DV/DVCPRO codec for Windows XP
Does anyone know where to find and how to install DV/DVCPRO codec on a PC with Windows XP?
Apologies if it's a stupid question, but need to know.
Thanks.
As much as it pains me to reference Microsoft's site, here you go:
http://support.microsoft.com/default.aspx?scid=kb;en-us;142731
This article explains how to add codecs to your Windows machines.
You can find codecs here:
http://www.free-codecs.com/
Similar Messages
-
Hi guys,
is there any IMX codec for windows so i can easly export my grahics from my PC to FCP without rendering? CMIIW
Many Thanks,
BayuHappy to help out, but you need to identify what cam or sequence settings you use to create the HD sequence.
HD means so many things, including HDV and DVCProHD.
What is it?
And what did you choose to export to that create a smaller movie file for use on the PC?
Because it seems you have converted the original footage to something else, otherwise the size would be the same.
You might try an export to h.264 that should work if your friend is using v.7 of QT on Windows. -
FCP Quicktime Codec for Windows
I have an HD sequence that I exported using Export to Quicktime (movie is self contained); This gives me a .mov file that is uncompressed and has a smaller file size than any other way I export. I tried to play the file at my friends house on his PC but we couldn't. I'm assuming this export method uses a specific codec that my friend doesn't have. If this is the case, do you know if or where he could DL the specific codec. I googled it, but to no avail. If I'm completely off base with the whole codec thing could someone please point me in the right direction? Thanks
Happy to help out, but you need to identify what cam or sequence settings you use to create the HD sequence.
HD means so many things, including HDV and DVCProHD.
What is it?
And what did you choose to export to that create a smaller movie file for use on the PC?
Because it seems you have converted the original footage to something else, otherwise the size would be the same.
You might try an export to h.264 that should work if your friend is using v.7 of QT on Windows. -
FCP Uncompressed 4:2:2 Codec for Windows QuickTime
A client of ours can't play movies rendered in Final Cut Pro Uncompressed 10-Bit 4:2:2 on his Windows Vista 64-Bit PC. I have not been able to find out if there is a Windows QuickTime plug-in that will allow him to play these files (as there is for Macs without a FCP install).
Is there such a thing? Or will these files only play on a Mac?
Thanks!See if these are of any help
http://wiki.multimedia.cx/index.php?title=SheerVideo
http://www.bitjazz.com/en/products/sheervideo/ -
Aplle HDV codec for Windows...?
Hi All
We need to install a Windows version of the Apple HDV codec onto our Cleaner Encoding System we have at our place. Does anyone know where to find this or if one is even available?
Thanks. DonIsn't it part of QuickTime 7?
-
FCE Codec For Windows Media PLayer
Hey guys, I'm trying to render a video which can be played on a pc via WMV. I've been trying to convert it to different formats, etc avi, mpeg 4, and quicktime, but nothing seems to work. Any one have any ideas....
If you're trying to create a standard DV clip to maintain resolution, one that will play on a PC to the projector using the WMP then you have to either use WMV or AVI.
The AVI has to be in DV NTSC, 720x480, at 29.97fps. That's what the DV is, nothing else. There is no such thing as widescreen DV. It's always anamorphic. It's not going to play well on any computer, unless it's playing back off a media supported drive through a digital/analog converter onto an NTSC monitor or TV set because the material is interlaced and the computer display is not.
To do this properly you need to deinterlace the material. I believe you can do that with Flip4Mac when you convert to WMV. That would be your best option. -
A DNG Codec for Win7 64bit...Please?
Seriously, It's high time that Adobe
released a salient codec for Windows 7.
Yes...I do like to see pictures rather than some silly icon in Windows Explorer colorspace be damned.
But absent that...Anyone got a line on a free (non-trial) DNG codec for Windows 7 64-bit?
And, Adobe, Microsoft, Y'all play nice now.Well I downloaded and installed the (latest?) 'dngcodec_r2_042711.exe' codec today ....and it didn't work.
Windows Explorer used to show a basic 'DNG' icon for each file ...Now it just shows generic 'picture' icons instead. Not a lot of help.
I have win7 64-bit, Lightroom 4 etc. and used the 'Make copy as dng' menu option to generate DNGs from Nikon NEF (raw) files, already present on the hard drive, as I wanted to get away from the cumbersome additional 'sidecar' files generated by the ACR engine but it seems I am stuck with them until someone (Adobe, can you hear this?) comes up with a suggested fix or something.
Anyone any ideas? -
HDV playback in Quicktime for Windows
how do i get HDV Quicktime files to play in Quicktime Pro for Windows? thanks. . .
Sorry, but to the best of my knowledge, there is no Apple HDV codec for Windows. I believe you'll have to convert the files on a Mac to a format the Windows version can play.
-
It's for my grandfathers funeral video tomarro and i can't get the songs i just purchased on itunes to work. They play but wont work when i drag them to the movie maker program. it says that the codec for the song isn't installed. codec?
werm21 wrote:
It's for my grandfathers funeral video tomarro and i can't get the songs i just purchased on itunes to work. They play but wont work when i drag them to the movie maker program. it says that the codec for the song isn't installed. codec?
The songs you purchased are in AAC format, which Windows Movie Maker cannot handle. You can use iTunes to make MP3 versions by following this guide: http://support.apple.com/kb/HT1550 and the MP3s will work fine.
Note that when iTunes does a conversion it creates a new file and leaves the original in place. Make sure you are grabbing the new MP3 for your movie and not the original AAC.
Sorry to hear about your grandpa. -
Hello, I am editing my final project at university on Premier Pro CC on mac, but when I try to load my project in Premier Pro CC for windows on my home pc i get "codec missing or unavailable". Something to do with Apples' ProRes 422 LT codec. Is there a way round this problem?
I just went to the Miraizon site, who has been the sole licensee of ProRes for PC, to see if their $150/license download was still at that price.
This is what I found ...
They only sell a few of their other products, and the ProRes/DNxHD codec package only generates an email form to "support".
I'm afraid you'll have to transcode those files to something like DNxHD or an avi codec or something to work them via PC. And I'd thought about purchasing that codec pack from them but kept putting it off. Now, I wish I'd bought it. Ah well.
Neil -
Idt high definition audio codec driver for windows 8.1
I installed Windows 8.1 and now I don't have any sound coming from my HP ENVY23. I get an error message about IDT High Defionition Audio CODEC has a driver problem. I suspect the driver needs to be updated for Windows 8.1 but I cant find the driver.
Jminichiello84, welcome to the forum.
Here is a driver . It is not for a desktop, but you can give it a try.
When requesting help you should always include the make/model of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee. -
Microsoft Camera Codec Pack for Windows 10?
Is there a version of Microsoft Camera Codec Pack that works in Windows 10 technical preview? I'm having problems installing the latest for Windows 8.1, more accurately it won't install whatever I do, regardless of compatibility mode.
I may have expressed myself badly. I did not had problems with this in Windows 8 and 8.1.
I am only having problems installing the Microsoft Camera Codec Pack in Windows 10 (to be more specific, Enterprise Edition, build 9926).
My best guess is the changed system numbering is behind the problem, which you pointed out right. -
Call/video not working between Cisco jabber for Windows and VCS control C40s
Hello,
I've been struggling with no luck how to make a call using Cisco Jabber for Windows 9.6.0 registered to CM 8.6.2 with intercluster ICT to another CM 8.6.2 where we have a VCS Control 7.0.2 via GK H225, and all C40s are registered as H.323.
The VCS has interworking between H323 and SIP, however not sure if there is any problem with that. Assuming it is ok, not sure either if I'm facing any interoperability issue because in my remote site I have C40 (H323 registered at VCS and SIP listening mode) and cisco jabber for windows which is SIP based.
If is not possible, would I be able to change my C40 from H323 to SIP at VCS, or have both H323/SIP registered at VCS? If so, will I need to change as well instead of GK I'll have to establish a SIP Trunk between the CM and VCS?
Another thing I do not believe either I would be able to have one VCS connected with two clusters, right?
I'm just trying to find a solution in case my current topology is not compatible, but feel free if you have any better idea to make it work.
Anyway here is what is happening:
When I make a call from my cisco jabber windows to C40 using alias number. The call is being redirected just fine to the C40 and it rings, however when someoene or the auto answer picks it up, the call dropped right away.
However, if I enabled the MTP in my CSF device, the call gets longer before dropping. I was even able to see my jabber " start video" turns green, before was grayed out all the time and the call dropped faster. I hear a fast busy tone.
I'm able to provide SDI traces, logs, diagnostic sip/h323 calls from VCS in order to know for sure if this is an incompatible issue or something I can workaround.
Let me know if someone of you are interested in read these logs or could point me on the right direction.
Thanks!Ok,
I have looked at both logs. I have to mentinon though that you didnt
provide the log that shows the h323 setup between cucm and the VCS. This
is most likely because the call originated from a different cucm than
the ones you provided the logs from.
The call would have orginated from the first cucm in the cucm group of
this trunk: Name=RL_TRUNK_VIDEO
The cucm ip will be : 10.252.53.10.
This is the VCS log that confirms where the h323 request originated
from:
pr 10 22:50:29 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:29,187"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="54000"
Received RAS PDU:
Having said that here is my analysis of the logs that you sent..
Jabber sent an INVITE to CUCM and advertised all the codecs (audio and
video it can support)..
Observer that Jabber says it doesnt support G729 anexB
21:55:16.576 |//SIP/SIPTcp/wait_SdlReadRsp: Incoming SIP TCP message
from 10.223.20.73 on port 54677 index 90661 with 2220 bytes:
[862370,NET]
INVITE sip:[email protected];user=phone SIP/2.0
Via: SIP/2.0/TCP 10.223.20.73:54677;branch=z9hG4bK000029d3
From: "4122107" <sip:[email protected]>;tag=00059a3c78000011000070b0
-00000e65
To: <sip:[email protected]>
Call-ID: [email protected]
Max-Forwards: 70
Date: Fri, 11 Apr 2014 01:55:16 GMT
CSeq: 101 INVITE
User-Agent: Cisco-CSF/9.4.1
m=audio 19252 RTP/AVP 0 8 18 105 104 101
c=IN IP4 10.223.20.73
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:105 G7221/16000
a=fmtp:105 bitrate=24000
a=rtpmap:104 G7221/16000
a=fmtp:104 bitrate=32000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=sendrecv
m=video 28878 RTP/AVP 97
c=IN IP4 10.223.20.73
++++Now lets observer the capabilites exchange during h245 negotiation
between cucm and VCS++++
Here CUCM advertises its caps to VCS (afterreceiving caps from VCS)
Note that G729A, G729AB, G729 is all advertised..
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,017"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : terminalCapabilitySet
capabilityTableEntryNumber 2,
capability receiveAudioCapability :
g729wAnnexB : 6
capabilityTableEntryNumber 3,
capability receiveAudioCapability : g729AnnexAwAnnexB : 6
capabilityTableEntryNumber 4,
capability
receiveAudioCapability : g729 : 6
capabilityTableEntryNumber 5,
capability receiveAudioCapability :
g729AnnexA : 6
++++++
After doing MSD (master slave determination, we move to the OLC phas e..
Here we see that the far end..c40 wants to use G729AB for media++++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,783"
Module="network.h323" Level="DEBUG": Src-ip="10.224.114.11" Src-
port="11163"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
dataType audioData :
g729AnnexAwAnnexB : 20,
multiplexParameters
h2250LogicalChannelParameters :
+++Next VCS sends G729AB as the codec to use to CUCM+++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,784"
Module="network.h323" Level="DEBUG": Dst-ip="10.252.53.10" Dst-
port="45660"
Sending H.245 PDU:
value MultimediaSystemControlMessage
::= request : openLogicalChannel :
forwardLogicalChannelNumber 1,
forwardLogicalChannelParameters
dataType audioData :
g729AnnexAwAnnexB : 20,
multiplexParameters
h2250LogicalChannelParameters :
++++The next thing we get is an OLC reject from CUCM and this is where
th call drops++
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="45660"
Received H.245 PDU:
value MultimediaSystemControlMessage
::= response : openLogicalChannelReject :
forwardLogicalChannelNumber 1,
cause dataTypeNotSupported : NULL
Apr 10 22:50:31 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:31,790"
Module="network.h323" Level="INFO": Dst-ip="10.224.114.11" Dst-
port="11163"
Detail="Sending H.245 OpenLogicalChannelRejResponse
+++We then receive a call release from cucm with cause code of 47:
resource unavailable++++
Apr 10 22:50:32 TWELDVCS01 tvcs: UTCTime="2014-04-11 01:50:32,365"
Module="network.h323" Level="DEBUG": Src-ip="10.252.53.10" Src-
port="50913"
Received H.225 PDU:
Q931
Message Type: Release
Complete
Call reference flag: Message sent from originating side
Call reference value: 0x7b
Info Element : Cause
Location: Usr
Cause Value: Resource unavailable
Info Element : User User
Length = 22
Suggestions:
Change the region setting between the ICT trunk to VCS and Jabber to use
G711 and test again. -
Jabber for Windows 9.2 call stats
Does anyone know how to view call stats in Jabber for Windows 9.2 (or if it is even possible)?
Thanks, MikeNo. I mean call stats like dropped packets, codec, video resolution etc. I heard from my Cisco SE that Cisco doesn't have any immediate plans to implement this feature, which I think is a terrible oversight. How are we supposed to troubleshoot with call stats? Even an IP phone has ability to do that.
-
Jabber for Windows 9.2 and iLBC ?
We run iLBC across our wan between sites.
Does Jabber for Windows 9.2 or a newer version of Jabber for Windows support iLBC?
I can't find details in the Data Sheets about what codecs Jabber for Windows supports.The answer is no. That ilbc is not supported with Jabber for Windows 9.2.1;
g.722.1
Note
g.722.1 is supported on Cisco Unified Communications Manager 8.6.1 or later.
g.722.1 32k
g.722.1 24k
g.711
g.711 A-law
g.711 u-law
g.729a
Supported Video Codecs
H.264/AVC
Refrence
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_2/JABW_BK_C9731738_00_jabber-windows-install-config/JABW_BK_C9731738_00_jabber-windows-install-config_chapter_010.html#JABW_RF_A8E7D898_00
Maybe you are looking for
-
Time Machine to Snow Leopard not working
Ok, so this issue appears to be multi-faceted so please bear with me as I try to fully explain what's happening. I have a mid-2009 Macbook Pro with OSX 10.6.8, and I decided to give Yosemite a try since it was free. Before upgrading, I did a Time Mac
-
How to manege my photo's on my iphone?
I just downloaded the new iphone software and now all my photo's that where in my computer are now in my iphone! How do i manege that? I can not find the place within itunes to select pictures and drag them from the computer to my phone! Please help!
-
Cannot make Canon PIXMA MX922 fax to work with "Windows Fax And Scan" on Windows 7, 8.1
I have Canon PIXMA MX922 multifunction printer installed wireless on iMac OS X Mavericks. It works great but there is no fax drivers for Mac. I have Windows 7 and Windows 8.1 installed on Parallel Desktop. I am able to print and scan on these machine
-
Issues with a customized extractor running 'Full' loads.
Hi Gurus, Is it possible to check at what date/time a particular data record has been posted in the VBPA table [Sales Document Partner Function Table]? My issue is that we have a customized extractor that pulls data from both the VBAP & VBPA tables b
-
IPhone 5 stuck in recovery mode (Error 2006 (Mac) 2009 (Windows)
Hi everyone, my iPhone 5 has just randomly stopped working. It's out of warranty so Apple won't help at all. The screen just wouldn't turn on at all so I opened it up and checked out all the connections and somehow I got the screen on, when plugged i