DV devise not being read by computer

I'm baffled by my issue.
Two cameras (Optura 20, DVX100) not being read by my eMac.
1 Sony cam reads fine.
Only recently, after 3 years of my Optura being used as a deck on my eMac, decides it doesn't want to communicate with my eMac, and another G5 tower.
-tried disconnecting all other fire wire and usb cords
-tried different fire wire cords
-tried logging in as a different user
-tried different inputs
I'm affriad there's a softwhere instalation i made on my comp that is interfearing with reading these DV devises.
I tried trashing previous Quick Time pkg files in my Library/Recipts...nothing.
Even my System Profiler has a hard time trying to read the signal when my cameras are plugged in. It won't even read an external HD if the camera is plugged in.
If there are any other suggestions out there...
I'M STUMPPED!!
Once I figured it was a software issue, the same issue occured when I tried plugging into a different G5 tower.
I'm trying to think if settings on the cameras are blocking/causing the issue. Still can't make sense of it all.
Do you keep "DV Out" off or on?
Thank you KINDLY in advance.
Regards,
Crzy K.

Opening a new thread with the same problem ussually don't help to get an answer!
http://discussions.apple.com/message.jspa?messageID=3288963#3288963

Similar Messages

SD card not being read by computer (Windows 7)

Sorry if this is not the correct forum to post in. I didn't know what forum to go in for this help. I inserted my SD card into my SD drive on my computer. I was hoping a window would pop up letting me know it read it, and I would be able to upload my photos to the computer. Nothing happened. So I tried a few times and nothing happened. So I searched on the internet for some answers. Some people were saying that even if your SDHC card goes into the slot, the computer won't read it. I am using Windows 7 by the way. They also that if it is over 2gb the computer won't read it. I want to know where I go to download any driver updates? Any help would be greatly appreciated. Thank you.

hi
try this two driver
Realtek USB 2.0 Card Reader Driver
Taisol GL826 Card Reader Patch
Try one first then test it.
A wrong driver will not push through so in that way you won't be installing the wrong one.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Ipod only sgows the logo and is not being read by computer

i recently put song onto my ipod but now when i turn it on it shows a black screen and the ipod logo only. it does not change from that. what do i do?

You may need to reset it. Put the hold switch to the OFF/White position. Now toggle it ON/orange then back off again. Then press and hold both the MENU and center buttons on the iPod and hold them for a good 15 seconds or so. Your iPod should reboot starting with the Apple Logo screen.
If it doesn't work the first time, give it a second or third go. Sometimes it takes a few/several tries.
See this thread as an example of what I mean by needing to try it many times...
http://discussions.apple.com/message.jspa?messageID=5065208
If that doesn't work, you may need to restore it, but to do that, you may need to put it into disc mode...
Putting iPod into Disk Mode
http://docs.info.apple.com/article.html?artnum=93651
Good luck,
Patrick
p.s. http://www.apple.com/support/ipod/five_rs/

Ipod not being read by computer

My computer (PC) isn't reading my iPod nano, but other computers are. In the mean time, my computer is able to read my mom's iPod nano (they are the exact same thing). I've tried different chords, I've updated and restarted my computer, but I don't know what's wrong with it. It's quite stressful because I've been trying to update my iPod for a while and haven't been able to.
Thank you

I'm haveing the same problem; my computer isn't recognising my brother's ipod so I can't transfer his songs onto our new computer. I've reinstalled itunes and restarted the computer but nothing is working. I don't know what to do and it's getting Realy annoying!

I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

I have an iphone 5s and it is synced to itunes and works fine. previously I have downloaded audiobooks to my wifes 6th gen nano using this account - now I tunes does not recognize the device and also it seems that it is not being read by the computer?

Hey Stan1958,
Thanks for the question. I understand you are experiencing issues with your iPod nano and iTunes. Based on your symptoms, you may find the following resources helpful in resolving this issue:
Windows
iPod appears in Windows but not in iTunes
iPod not recognized in 'My Computer' and in iTunes for Windows
iTunes reports that "iTunes cannot recognize this iPod at this time"
Thanks,
Matt M.

Ipod not being read and freezing

When I plug my ipod into my computer, it goes to "do not disconnect" but not the flashing do not disconnect. Its frozen. My computer wont read it. So I unplug it and its frozen. I know how to restart it but that doesnt help me from when it freezes again once I hook it up. How do I stop it from freezing and not being read. Thanks

i am having a similar problem with my 4g 20G
it freezes when i try to update. i thought maybe it was the latest version of itunes i recently installed but i reverted back to an old updater version and itunes 6 and while i was able to get 300 songs on the ipod without freezing, when i tried to put the rest of my library on there it freezes. i've even tried to put as little as 15 songs on at a time and that still freezes the ipod.
i have a mac powerbook with macos 10.2

How do I unlock ipod when it is not being recognized by computer and itunes

How do I unlock ipod when it is not being recognized by computer and itunes?

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

My Ipod touch is not being read by Itunes?

I get this message about and Iphone (not being read) but my ipod touch just being read. It's a 32GB model.
It was reading the first few times, and then it stopped all of a sudden.
I also attempted to follow the instructions for getting help (No luck, uninstalling the Itunes resteting the Ipod, nothing seems to be 'working'.

Did you follow the instructions here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
Have you tried another computer for troubleshooting purposes?

When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. Any ideas on how to get the system to read the iPad?

When plugging in an iPad in Apple Configurator, it is not being read under USB Connected so I can't update it. The iPhoto window opens up and reads the photos on the iPad, so it is connecting to the computer. Earlier today I wasn't having any problems. I have shut down the iPad and the computer and started over, but that didn't help. Any ideas on how to get the system to read the iPad so I can update the apps on it?

Hi, is the problem just to update your apps on your iPad? Here is what you should check. Is the iTunes on your computer updated to the latest version? Does your iPad needs to be updated? Do you have enough storage on your iPad to do the update? On your device is your iCloud back up checked?
Go to Settings - iCloud - Backup/Storage - see if its checked, and try unchecking it before connecting it to the computer.
Please let me know if you need any further assistance.

I-phone not being recognized by computer , crashed during an update...

i-phone not being recognized by computer , crashed during an update...

i am boycotting apple after i fix this issue. they are a terrible company.

XML file not being read by Accordion Demo

I had this working last week and it was a beautiful thing. I
subsequently added many more product items to the products.xml file
and resent it, now the products.xml file is not being read by the
index page. I have read all the posts and added all the suggested
fixes -
added {useCache: false} to result in var dsProductFeatures =
new Spry.Data.XMLDataSet("products.xml", "products/product[name =
'{dsProducts::name}']/features/feature",{useCache: false})
added <cfheader name="Cache-Control" value= "no-cache">
<cfheader name="Expires" value="0">
<cfheader name="Pragma" value="no-cache"> to header
added var d = new Date();
var cToday = d.getSeconds();
var spryURL = "
http://localhost:8500/SpryMe/Sample1/employees.xml?cacheBuster="
+ cToday; to header
but my xml file is not being read. The script is running
because the little fields on the right are moving.
Any suggestions would be greatly appreciated!

Hi,
What's happening if you open the xml page (employees.xml)
directly in browser. Are you able to see all the records? Is the
XML valid?
Regards,
Dragos.
PS: do you have a public URL where we can see that?

Check box in a table not being read on auto read by JAWS(Screen Reader)

Hi Experts,
I am working on Accessible pages in ADF. Check box in table is not being read on "Auto Read" function by jaws. Auto read is a function that allows the user to start the screen reader at the top of the page and read the entire thing that is provided by JAWS. I have even specified label property for af:selectBooleanCheckbox. Can anyone help me regarding this issue.
Regards,
Santosh.
Edited by: 930871 on Jun 13, 2012 6:54 AM
Edited by: 930871 on Jun 13, 2012 7:25 AM

Can anyone help me on this issue. This is really urgent.

My ipod shuffle is not being recognized by Computer, laptop or itunes. But im able to charge it externally ! What can i do to rectify this ?

My ipod shuffle is not being recognized by Computer, laptop or itunes. But im able to charge it externally ! What can i do to rectify this ?

Have you tried each and every single suggestion in this Apple support document yet?
iPod not recognized in 'My Computer' and in iTunes for Windows
Has this iPod Shuffle ever been able to successfully connect with this PC and sync with iTunes or is the first time you are connecting the iPod Shuffle to this PC?
B-rock

My 3rd gen ipod nano is not being read by itunes when I plug it into my mac laptop. It says "no name" on the mac screen, I lost all my music on the ipod itself.

My 3rd gen iPod nano is not being read by my iTunes on my mac. When going to sync, the mac screen says "no name". Also I believe I lost all the music on the iPod. When turned on it says "Welcome" as if it is new. I tried to copy all my music into the "no name" folder and then sync. The iPod said it was "syncing".

So does iTunes see the iPod or not? I couldn't quite understand from your post as you said it wasn't, but then said that the iPod was syncing...
B-rock

Video Ipod not being read by CPU(Need Help other post did not help)

My 30G Ipod is not being read by the coumputer, I tunes, or even the Ipod restore software. When i plug in my pod it turns on and charges...i can play music. When i turn it off there is a battery symbol and it says charging...i reinstaled ipod software...i did the two button reset, i tried it on all four of mr PC's Oh yeah...it make a soft high pitch noise when it charges.

I can't help I'm afraid! I have exaclty the same unresolved problem and getting severely miffed that a £300 product has suddenly became a heap of junk.
See it on ebay soon!

DV devise not being read by computer

Similar Messages

Maybe you are looking for