Dv2630ea , hdmi to toshiba tv will only work if pc is restarted.

when i plug my hdmi cable into my pc and tv i have to restart the pc before anything happens. then when the pc goes into idle it loses connection with the tv and i have to restart the pc again.
any ideas? usually all i had to do was insert the hdmi cable and the pc to tv link would initiate automatically.
i have my video card set to 'clone' mode with the pc as primary display.
can anyone help me? i use the pc a lot for windows media centre but its just started doing this and its a right pain to have to restart the pc all the time.

Has updating the video driver, corrected this issue...
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Similar Messages

  • My Ipod touch will only work when plugged into a itouch radio.  When I take it out, it goes blank.  Why can I do?

    My Ipod touch will only work when plugged into an Itouch radio.  When I take it out of the charger, it goes blank.  The battery shows fully charged.  It appears that the battery is no longer charging.  What should I do?

    Try a reset: Hold the home and power buttons at the same time until the Apple boot logo appears. No data will be lost. If that fails, the battery may have gone kaput.

  • I have a ipod mini from 2005, it will only work on my charger.  I did get a new ipod 4touch, how do i get the music to the new one if i don't know the password of the mini.  My ex-husband set it up for me, i not aboout to call and ask for the password.

    I have a ipod mini from 2005,  it will only work on my charger.  I did get a new i pod touch 4, how do i get the music from the old mini to the new touch.  I have never put any music on it myself, my ex-husband did it all and has the password.  I never new it.  I'm sure not about to call him and I don't think he'd give it to me anyway.  Please help!!!

    I don't think the password will matter, because you can't use anything on the iPod or in iTunes to transfer song files from iPod to computer (except for songs purchased from the iTunes Store).  However, there are third-party methods and utilities that can transfer from iPod to computer.  If you do a Google search on something like "ipod transfer," you should get some links.
    The simple software "lock" used on iPods should not prevent you from off-loading the song files.  Once the song files are on your computer, you can add them to your iTunes library.  Then, you can do a Restore on the iPod to give it a fresh start and sync it (and the iPod touch) as desired.
    NOTE:  For songs purchased by you from the iTunes Store, you can also re-download them to your computer at no cost, from the iTunes Store Purchased screen.  The link to Purchased is on the iTunes Store Home screen, under QUICK LINKS.

  • I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened full window it immediately closes and will only work with window smaller than maximum.

    I've just updated OS to 10.10.1 and Finder keeps trying to open and then closes every 2 seconds with the message Finder is not Available. If Safari is opened with the window full screen it immediately closes and will only work with window smaller than maximum. Driving me mad! Any help please!!

    Hi Linc
    Thank you for your response.
    I'm a bit of an amateur so I hope below is the information you've asked for:
    Step 1
    23/11/2014 09:19:14.007 ReportCrash[294]: Saved crash report for Finder[4349] version 10.10.1 (10.10.1) to /Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091914_BBBB-MacBoo k-Pro-2.crash
    23/11/2014 09:19:14.008 ReportCrash[294]: Removing excessive log: file:///Users/AAAA/Library/Logs/DiagnosticReports/Finder_2014-11-23-091840_BBBB -MacBook-Pro-2.crash
    23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x103809000): p=4357[Finder] final status 0x3000a00, denying page sending SIGKILL
    23/11/2014 09:19:14.000 kernel[0]: CODE SIGNING: process 4357[Finder]: rejecting invalid page at address 0x103809000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder[4357]) Binary is improperly signed.
    23/11/2014 09:19:14.454 com.apple.xpc.launchd[1]: (com.apple.Finder) Service only ran for 0 seconds. Pushing respawn out by 1 seconds.
    23/11/2014 09:19:15.584 Finder[4359]: assertion failed: 14B25: libxpc.dylib + 97940 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x89
    23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: cs_invalid_page(0x10bfbf000): p=4359[Finder] final status 0x3000a00, denying page sending SIGKILL
    23/11/2014 09:19:15.000 kernel[0]: CODE SIGNING: process 4359[Finder]: rejecting invalid page at address 0x10bfbf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    Step 2
    Process:               Finder [4626]
    Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    Identifier:            com.apple.finder
    Build Info: Finder_FE-932001003000000~1
    Responsible:           Finder [4626]
    PlugIn Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    PlugIn Identifier:       com.apple.finder
    -0 sec                         CODE SIGNING: cs_invalid_page(0x10c9a5000): p=4626[Finder] final status 0x3000a00, denying page sending SIGKILL
    -0 sec                         CODE SIGNING: process 4626[Finder]: rejecting invalid page at address 0x10c9a5000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    -2 sec                         CODE SIGNING: cs_invalid_page(0x10c5b3000): p=4624[Finder] final status 0x3000a00, denying page sending SIGKILL
    -2 sec                         CODE SIGNING: process 4624[Finder]: rejecting invalid page at address 0x10c5b3000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    -3 sec                         CODE SIGNING: cs_invalid_page(0x10f4bd000): p=4622[Finder] final status 0x3000a00, denying page sending SIGKILL
    -3 sec                         CODE SIGNING: process 4622[Finder]: rejecting invalid page at address 0x10f4bd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    -5 sec                         CODE SIGNING: cs_invalid_page(0x105ecf000): p=4620[Finder] final status 0x3000a00, denying page sending SIGKILL
    -5 sec                         CODE SIGNING: process 4620[Finder]: rejecting invalid page at address 0x105ecf000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    -7 sec                         CODE SIGNING: cs_invalid_page(0x1012cd000): p=4617[Finder] final status 0x3000a00, denying page sending SIGKILL
    -7 sec                         CODE SIGNING: process 4617[Finder]: rejecting invalid page at address 0x1012cd000 from offset 0x3f000 in file "" (cs_mtime:0.0 == mtime:0.0) (signed:0 validated:1 tainted:1 wpmapped:0 slid:0)
    --> __TEXT 000000010c966000-000000010ce55000 [ 5052K] r-x/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
        __DATA 000000010ce55000-000000010cf53000 [ 1016K] rw-/rwx SM=COW /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    0   com.apple.finder                                 0x000000010c9a521f 0x10c966000 + 258591
    10  com.apple.finder                               0x000000010c9977b5 0x10c966000 + 202677
    11  com.apple.finder                               0x000000010c988154 0x10c966000 + 139604
    12  com.apple.finder                               0x000000010c987e15 0x10c966000 + 138773
    13  com.apple.finder                               0x000000010c987d35 0x10c966000 + 138549
    14  com.apple.finder                               0x000000010c987cfd 0x10c966000 + 138493
    28  com.apple.finder                               0x000000010c96b960 0x10c966000 + 22880
    1   com.apple.finder                                 0x000000010c98a69d 0x10c966000 + 149149
    2   com.apple.finder                                 0x000000010c98aba7 0x10c966000 + 150439
    3   com.apple.finder                                 0x000000010c9795d2 0x10c966000 + 79314
    4   com.apple.finder                                 0x000000010c98aa0b 0x10c966000 + 150027
    5   com.apple.finder                                 0x000000010c98a952 0x10c966000 + 149842
    6   com.apple.finder                                 0x000000010c98a78a 0x10c966000 + 149386
    7   com.apple.finder                                 0x000000010c979496 0x10c966000 + 78998
    8   com.apple.finder                                 0x000000010c98a548 0x10c966000 + 148808
    9   com.apple.finder                                 0x000000010c98a410 0x10c966000 + 148496
    10  com.apple.finder                               0x000000010c983df6 0x10c966000 + 122358
           0x10c966000 -        0x10ce54ffb  com.apple.finder (10.10.1 - 10.10.1) <33C3024A-4A16-3485-B2B1-89FA33B9558A> /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
    Many thanks
    David

  • I have a new imac with imovie 11 however my hd everio camcorder will only work with imovie 8 or 9 how do i download imovie 9? all i can find are updates and my mac says i don't need it

    i have a new imac with imovie 11 however my everio hd camcorder will only work with imovie 8 or 9. i tried to download imovie 9 but my mac says i don't need the update. How can i download imovie 8 or 9 complete not the update?

    I really appreciate all your help. Today I spent some time on the problem. First I purchased  any video converter from the ap store and then I connected the camera to the mac with the original usb cable that came with the camera. I turned on the camera and selected backup on pc and the logo came up on my home page. I opened it and after several attempts i found the 3 video files that were on the camera. I then converted them from a tod file to mp4 and then transfered  them to imovie. Now I have to figure out how to send the video to youtube or move it to an external hard drive which I have not been able to do. So far I am not too fond of imovie 11. If you could send me  the download for imovie 6 I then could try that route. When talking to apple support yesterday about the problem they suggested to get Final Cut Express. It's 200 bucks so before i order the install disc i would like to try your suggestion. My email address is [email protected] Again I thank you very much for your help! George

  • My battery wont charge and my mac is brand new just says not charging will only work through charger

    the battery on my macbook air wont charge and will only work plugged into the charger its brand new only brought in july this year dont know why had to replace the charger as my son snapped the magnetic bit off it but now its saying not charging and turns off when i disconnect the charger dont know what to do as its brand new and ive only used it twice

    Try an SMC reset. See this link for instructions: http://support.apple.com/kb/ht3964

  • TS1630 My iphone4 speakers will only work when I receive a call or factime, but for nothing else. Why?

    My Speakers on my iphone4 will only work when I receive a call or facetime, and are muffled when an alarm goes off. Other than that, I have absolutely no sound from anything- text, music, videos, games, etc. UNLESS I use headphone. My phone will vibrate with text messages, though. When I try to turn up the volume on the side, it doesn't register any bars- the space for the volume boxes is blank. Also, there is no volume bar in my music when I try to turn up the volume. I have tried restarting my phone numerous times, I have also checked and rechecked the switch on the side to no avail. Does anyone have any troubleshooting ideas or know what might cause this?

    I tried this and noticed a little green inside the charging port. I panicked thinking it was corrupt, but found out if you lighting moisten the toothbrush with alcohol and gently scrub (with the power off) you can remove the green. I started inspecting one of our charging adapters, which had been giving us trouble, and it was very green inside. Not sure if it can transfer from one to the other?
    BUT now I have sound! Thanks for your suggestion, it helped!

  • Cannot type the letter "t" when phone is in portrait orientation. will only work when phone is in landscape.

    cannot type the letter "t" when phone is in portrait orientation. will only work when phone is in landscape.This causes some problems as some apps do not change orientation so when the "t" is needed to be entered it cannot be carried out

    Try the basic troublshooting steps described in the User Guide, Appendix B:  Resart, Reset, Restore using backup, Restore as new.

  • Usb will only work for powered devices

    I am having an issue to where my USB ports will only work for devices that have power supplied to them, ie an external hard drive that has a power adapter and not for devices that do not have power supplied to them.  I was seeing if anyone could help me resolve this issue?
    I have a Macbook Pro 15 inch Late 2011 model w/ the 2.2 Ghz i7 Processor.

    Eustace Mendis wrote:
    This is simply a case of the USB ports not being able to provide enough power. I do not know if there is a way to change this.
    This is highly unlikely, the USB specification (to which Apple adhere) requires a constant 1 amp at 5 volts, a peak of 2 amps for a brief period is available. All reputable manufacturers adhere to this spec, it is more likely a fault condition.
    To the OP, reset the Pram http://support.apple.com/kb/ht1379 
    and reset the SMC http://support.apple.com/kb/HT3964
    Reboot the machine and try again.
    If this brings no relief you should follow Oglethorpes advice and take it to Apple for repair.

  • I'm looking for the adobe suite 5.5 and it says it will only work on leopard or snow leopard... but i'm running on lion... anyone know what to do here?

    i'm looking for the adobe suite 5.5 and it says it will only work on leopard or snow leopard... but i'm running on lion... anyone know what to do here?

    Hi.
    I'm guessing that you'r not buying a new edition of the Adobe Suite 5.5.
    Apparently Adobe haven't been awake to make sure the 5.5 is 100% compatiable with Lion. However, I do believe it's only a few minor troubles you will experince and Adobe constantly update their software to adjust to Lion.
    You should go to Adobe.com and see the list of known issues.
    Best regards.

  • My iPhone 4 is 3 years old, and recently the Flash will only work WHEN it wants to... Anyone got any ideas what I need to do?

    My iPhone 4 is 3 years old, and recently the Flash will only work WHEN it wants to... Anyone got any ideas what I need to do? Does it need to be repaird in an Apple store? if so does anyone know roughly how much it would be? Or would a simple Restore work?
    Thank you in advance for replies

    Take it to an Apple store. Most likely you will have to get a replacement for which you will be charged the replacement fee.
    Rice only absorbs water. But it cannot prevent damage to the device.

  • My Imessage will only work when I have WiFi... right when I leave my house it stops working?

    My Imessage will only work when I have WiFi.. right when I leave my house my Imessage stops working? HELP

    Since this is an app-related issue, you may get better results solving your problem by contacting the app developer, or searching their help/FAQ pages.

  • HT1355 i need to know why my facetime will only work when im connected to wifi.

    i need to know why facetime will only work when connected to wifi.

    Facetime in cellular will only work on the iPhone 4S and iPhone 5, and only if the carrier supports it.

  • My ipod will only work in disc mode

    My iPod will only work in disc mode, when i take it off of disc mode it appears with the apple sign but nothing else -
    help please.

    Yes a Restore will erase your iPod. But this shouldn't be an issue since you obviously must have your music in your iTunes library or backed up somewhere else, RIGHT????? After all, it would be silly to have all your music on just the iPod and no where else, RIGHT?
    Patrick

  • G70-250US notebook synaptics mouse pad will not work & keyboard will only work until I log onto pc

    I have a G70-250US model notebook with Vista 32. I decided to reload OS due to issues with mouse pad and keyboard. I still have the same problem whereby the mouse pad will not work and keyboard will only work until I log in and then it will not work.  External mouse and keyboard will work fine.  I tried uninistalling drivers for both and rebooting and letting OS find new hardware and install the drivers and this still did not correct.  I even pulled down the synaptics driver from HP site and still not working.  I checked the BIOS and it is the most recent. I am at a loss. Any ideas on these issues. 

    Ok I tested a bunch of different Firefoxes on my pos linux box.
    '''''Worked with xmodmap:'''''
    Vanilla 16.0.2,
    Vanilla 16.0B6,
    Ubuntu Firefox 16.0.2 (16.0.2+build1-0ubuntu0.10.04.1)
    '''''Did Not Work with xmodmap:'''''
    Vanilla 17.0.1,
    Ubuntu Firefox 17.0.1 (17.0+build2-0ubuntu0.10.04.1)
    I have an old Dell Dimension 2400 I plan to use as a replacement for the Sony Vaio when it pops. I've held out as long as possible because it lacks a pci or usb wifi and I really didn't want to run 50 feet of cat5 up a flight of stairs to it. [as i type this i think i remember where a linksys stick for it might be]. Yes I guess it's about time I just do that.
    Don't laugh but the reason I held off adding a simple usb keyboard was just lack of space in my tiny bedroom. My setup is on two tray tables side-by-side. Sony Vaio is on left one, my lcd monitor and mouse are on the other. I barely have room to put a cup of coffee on the one with monitor and mouse let alone a full size usb keyboard lol.
    Anyway thank you again for all your help.

Maybe you are looking for

  • Sale unit of measure is not copied into Delivery from MF60 staging

    Hello all, we are using MF60 for EWM staging. Component has base unit of measure as M2. For production purposes, issue unit of measure was set to KG. I managed to get KG in MF60 during staging, but Outbound delivery created contains however unit M2.

  • Discrepency in "actual size" view and PDF export result

    I am working with a document and am confused about the size when I export it as a PDF. When I export it and open it up, the size of the fonts is considerably larger than those in my document in "actual size" viewing mode. Also, the page sizes are als

  • I have a weird message showing up in iTunes.

    Every time I open iTunes i get this message." Do you want application "iTunes.app" to accept incoming connections? Clicking deny may limit the application behavior. This setting can be changes in firewall pane of security and privacy preference." I k

  • "D2008178" - FM to calculate the date of the x day in a year

    Hi all! I am looking for a FM to calculate the date of a certain day in the year. For example which date has the day 178 of the year. This has nothing to do with the factory calendar!!! Thanks a lot for your help CU Peter

  • DTD validation

    Hi All, I am using Sax parser (jaxp1.1), I have directed to validate the xml using setValidating(true), even then it is not validating the data against DTD spec. PLease let me know the possible things to be checked. Thanks Sathish