Dv4 1123us hdmi sound crackling

Hi All,
I have a dv4 1123us.
When I connect the laptop to my tv , the sound is popping and cracking every few seconds.
I tried with a different laptop and there wasn't any problem.
I also downaloded the most recent drivers but it didn't help either.
What else can I do?
Thanks for the help

Hi All,
I have a dv4 1123us.
When I connect the laptop to my tv , the sound is popping and cracking every few seconds.
I tried with a different laptop and there wasn't any problem.
I also downaloded the most recent drivers but it didn't help either.
What else can I do?
Thanks for the help

Similar Messages

  • HP Pavillion DV4 1123us power adapter problem

    Hi,
    After using the HP Pavillion DV4 1123us for two years suddenly I noticed that the power adapter is not supplying power to the computer and it is making some not too loud repeatitive sound. I replaced the power adapter with HP 90W Smart Power Adapter which worked fine for a few weeks and then I noticed whenever I connect this to the wall outlet it makes some repeatitive chirping sound and this is also not suppying power to the computer anymore. It behaves like this even when it is not connected to the laptop which indicates that there is some problem with the adapter and not with the internal powers supply of the laptop. It is so surprising that the replacement power adapter stopped working so early.
    In my home all the other laptops are working just fine and and found all of them are two pin  - only these two are three pin. Not sure if this has gota anything to do with this fault.
    Any help on this matter will be highly appreciated.

    Hi,
    Please check your other post:
        http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Bios-Password-Forgot/m-p/326509...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I troubleshoot a blue screen on a Pavilion dv4-1123us with "hardware malfunction call hardware vendor for support" message?

    I keep getting this screen and before I have to call and pay and wanted to see if there was something that I could do.
    Pavilion dv4-1123us  get blue screen with "hardware malfunction    call hardware vendor for support"
    This question was solved.
    View Solution.

    I would say its just a conicidence and recommend you to do a system restore. As its an intermittent problem, you never know if you face same issue once again.
    //Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
    I am an HP employee!!

  • Hp pavilion dv4-1123us Media Card won't read

    I have a hp Pavilion dv4-1123us laptop that won't read a 16 GB SDHC media card. The card works in my PC, so the card is good. I have a Scandisk 5-1 media reader hooked to my home PC that would not read it but I found through Scandisk site I needed to download the latest Firmware which I did and now the card works on my PC. The reader has always and still does read a 512 MB and a 2 GB XD cards on my laptop. I am running XP Pro OS.
    I have searched the HP site for driver downloads but only see them for Windows 7 and 8 not XP.
    Can someone help me on this?

    Hello wgray826,
    You’re having a problem not being able to read a 16GB SDHC card.
    I think that your computer does not support the SDHC card.
    Here is a link to your user guide and what cards it supports.
    I noticed that it shows the Secure Digital but not the Secure Digital High Capacity.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

  • Running Windows 7(32) on MBA - sound crackling, stuttering

    I did a search on this and found some posts from other users (see below)but no solution. I have upgraded the driver to 6.0.1.6235, I have installed the recent update of Bootcamp (3.2.2646), but the issue remains. Sounds playing in different applications are effected, though it seems to be more frequent when playing locally stored content (buffering??)
    When running in MacOS 10.6, the sound works perfectly. Have anyone managed to solve this? Or, perhaps someone NOT having this issue could get in touch, so I could try to replicate your settings/drivers.
    Ola
    Old posts:
    Running Windows 7 RTM on MBA - sound crackling, stuttering
    Posted on: Oct 16, 2009 12:17 AM, by user: AllanMAX -- Relevance: 100%
    Hi,
    I have a 09 MacBook Air with 128GB SSD and 2GB RAM.
    Now, I have installed Windows 7 RTM Build 7600 on my MBA and it always suffer sound crackling, shuttering when playing music ...) but with all of them problem is still not resolved. It stutters, scratches, sounds metallic, etc.
    Does anyone have the same issue on the new MacBook Air? Or how I can get this resolved
    Re: Running Windows 7 RTM on MBA - sound crackling, stuttering
    Posted on: Mar 6, 2010 2:08 PM, by user: ExcelonGT -- Relevance: 47%
    , Win 7 x64 RTM since August 09.
    Just this week, I reinstalled Windows 7 x64 fully legit ... NEVER had this stuttering problem until now. I was running Bootcamp 2 under Windows 7 before ...I don't think this is a hardware issue and here is why:
    I have a Rev A MBA (1.8ghz ....0.1.5936
    I really think this issue is caused by the Realtek Driver and/or Bootcamp 3.0/3.1
    Re: Running Windows 7 RTM on MBA - sound crackling, stuttering
    Posted on: Nov 22, 2009 10:04 PM, by user: DarniederProductions -- Relevance: 43%
    I had the same problems but now I’m running win 7 on boot camp instead of parallels and I have no sound at all. The head phone jack has a ominous red light emanating out of it as well! HELP!!!!
    Re: Running Windows 7 RTM on MBA - sound crackling, stuttering
    Posted on: Feb 1, 2010 7:38 PM, by user: godudi -- Relevance: 38%
    I have the same problem, and also tried several drivers from Realtek Website.
    Also updated bootcamp to 3.1 but problem still exists!!
    At the beginning i thought it might be HW related problem, but sound works flawlessly on MAC OS.
    Any advice?
    David

    I don't think this is a hardware issue and here is why:
    I have a Rev A MBA (1.8ghz, 64gbSSD) purchased in Feb 2008. Ive run OSX 10.5 Leopard for a year, and Win7 x64 Beta since Feb 09, Win 7 x64 RTM since August 09.
    Just this week, I reinstalled Windows 7 x64 fully legit version. I installed the OS as my only OS, and installed Bootcamp 3.0 and then 3.1.
    Ive NEVER had this stuttering problem until now. I was running Bootcamp 2 under Windows 7 before and didnt have any problems with stuttering audio.
    My current version of Realtek drivers is 6.0.1.5936
    I really think this issue is caused by the Realtek Driver and/or Bootcamp 3.0/3.1

  • How do i fix the hdmi sound on mini lion server 10.7.5

    After upgrading to anythig past 10.7.3 the HDMI sound on my mini server does not woek. I need to know either how do I fix the sound or how can I roll back to 10.7.3

    Iwas able to fix this issue by going to the Audio Midi setup paneal and changing to 48K bit rate.Works fine now....

  • Hdmi sound on my mac mini has stopped working after I upgraded the OS

    I just upgraded the iOS on my Core i5 Mac mini to 10.8.5 and my hdmi sound on my monitor stopped working. I have tried rebooting and adjusting the Audio midi settings and nothing seems to work. I know the mac mini speakers are working and the monitors speakers are working. What do I try next?

    Resetting the NVRAM / PRAM, as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • K7n2delta-L sound crackle problem

    hi. I experience sound crackling with the MSI K7n2 delta-L board. It happens when for example, im in the middle of a conversation in NetMeeting, and i hear a sound alert in YM, the sound crackles then in the conversation after that. I also hear sound crackling in the game Syberia 2. I wonder where the problem lies, in the hardware or the driver. I've installed the latest nforce drivers from the nvidia site. Here are the specs of my computer:
    Amd Athlon 2500
    512mb DDR
    MSI K7n2 delta-L board
    Geforce 3 ti200
    PS. I also have an old Sound Blaster Live card installed in the PCI slot. But i just use it for it's game port purposes because the MSI board doesn't have one.

    thanks man. i downloaded the realtek sound drivers and problem went away. The spec for the K7n2delta-L was really misleading because when you look at the product page, it says that the only difference between the two products was the raid on the lan and the firewire ports. it never said anything on omitting the sound storm audio on the L version. So I suppose that was the problem cause i was using the nvidia drivers all the time on realtek sound.
    Thanks again.

  • No HDMI sound to my TV with my g6 notebook with HDMI Codec drivers installed.

    No HDMI sound to my TV with my g6 notebook with HDMI Codec drivers installed using Windows 7.

    Having the same issues, any help would be appreciated.

  • HDMI sound problem

    i have my MBP hooked to my HDTV via HDMI how do i get sound to run through my TV?

    Satellite C855-22M Specifications
    Satellite C855-22M Downloads
    This is actually the peer support forum for Toshiba USA. While you are still welcome here, yours would appear to be Toshiba Europe model, perhaps from Hungry. In the future, you may want to consider using the Toshiba Europe Forum.
    Given your problem, I would try to reload your latest Toshiba supplied display driver, as it is this driver which handles HDMI sound. While we are at it, let's reload your Intel Chipset Utility as well. Download these two drivers, these are .zip files, so you will have to extract the .exe files and double click on the .exe files to install, rebooting after installing each one, in this order:
    Intel Chipset Utility
    AMD Display Driver
    After the second reboot, test your HDMI sound again.
    Please let us know what happens. Good luck.
    Mike

  • HDMI Sound Problem - Qosmio X70-A

    Hi All ... 
    I have problem with HDMI sound on tv , when i connect the HDMI the sound comes from my Leptop not from the TV ive been days looking for solution downloaded from toshiba drivers and didnt solve , and download from Intel and didnt work also i used Driverpack Solution and didnt work , this is driving me crazy i cant find the solution .
    Here is everthing about my Leptop 
    http://speccy.piriform.com/results/BCQgMSFdfyw6pNtAOwKSexp
    and here some image of Playback and sound driver and Intel display al up to date please help me , i have 2 TV one is samsung and another is LG and i tried 2 HDMI one from PS4 and another from reciver ... i dont know how to solve this please help , and thanks alot 
    Attachments:
    Intel Up to date.png ‏664 KB
    Sound Drivers.png ‏226 KB
    Playback.png ‏117 KB

    If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
    - Peter

  • [SOLVED] no hdmi sound (Radeon HD 7700/7800 Series)

    Pulseaudio detects the sound card, and paplay gives sound but totem or youtube movies doesn't give any sound. Gnome sound volume test gives sound though. What should I do to fix the hdmi sound?
    'pactl list sinks' shows:
    Sink #0
    State: RUNNING
    Name: alsa_output.pci-0000_07_00.1.hdmi-stereo
    Description: Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 6
    Mute: no
    Volume: front-left: 43861 / 67% / -10.46 dB, front-right: 43861 / 67% / -10.46 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_07_00.1.hdmi-stereo.monitor
    Latency: 1182766 usec, configured 1999818 usec
    Flags: HARDWARE DECIBEL_VOLUME LATENCY SET_FORMATS
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "HDMI 0"
    alsa.id = "HDMI 0"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "3"
    alsa.card = "1"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:07:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aab0"
    device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    device.string = "hdmi:1"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "hdmi-stereo"
    device.profile.description = "Digital Stereo (HDMI)"
    device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series] Digital Stereo (HDMI)"
    alsa.mixer_name = "ATI R6xx HDMI"
    alsa.components = "HDA:1002aa01,00aa0100,00100300"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    hdmi-output-0: HDMI / DisplayPort (priority: 5900, available)
    Active Port: hdmi-output-0
    Formats:
    pcm
    Sink #1
    State: SUSPENDED
    Name: alsa_output.pci-0000_00_14.2.analog-stereo
    Description: Built-in Audio Analog Stereo
    Driver: module-alsa-card.c
    Sample Specification: s16le 2ch 44100Hz
    Channel Map: front-left,front-right
    Owner Module: 7
    Mute: no
    Volume: front-left: 50112 / 76% / -6.99 dB, front-right: 50112 / 76% / -6.99 dB
    balance 0.00
    Base Volume: 65536 / 100% / 0.00 dB
    Monitor Source: alsa_output.pci-0000_00_14.2.analog-stereo.monitor
    Latency: 0 usec, configured 0 usec
    Flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY
    Properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "ALC892 Analog"
    alsa.id = "ALC892 Analog"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "0"
    alsa.card_name = "HDA ATI SB"
    alsa.long_card_name = "HDA ATI SB at 0xfeb00000 irq 16"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:00:14.2"
    sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "4383"
    device.product.name = "SBx00 Azalia (Intel HDA)"
    device.form_factor = "internal"
    device.string = "front:0"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "Built-in Audio Analog Stereo"
    alsa.mixer_name = "Realtek ALC892"
    alsa.components = "HDA:10ec0892,10438436,00100302"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    Ports:
    analog-output-lineout: Line Out (priority: 9900, not available)
    analog-output-headphones: Headphones (priority: 9000, not available)
    Active Port: analog-output-lineout
    Formats:
    pcm
    'pactl list short sinks' shows:
    0 alsa_output.pci-0000_07_00.1.hdmi-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
    1 alsa_output.pci-0000_00_14.2.analog-stereo module-alsa-card.c s16le 2ch 44100Hz SUSPENDED
    I've already tried to comment "load-module module-suspend-on-idle" in /etc/pulse/default.pa file, but it shows idle instead of suspended. Anyone have any idea what might be wrong with the pulseaudio?
    Last edited by ahcaliskan (2015-05-19 15:45:53)

    Sound still not working. Here is the pulseaudio output:
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: setpriority() worked.
    I: [pulseaudio] core-util.c: Successfully acquired nice level -10, which is lower than the requested -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
    D: [pulseaudio] main.c: Running on host: Linux x86_64 4.0.3 #1 SMP PREEMPT Thu May 14 08:58:24 UTC 2015
    D: [pulseaudio] main.c: Found 8 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is 95303e48bec149d190471b0a51ab134e.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/ahc/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 MMXEXT
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-stream-volumes'.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: [pulseaudio] database-gdbm.c: Opened GDBM database '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database.x86_64-unknown-linux-gnu.gdbm'
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/ahc/.config/pulse/95303e48bec149d190471b0a51ab134e-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    D: [pulseaudio] alsa-util.c: Trying hw:1,3 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:1,3
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 88200 samples), period size second (to 88200 samples).
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hw:1,3.
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    D: [pulseaudio] module-device-restore.c: Database contains no data for key: sink:alsa_output.hw_1_3
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.hw_1_3" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HDA ATI HDMI"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HDA ATI HDMI at 0xfe760000 irq 58"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:07:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aab0"
    I: [pulseaudio] sink.c: device.product.name = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] sink.c: device.string = "hw:1,3"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.description = "Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    D: [pulseaudio] module-device-restore.c: Database contains no data for key: source:alsa_output.hw_1_3.monitor
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: source:alsa_output.hw_1_3.monitor:null
    I: [pulseaudio] source.c: Created source 0 "alsa_output.hw_1_3.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
    D: [pulseaudio] alsa-sink.c: setting avail_min=87310
    D: [pulseaudio] alsa-util.c: snd_pcm_dump():
    D: [pulseaudio] alsa-util.c: Hardware PCM card 1 'HDA ATI HDMI' device 3 subdevice 0
    D: [pulseaudio] alsa-util.c: Its setup is:
    D: [pulseaudio] alsa-util.c: stream : PLAYBACK
    D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
    D: [pulseaudio] alsa-util.c: format : S16_LE
    D: [pulseaudio] alsa-util.c: subformat : STD
    D: [pulseaudio] alsa-util.c: channels : 2
    D: [pulseaudio] alsa-util.c: rate : 44100
    D: [pulseaudio] alsa-util.c: exact rate : 44100 (44100/1)
    D: [pulseaudio] alsa-util.c: msbits : 16
    D: [pulseaudio] alsa-util.c: buffer_size : 88192
    D: [pulseaudio] alsa-util.c: period_size : 44096
    D: [pulseaudio] alsa-util.c: period_time : 999909
    D: [pulseaudio] alsa-util.c: tstamp_mode : ENABLE
    D: [pulseaudio] alsa-util.c: tstamp_type : MONOTONIC
    D: [pulseaudio] alsa-util.c: period_step : 1
    D: [pulseaudio] alsa-util.c: avail_min : 87310
    D: [pulseaudio] alsa-util.c: period_event : 0
    D: [pulseaudio] alsa-util.c: start_threshold : -1
    D: [pulseaudio] alsa-util.c: stop_threshold : 6205960286516543488
    D: [pulseaudio] alsa-util.c: silence_threshold: 0
    D: [pulseaudio] alsa-util.c: silence_size : 0
    D: [pulseaudio] alsa-util.c: boundary : 6205960286516543488
    D: [pulseaudio] alsa-util.c: appl_ptr : 0
    D: [pulseaudio] alsa-util.c: hw_ptr : 0
    D: [alsa-sink-HDMI 0] alsa-sink.c: Thread starting up
    D: [alsa-sink-HDMI 0] core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [alsa-sink-HDMI 0] alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: [pulseaudio] module-device-restore.c: Database contains no (or invalid) data for key: sink:alsa_output.hw_1_3:null
    I: [pulseaudio] module.c: Loaded "module-alsa-sink" (index: #5; argument: "device=hw:1,3").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-6.0/modules/module-udev-detect.so': success
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:0d.0/0000:07:00.1/sound/card1 is busy: yes
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:14.2/sound/card0 is busy: no
    D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_14.2" card_name="alsa_card.pci-0000_00_14.2" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"'
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus 927ea15335ea5cfa45d57cb0555b4740 as :1.28
    D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HDA ATI SB/HDA ATI SB.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA ATI SB
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA ATI SB use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA ATI SB
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf'
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile input:analog-stereo supported.
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-front-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-rear-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-internal-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-dock-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-linein.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-aux.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-video.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-tvtuner.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-fm.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic-line.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headphone-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-headset-mic.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-input-mic.conf.common'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-front-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-rear-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-internal-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Internal Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-internal-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-dock-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-dock-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-aux'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-tvtuner'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-fm'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-mic-line'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headphone-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Auto-Mute Mode' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headphone-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-headset-mic'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headset Mic Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=1).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=2, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Inverted Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-headset-mic', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
    D: [pulseaudio] alsa-mixer.c: Path Set 0x1134570, direction=2
    D: [pulseaudio] alsa-mixer.c: Path analog-input-front-mic (Front Microphone), direction=2, priority=85, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Front Mic (analog-input-microphone-front/analog-input-microphone-front) index=0, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic, alsa_name='Front Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Front Mic Phantom, alsa_name='Front Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-front (analog-input-microphone-front) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-rear-mic (Rear Microphone), direction=2, priority=82, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Rear Mic (analog-input-microphone-rear/analog-input-microphone-rear) index=1, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Rear Mic, alsa_name='Rear Mic Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Rear Mic Phantom, alsa_name='Rear Mic Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-microphone-rear (analog-input-microphone-rear) priority=0
    D: [pulseaudio] alsa-mixer.c: Path analog-input-linein (Line In), direction=2, priority=81, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=46, min_dB=-16, max_dB=60
    D: [pulseaudio] alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Line Boost, direction=2, switch=0, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: [pulseaudio] alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, volume_limit=-1, enumeration=1, required=0, required_any=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: [pulseaudio] alsa-mixer.c: Option Line (analog-input-linein/analog-input-linein) index=2, priority=0
    D: [pulseaudio] alsa-mixer.c: Element Front Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Element Rear Mic Boost, direction=2, switch=0, volume=2, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no
    D: [pulseaudio] alsa-mixer.c: Jack Line, alsa_name='Line Jack', detection possible
    D: [pulseaudio] alsa-mixer.c: Jack Line Phantom, alsa_name='Line Phantom Jack', detection unavailable
    D: [pulseaudio] alsa-mixer.c: Setting analog-input-linein (analog-input-linein) priority=0
    D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: [pulseaudio] alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: [pulseaudio] alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: [pulseaudio] alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open plug:hw:0
    D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-mono - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:analog-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-mono+input:iec958-stereo - will not be able to open output:analog-mono
    D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
    D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
    D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: [pulseaudio] alsa-util.c: Managed to open front:0
    D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
    D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
    D: [pulseaudio] alsa-mixer.c: Profile output:analog-stereo supported.
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-lineout.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-speaker.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output-headphones-2.conf'
    D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/analog-output.conf.common'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output'
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-lineout'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out CLFE Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Surround Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Side Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-speaker'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Out Front Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Speaker Front Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=2, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Front' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Surround Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Surround' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Side' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker Side' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Center Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'LFE Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker CLFE' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'PCM' succeeded (volume=1, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'External Amplifier' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Bass Boost' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958' succeeded (volume=0, switch=2, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'IEC958 Optical Raw' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Analog Output' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-output-speaker', none of required-any elements preset.
    D: [pulseaudio] alsa-mixer.c: Probing path 'analog-output-headphones'
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Jack' succeeded (found!)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Phantom Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of jack 'Headphone Mic Jack' succeeded (not found)
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Hardware Master' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Master Mono' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone+LO' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone' succeeded (volume=1, switch=1, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headset' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Line HP Swap' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Headphone2' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Speaker' succeeded (volume=0, switch=0, enumeration=0).
    D: [pulseaudio] alsa-mixer.c: Probe of element 'Desktop S

  • Macbook Pro Retina Display hdmi sound out.

    Hi everyone,
    Does the MBP Retina have hdmi/sound out?
    When I connected it to my HDTV the image was ok, but there wasn't any sound on my sound system. The only sound was through the mac's speaker's.
    Is there any way to solve this problem?
    Cheers,

    Go into the Sound Option in Sys Prefs and select the HDMI as the output source.

  • Why does the hdmi sound out stop working once I start using eyetv?

    I upgraded to Lion and now I have a few problems. I use the Elgato EyeTV to record television on my Mac Mini. I have been using it for a few years. Now once I watch something on my EyeTV the hdmi sound output stops working and I have to reboot to be able to hear audio from iTunes or anything other then EyeTV. Why is this happening and when will there be an update to fix it?

    There were numerous audio issues with OSX 10.6.8 that
    were carried over into Lion and not resolved.  Issues
    with EyeTV was just one of them.  May want to check
    the Snow Leopard forum for workarounds, if any for your case.

  • Win 7 HDMI Sound Gets Only 2-Channel Stereo

    My system specs (and advertising) state that it is HDCP compliant and has 8 channel sound, but Windows 7 (32-bit) reports that
    the HDMI sound is not HDCP compliant, is limited to a maximum of 2 channels and there are no supported sound Codecs (Control panel > sound > HDMI properties). 
    I ran the Cyberlink BD & 3D Advisor, and my system, including the HDMI cable, passed the HDCP test. 
    HDMI sound works with the left and right speakers but not with the center or rear speakers. 
    The HDMI sound driver is by Microsoft, even after installing the nVidia HDMI audio driver. 
    The driver for the other sound devices is by RealTek. 
    The RealTek driver reports that it supports Dolby Digital and DTS while the Windows HDMI driver supports no formats. 
    Windows, chipset drivers, sound driver and video driver are all up-to-date.
    System:
    Motherboard: Asus P5N7A-VM (chipset NVIDIA GeForce 9300/nForce 730i)
    CPU:
    Intel core 2 duo E7500
    RAM: 4GB
    PC2 6400
    Sound chip on motherboard:
    Realtek ALC1200 with 8-channel High-Definition Audio Codec
    Video chip on motherboard:
    nVidia GeForce 9300
    Tuner cards: Two
    Hauppauge HVR-2250
    HDTV: Sharp LC-42D62U
    Receiver: Pioneer
    VSX-821-K (5.1 surround sound)
    Here are the sound properties for HDMI vs. RealTek digital optical
    Thanks in advance!

    Hi,
    I am just writing to check the status of this thread. Was the information provided in previous reply helpful to you? Do you have any
    further questions or concerns? Please feel free to let us know.
    Regards,
    Alex Zhao
    TechNet Subscriber Support
    in forum
    If you have any feedback on our support, please contact
    [email protected]
    Alex Zhao
    TechNet Community Support

Maybe you are looking for

  • Need to Add field EKET-EINDT and EKET-SLFDT to ME2M Report output in ALV

    Hi All, I need to add fields EKET-EINDT and EKET-SLFDT to the output of program ME2M Transaction. I have appended the structure MEREP_OUTTAB_PURCHDOC with these fields. and it is coming in the ALV output field catalog. I need these fields output only

  • JDEV11G / Database diagram / creating a new table in an existing schema

    When you drag the table object from the component palette into an existing diagram linked to a schema, jdev reload each time the list of object contained into the schema even no changes was made into that list. In takes 10-15 seconds in a duo-process

  • How to Call standard iView from WebDynpro custom iView

    Hello all Experts I want to know whether there is any way to call (navigate to) standard iView from my cutom WebDynpro iview or not? If yes please tell me how to code it. (Points will be awarded for helpful answers)

  • Anyway to force a user to logout?

    Hi, I wonder whether there is a way for root to force a user out of the system, if the user is currently in it. I get two reasons to do it: 1) sometime after a remote telnet PC crash, I find the user is reported to be still in the host from "who". I

  • Store number with trailing 0's

    Whatever the user enters as decimal places must be preserved. E.g. if the user enters 10.24000 then a five decimal place number must be stored. How to achieve this if i dont want data type as varchar