DV2617US Manual and Part Number on wire are different

Here is the link for the manual entitled HP Pavilion dv2500 and dv2700 Notebook PC Maintenance and Service Guide
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&lc=en&dlc=en&document=&product=3557094
In the manual on P. 83 Item 5 from the "Remove the display assembly" section the wire is identified (2) as the Camera module cable.
The part itself has a label with the following information on it:
PA ARRAY MMC
23.42080.005
2007.11.13
SM REV: 5.0
That search shows it is the microphone cable.
I really don't want to take the display apart to see if the wire is attached to the camera or the microphone. The reason? I broke the connector trying to take it out and have to order a replacement. ( I have NO IDEA why it would not come loose...)
Which am I to believe? The label or the manual?
Thank you for your time!
< Steve >
This question was solved.
View Solution.

Sorry I am slow in responding. Could you simply answer the original question, please? No disrespect intended, but, why do I need to buy a set of cables to get the single cable connector that I need? If the cable is mislabeled, I will ignore the label. If the manual is incorrect, are there updates that I need to obtain? Or do I simply ignore the specifics of the manual? Your assistance will assist me in formulating a better foundation for other HP products that I repair. Thank you!!

Similar Messages

TS2972 used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10. Now with V11, cant find the button that compares two libraries and finds the songs that are different. Anyone know how to do th

Used to be able to pick out which songs in iTunes in my computer were not on a 2nd computer on homeshare in iTunes 10. Now with V11, cant find the button that compares two libraries and finds the songs that are different. Anyone know how to do this now?

Jneklason wrote:
~snip~
I know this email is confusing and really hard to understand...perhaps now you will know how i've been feeling--lost and confused with all the mis-information, with a hit and miss phone, and out of time with all the 1 1/2 hr to 2 hrs EACH wasted on this issue.
On top of all this, I can't even find out how to file a complaint with anyone higher up than Customer Service.
I hate to tell you this, but you didn't write an email. You wrote a discussion post on the Verizon Wireless Community forum which is a public peer to peer forum. Unfortunately since you didn't mark your post as a question, the VZW reps that roam this community won't ever see your post. Before you re-post it, don't. Duplicate posts get removed from the community.
I see there were several missteps both by the reps and yourself in your post. First you should have insisted on returning the phone within the 14 day return policy period. Second which Samsung Galaxy mini model did you purchase? The S3 mini or the S4 mini? Did you do any research prior to deciding on this device. The reps at that time deflected the easiest course of action, by trying to get you to replace the phone under insurance instead of returning the phone. The Early Edge payment option requires the current phone on the line using the early Edge must be returned to Verizon Wireless. Did you once considered going to a third party site like Swappa to purchase a gently used device for your daughter?

TTF and OTF versions of SourceSansPro are differently displayed in Swing (Nimbus L&F)

Can you confirm this?
I am using Java SE 7 U 25 on Windows 7 Pro 64bit
When I switch between the otf and the ttf version of the same font (Source Sand Pro by Adobe) then I see some differences (see the space above the "O")
But why? Is this a bug? My Java app uses the Swing L&F Nimbus
https://github.com/adobe/source-sans-pro/issues/32
java - TTF and OTF versions of SourceSansPro are differently displayed in Swing (Nimbus L&amp;F) - Stack Overflow

I know. But I have tried it also with another font - same problem
Take a look at https://github.com/adobe/source-sans-pro/issues/32#issuecomment-23402790
There is indeed a bug with the display of ttf/otf fonts in Java / Swing

I have a column in a Numbers document that currently only contains a number--the numbers are different in different columns. Before each number I want to add the words "Pack Qty." How would I do this?

I have a column in a Numbers document that currently contains a number and that number is different in different columns. I want to add the words "Pack Qty" before each number in the column. How do I do that? I'm using Numbers '09 on a brand new Macbook Pro. Thanks!

In an adjacent column add the formula:
="Pack Qty: "&<CELL>
where <CELL> is the cell in the same row where the quantity is,
Like:
E2="Pack Qty: "&D2
select, and hold, the little circle at the bottom right corner of the selction, then drag down

I updated my software and now my monitor fonts are different!

I updated my software from Apple (regular update) and now my Imac monitor fonts are different and squatted. Any suggestions?

Follow the instructions on the page below to remove the SC Info folder:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases

HT1420 If someone stole my laptop how can I lock it so they can't get in? I have my serial number and part number

My ex took my MacBook and signed me out of everything he is logged into it with his Apple ID. I have proof of purchase how can I lock him out of it completely with the serial number and everything on the receipt I have?

You cannot

Number of records are different in database table and select statement

Hi All,
i need to fetch data from table BSID for the customer 0010000145
if i am writing the code like -
    SELECT bukrs kunnr umskz shkzg dmbtr zfbdt zbd1t kkber
           FROM bsid
           INTO TABLE it_bsid
           FOR ALL ENTRIES IN it_kna1
           WHERE kunnr = it_kna1-kunnr
           and bukrs = pa_bukrs.
no. of records are 130 in the internal table it_bsid
and actual records are 200
but when i am hardcoding the customer no.
i am getting the exact records
   SELECT bukrs kunnr umskz shkzg dmbtr zfbdt zbd1t kkber
          FROM bsid
          INTO TABLE it_bsid
          FOR ALL ENTRIES IN it_kna1
          WHERE bukrs = pa_bukrs
            AND kunnr = '0010000145'.
records in internal table = records in the database = 200.
how it is possible.
why the first code is not giving the correct no. of records.
please reply asap.
thanks in advance,
madhu

Madhu,
You need to use the conversion routine...before u pass KUNNUR.
CONVERSION_EXIT_ALPHA_RANGE_I
CONVERSION_EXIT_ALPHA_RANGE_O
Hope this helps..
Chandra.

HT201272 I purchased an album and parts of some songs are not there. Tried redownloading and get error -1202. Any idea what this means and how to fix it?

I purchased an album and am missing parts of songs. Tried to re-download, but itune store is giving me error -1202. I also tried to transfer from iphone, but nothing changed. Any ideas on what else I can try?

Welcome to the Apple Community.
Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

HT1904 I purchased the iBook Wild, and parts of the book are missing

My purchase # is HHIJD7LO3S, My reciept # is 212035939359? Could you please fix this, or send me another copie. Thank you

Welcome to the Apple Community.
Try deleting the problematic book (electing to remove original file if/when prompted) and then re-downloading the file from the iBook store.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iBook app on your iOS device.
If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

RSA3 data in R/3 and PSA data in BI are different values for same Doc No.

Hello BI experts,
I have a weird situation in BI. RSA3 and PSA are not reconciled for same Doc no.
Data Source: 0FI_AR_4 (enhanced in user exit with some custom fields as well)
Extracting data using Infopakcage in BI as a Init load into PSA.
The values in RSA3 in R/3
Doc No           Amount
1400003125      714.29
The values in PSA in BI
Doc No           Amount
1400003125     581.56
Anyone come across this situation. Any help would be greatly appreciated.
Thanks much,
Anil

1. yes selections are same in RSA3 and in Infopackage
2. Yes pulling all data records in RSA3. Thats only record exits for that doc#
3. Its not a delta, we are pulling in RSA3 all records and Initial load to PSA.
Thanks much,
Anil

GL A/c Balances and GL Line Item balances are different

Hi All,
There is a GL balance difference in the TDS Payable accounts for the fiscal year 2008.
The FBL3N, GL line item balance and the GL Balances in FAGLB03(FS10N) is showing the different.
I believe that there should always be the same balances reflecting in both the Transactions.
Any one explain in this regard as to why and how these differences are existing.
Thanks and regards,
kumar

Dear Babu,
I checked in all types. I mean i selected open item , all items ( from n to date wise ) etc. But the balance is not matching because of only one accounting entry. If you don't mind could you give ur mail id, so that i can send the screen shots of that.
if you have any gmail id provide otherwise some other mail id.
Thanks
Regards
sai kumar

Depreciation GL A/C balance and table ANLC-NAFAG value are different

Dear All
I have faced a problem after charging depreciation I found that the balance of Depreciation General ledger account is higher than the value of Table ANLC-NAFAG
How can I find out the reason of this difference and what is the table link between BSEG/BKPF with ANLC/ANLP or any other asset table to find out this difference of depreciation charged, please advice
Regards
Sekhar

Hi Babu
Thanks for your early reply, I have tried for ABST2 but get "Current fiscal year 2010 in company code XXXX does not match the system date's fiscal year 2011."
their may be some posting for the FY 2010 in AA so I can not close FY 2010 in AA.
I have compare with ANLP and FS10N GL Balances of depreciation a/c and Accumulated Depreciation Account and found( GL Balances are equal in debit and credit side) that differences arrived in the posting period 03 only.
we have posted depreciation for the posting period 12 also. please advice how can I rectify it.
Regards
Sekhar

Need to restore iphone from icloud but my icloud and apple id for apps are different. How do I do this?

I had to erase my iphone 5 and do a full restore from my icloud back up. My icloud is under one apple id(email address) and my apps and itunes are under a different apple id (since I had itunes long before my iphone). How do I restore my apps? Thanks

I have always had two different ids as long as I have had my phone. Can i restore them from a itunes backup?

I installed the new update of OS X and now find the iMessages are different colors or shades of gray. Why?

Why are iMessages coming thru in different colors from different people? I haven't assigned color tags to these people. How did this happen and how can i change it?

http://www.apple.com/osx/whats-new/

Why Base and interface tables mandatory column are differant ?

Hi guys , i have load supplier into AP(ap_suppliers) through Interface table(ap_suppliers_int) but my confusion is that ap_suppliers have 8 mandatory columns but it's interface ap_suppliers_int have only 2 mandatory column.why?and also with these 2 columns record is successfully loaded into base so how it's get other mandatory columns value in base table or leave it .
Regards,
Shakeel khan
Edited by: shakeel khan on Mar 14, 2010 8:32 AM

Hi,
Refer to Oracle Payables Reference guide, section "Understanding the Suppliers Open Interface Tables"
Here is an extract:
The intent of the Supplier Open Interface Import is to emulate the entry of Suppliers,
Sites, and Contacts through the Supplier Entry form as closely as possible. As such,
there are many values that will be automatically defaulted if not provided by the user.
These defaults for Suppliers can come from AP_SYSTEM_PARAMETERS_ALL,
FINANCIALS_SYSTEM_PARAMS_ALL, PO_SYSTEM_PARAMETERS.ALL,
RCV_PARAMETERS, or hard-coded values. As these source tables are organized by
operating unit and the supplier data is not, the Suppliers Open Interface Import
program assigns a default organization to each run based on the responsibility of the
user initiating the concurrent request. This is necessary in order to determine which
default values to assign to supplier records.
The defaults for Supplier Sites generally come from the Supplier record. However, in
certain cases due to multiple organizations considerations, it is necessary to default
values for Supplier Sites from AP_SYSTEM_PARAMETERS_ALL or
FINANCIALS_SYSTEM_PARAMS_ALL.
J.

DV2617US Manual and Part Number on wire are different

Similar Messages

Maybe you are looking for