J610a (CH376D)

    I have a 3050 All-in-one J610a which I am using for about an year now.
    In the beginning I was able to print/scan using HP app (probably HP home & Biz) on my iPhone4 but for past few months i didn't use it but kept updating the app to the latest versions. Now, I have tried all HP apps available on itunes App Store but none of the apps are able to detect my printer even though my windows laptops (running windows XP and Win7) are connected with the printer over wireless network and printing seamlessly.
    I know my printer is not eprint or AirPrint compatible but am just trying for a regular wifi print sitting within the same network. After wasting about 6-8 hours trying to find a solution, I am posting this. Please help with any clues/ suggestions? 
    P.S. I am running iOS 6.0 on my iphone 4.

    You're right. I have tried everything like Hp Eprint, HP Printer Control etc. but it is just not able to find my printer. I tried ePrint Free from microtech and that provides an option to connect to a printer by entering it's IP and I was able to connect. But then this free app has very limited usability so can't rely on it completely.

  • Computer Won't Communicate with Wireless HP C6380 All-In -One

    I own a HP C6380 All-In-One which I use with a desktop and laptops running Windows 7 and a netgear router.
    Everything has been working fine until the other day when the unit just stopped printing jobs.  Print jobs in the que just time out.  There are no print errors indicated.
    I re-did the network setup for the printer and it recognizes and connects to the router but the troubleshooting diagnostic says that the computer can't communicate with the printer.
    What am I missing??  Any help would be greatly appreciated.

    Download and run this utility: Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Scanning with an HP 3390 all-in one laser jet printer using Windows 7 pro (64 bit)

    I have recently acquired a Dell Windows 7 Pro (64 bit) OS computer and was wanting to use my HP all-in-one laser jet 3390 printer and scanner. The printer software which came with my HP 3390 will work with my Wind 7 Pro OS computer, however my HP 3390 scanner function will not work using this HP driver software, with my Win 7 Pro OS.  I am trying to locate the appropriate HP scanner and/or different printer drivers that will support both the printer AND scanner functions of my HP 3390 printer/scanner, while using my Windows 7 Pro OS computer.  Within the HP website, I have not been able to find this type of driver software or support, as least listed as such?  I was wondering, if there are maybe no dedicated or described scanner drivers for my situation, is there even another set of drivers which might be intended for other Window 7 Pro OS based computers and other HP printer/scanners, which would work for my situation as well?  Does anyone have a solution to resolve this issue via HP driver software or by another method...maybe even 3rd party?  Ther has to be a solution?

    @ccan 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • Windows 8.1 with my f 300,all in one series

    I am unable to use my F300 all in one series with my windows 8.1 laptop.please help

    Hello hemalsheth80,
    Please let me take a moment to say "Welcome" to the HP Forums.
                                      I hope you enjoy your experience!
    I see that you are having some issues when attempting to connect your printer to your Windows 8.1 computer.
    Please respond with your exact printers Model Number.  As you can see, HP has a number of models that fit the description that you have already provided.
    HP Deskjet F325 All-in-One Printer
    HP Deskjet F335 All-in-One Printer
    HP Deskjet F340 All-in-One Printer
    HP Deskjet F370 All-in-One Printer
    HP Deskjet F375 All-in-One Printer
    HP Deskjet F380 All-in-One Printer
    How Do I Find My Model Number?
    I look forward to hearing from you.
    Thanks for your time.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

Maybe you are looking for