"DV Start/Stop" is 1 frame off!

how come when I capture down conv dv anamorphic from my xha1 and do the "dv start/stop"....the first frame of all of the markers is from the previous clip?
system info: FCP 5.1.4
Canon XHA1
OS 10.4.10
Thanks!

I don't do HDV but maybe since
the MPEG TS consists of one whole frame every 15 GOP and since the whole frame (I frame) determines the frame lenght and content, when you capture the camera automatically resets its own in and out points!
This is just a thought!
gig

Similar Messages

Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time.

How do I eliminate this glitch? Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time. I tried double-clicking the Home button which brings up all of the active apps, touched and held the Music icon until all the icons started wiggling, tapped the Close icon in the upper left corner of the Music app to close the app completely, but the app is still open and still randomly stuttering. I did notice that the play button icon flashes in the upper right corner of the screen when this happens and it appears and disappears in concurrence with the Music app stuttering. When the music starts, the icon appears and when it stops, the icon disappears again. When the music stutters on and off, the icon appears and disappears rapidly and in sync with that random glitch. This just started today for no apparent reason. I turned the iPad off, waited 30 seconds and turned it back on. As soon as it was finished starting up, the same music glitch began again immediately. I'm using iOS 6.1.3.

Well, no one seems to have any answers or ideas for me, I'll update what I've been able to accomplish.
I reloaded all 14 disks in the time frame of watching Lord of the Rings on Fri. nite.
Funny thing is, the first disk pulled the info from the online store! Hooray!
Wait-then all the next 13 could find no information online...what the heck is up with that? So I MANUALLY assign each disk a new track # to co-inside with each disk, spent about 2 hours doing that.
But still, itunes tells me my playlist is too large, there's not enough space on the ipod. so I unchecked 1 1/2 disks (I'd listen to 1/2 of disk 1 previously) and voila! there's my ipod full of my book. Finally. But what a lot of bother just to keep things in order!

TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

Turning off DV start/stop when capturing HDV

I am trying to figure out how to capture from my camera that shoots HDV. when I capture, FCP divides every cut into a new clip. I would like to turn this off. I unchecked the box that says "make new clip at start/stop" but I still get the divided clips. I heard there is a way to turn this with the new version. I am capturing HDV 720p
Thanks,
Johnny

There is no fix. That is the nature of HDV. Every time the camera is started and stopped, the camera creates a new clip. That is because HDv records in a long GOP (group of pictures) structure, and when you stop the camera, the structure is broken...FCP detects this and creates a new clip.
But so to other NLEs...
Shane

Itunes 10.4.1 end of songs cut-off: not crossfade or start/stop settings

the end of many songs is skipped during playback with itunes 10.4.1
its usually after about 3:40 minutes.
it is not the crossfade or the start/stop settings of the tracks in the 'info' section.
this has just STARTED happening. Anybody else getting this? Is it some recent update bug?
any advice?

ITunes started opening automatically about every 30 seconds on my P.C. - I realised that the last thing I did when I connected my iPad to my PC (last time using my USB cable connection) was to put a "X" in the box that said "Sync using wifi". I re-connceted my iPad by the cable and I unchecked this box, iTunes stopped opening automatically every 30 seconds.
My PC was obviously looking for my iPad by wifi every 30 seconds,

1 Frame off

Working in FCP 6, and notice that when I move my cursor and set an out point on my timeline, it is always 1 frame off/over the point of where my cursor is, so it's always gives me 1 additional frame. very annoying.
Any help would be much appreciated.
Thanks,
Chopper

if you park the playhead on a frame and hit in and out you have a 1 frame duration
Exactly. Not sure how that is not what I said. You don't have to move the played to get 1 frame cause the In-Point is the Start of the Frame and the Out-Point is the Start of the last frame (in this case the current frame).
If you want a 10 min clip, things could look like this (as you already know)
(PAL)
In: 10:00:00:00
Out 10:09:59:24
Duration: 10 mins
(PAL)
In: 10:00:00:00
Out 10:10:00:00
Duration: 10 mins 1 frame
I guess I should have said the playhead displays the start of the last frame but the actual Out is the end of that Frame, right?
I'll stop cause everyone gets it now so there is no real point in this

Ram Preview - Stopping after 40 frames

Hi All,
I've recently moved to After effects CC on my home computer, and for some reason whenever I try and RAM preview it stops after 40 frames or so...
The animation is REALLY basic (full screen shape layers turning on and off to the music) and an mp3 file playing in the background.
My computer spec is:
21.5-inch iMac Mid 2011
OSX 10.8.5
2.8 Ghz Intel Core i7
16 GB 1333 MHz DDR3
AMD Radeon HD 6770M 512 MB
I have the following multiprocessing prefs:
I would greatly appreciate any help on the matter... the project seems far too basic for it to be having genuine issues with playback...
Dan

Hi Rick,
Thanks for the reply.
I've changed the .mp3 file to a .wav file and that seemed to fix everything, for the time being...
It previewed for 10 seconds fine, but after about 15mins of working on this the RAM preview area has started to shrink again and it's only previewing just over half (5 seconds).
I changed my memory and allocated 4GB to other apps, also turning off rendering multiple frames... (by the way for some reason I can't get my 'actual cpu's that will be used' to change from 0? This seemed odd). Still no change.
I've attached a screenshot of my comp details below, along with a shot of my screen when RAM previewing... (you can see the green bar does not go all the way). I'm not working with ANY footage which is why this is most peculiar, just the wav file so I can edit to the beat.
Once again if there is anything else you can think of...

How to add table attributes to start stop html table item

Hello,
I want to put a frame around a number of items between a start/stop html table item. How can I do that?
Can I add border= "1" somewhere?
Thanks for the help

Hello,
You would do something like this
<style>
.formlayout{border:1px solid red}
</style>
But how can I put it on and off then? You could use some javascript to do it or use the region id and then get the second table in the region body with that class name, there are a couple different ways to do it but none are simple and out of the box.
If you can out an example page on apex.oracle.com it will be much easier to help you out with the exact code.
It will be much simpler to do in 3.1 which is why that enhancment was put in.
Regards,
Carl
blog : http://carlback.blogspot.com/
apex examples : http://apex.oracle.com/pls/otn/f?p=11933:5

Print to Video Start Stop recording

Hello
Ok is their any way to have FCP mark a Start Stop after each clip when recording a timeline with many clips. So that when recaptured it imports each clip in the Timeline as an individual clip.
Perhaps their is another software for this.
I have been reading the Manual back and fourth cant find out how to add start stop points. I have tried markers transitions blank space. Nothing wants to work.

Thank you for your help.
Your suggestion got me to come up with a few other things which led me to what I am going to do.
I still am going to try the Adobe thing I'll let you know how that goes.
I will have a directory with markers one for each tape on a USB stick.
A black slug around 2 frames in between each clip and enough black to start off and to end with as to keep every frame.
One thing though.
The reason I was trying to do start and stop was in the event someone else needed to record the Tape but I will probable be the only one to do such.

AE CS6 Renders Stop after 325 frames.

AE CS6 Renders Stop after 325 frames - or nearly: they abruptly start slowing down to 1 frame every 30 seconds until they hit a standstill, as the amount of RAM in use starts climbing suddenly until it reaches around 67%, at which point it is dead.
I'm on AE CS6 Version 11.0, freshly downloaded from the Cloud.
I am on a MacBook Pro 5,3 running Mac OSX Lion 10.7.5 with a 3.06 GHz IntelCore 2 Duo processor and an NVidia GeForce 9400M 256MB Card.
I've maxed out the RAM at 8 GB. I'm using Quicktime Player 7.6.6 (the most up to date).
I'm just rendering a 2D Comp to Quicktime/Photo JPEG Codec with an aspect ratio of 960x540. The comp is simple: a 1.6 MB jpg with a slight scale-up and a Liquify effect for a duration of about 4 minutes 30 (interestingly, the render stop occurs about 15 seconds before the Liquify effect starts.)
I've tried this with "Render Multiple Frames Simultaneously" on and off with no difference. However, when it's on, Installed CPUs reads 2 and Reserved for other apps reads 0 and AE will not let me change it. Also, Ram Allocation per Background CPU has been tried at everything from 1 GB to 3 GB. Actual CPUs used is set to 0, and I cannot change it either.
I have no other apps open during rendering. And there can't be a bus issue, since the AE project, the source jpg and the output location are all in the Documents folder on my hard drive. I'm at a loss. Any ideas or suggestions?
Thanks

This had an interesting result: the percentage of RAM in use no longer goes through the roof but tops out at 13%. The render does not stop but goes painfully slowly. At 24 hours of render time, I've now gotten to frame 1470 of 8114. Estimated time to completion now reads 109 hours.
As I mentioned before: I'm just rendering a 2D Comp to Quicktime/Photo JPEG Codec with an aspect ratio of 960x540. The comp is simple: a 1.6 MB jpg with a slight scale-up and a Liquify effect for a duration of about 4 minutes 30.
Or does liquify just take this much processing power?

Can not start/stop fullfilment server after fresh install

Can not start/stop fullfilment server after fresh install
Product: e-business suite (11.5.9)
Platform: Win XP 5.1 (SP2)
We have performed a new installation of ebusiness suite in our windows platform.
Installtion went with out any problem.
But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
script returned:
C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
You are running jtffmctl.cmd
Mon 13/09/2004
01:46 PM
"Starting Fulfillment Server for "PROD" on port "9300" ...\n"
"Error returned while running OUI"
ERRORCODE = 1 ERRORCODE_END
.end std out.
Class not found: oracle.apps.jtf.fm.engine.processor.Processor
Please let us know how to fix this issue.
Regards, Kunal

edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

While in email today, the computer began flashing. I had to turn off with button. When I turned it back on, I got the apple icon and the moving loading wheel. It would turn for about 60 seconds and then stop. I turned off again. I now have a black screen.

while in email today, the computer began flashing. I had to turn off with button. When I turned it back on, I got the apple icon and the moving loading wheel. It would turn for about 60 seconds and then stop. I turned off again. I now have a black screen.

Hi wiesenruth,
If you are having issues starting up or booting your computer, you may find the following articles helpful:
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Regards,
- Brenden

Using Overwrite, snapped PC files from Vegas are 1 frame off in timeline!

Perhaps someone here can offer some help...
I was given a 30 minute piece of video that someone else created and started in Sony Vegas on PC. I have to finish the project in FCP. I personally did the final Audio soundtrack myself in Pro Tools. I am syncing that with this video, that had a "rough" early version of the same audio.
The person who gave me the files delivered them in AVI format. As many editing programs do, Vegas apparently split the 30 minutes of video/audio (around 6 gig of DV-NTSC 29.97 video) into multiple 1 gig pieces. So I have 6 (1gig) .avi clips that should snap back together frame accurate to get the 30 minutes back in the timeline in FCP.
So, I setup a standard DV-NTSC FCP project and I imported my audio first, so I could verify time cues, etc.
I import the AVI files, then Snap them in the timeline front to previous end, carefully, using Overwrite.
However, all of the video files are exactly 1 frame off at the end of each clip. As if either the Vegas splitting chopped off a frame at the end while splitting, or FCP is losing a frame as I import and then snap it in the time line. I can determine that it is exactly 1 frame, because of my "final", non-split audio track that is sync'd just underneath it. At the timeline area where each new clip gets snapped in, I can zoom way in and determine that the rough audio from the video track, is off by a frame with my final audio track.
It's not a drift problem, because if I line up each single clip on it's own with my audio, it stays perfectly in sync until the final frame. Then it's 1 frame short.
So by the time I snap in 6 clips, my video is exactly 6 frames off at the ending with my audio track (which I know is correct).
Sorry for being a bit lengthy, but it is hard to explain otherwise...
Is there something I am overlooking? Shouldn't FCP handle the AVI files okay? The person who gave the files to me from Vegas states that they should be frame accurate regardless of the split.
I am going to try them in another program to see what I discover, but I am stumped right now in Final Cut Pro? (That is assuming the Vegas splits were correct? Maybe that is the culprit?)
Thanks for any thoughts!
Wade

Thanks David...
I was able to finally conducted a test. I went to a friends studio that runs Premiere Pro 2.0. I checked the files there and the split AVI files do line up frame accurate perfectly and there were no frames cut off. (No surprise as it's PC files used in a PC format
Also, I first mentioned that I thought it was the end of the file that was missing a frame. It actually looks to be the opposite. It's at the front of the file that is off and missing 1 frame.
So, shouldn't I be able to use the AVI files in FCP frame accurate? Is there some dummy setting I am missing? Lastly, since AVI files are not the best format to use in FCP, can anyone recommend a conversion method for me to use for these files in FCP?
Thanks again!
Wade

Start/stop/restart live stream - do stream files need to be removed first?

When streaming a live event if something happens and we need to stop our encoder and then restart it again.
Do we need to delete the stream files created in the 'application/event/' directory and also delete the f4f stream,bootstrap, etc... files too?
If we don't delete the stream files before restarting the live stream. It will only play about 10 seconds of the stream then just hang buffering.
What is causing this?
My application log shows no access when I restarted the stream.
2013-09-04
09:02:21
3960
(s)2641173
onPublish : cfhsstream4
2013-09-04
09:02:21
3960
(s)2641173
Stream name is: cfhsstream4 and live event is: cfhs
2013-09-04
09:02:21
3960
(i)2611173
Event level recording configuration: General[flags: 3, keyframe interval: 60000, max size: -1, max length: -1, io buffer size: 0], Fragment[frag duration: 4000, seg duration: 0, duration precision: 0, allowed drift: 1000, frame rate: 0.000000, frames per interval: 0, intervals per frag: 1, frame precision: 1, disk management duration: 0.000000], ContentProtection[enabled=false(overridable)]
2013-09-04
09:02:21
3960
(s)2641173
f4f:cfhsstream4 - NetStream.Publish.Start
2013-09-04
09:02:21
3960
(s)2641173
f4f:cfhsstream4 - NetStream.Play.Reset
2013-09-04
09:02:21
3960
(s)2641173
f4f:cfhsstream4 - NetStream.Data.Start
2013-09-04
09:02:22
3960
(s)2641173
f4f:cfhsstream4 - NetStream.Record.Start
2013-09-04
09:02:23
3960
(s)2641173
f4f:cfhsstream4 - NetStream.Record.NoAccess
2013-09-04
09:02:23
3960
(s)2641173
f4f:cfhsstream4 - NetStream.Record.Stop
2013-09-04
09:02:23
3960
(s)2641173
f4f:cfhsstream4 - NetStream.Record.NoAccess
Thanks,
Dave

I have a similar issue like Mr Dave explained. If need to stop, start, stop and restart again, the encoder is sending, but in player not shows nothing. Then we need to stop and disconnect in encoder, and remove the stream file in /event and the cache files in livestream folder for after then restart the streaming. Only after this action, the streaming works fine and the streaming shows again in player.
Have other way to solve this issue without need all that actions? Note that I use the Adobe FME to live streaming and encoding in HDS http streaming
I hope for a help
Thanks
Pedro
Message was edited by: asaweb2013

I can browse the web but when I go to play video or you tube it will start stop over and over almost like it is buffering could this be the router all other non iPad devices work

I can browse the web but when I go to play video or you tube it will start stop over and over almost like it is buffering could this be the router all other non iPad devices work

How are you trying to play them, in the iTunes store or the Music and Videos apps ? Downloaded and synced music and videos should be in the Music and Videos apps, and you can stop content that is only in the cloud from showing in them via Settings > iTunes & App Store > Music and Videos 'off' (under the 'show all' heading).
If you don't have your music and films/TV shows in those two apps then you should be able to download them into those apps via the Purchased tab in the iTunes store app.

"DV Start/Stop" is 1 frame off!

Similar Messages

Maybe you are looking for