DV Video Encoder -- Type 2 and AVI OpenDML Uncompressed

Dear all,
I've been converting a number of edited 1280 x 720 videos to DV PAL Standard with Adobe Premiere Elements 9. However, when I was importing the output file to another DVD editor, some of the files have been rejected due to the follwing reasons hightlighted in red. Do you know how o fix it?
100 - DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
101 - AVI OpenDML Uncompressed, 24bits 720 x 576    , PCM 48kHz 16bit Stereo
102 - AVI OpenDML Uncompressed, 24bits 720 x 576    , PCM 48kHz 16bit Stereo
104 - AVI OpenDML Uncompressed, 24bits 720 x 576    , PCM 48kHz 16bit Stereo
105 - AVI OpenDML Uncompressed, 24bits 720 x 576    , PCM 48kHz 16bit Stereo
106 - DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
100P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
101P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
102P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
104P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
105P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
106P- DV Video Encoder--type 2, 24bits 720 x 576 4:3, PCM 48kHz 16bit Stereo
Thanks in advance.
Best regards,
Anson

Unfortunately although you can apply all kinds of styles in the Forum editor, it throws most of them away when you post. So, as you will have seen, you cannot display in colour. If I recall correctly the only universal accepted features are normal, bold and italic. Depending on your browser smileys' may or may not work.
What other editor gave you the errors?
Are all those lines you've posted error messages?
Can you load the offending clips into GSpot v2.60 and post the screenshots here.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

Help me export DV VIDEO Encoder Type 2 with cs6

Dear !
I use AP CS6 edit my film. When i export my video 1minutes and 10 minutes then :
-export 1minutes
-Export 10minutes
Media Encoder CS6
After endoder done i use Ulead Videostudio 9 check file info
i see it different.
i want export my video have duration over 10minutes with compression DV Video Encoder-Type 2
Please help me.
Thank !

I do believe PP will export to different types depending on the length of the export. I'm not aware of any way to change that type in PP itself. But there are third party tools which can do the job.

About file audio/video file type and name of jpeg ...

Can anybody please tell Following few things
1- If I record a telephone call (conversation) in Nokia N70, what is the file format i.e. wav, mp3, rm or what and what is the initial name of the file e.g. nokia70-001.wav, nokia70-002.wav etc or what?
2- If I use Nokia N70 as voice recorder then in what file format Nokia N70 saves the file i.e. wav, act, mid or what and what is the initial name of the file e.g. nokia70-001.wav, nokia70-002.wav etc or what?
3- In which format Nokia N70 saves the video i.e. 3gp, mp4, avi or what which it captures and what is the initial file name of that video e.g. something like nk70-001.3gp, nk70-002.3gp etc or what.
4- What initial file name of the JPEG photos taken from Nokia N70 like nk70-001.jpg, nk70-002.jpg etc or what.
I'll be very thankful for the reply

hi there
1. I think u cannot record a call converstion from N70 out of the box
2.ur voice records are stored as sound clip.amr
3.video quality depends upon the settings if u set it to high it stores it in mp4 format with the file name as ur phone's date ex 20072009.mp4(today's date)
4.same is applicable for images too ex:20072009.jpeg if u have selected as Default image name as "date" in the camera settings, if u select it as text it will ask for the desired name u want to select
cheers..........
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Compatibily problems between flash media live encoder 3 and fms version 2 ?

hello
i am trying to setup a stream for a live event we plan
for this we want to use our "flash media server v. 2.04" and
to encode the video the
"flash media live encoder 3"
but im really shocked about the poor quality - actually its
not working
the video is freezing for a while an then playing back very
fast and then freezing again
and the audio is stuttering
i tried propably all kinds of combinations of the settings
without any success
very often the encoding session is being stopped and started
again with the following
error message:
Fri Mar 13 2009 05:02:22 : Audio Encoding Started
Fri Mar 13 2009 05:02:22 : Video Encoding Started
Fri Mar 13 2009 05:03:09 : Unexpected error encountered in
encoding process.
Fri Mar 13 2009 05:03:10 : Audio Encoding Stopped
Fri Mar 13 2009 05:03:10 : Video Encoding Stopped
Fri Mar 13 2009 05:03:10 : Session Stopped
Fri Mar 13 2009 05:03:10 : Session Started
Fri Mar 13 2009 05:03:10 : Audio Encoding Started
Fri Mar 13 2009 05:03:11 : Video Encoding Started
and the media server says:
Sending error message: Method not found (FCUnpublish).
Sending error message: Method not found (releaseStream).
sometimes it restarts only the audio encoding
the machine for the streamingserver (windows version) is
realy strong an has a very fast
internet connection
the encoding machine is a 2.2ghz macbook pro with windows xp
and 6000 dsl connection
with the low bandwidth factory setting of the flash media
live encoder the cpu usage is
about 16%
for the videoinput i want use a canopus ADVC-110 firewire
capturedevice
but i also tried the apple isight usb 2.0 laptop-camera and a
logitech quickcam express
usb 1.0 webcam
all with negative results
two colleques encountered the same problems on their machines
but when i upstream the video with an standart flash client
the videostream runs stable
without any problems
so i guess the problem is the flash media live encoder
is there a compatibily problem between the server version and
the encoder version ?
thanks in advance for any hints

Hi,
FMS 2.04 version doesn't support H.264 and AAC/HEAAC. So, you
can only use Vp6, Mp3 and Nellymoser codecs in FMLE for streaming
to this server.
You are getting "Unexpected error" message within 50 sec of
your encoding session. This error occurs when either of the video
or audio device doesn't function properly. As you have mentioned
that various video devices gave negative results, try to use a
different audio device or uncheck the 'audio' device option and
encode only video.
Exactly what was the nature of the negative results for
different video devices? Was it the same "unexpected error"
problem? Please share the steps, device and encoder settings also.
When you observe video freezing and audio stuttering problem
while playback, reload the flash player and let me know if you
still see the same problem.

Flash 8 Video Encoder problems

I used Video Encoder to convert a .mpg file. When I imported
it into Flash the audio plays but no picture. I then used IMtoo
MPEG 3 encoder to convert it to an MPEG file. This time I got
picture and audio but the picture and audio were very choppy.
Does anyone have a clue why? Or perhaps suggest another app
that will convert the file to another format that I would have
better success converting to .flv without degradation?
THANKS!

quote:
Originally posted by:
lynnirwin2000
thanks!
I uploaded the MPG file and I also uploaded a directory with
the flash files (and a sample FLV file that works). I also tried
converting some other video clips that I have and they all worked
-- so I don't think it is the Flash player.
However, when I received the .MGP file (that I uploaded to
you) from a vendor (who videos for a speaker's bureau) and
converted it to a FLV file using Video Encoder 8. and then renamed
it to motif_200kbps.flv in order to have it play in the video
player template that I uploaded to you.... I got sound, but no
video. Regarding posting the video file that I uploaded to you, I
am unsure of the consequences of that ... so perhaps I will email
the file to Jeckyl.
Now I am really confused, because the file
"motif_200kbps.flv" works fine for me - video and sound are there.
Are you using Flash Player 8 or 9 to view the final SWF? If you are
using Flash player 7 then there is your problem.

Flash Video Encoder wont start up

I had this problem with my FVE 8 too. I have uninstalled
Flash video encoder 8 and deleted all prefs. Now, I am simply not
able to open CS3 Flash video encoder. Never been able to open it.
Tried everything to no avail. Has anyone else had this issue? I'm
on a Mac, have checked the crash reports but am unable to see
clearly what is causing the crash. Any help there would also be
great. Thanks.

Trying updating all video codecs including quicklime player.
You should not have had to remove old flv encoder because they are
located in different places. CS3 is located in adobe folder where
as older versions are in macromedia folder.

CS4: DVD encoding problem(s) Mpeg2 and avi

Hi,
I have been trying to burn my video files to DVD. After a month of failures and 50+ wasted DVDs thrown in the garbage -- plus countless hours trying to learn the basics, reading the FAQs, trouble-shooting, and losing my patience awaiting technical replies from Adobe (which I now suspect will go unanswered) -- I am out of solutions and waving a white flag.
Problem:
I have two video files. Both were created in Premiere Pro CS4 and exported via the Adobe Media Encoder as MPEG2-DVD high quality files (for NTSC) .
The first Mpeg2 file is 800 MB (41 mins); the other is 988 MB (50 mins).
I have placed the two files into a single timeline, with 21 chapter stops.
The only other file in the entire project is a PSD file for the Menu. It has two buttons, which link respectively to chapter stops 1 and 10.
My results are failure-upon-failure...
Primary question:
When I go to "Build" the DVD, it says the Encoded Size is 4.7 GB ~ same size as the DVD. This displays in the "Disc Info".
Similarly, when I open my "Timeline" properties for that single timeline, it says the duration is 1 hour 31 minutes - 4.7 GB.
Why is the disc a full 4.7 GB when the two video files (combined) are under 2 GB?
Supplementary questions:
My "Flowchart" and "Property" links display the Menu, with the two button links in my Menu PSD connecting to the respective chapter stops.
There are no problems when I click "Check Project," and the project works perfectly in "Preview" mode.
But, when I attempt to test the burned DVD into different DVD players, the Menu doesn't appear and the play defaults to random chapters, then freezes. I can access the menu, but only after the play has started and/or frozen, and I have to do that by clicking the "Menu" button on my DVD remotes. And again, when I hit play on either of the buttons on the main menu, the video files will freeze, which means burning & testing each disc sometimes takes an hour per.
Does anybody have a solution?
I have read and watched several tutorials, to no avail. I have tried burning the Project using large Mpeg files as well as medium Mpeg files, both encoded with 1-Pass VBR, 2-pass VBR, CBR. I have tried widescreen and normal.
I have also tried using AVI files. The two AVI files are respectively 41 mins @ 1536 kbps 720x480 8.68GB; and 50 mins @ 1536 kbps 720x480 10.6GB.
Together, those two AVI files are 19+ GB, which would require 5 DVDs.
What am I doing wrong? What should I be using to burn DVDs - Mpeg-2 or Avis?
When I export from Premiere Pro/Adobe Media Encoder, whould I be exporting as Mpeg2 files or Mpeg2-DVD?
Is it possible that Encore automatically expand and/or compress files, so that the 19GB avi is compressed to 4.7 GB DVD; and the 1.8 GB Mpeg2 "expands" to 4.7 GB?
Any help would be greatly appreciated, as this project has caused me numerous delays and ruined deadlines and soured me even more on Adobe's video editing product and their truly-awful customer support.
Thank you

As far as the use of premiere pro CS4 with Encore Cs4, do not bother to pre transcode your material. Let Encore do this for you. Leave your files in the original format which I assume was AVI. Instead import your Premiere Pro sequence directly from the project (or export it from Premiere Pro it to encore). As you quessed Encore will try and expand/compress your files for the DVD you are making.
Encore by default trys to transcode for the best quality that will fit onto the media you specify which is why it is setting the output to 4.7 rather than the file size of the video.
You were not specific enough about the nature of the failed copies. One thing to do is to always try testing your project from your first menu to see that it behaves correctly. If you don't want your DVD to start playing automatically make sure you set it to open the Top Menu. Then try a test either to your hard drive (if you can), or to a RW DVD.
Message was edited by: tnsprin

.mp4 and .avi video thumbnails in finder view

Hi, Some of my .mp4 and .avi video files have a thumbnail in finder view and some don't... Does anyone know how I can solve this?

function(){return A.apply(null,[this].concat($A(arguments)))}
the_wine_snob wrote:
Maybe, but maybe not. I use DigitalMedia Converter to convert to DV-AVI Type II's (I'm only doing SD), and it has a Split function. However, I have never used that, so do not know how well it might work for your needs, if at all. I just do not know. I believe that Deskshare has a user forum, and that might be a good place to try, after you've looked down their FAQ's.
I hope that others will have a definitive answer for you, with iron-clad suggestions.
Good luck,
Hunt
i don't know.

CS3 Video Encoder w/ .m2v and .wav files

Hello - I use the CS3 video encoder to prepare Youtube videos. I usually input an avi file and it works great. However, I have a few videos which are seperate video (.m2v) and audio (wav) files. What is the easiest way or best program to use to enable me to convert these files for use w/the video encoder?
TIA

Premiere & After Effects can do that, if you don't have these tools, then you can also use some free tools: check www.videohelp.com for more information on this.

Versioning and Video Content type does not work.

Hello,
I have out of the box sharepoint installed.
When I apply versioning to a library. And try to see "Document set version history" (as I suggest Video content type actually inherits from Document Set). I don't see any version.
Can you tell me how can i see versions of the "Video" content type item in this Version History window?

Document set versions are slightly different than item versions. Document sets can be managed by a separate ribbon tab called Document Set and group called Manage.
Check below link for detail go through:
How to retrieve document set version history
Manage versions for Document Set
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer :)

How do I export wmv and avi files from media encoder on a mac in CC2014

How do I export wmv and avi files from media encoder on a mac in CC2014?

John T Smith wrote:
As far as I know, you don't... those are Windows formats that are not available on a Mac
Nonsense.
Apple Compressor has been doing wmf exports for a decade. I have the Quicktime export components from Telestream and they appear as presets in Compressor. They should be available in Media Encoder or they should be importable. Adove apparently refuses to see them. Still trying to figure that out.

How to get the identity claim encoding types of windows and forms authentication providers using API?

Hi,
We have to get all the claims providers associated with a web application and its identity claim encoding type using API.
For example:
If the identity claim of windows authentication is user name and the user name is a string, then we should get
"i:0#.w".
If the identity claim of forms authentication is
email and the provider name is "fba" , then we should get "i:0!.f|fba|".
The below link shows us to get all claims providers associated with a web application, but how do we get the identity claim encoding type of each provider?
http://msdn.microsoft.com/en-us/library/gg650432(v=office.14).aspx#SP_WCP_Tip3
using (SPSite theSite = new SPSite("http://someContosoUrl"))
// Get the web application.
    SPWebApplication wa = theSite.WebApplication;
    // Get the zone for the site.
    SPUrlZone theZone = theSite.Zone;
    // Get the settings that are associated with the zone.
    SPIisSettings theSettings = wa.GetIisSettingsWithFallback(theZone);
  // Get the list of authentication providers that are associated with the zone.
    foreach (SPAuthenticationProvider prov in
        theSettings.ClaimsAuthenticationProviders)
    {   // Need to get the identity claims encoding type using the SPAuthenticationProvider
Is windows authentication's identity claim encoding type always i.0#.w or the identity claim is always the user name?
Thanks & Regards,
Kalai.

If the requirement is to be able to convert claim identities to windows identities that can be used with other LOB/legacy application that still relies on NTLM/Windows Auth, then I would recommend to explore C2WTS.
Here are some references:
http://msdn.microsoft.com/en-us/library/office/ee539739(v=office.14).aspx
http://blah.winsmarts.com/2013-11-Use_C2WTS_to_get_a_classic_windows_identity_from_a_claims_identity.aspx
http://henrymcclain.blogspot.in/2013/05/claims-to-windows-token-service-c2wts.html
http://blogs.msdn.com/b/rodneyviana/archive/2011/02/20/claims-to-windows-token-service-c2wts-may-not-start-automatically-when-you-reboot-your-server-don-t-blame-sharepoint-for-that.aspx
http://blogs.msdn.com/b/russmax/archive/2010/05/27/understanding-sharepoint-2010-claims-authentication.aspx
Thanks!
These postings are provided "AS IS" with no warranties, and confers no rights.

Qmaster and Flash Video Encoder 8

Can I use Qmaster to set up a render farm to encode Quicktime movies to FLVs using Flash Video Encoder? If so, does anyone know where i can find the command lines samples to se up the Macs?

http://manuals.info.apple.com/en/AppleQmaster3_UserManual.pdf
Pages 18 and 29 should be helpful.
However, it might just be easier to encode to H.264.

What Video file type is required for upload to Captivate 8? I have uploaded an .mp4 video to my slide and the HTML5 tracker indicates that the slide/object is unsupported

Need help asap on this question - does this need to be an .FLV file? There seems to be a lot of conflicting information on this.

Hi
I am using a MAC
Captivate 8.0.1.242
Multi-slide synchronized so I can set the slide timing to accommodate length of video
The problem is specifically with .flv video files when publishing a responsive project or even trying to play the slide. The video encoder pops up trying to convert the file to .mp4 for output but does not work. My understanding is that the ONLY video file type I can use for responsive projects is .flv
Is this correct?
Caitlin Tomelden
Cloud Services University Program Manager
Intelisys
Supporting the Industry's Top Producers
707.238.8133 Direct
[email protected]<mailto:[email protected]>
www.intelisys.com<http://www.intelisys.com/>
Connect with us: <http://www.facebook.com/Intelisys> <http://twitter.com/#!/intelisyscorp> <http://www.linkedin.com/company/intelisys>

Flash video encoder and OS X

I have Adobe Flash CS3 Video Encoder on my Mac OS X and am trying to convert movies to .flv files. They encode OK, but on playback, the movies are consistently cut off in the middle. Seems other folks are having this problem and are getting no answers from Adobe. Some have said that Flash Video Encoder won't work correctly with Mac 0S X at all and that you have to encode videos using it on Windows. That seems ridiculous to me. Does anyone know anything about this or possible workarounds? Apparently, the issue also occurs with Flash 8's Video Encoder. I need to make flash videos!

.

DV Video Encoder -- Type 2 and AVI OpenDML Uncompressed

Similar Messages

Maybe you are looking for