DV(PAL) Capture via IEEE1394-Interface does not work

I use Avid Media Composer version 8.3 for video editing, and for capturing of DV/HDV-tapes with a JVC tape deck BR-HD50E (PAL). While cpturing of HDV works fine, the deck does not answer to Media Composer when set in DV-mode. Same deck same version
of Media Composer under Windows 7-64 Ultimate runs well. However, in Windows 7 I have to select the "legacy" driver for IEEE OHCI controller. In Windows 10 a "legacy" driver is not available.
Joachim
Joachim Claus

Similar Messages

Erlang: wx graphical user interface does not work in R16B-1

After upgrading erlang to R16B-1, the wx GUI subsystem does not work anymore.
1> wx:demo().
ok
=ERROR REPORT==== 5-Mar-2013::23:13:11 ===
ERROR: Could not find 'wxe_driver.so' in: /usr/lib/erlang/lib/wx-1.0/priv
Should I install some additional package that was not required before?
Or is this a bug with the new version?

This seems to be a bug with the new version.
See also: https://bugs.archlinux.org/task/34201
Last edited by xyproto (2013-03-08 19:59:03)

Custom shortcuts addee via Keyboard.prefPane does not work..

Hi,
I read several sites that all refer to a way to create a shortcut for a menu command without one, ref.: <http://www.apple.com/pro/tips/keyboard.html>
However, that does not work at all for me. Never has. So what I am doing wrong? In particular, I would like to add a shortcut to open the main window of Address Book, after closing the window leaving the app running.
Anyonw could do me a run through? Cause the above mentioned procedure does not work.
Johan
PS: Oh, and in iPhoto I am not able to create a new film roll for the selected photos, even though I am following the exact procedure mentioned in Help..
PB G4 12" Mac OS X (10.4.8) 768MB

Welcome to our community
The issue is typically a matter of focus. Particularly in Firefox. In IE, when the page loads and is presented, the Flash object (your Captivate movie) is given focus. So the keyboard shortcuts work. But that doesn't happen in Firefox. In Firefox, you must first click somewhere on the Flash object to give it focus. From there forward, shortcuts work because the Flash object is now listening for them.
In every class I facilitate I demonstrated this and advise that it's a good idea to have a button on the first slide. This serves two purposes.
It forces the user to click to proceed
It keeps the first slide paused until the user is ready
Yeah, before someone comes along and says: (in an annoyingly nasal tone) Mr. Man, you KNOW there is an option in Captivate to keep it paused at the start... I'm well aware that Captivate offers this option without adding a button, but I prefer it for the reasons above.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

CHROME is not compatible. Problem Solved: PayPal's new interface does not work with CHROME.

I've been trying to withdraw funds for days on my Chrome browser. I was about to throw my laptop out of the 3rd story window when I thought to try Firefox and it worked. I pray that someone in programming reads this. Note to Developers: PLEASE don't do major interface overhauls if your site is funcitonal. I have never seen a site get better after an upgrade. We don't care if PayPal looks hip. We want it to be a reliable tool for our businesses.

Yes... BUT there is large "Chrome" oriented large yellow note at the top of your accounts page that says ... this site uses Silverlight which will soon not be supported... So if you are using Chrome what are you doing when they remove Silverlight support? RSVP to my email on my account please. or... Post a note of yours that tells all of us what you recommend... go back to IE?

Uploading content via folio builder does not work

Hi,
Working in inDesign and having a problem with the Folio Builder.
Does anybody know what is going on when I have created a folio, then an article and the folio builder states 'Building Folio...Done' and there is a loading symbol suggesting the article is uploading but it never does. (see attached image). We are not subscribed to either Digital Publishing suite service so we are only allocated one Folio per Adobe ID. Could it be a conflict between a previously installed version (CS 5) of the Folio extentions, which was incorrect as we are working on C5.5 — I subsequently deleted the CS5 folder manually and installed the correct version for CS5.5.
Thanks,
Colm

Colm before you get help from our pros I will say what happened and worked for me.
I had the same problem and it took two whole days to solve it.
When things stopped working and the process was hanging I would have to kill In-Design. On Windows you go to the task manager and end the program.
This never seemed to cause a problem for In-Design. Right away I would restart the program and start over again and things would finally work.
Go to your Acrobat.com account and see if the file is there. Most often it is. Even though the builder was hung up some how the file ended up on Acrobat.com site.
Click on your cover file in Folio Builder and then try clicking on Preview. If you are able to view your file in Content Viewer on your PC then your problem
may be different than mine. I could not preview my file. Once this preview problem was solved all the other problems went away.
Consider these points as a starting point and then we will give you more ideas.
John

Printing via Airport Express does not Work

I have been using an Airport Express Basestation with my Mac Mini and Epson Stylus 880 for about a year without a problem. Now I have moved to an Intel iMac and cannot print via Airport anymore. The file get´s spooled but then I get an error message saying that the printer driver might be incompatible. If I use the same driver with the local USB port everythings works fine.
Please help,
Ingo

Ingo,
try this link:
<http://discussions.apple.com/message.jspa?messageID=1674987#1674987>
Deivy

Wrt54g v8 web interface does not load properly

Hi,
There is a similar thread concerning the v6 web interface, where the background loads, but no text and no links. I also see some data in my case, using a v8 router.
I do not want to start with a firmware upgrade since I am not sure which version I have, since the interface does not work. The v6 problem seemed to be related to Zone Alarm, but I am not using that. I tried shutting down my firewall - didn't help.
I am using Vista SP1, tried IE7 and Firefox.
One thing I did notice was that during router config using the supplied tool there was an error about failing to load a language pack. I wonder if there is anything I can do about that. The original plan was to use the web UI to investigate, but as I said, the web UI won't load properly.
Thanks

Insert the CD for the router setup .... do not run the Setup ,,,,,
Right click & explorer ... it shows folder for language .... open it ... & choose the sorrect language ...

Internet does not work after Installation of Oracle10g on SuSE 10 Enterpris

Hi,
I installed SUSE 10 then configured the network services using network manager as it did not work by just putting the DNS servers and router address. The internet was working fine till I installed Oracle 10g. It somehow modified my DNS address from 203.97.33.1 to 203.97.33.14. The web interface for Oracle works fine.
If I run the Network manager again, my internet starts working but the Oracle web interface does not work.
I do not understand what's happening. Please help.
Thanks.

I have never liked using Network Manager with Oracle. If you use traditional ifup, you can use SCPM and have different profiles. The first 2 things I do during an install of Suse Linux that will have Oracle 10g is disable Network Manager and disable IPv6. Go to /etc/hosts and remove all entries that have the IPv6 addresses. The 10g OC4J applications from database and application servers have problems with IPv6 addressing. Make note of your current DNS addresses and your route before reconfiguring to ifup. Use route -n to get the router address if you do not already know it. It is the gateway with values. It is also a good idea to configure your wired ethernet device to start on boot up, then you can ping your hostname whether or not your cable becomes disconnected, i.e. still access dbconsole with the router down.

Windows 8.1 - Upgrade from 8, Start Button Does Not Work

I cannot find a fix for my 8.1 start button.
It works when I move the task bar to the top, right or left but not at the bottom. I ran all windows updates and there are no missing/unknown drivers in device manager. No errors in the event log. I've restarted multiple times and created a new local profile.
I've also tried:
Copy WinX folder under C:\Users\Default\AppData\Local\Microsoft\Windows into C:\Users\[your user name]\AppData\Local\Microsoft\Windows.
dism /online /cleanup-image /restorehealth
Any ideas? I would prefer not to do a clean install. Thanks in advance.
HP Touchsmart 23 series
i5-3475S 2.90GHz
16GB RAM
1TB HDD

Could you please describe a little more detailed about “Start Button does not work”? What is the symptom?
Yes, when the taskbar is at the bottom of the screen, I cannot left click on the start button. The machine is also a touch-screen, which does work when I touch the start button. If I move the task bar to the left, right or top; the start button does work.
And what is the kind of the account, Domain? Local? Or both?
This is local machine.
It still doesn’t work in a new account?
Same issue happens with a new account.
What happens if you use win + "X"?
Win + "X" works fine; displays options.
Regarding to the “doesn’t work, both for screen touch and mouse?
Left-click via the mouse does not work. Touch works fine.
Can you try to copy the WinX folder from a working PC to your PC for a test?
I do not have another Windows 8.1 machine available to me.

I was billed for a renewal with eHarmony that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed. How do I get my money back or get my subscription working??

I was billed for a renewal with eHarmony via iTunes that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed it is on my bank statement. How do I get my money back or get my subscription working?? I have all transaction ID's and invoice numbers. Please help this has been very frustrating, thanks.

Yes, I reported the problem using that exact sequence immediately after discovering the problem with the app. When I submitted my complaint and request, Apple redirected me the website of the app manufacturer where I submitted the same complaint/request for refund. I have not heard back from either, and was still charged, so I can only assume that is not the correct way to "Report a Problem" even though Apple would have you believe otherwise.

Rtmfp p2p does not work on ios, who is responsible?

Hello,
i'm having some troubles with p2p rtmfp connections from and to an air packaged ipa file via adt.
First, iam not able to open 2 concurrent NetConnections.
So this Example by Michael Thornburgh on http://forums.adobe.com/thread/857560?tstart=0 will just not work on my IPad (air file packaged with adt), but it does in the Air Player on my Laptop!
Second, Broadcasting via rtmfp from an IPad (air file packaged with adt) and Receiving the Signal on eg. a Laptop and Air file will not work either.
Who can give me qualified info on whom to ask for cirrus, rtmfp and ios related questions?

Hi Michael,
youre absolutely right in the two things you mentioned.
1.) For the sake of simplicity i stripped out all NetConnection status handlers, to see if the net connection worked or not or what else happened.
But if i write the trace output in a textfield on ios i see that everthing works fine on the first place, and my super lame check if both connections are ready works there, both are connected successfully.
2.) onPeerConnect return value:
"onPeerConnect() function doesn't return a value" => that is right, but it does not make a difference on ios even if they return true;
the corrected script on: http://codetidy.com/794 reflects that, but it does not work.
What i meant with two concurrent NetConnections not working meant was, that it is just not working when using rtmfp.
It worked on the ipad when i used the traditional rtmp client / server streaming via red5 though.
the rtmfp on ipad fails, when ipad is the sender and another device or itself is the receiver. then after a call to:
initRecvStream();
and therefore the _recvStream.play( "stream" ); method, i dont get a netStatusHandlerReceiver event back on the receiver side, nor does a onPeerConnect method on the sender does get triggered.
But one thing stays quite strange:
if i setup my ipad packaged air file as a receiver and receive a stream from another air file on my laptop via cirrus it works.
if i setup my ipad packaged air file as a sender and send the stream to another air file on my laptop via cirrus it does not work.
so there seems to be a bug in the ios packager and rtmfp part.

Icloud log in with Apple id does not work from my mac when i try to run on photo stream

When I try to active photostream or sharing via icloud it does not work I get an errormessage that there is communication problems with icloud. I cant get around to administrate the stream from the Icloud site or via my imac directly. It has never worked!

yes, the apple id works for everyting else, but not for icloud. on my phone and ipad it is set up with the correct apple id and password. however, when i try to log on to icloud under system by clicking the icon the erromessag that i get is unknown apple id or password.

Capturing video via Firewire does not work on CS6

I recently installed 64 bits Windows 7.
The capture function in Premiere CS6 does not work with my panasonic camcorder NV-GS500
Windows recognizes the camcorder, but I cannot do anything with it in the Capture window.
This not an Premiere-specific problem , because also wit Nero I have the same problem.
I expect that the Windows7 driver for my camera needs to be upodated, but Panasonic cannot help me.
Is there anybody out in the Premiere community who knows a solution?

Windows 7 Changed the standard 1394 driver from XP which allows Win 7 to Throttle bandwidth on Firewire devices. This is why Ann mentioned the legacy driver which is basically the old XP driver. The bandwidth throttling causes allot of issues with certain cameras during the Handshake process which is why you often have deck control but no preview or primary video stream. If you follow the instructions in the link above or the paste below to set the Legacy driver for the 1394 controller , that will often resolve these issues. However some firmware on different manufacturers Firewire controllers include these C-State Bandwidth throttling sets so it still may not work. In that case you want to get a Firewire card with a TI chipset. The firmware on TI chips are clean and dont include the C-State changes.
Solution 6: Use the Legacy FireWire driver (Windows 7 x64)
Click the Windows Start button; type "device manager" into the Search box and select Device Manager
Swivel open the "IEEE 1394 Bus host controllers" item
Right-click on your listed 1394 controller; select "Update Driver Software"
Click the "Browse my computer for driver software" button, followed by the "Let me pick from a list" button
Select the option that has "(Legacy)" at the end of the name; click Next and let Windows install the driver
Make sure you restart the system after you make the change to legacy. Also do not have the Firewire device plugged in when changing the driver to Legacy.
Close out of dialogs and retry capture'
Eric
ADK

Message interface does not exist in any software components installed on th

Message interface does not exist in any software components installed on this business system.
hello,
When I check the interfaces on the business systems of 1 technical system, none of them have sender or receiver interfaces, hance I can't use them. The interfaces should ofcourse be on the Directory.
I have deleted the business systems and the technical system and created them again, but no result.
The product and software componets are in the technical sytem and business systems.
Any help would be usefull.
thanks,
Job

Hello!
If someone will search in the future for this error, here is the solution:
The error occurs if the GUID of the software component at the SLD is different to the one at the repository. Please compare the GUID at the SLD -> Administration -> Content Maintenance -> Dropdown "Component Version" -> Dropdown "Software Component Version". At the Integration Repository you select the Software Component Version at at the tab "Keys" you find the related GUID.
The error occured because the Software component has been created manually at the system. The repository content came from another system via import with own SLD (and because of that with another GUID for the software component).
Kind regards,
Klaus

User Interface does not load SRP527W

Hi,
Apologises if this question has been asked before.
We have a SRP527W router, and for some odd reason the web interface does not load.
The device has been reset to factory defaults countless number of times and sometimes I can get in but than once you save something you cant get back in.
I have completed the following steps
1. Tested via multiple browsers, (Firefox, Chrome & IE)
2. Reset router to factory defaults
3. Router can be pinged on 192.168.15.1
4. Installed Firefox extention to test with previous IE versions
5. When I managed to get into the router, I ran a restore with a backup config that worked
6. Telnet function is blocked but dont have the ssh details. (tried: admin admin, admin password, cisco cisco, cisco password)
7. add http://192.168.15.1 to the safe list
The odd thing is sometimes the web interface loads and sometimes i just get a blank page.
Any suggestions?

You are welcome
Now that you are able to login, either move or delete enough files to get at least 10 GB free, 15 would be better.
A tool to help with that is OmniDiskSweeper.
Allan

DV(PAL) Capture via IEEE1394-Interface does not work

Similar Messages

Maybe you are looking for