Dv capture

I am using final FCP 5.1.2 and OS 10.4.8 with the black magic deck link sp to acess beta SP. My problem is that when I try to capture DV via a fire wire it does not recognize the source. It does however control the device but no vidoe or audio comes through. I set my capture presets at DV NTSC but under the Quicktime setting it says (missing) DV video. I have tried this with both a camera and a deck and 2 different wires. Furthermore, both the the camera amd deck work on our other, older FCP system which does not have a balck magic decklink. Can you help me out?

You and a tons of others too. I don't think your BM card has anything to do with it. Do you have the latest version of Quicktime?
Here is what I would try. Shut down the computer and disconnect all firewire devices. Reboot computer and open FC, open a new project and reset the capture scratch disk to an internal drive. Go to easy setup and make sure this is the format you want (DV right?), then connect only the camera/deck firewire cable, turn on deck to VTR mode, open log and capture and play the tape. You should see the tape playing on computer. If this doesn't work them change the device control preset to non-controlable and try again.
Good Luck
Z1&V1user

Similar Messages

Unable to capture packets on ASA(ASDM)

Hi all,
We have site to site VPN connection to one of our client. From which we both are accessing our applications and other resources. Now client needs to acccess two of our internal server. So we have created Static NAT in our ASA. For one server they are accessing without any issues. But the other server they are not able to connect. Since its vpn tunnel we havent blocked any ports and its open to all traffic. But their side they have restricted and we need to see whether the packets hitting our ASA or not. Once we observes this, its easy for us to escalate them. I tried packet capture wizard in ASDM. But its not showing anything. Can anyone tell me how to capture packets realated to Static NAT. Please let me know if you want anyother details?
local 20.0.0.0/24 -->this will get natted to --->12.0.6.0/24 when going in for tunnel
we have created
static(outside,inside) 12.0.6.10 20.0.0.10 255.255.255.255 working
static(outside,inside) 12.0.6.11 20.0.0.11 255.255.255.255 not working, we need to check whether its hitting 12.0.6.11
Kindly advise...
Regards,
Bala

Where are you trying to initiate the connection from?
If they are trying to initiate the connection towards your end, and the traffic doesn't reach your end, then there will be nothing on your ASA packet capture.
Please share what you have configured to capture the traffic?
To check if the traffic is reaching the inside interface, just configure ACL between source (real IP) and destination (remote IP), and apply the capture on the inside interface. This will confirm if the traffic is coming inbound towards the inside interface.
To check if the traffic is leaving the inside interface towards the host behind your ASA, configure ACL between source (remote IP), and destination (host real IP), and apply the capture on the inside interface. This will confirm if the traffic is leaving your ASA inside interface towards the host.

Unable to capture video with MSI StarForce 822 GeForce 3!

I have a MSI StarForce 822 GeForce3 graphics card with 64 MB DDR SDRAM on it. I have VGA Out, as well as TV-out (AV), TV-out (S-video), and TV-in(?) (S-video).
This brings me to two questions:
First, I have NEVER been able to figure out how to use the TV-in (S-video) port. I have tried numerous programs designed to capture video, including the one that came with the graphics card, and none of them recognize the card's TV-in. Do you have any recommendations as to how to use this port to capture video?
Second, in reading through the online manual for the graphics card on the company's website (under the name G3 Pro-VT64D MS-8822), I saw that the card supposedly has the capability of "High-quality HDTV/DVD playback" (8822 v2.0.pdf, page 8 ). However, in playing back DVD's through the card's s-video output onto my HDTV-ready monitor, I definately do not see HD quality videos. Could explain why this is the case?
I have an assignment coming up where I must do some video-editing work, and thus I am posed with a situation where I need to capture video using this card (and I can't afford to buy something new for the moment).
Thanks for your help.
Charles Bergmeier

If you have the Video Capture Driver installed then the video capture program should see it. On MSI site version 1.16 of the driver is available for download.
If you still have problems (e.g. too many frames lost) you can try using Virtual VCR (worked best in my case).

Unable to Capture PAL DV footage

I'm working on a project that requires I edit with both PAL and NTSC footage shot on mini-DV. I was about to purchase a plug-in to convert the PAL footage to NTSC, but find that I can't even capture the PAL footage to begin with.
I tried using both a deck and a camera as the source device to capture from and they both play the tape just fine and on the camera's LCD (not a PAL camera by the way), I can view the footage perfectly, but still FCP does not acknowledge any video on the tapes.
I've even tried capturing on iMovie-it tells me that the footage can't be captured because it is 'half-frames' and mentions LP and SP modes. Would this really matter and why does my camera play it just fine?
Also, when I play the tape on the camera and plug-in to a television, the picture keeps rolling, but again, plays perfectly on my non-pal camera.
I've tried switching all pre-sets to PAL, but it doesn't help.
I'm about to make a dub tape with a PAL camera (Sony Z1U) and see what happens, but if anyone has any other suggestions, I'd really appreciate any help.
Thanks.

I tried using both a deck and a camera as the source device to capture from and they both play the tape just fine and on the camera's LCD (not a PAL camera by the way), I can view the footage perfectly, but still FCP does not acknowledge any video on the tapes.
I have never seen an NTSC camera that plays PAL tapes!
Alberto

Unable to capture return values in web services api

At the time of login to web services if my server is down ,
it returns following error :
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
        at java.lang.String.substring(String.java:1438)
        at java.lang.String.substring(String.java:1411)
I want to capture this error so that i can try another server to login. how do i capture this error
Another place where i want to capture the return Value is when i look for a report on the server
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
                           "@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server , it returns a null handler exception.
but if i try catching it by checking my responsehandler is null like rh == null it does not catch it.
Any help will be appreciated
thanks
Rakesh Gupta

Ted : i have two cases
1)   server = server_st.nextToken();
    providerURL = "http://"server"/dswsbobje/services";
    sessConnURL = new URL(providerURL + "/session");
   Connection boConnection = new Connection(sessConnURL);
   Session boSession = new Session(boConnection);
EnterpriseCredential boEnterpriseCredential = new    EnterpriseCredential();
              boEnterpriseCredential.setLogin(userid);
boEnterpriseCredential.setPassword(pwd);
boEnterpriseCredential.setAuthType(auth);
SessionInfo boSI = boSession.login(boEnterpriseCredential);
I have got a list of servers running web servcies stored in my tokens. when i pass the first server name say " test:8080" and that server is down , i want to catch somewhere in the code above that it did not get the connection so that i can loop back and try with the second server say test1:8080
This is for failover purposes.
at present when i was trying to capture return value of boSI it breaks giving the error
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
at java.lang.String.substring(String.java:1438)
at java.lang.String.substring(String.java:1411)
2nd case :
I am geeting reports from the server and scheduling them:
i run the following code which works fine if reports is there
rh = boBIPlatform.get("path://InfoObjects/Root Folder/"src_folder"/" + reportName +
"@SI_SCHEDULEINFO,SI_PROCESSINFO" ,oGetOptions);
oInfoObjects = rh.getInfoObjects();
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
Here if the report is not there on the server then i should be able to catch from the response handle rh that it has got a null value.
but rh does not return a null value
the code ultimately throws a null handle at the following line
CrystalReport = (CrystalReport)oInfoObjects.getInfoObject(0);
i am not able to catch the null value there also.
hope you got my issue.

Unable to capture data in an editable dynamic ALV.

Hi ,
I have created a dynamic editable ALV whose displayed structure can be changed at runtime based on the selection in a drop down list value selector.
Im trying to capture the values entered in the ALV into an internal table before the user changes the structure of the ALV to a different structure.
In the ON_SELECT event handler of the drop down list box , im rasing a data_check event to capture the ALV data.
The problem is that the control is not entering the event handler for the data_check event.
If i raise the data_check event in my save event handler or any other event handler , it works fine.
Can someone please suggest a solution.
Regards,
Newton.

Hi ,
I have figured out that the problem is local to my machine , because the code works fine on other machines.
I guess my internet explorer has some bug.
Regards,
Newton.

Unable to capture audio

Hi,
Last week I updated the drivers for my Blackmagic Multibridge extreme. Now when I try to capture the material in FinalCutPro 5.1.4 I can see the picture, hear the sound on my monitors (they are connected directly to Multibridge), but the captured material doesn't have sound, because it takes the sound from the internal audio input. I tried to capture from Blackmagic Deck Control (an external application) and it works fine, it captures with sound. So I suspect I have to change the audio input in FCP, but dont know where. In audio/video settings in FCP everything is set to DeckLink (Multibrige extreme).
Where is the problem?
Thanks,
Simon

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

Unable to capture from DV tape

I was given a Mini DV tape and when I try to capture it starts the first few seconds and stop with the following message:
"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved."
Any ideas what might be wrong and how I can resolve it?
Thanks.

Hi Steve,
There are several causes that can lead to that problem.
Just copy and paste the error message in the search area of the forum on the right hand side of this page and you will get a number of useful hints.
Best,
G.

Unable to capture the parameter values from a PL/SQL procedure

hi.
i'm trying to capture the parameter values of a PL/SQL procedure by calling inside a anonymous block but i'm getting a "reference to uninitialized collection error" ORA-06531.
Please help me regarding.
i'm using following block for calling the procedure.
declare
err_cd varchar2(1000);
err_txt VARCHAR2(5000);
no_of_recs number;
out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
cntr_var number:=0;
begin
     rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
     dbms_output.put_line('The error is ' ||err_cd);
     dbms_output.put_line('The error is ' ||err_txt);
     dbms_output.put_line('The cntr is ' ||cntr_var);
     for incr in 1 .. OUT_SIGN_TAB.count
     loop
     cntr_var := cntr_var + 1 ;
Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN_TAB(incr).txn_type||','||OUT_SIGN_TAB(incr).objid);
end loop;
end;
Error is thrown on "for incr in 1 .. OUT_SIGN_TAB.count" this line
Following is some related information.
the 3rd parameter of the procedure is a out parameter. it is a type of a PL/SQL table (SEARCH_SIGN_TAB_TYPE) which is available in database as follows.
TYPE "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
TYPE "SEARCH_SIGN_TYPE" AS OBJECT
(ref_no VARCHAR2(22),
ciref_no VARCHAR2(352),
ac_no VARCHAR2(22),
txn_type VARCHAR2(301),
objid VARCHAR2(1024))............

We don't have your rt843pq procedure, but when commenting that line out, everything works:
SQL> create TYPE "SEARCH_SIGN_TYPE" AS OBJECT
2 (ref_no VARCHAR2(22),
3 ciref_no VARCHAR2(352),
4 ac_no VARCHAR2(22),
5 txn_type VARCHAR2(301),
6 objid VARCHAR2(1024))
7 /
Type is aangemaakt.
SQL> create type "SEARCH_SIGN_TAB_TYPE" IS TABLE OF SEARCH_SIGN_TYPE
2 /
Type is aangemaakt.
SQL> declare
2    err_cd varchar2(1000);
3    err_txt VARCHAR2(5000);
4    no_of_recs number;
5    out_sign_tab search_sign_tab_type:=search_sign_tab_type(search_sign_type(NULL,NULL,NULL,NULL,NULL));
6    cntr_var number:=0;
7 begin
8    -- rt843pq('DWS','3000552485',out_sign_tab,no_of_recs,err_cd,err_txt);
9    dbms_output.put_line('The error is ' ||err_cd);
10    dbms_output.put_line('The error is ' ||err_txt);
11    dbms_output.put_line('The cntr is ' ||cntr_var);
12    for incr in 1 .. OUT_SIGN_TAB.count
13    loop
14      cntr_var := cntr_var + 1 ;
15      Dbms_output.put_line(OUT_SIGN_TAB(incr).ref_no||','||OUT_SIGN_TAB(incr).ciref_no||','||OUT_SIGN_TAB(incr).ac_no||','||OUT_SIGN
TAB(incr).txntype||','||OUT_SIGN_TAB(incr).objid);
16    end loop;
17 end;
18 /
The error is
The error is
The cntr is 0
PL/SQL-procedure is geslaagd.Regards,
Rob.

Unable to Capture SD video

I have been using CS5 to capture video with no problems until the last few days. I am using CS5 with all updates, Nividia GTX 470 (updated to newest driver), I have tried to capture using a Canon XL2 (PAL) camera and a Sony z5 (using sd settings). What I see in the capture screen is just black - no footage or audio at all. I can control the camera from the PPro capture window ie play it, stop it, rewind etc...
I have read other posts relating to this problem and have tried their suggestions (logging on with administration rights etc) This is the first time that this has ocurred after many years capturing without problems with PPro. I have tried Scenalyzer but get the info saying something like that no video is coming from the drivers. I have tried different firewire connections and have installed a new firewire card I have mada a fresh installation of both OS and adobe software. Any help appreciated!
Windows 7 64bit Ultimate
!2 gigs RAM
i7 930
Asus P6t
Nvidia GTX 470

SUCCESS!...I seem to have found a solution - still not sure what happened but when I installed the firewire card, I disabled the onboard 1394 connection in the bios ( I didn't think I would need it.) Anyway, I re-enabled it and connected my XL2 to the onboard 1394 firewire and it worked! BTW, this was all done on my main Video editing PC and not on the different pc, I said I would.

Unable to capture audio from BlackMagic HD Extreme via Voice Over tool

Hi !
I'm trying to capture audio via my BlackMagic HD Extrem card using the Voice Over tool in FCP6, but I can't, no audio is incoming.
I can ingest audio with video using log and capture, then I know my card and my cables are working.
I tried to set the BM card as audio input in my Audio's System Prefereces Pane, but it isn't working either.
I've been looking on the BM website, but I found nothing.
Can you help me ?
Thx

Thanks for the reply.
Looking at system preferences I found that audio input was set microphone. Don't know how it happened. I switched it to DeckLink and now FCP displays 16 input channels in Log and Capture dialog. I didn't try to capture yet but I think it solved the problem, because before I had only two channels displyed.

Unable to capture SQL Server Schema

I am trying to capture SQL Server 2005 demo schema (AdventureWorks). It does shows the numbers of Tables/Indexes captured..but finishes with this error..
Error ocurred during capture: Exhausted Resultset
Column not found. Skipping index detail on index 'IX_StoreContact_ContactTypeID'
Column not found. Skipping index detail on index 'IX_StoreContact_ContactID'
Column not found. Skipping index detail on index 'AK_StoreContact_rowguid'
Column not found. Skipping index detail on index 'IX_ProductVendor_VendorID'
Column not found. Skipping index detail on index 'IX_ProductVendor_UnitMeasureCode'
Column not found. Skipping index detail on index 'IX_Address_StateProvinceID'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'IX_Address_AddressLine1_AddressLine2_City_StateProvinceID_PostalCode'
Column not found. Skipping index detail on index 'AK_Address_rowguid'
Column not found. Skipping index detail on index 'AK_Department_Name'
Any help is appreciated..
Ajay

Hi Nandu,
As your description, you come across an error(vsjitdebugger.exe cannot be found). Please confirm if the error occurs during the installation of SQL Server 2012. If so, please help post SQL Server setup logs. By default, SQL Server setup log file locates
in C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
Base on my research, this error could be caused by that the previous uninstallation is improper and vsjitdebugger.exe file could be mistakenly deleted.
To troubleshoot the issue, you could start your computer into Safe Mode and fix your problem with one of the following methods. For more information, please refer to the article:
http://www.fixerrorkit.com/fix-error/fix-vsjitdebugger.exe-error.html.
1. You could execute the sfc /scannow command following steps below.
a. Press "Windows+R", type in cmd and then right click "Run as administrator"
b. Type in sfc /scannow (There's a space between sfc and /scannow) into the dialog and hit Enter key and click ok.
c. Wait until the System File Checker finishes the check.
2. You could use a Windows repair installation, also known as a Startup Repair to repair your Windows system files.
3. You could install the latest Windows updates to fix vsjitdebugger.exe error. Microsoft often releases new service packs and system patches to replace or update some DLL files of Windows system.
4. You could use third-party tool such as Automatic Error Fix Tool to fix your vsjitdebugger.exe error. However, Microsoft cannot make any representations regarding the quality, safety, or suitability of any third-party software or information found there.
In addition, if you are unable to install Visual Studio, I suggest you post your question in Visual Studio Setup and Installation forum at
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vssetup . It is appropriate and more experts will assist you.
Regards,
Michelle Li

Unable to Capture Footage, File Error: Unknown file

Alright, I've been at it for hours trying to figure out what the heck is going on. I have been able to capture footage before but not with this version.
-I have already repaired disk permissions twice, ran disk warrior also.
-I have it on the basic DV NTSC Setting, which worked perfectly on the laptop, but I need to edit this project on the tower.
-Have been through numerous settings and no go.
-I can control the deck/camera but it will not control the camera when trying to capture
Running Final Cut Pro HD 5 completely updated with the most recent software.
Need some help, this project cant be delayed this long.
-Caleb

If you recently upgraded/updated QT, you might check this link.
http://docs.info.apple.com/article.html?artnum=301852
K

Unable to capture from my Canon hv30

I just tried to capture some footage from my hv30, the first time I've tried, and it say's on the capture screen that the capture device is off line. I have the camera properly connected and its in the right setting, is there some setting in premiere that's i have wrong? I have another program that came with the camera, and it can't connect to the camera either, saying that its not connected. Not sure what to do at this point, so if anyone has any ideas that would be awesome.

This is the most weird camera I have ever seen, you have a miniDV tape camera appartently without a Firewire I/O connector. I just looked at this Canon specification http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=177&modelid=1620 6#ModelTechSpecsAct
and there is nothing about a Firewire/IEEE-1394/etc. Without a firewire interface Premiere is unable to capture video. apparently there is some software supplied with the camera, maybe it can capture the video via the USB interface to your computer and then (if it is the correct format) you can import it to Premiere.

Unable to capture Canon HDV footage with Sony v1u camera

I'm trying to capture hdv footage filmed with a canon video camera with my sony v1u. My sony footage captures as it should, but the canon footage, although playing fine on the sony camera, will not capture to cs4. Any suggestions?

Check all camera settings and make sure they match the original filming mode on the other camera... and veryify your PPro settings match
If that doesn't work, try http://strony.aster.pl/paviko/hdvsplit.htm

Unable to capture 2 audio tracks

FCP refuses to capture 2 audio channels?! I have one mic on channel 1 and another mic on channel 2 but FCP captures only 1 mono track eventhough in Clip Setting both channel 1 and 2 are selected. Does anybody know what could be wrong?
Another thing is that when I have captured a clip - it won´t appear automatically in the Browser as it always has done? Now I need to import the Clip from my Project folder. FCP going crazy.

Hi boxpuppy,
iTunes is not able to import some Windows Media Player files. See this article for further information -
Importing Windows Media Audio files with iTunes for Windows
http://support.apple.com/kb/HT1844
Thanks for using Apple Support Communities.
Best,
Brett L

Dv capture

Similar Messages

Maybe you are looking for