DV export problems with grid line noise on export

On exporting in Premier Pro CC I am seeing faint grid lines across the whole picture that are not in the project timeline or the source clips - in other words looks fine in the project but not when exported out. Looks a bit like moire pattern but much more regular dotted box pattern about 5-10 pixel regular box size across whole image in grid - very odd. The noise pattern is not on the source or from camera chip I don't think - although that's what it looks like when sharpness is too hard on camera settings or chip structure bleeds through.
Have been using sharp filter and preset colour balances but as I say look OK in timeline but not after export. Tried using with and without high quality render - no difference.
I am using DV25 as the export format and I am working on a high end Mac Pro with the latest version of CC.
Very frustrating issue as ruins quality of output - any thoughts gratefully received!

Hi Jim,
I have viewed in Quicktime 10 and in Final Cut 7 (where I sometimes go back to to use the Neat Video plug-in for noise reduction)

Similar Messages

WRT160N - problem with on-line games and downloading

Hi,
Several months ago I bought a WRT160N router and I have a strange problem.
When I play online games, such as QL, and someone else will start downloading from the Internet, from time to time about 10 sec I have 999 ping
I turned on in the background ping to the router, and from time to time about 10 sec there are 2-3 ansewers with 1900-2000 ms.
I tought that when I buy router with N-mode everything will work better, and there will be no problems with on-line gaming.
Is there any way to fix this problem??

I checked now and even no one is downloading there is the same problem.
I checked on other router and it works fine.
Next problem is when I browse youtube and play several films simultaneously, suddenly there are no responses from router, when I close them, and wait for a moment the responses are back.
Whether anyone had similar problem??

Aperture 2.1.3 Export Problems with Cropped Photos

I ran into an odd problem after updating to 2.1.3. I was trying to upload to a Picasa album via "aperture-picasa-plugin", which I had used before without problems. The resulting export had problems with two photos I had cropped from landscape to portrait size. The resulting exports had the entire uncropped/original content "squeezed" into a photo matching the cropped size, so the exported pics were squished making everything look tall and skinny. (I found it especially odd that stuff I had cropped out was back in, but the size was cropped.)
I assumed it was a problem with the plugin, so I exported to a file straight from Aperture and had the same problem. I had other crops that worked OK, but they appear to all be landscape to landscape with no change in aspect ratio.
Is anyone else having this problem?

YES!
I have seen this show up as well. I'm also using Aperture 2.1.3. I too thought it was the fault of the picasa plugin... but when I, like you, started doing my exports directly to files I noticed that they still had the same problem.
The horizontal 16x9 seems to be particularly vulnerable... And, yes, it almost looks as if the (pre-crop) master has been "squished" into the aspect ratio of the (post-crop) version. It is very strange, very annoying, and very intermittent. Although, I found that if I quit aperture, restart then re-export... I have better luck.
Boy, am I relieved to find somebody else who is having this problem. For a while there I thought I was going nuts.
-C.

What does a gray icon with grid lines mean? It looks like a bullseye.

What does a gray icon with grid lines mean? It looks like a bullseye.

It's an app icon that didn't load properly .... If it looks like this.

Export problems with pages/ save as word document results in corrupted text

This may be a new problem with Pages as I have not seen this happen with previous versions but, when I export a page made with a template, it ends up with merge problems - headers end up at the foot and invisible text regarding merge showing. When saved, a error box opens saying that merge fields are not save or similar, and I end up with a non friendly .doc file.

morayshire wrote:
This may be a new problem with Pages as I have not seen this happen with previous versions but, when I export a page made with a template, it ends up with merge problems - headers end up at the foot and invisible text regarding merge showing. When saved, a error box opens saying that merge fields are not save or similar, and I end up with a non friendly .doc file.
Here are alert messages related to 'Word Exporter'
/* Word Exporter */
"Cells with unsupported number formatting were exported as text." = "Les cellules comportant un format numérique non pris en charge ont été exportées sous forme de texte.";
/* Word Exporter */
"Change tracking isn\\U2019t supported for cell image fills. Original cell image fills were removed." = "Le suivi des modifications n’est pas pris en charge dans les remplissages de cellule par image. Les remplissages de cellule par image d’origine ont été supprimés.";
/* Word Exporter */
"Change tracking isn\\U2019t supported for cell image fills. Tracked changes for cell image fills were accepted." = "Le suivi des modifications n’est pas pris en charge pour les remplissages de cellules par image. Les modifications effectuées pour ces remplissages ont été acceptées.";
/* Word Exporter */
"Change tracking on floating objects isn\\U2019t supported. Tracked changes were accepted." = "Le suivi des modifications sur les objets flottants n’est pas pris en charge. Les modifications ont été acceptées.";
/* Word Exporter */
"Comments on anything other than body text and inline objects aren\\U2019t supported and were removed." = "Les commentaires sur un autre élément que le corps de texte et les objets incorporés ne sont pas pris en charge et ont été supprimés.";
/* Word Exporter */
"Durations formatting isn\\U2019t supported and was exported as text." = "Le formatage des durées n’est pas pris en charge et a été exporté sous forme de texte.";
/* Word Exporter */
"Footer rows aren\\U2019t supported and were converted to regular rows." = "Les rangs de bas de tableau ne sont pas pris en charge et ont été convertis en rangs standard.";
/* Word Exporter */
"Formulas referencing cells with custom number formats aren\\U2019t supported and were replaced by the last calculated value." = "Les formules faisant référence à des cellules comportant des formats numériques personnalisés ne sont pas prises en charge et ont été remplacées par la dernière valeur calculée.";
/* Word Exporter */
"Formulas referencing durations aren\\U2019t supported and were replaced by the last calculated value." = "Les formules faisant référence à des durées ne sont pas prises en charge et ont été remplacées par la dernière valeur calculée.";
/* Word Exporter */
"Hidden footer content was removed." = "Le contenu du pied de page masqué a été supprimé.";
/* Word Exporter */
"Hidden header content was removed." = "Le contenu de l’en-tête masqué a été supprimé.";
/* Word Exporter */
"Hidden rows and columns were removed." = "Les colonnes ou rangs masqués ont été supprimés.";
/* Word Exporter */
"Japanese footnote or endnote numbering isn\\U2019t an exact match." = "La numérotation japonaise de note de bas de page ou de fin ne concorde pas exactement.";
/* Word Exporter */
"Links to external Pages documents aren\\U2019t supported and were removed." = "Les liens vers les documents Pages externes ne sont pas pris en charge et ont été supprimés.";
_/* Word Exorter */_
_"Merge fields were exported as regular text, not as merge fields." = "Les champs de fusion ont été exportés comme texte standard et non comme champs de fusion.";_
/* Word Exporter */
"One or more formulas aren\\U2019t supported in the chosen file format and were removed. The last calculated value was retained." = "Une ou plusieurs formules ne sont pas prises en charge dans le format de fichier sélectionné et ont été supprimées. La dernière valeur calculée a été retenue.";
/* Word Exporter */
"Some paragraph border rules couldn\\U2019t be exported." = "Certaines règles de bordures de paragraphe n’ont pas pu être exportées.";
/* Word Exporter */
"Table cell comments can\\U2019t be exported if there are any comments attached to the entire table. The table comments were exported, but cell comments were removed." = "Les commentaires de cellules de tableau ne peuvent pas être exportés si des commentaires sont associés au tableau entier. Les commentaires de tableaux ont été exportés mais ceux de cellules ont été supprimés.";
/* Word Exporter */
"Table cell fills other than solid colors aren\\U2019t supported and were removed." = "Les remplissages de cellules de tableau autres que par des couleurs unies ne sont pas pris en charge et ont été supprimés.";
/* Word Exporter */
"Table image fills aren\\U2019t supported and were removed." = "Les remplissages de tableau par image ne sont pas pris en charge et ont été supprimés.";
/* Word Exporter */
"Tables with more than 63 columns aren\\U2019t supported. Columns 64 and highger were removed." = "Les tableaux comportant plus de 63 colonnes ne sont pas pris en charge. Les colonnes 64 et au-delà ont été supprimées.";
/* Word Exporter */
"The page layout document was exported as a word processing document." = "Le document de mise en page a été exporté comme document de traitement de texte.";
*_This gives us a simple way to convert a Page Layout document into a Word Processor one. Export it to Word, import the .doc file._*
/* Word Exporter */
"WECannotMapNumberFormat" = "Le format numérique non pris en charge a été remplacé par le format numérique par défaut (1, 2, 3…).";
Yvan KOENIG (Vallauris, FRANCE vendredi 7 août 2009 21:18:06)

Intermittent problem with the line

I have an intermittent problem with my line which crackles or you miss parts of a conversation because voices spoken or listened to keep coming and going all the time or the phone cuts out altogether
Telephone the help line which said that the line was OK at that moment as they did the other time I called keeps on happening on a daily basis every time we get a call.
Next door neighbour and other neighbours around this close all linked to the same local bt or open reach cabinet all tell me they have the same problem.
Neighbours called their own phone company who rent the line off of BT who got an open reach engineer out the next day and found that the local exchange or cabinet next to the house across the road from me all the phone line coverings have corroded away and that the wires are all damaged and corroding away or rotting away.
So the local road (culdisack) has to be dug up and the exchange and wires have to be replaced from that junction box to the next junction box or exchange, what i want to know is when will this be done as all the neighbours and i have been reporting it to BT for ages but it was not till next door got their company to investigate was the problem found.
How long till we have to wait for a repair and better lines back to a good service, Months, years. when?
It would not be so bad but i have a lifeline connected to my phone so if i am in trouble it calls for help but with the fault with the line half the time it cannot get a single message or call out and before now i have been left on the floor for ages before someone came back home to get me off the floor as the box just said the phone line was disconected and could not get a dial tone or call out.
Tim

If you would like to contact one of the UK based BT Care Team who moderate this forum, they should be able to find out what is going on.
They can be contacted using this link BT Care Team
They normally respond by phone or e-mail, within three working days, however you should get an immediate confirmation, with a tracking number.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

X-Fi Notebook has a problem with headset/line-in

0X-Fi Notebook has a problem with headset/line-in` First the basics:
-HP Pavillion dv6000
-Intel Core 2 Duo @ .83 GHz
-Windows Vista Home and Student (SP) 32 bit
-3 GB RAM
Ok, now the problem:
-Ever since I got my Sound Blaster X-Fi card for this past christmas, I've had a problem with using the headset/lin-in port on it. Its only now that it's gotten to be a big enough irritation for me to need to fix it. I went to play some BF2 and hook up my earphone/microphone combo. The problem is, that the default recording device "Line-in" doesn't detect any sound when I have it plugged in. Further more, when I change it to "SB X-Fi micropone" it does detect my voice, but its on some kind of feedback loop, because it then transmits whatever the mic picks up onto my speakers/headphones/whatever I have plugged into it as an output. Its almost like they have the "line-in" and "microphone" functions either switched or blended into one. I did a complete reinstall of the drivers and software, but no luck. Any suggestions would be much appreciated.
Thanks guys

Hi,
What I mean is the microphone jack on your x-fi notebook. since you are saying you can hear yourself when you switch the recording source to microphone, I would assume that you have plugged in a microphone into your x-fi notebook. You should check if there is a microphone control on your volume mixer and whether it is unmuted if there is one. There are many sound card which allows for the microphone audio to be heard on the speaker output if the microphone source is unmuted.
Message Edited by flipflop on 03-29-2009 09:03 [email protected]

Problems with horizontal lines on the iMac. Someone knows the solution?

For several months my Imac has horizontal lines have been growing. Problems with horizontal lines on the iMac. Someone knows the solution?

You have 14 days to return the computer w/no questions asked. Plus you have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems.
That being said, no new Mac comes w/Snow Leopard which your profile confirms you have.
Mac OS X (10.6.8)

Thin grid lines in PDF export

I am using the current version of Numbers (3.2).
The problem I am facing is that it seems to be impossible to export a spreadsheet with invisible grid lines to a PDF. Every time I do so, thin (I guess 1px) grid lines appear in the PDF where the should be none. I attached two images of a simple test sheet: The first picture is Numbers, the second is the resulting PDF export.
Any ideas how to fix this?
Thanks!

1) select the table, then
2) use the cell formatter to set the border type to none
3) apply the border all inside edges

Problem with phone line

Hi there,
I have been having problems with my phone line since May. The line is fine until one day I will pick up to make a call and there will be no dial tone. The tones on the keypad make a noise but the call doesn't happen. No one can get hold of me on my landline. When I get my son to do a line check the phone works again for a few days and then the problem starts again. This has all started since I got broadband. I have had two visits from engineers, the last one being Friday 20th August. That engineer told me he couldn't understand what was happening, he thought it might be the old underground cables and they couldn't cope with the broadband. I have the same issue again and am at my wits end. What should I do next?

Hi Coomrith and welcome
Did the engineer say whether he was going to escalate this?
You could email the forum mods - [email protected] with your name, account number, phone number and a link back to this thread. They may be able to offer some assistance.
-+-No longer a forum member-+-

Problem with dashed line spacing when printing to pdf

Hi all,
this may be a problem with my pdf program (I use bluebeam), but maybe someone will have an idea how to fix it whether in indesign or bluebeam.
so I made a dashed line using the stroke command in indesign. I need to have the spacing set to 3pt dash and 2pt space. I also need to keep the lineweight to 0.5...this all works fine and appears correctly in indesign when I preview
the problem is that some of the dashed lines, but not all of them, change size and spacing in the pdf when I view it. it seems to change when I zoom in and out as well. I thought maybe this was just some odd feature with bluebeam and it would still print to the correct size, but it does not, it prints the lines as different sizes. does anyone have an idea why this happens and how to fix? ive viewed and printed from adobe reader and it seems to be okay there but this file will be accessed by multiple other people and they may not be opening and printing in adobe reader..
thanks guys

When you export a PDF you will notice that you are exporting to Adobe PDF. Using any reader beyond Acrobat Pro or Reader is a crapshoot.
For issues with Bluebeam I suggest you contact the developer.

Problems with QCM tables in DB export

Hi gurus, I have a problem with an export that I'm performing, the problem is that the R3SETUP is trying to export a QCM table "QCMT066" but this table doesn't exits in the database.
(EXP) ERROR: DbSlExeRead: rc = 107, table "QCMT066"
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
The R3 system is a 4.6C and runs over HP-UX 11 64 bits and Oracle 8.1.7
I read and search SAP notes and inside the SAP forums, but I didn't find anything that could help me.
The transaction SM13 says that --> **** No update records found **** when I execute without client, user and date parameters.
The transaction SE11 says that the table in fact doesn't exits in the database, and if I execute a select sentence (SELECT TABLE_NAME FROM DBA_TABLES WHERE TABLE_NAME LIKE 'QCM%') I can see that there is no table with this name.
In transaction.
The transaction SE14 > Extras> Invalid temp. table show the text " ... List is empty "
So please, Do you know what I could do to solve my problem?.
Thanks and best regards
Edited by: Juan Francisco Estrada Garcia on Sep 3, 2010 11:02 AM

Thank you, that is just what I did.
I found this [tread|r3load export error ORA-00942 for table QCMBTXBLOK; where the people talk about .TKS files, but the version that I'm trying to migrate is too old, and the R3LOAD doesn't use TKS files, so I edited every file(.EXT, .STR, .TOC) that contains references to QCM* tables. I deleted every line related with this kind of tables, and finally everything work and the export ended successfully.
Thanks

Problem with Materialized Views after an export

Hi @ everybody,
At an Oracle 11g R2 (11.2.0.3.0) instance, all actual CPU's/SPU's are installed, on a Red Hat 6 Machine i have a problem with Materialized Views from a schema, which i have exportet from an old database machine on Oracle 10g (10.2.0.1.0) to the new machine.
I've exportet with the old exp and imported with imp, because i know, that i get some strange errors because of the materialized views when i'm using the new expdp and impdp tools.
At the old machine the materialized views are so programmed, that they get an update of data at a defined time like this:
START WITH TRUNC(SYSDATE) + 21/24
      NEXT SYSDATE+1
...But after the export this "update function" of the materialized view is not available. So i have deleted that views and recreated them with the START WITH parameters. So now they are running.
But why do i have this problem?
Is this "START WITH" somewhere written as a job or so in, for example, DBMS_SCHEDULER or something else? So i had forgotten to export these jobs or where is that defined?
Is this a bug?
Thanks for answers and help!
Best regards,
David

I can't remember the error of expdp/impdp. That is some days ago, i have to rebuild this.
I think in my scenario for the import i don't need the TABLE_EXISTS_ACTION, because by importing at the new server i've just createt the naked tablespace for the data and the users, not more. So he didn't has something to overwrite.
And i have to tell you: i'm just the dbA. The desining of the tables and materialized views is many years ago by installing the old server. I'm just to young in my company to know about the design of the instance and why it was designed so.
Anyway: my problem is, that after the import of the schemas to a new server the "START WITH" option in the materialized views is not there anymore and i just want to why so i can think about a solution for that and create it with the database designers of my company.
EDIT: And here are the SQL Statements for creating the Materialized Views:
First, at the OLD Server (Oracle 10g 10.2.0.1.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)And here the at the NEW Server (Oracle 11g R2 11.2.0.3.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS" ("CLIENT_ID", "ILN_USER", "EAN", "CODE", "ARTICLE_TEXT", "LANG_CODE", "LANR", "OLD_LANR", "ITEM_BY_NO", "UOM_UNIT", "PRICE_UOM", "PRICE", "CURRENCY", "PRICE_QTY", "SALES_UNIT", "START_DATE", "END_DATE", "UPDATED_AT")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)The own differences i can see is at the "header". In the new one is the NOCOMPRESS LOGGING Option and in the first line the code has the columns diretcly defined.
But, i think, for my problem this line is determining:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1And this line is the same at both server.
Edited by: David_Pasternak on 12.04.2013 00:06

Problem with phone line not ringing

Hi, I have a problem with my landline, it appears to ring out but isnt, no one can ring me as it says Im busy and bt cant check my line because it says Im busy..
My phoneline died in my bedroom ages ago, so now rely on the main socket only..
Can you pls advise me on what to do?
Im disabled, so cannot plug and unplug but my daughter or grandson will be up later this afternoon if that needs to be done..
Many thanks Ann

Please ask them to follow the instructions on this site http://bt.custhelp.com/app/answers/detail/a_id/9812/c/345,353
If they think the fault is outside of your house, then they can report the fault here.
https://www.bt.com/consumerFaultTracking/public/faults/tracking.do?pageId=2&s_cid=con_FURL_faults
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problem with table line (footer) in smartform

Hey guys and gals !!!
I have got this problem with the footer line in my smartform.I have checked the <i>no pagebreak</i> option for this line but still some contents are getting truncated instead of being shown totally on one page.
The line has two cells.The first cell has 4 text nodes and the second cell has 1 text node.
I am able to see just the text from the 1st text nodes while the others are getting truncated.
Please suggest a solution.Your help will be greatly appreciated.
Kind regards,
Greenidge Gonsalves
SAP Technical Consultant

Hello,
The problem is not clearly explained.
However, I assume that you have a footer which is NOT a part of MAIN Window and a table has been defined and only the contents of the First TEXT node is getting printed while others are getting truncated.
If my understanding is right,
1. It is getting truncated because the text is more than the size of the window that has been defined.
2. I suggest you, if the contents (size) of the footer varies from output to output, then better to shift the footer to the MAIN Window so that you will see the complete text.
I hope this helps you.
Regards, Murugesh AS

DV export problems with grid line noise on export

Similar Messages

Maybe you are looking for