Dv4 1241TX issue getting too much heated, processes are very slow

I've got Pavilion dv4 1241tx notebook. 11 months old. only genuine s/w including OS installed.
It gets heated up very fast, you can actually fry an egg on that i guess.
the processing gets very slow that simple game like counter strike (needs 256 ram, mine is 3 gb ram) doesn't run smoothly.
HP has to to something for this problem. today i went to the athd. service center and the guy told me to hand-over the laptop for checking. i wrote a mail to HP care, but i guess HP is minting toooo much of money, so why bother.
As compared to other laptop (dell, lenovo) HP comes at a price almost similar to them but the overall performance is pathetic.i have been an computer pro right from my school days and now regret of not buying the MAC.
HP guys please reply if you have any solution to my problems. otherwise i guess this is how HP works.
Thanks,
Soham Roy
SAP GRC Consultant

Thanks for your response.
How would I check these details. Excuse my ignorance, but I am not too sure where I need to look.
Would I find those detail in Network Settings?

Similar Messages

Playing Video files taking too much CPU processing(50 % )

Hello everyone,
My macbook taking too much CPU processing power for playing Video file.Below shared the statistics..Is it a issue..? can you please help me here..I can't play simultaneously 2-3 MKV videos..distorted picture Quality.
Macbook:
mkv
     Qucik Time PLayer (using perian plugin):50%
     vlc:40%
      mplayer:60%
normal(example Mp4)
     Qucik Time PLayer (using perian plugin):30%
     vlc:25%
where a normal Linux system takes
mkv file with VLC : 20-25%
Thanks in advance...

Simple thing to try would be to disable composite and see how you fare then
Check the logs first, though

C560 - Too much heat at monitor after Win 10 upgrade

Hi Friends, Before upgrading to win 10, I made clean format to win 8.1 and updated it full. After upgrading to win 10, right side of the monitor (up to down) there is too much heat and is untouchable cause of heat. Also, the hardisc and display card is making too much noise after upgrade to win 10. Is it normal? And what can I do?

Hi ebordon,
Thank you for considering Sony Community!
I am sorry to hear your issue but let's try to isolate this. Hopefully will be able to boot your unit to Windows. Since this is a U.S. model, these steps are applicable to your unit.
Remove all peripherals -> look for a battery off button or pinhole on the bottom of the laptop -> push the button for 5 seconds.
Reset BIOS.
Safe Mode.
If you're planning to roll back to the previous operating system, please visit this page: How to go back to a previous version of Windows after Windows 10 has been installed.
For other concern and for further assistance, we kindly recommend visiting our Sony Global Web site for information on contacting the Sony Support Center in your region at http://www.sony.net/SonyInfo/Support/.
Hope these help.
Regards,
Vincent
If my post answers your question, please mark it as "Accept as Solution"

HT1694 Can you do a delete all for junk mail, i get too much each day?

Can you do a delete all for junk mail, i get too much each day?

wuischke wrote:
I've no personal experience with xen or openvz, but I also have this problem.
My solution is to run a headless Debian (my server runs Debian) VM in VirtualBox and access it via SSH. Performance is no problem (C2D 1.6 GHz without VT-x, 1GB RAM, CPU usage for the VM is at ~1%), although database operations are slower compared to the server. Beware of RAM usage with many VMs, though.
Portability was no problem for me since I run the same operating system on the server and inside the vm - basically it's just copying files and merging configuration files. It was actually more of a problem when I used Arch for development. Moving the VM to another computer is even easier, you just need VirtualBox and no special configuration.
I recommend you to give it a try - maybe it's what you need and you saved yourself a lot of work.
Hi wulschke,
yeah I've been messing with virtualbox myself, and like you, had a pretty good experience.
However, i can't see myself running a dedicated VM for each server, and shoving everything into a VM felt like I was hiding my mess in the closet
I'm seeing this setup as a way to start getting, and above all, staying, organized.
This wiil be my fallback solution though, if the container-type thing doesn't work out, or ends up being too much overhead.

I updated IOS 6 in my device, it is performing worse. Consuming too much battery in a very short time. How can I "downgrade IOS version?

I updated IOS 6 in my device, it is performing worse. Consuming too much battery in a very short time. How can I "downgrade IOS version?

Downgrading isn't supported and wouldn't help. You need to fix your phone.
1. Delete and reinstall all email accounts.
2, Restore the phone in iTunes, first using a backup and if needed as a new phone.
iTunes: Restoring iOS software

XI message processing is very slow

XI message processing is very slow.I did everything in tuning guide, but it is still very slow.
I executed <b>DB13-->Check and update optimizer statistics</b>
XI message is faster in another XI server.Although another XI server's hardware is weaker.
I checked DB2 tablespaces and extend them.
What can I do for higher performance?
Thanks.

Hi Cemil
The following thread can throw some light on what you are looking for..
Where could I find the information about XI performance?
Also, check the following pdf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3fbea790-0201-0010-6481-8370ebc3c17d
Regards
krishna

Satellite U500 - Copy process is very slow

Hi friends,
I'm using Satellite U500-1f5, for last 2 months. It is core i5 with Windows 7. Still the copying process is very slow and some times booting is little bit slower.
Can anyone post a valid answer to resolve this problem?

Hey mate,
Sounds like that you have installed a lot of software that slows down the performance of your notebook.
So which programs you have installed?
Theoretically it could also be caused due a virus or trojan. You should check your notebook for viruses using a good antivirus program like AntiVir.
Try also to defragment the HDD. If you install/uninstall many programs, you should defragment the HDD from time to time. You can use the integrated Windows defragmentation tool.

Heat and a very slow Satellite A75-S211

I read on an earlier post that air intakes on the laptops can become dusty, so I vacumed out both on my girlfriend's computer (which is the problem computer here).
The fans had been running on high almost constantly for some time. I managed to get three large dust balls out (had to pick them through the screens). This did wonders for the fan speeds which seem normal now, and I guess the heat is better, although I did not use the computer that much before.
I downloaded a utility I learned about on another forum and determined the processor was running about 40 degrees C, 104 F. I think this is maximum recommended, but I am not sure. My questions are this (assuming the heat issue is, for the most part, cured):
is there a performance reducing measure that the computer takes to guard against superheating the processor (I am pretty sure there is) and does it need to be "turned off" once the temperature issue is resolved (particularly if the issue was longstanding)?
are there any diagnostic programs out there that can tell me if the processor is damaged, by heat or any other cause?
Thanks,
L

Hi Larry,
Assuming that you are using the Toshiba Power management utility rather than the Microsoft version then your notebook will usually follow a distinctive behavioural pattern if the CPU gets too warm.
Typically, as you have already discovered, the fans will increase in both speed and frequency until they are running at top speed for most of the time (assuming that the Power Management utility is set for Maximum Performance). If the CPU still gets too warm then the notebook will eventually power itself off in order to prevent any damage. However it is quite likely that the CPU will still get hotter since the power off will also stop the cooling fans.
The Toshiba Power Management utility can also be set to change this behaviour by slowing down the CPU in order to keep it cooler and thus reduce the noise made by the cooling fans.
Following a reboot the Power Management Utility should return to its designated setting which will be whatever you had set it to originally.
The thermal switch that controls the automatic power off if the CPU overheats should have quite a high overhead to make sure that the CPU is un-damaged.
regards,

Having issues with 13" MacBook Pro. Running very slow and blank screen and sleep mode.

Bought my MBPro summer 2009. About a month / 6 weeks ago it began to run extremely slow at points. Now it is running poorly and getting very slow on a daily basis, to the point where it will not open applications, documents or even web pages for in excess of 5 minutes. I'm beginning to lose patience!
Also at the exact same time of these performance issues occuring, my MacBook Pro will not awaken from sleep mode when the lid is closed. Showing a blank dark screen and having to hard reset in order to boot up my system again and get it running.
What is the best solution in order to resolve these issues?
Your help is greatly appreciated.

Did you run Disk Utility>First Aid? If so what were the results? This is a copy of mine, note that the bottom line says: The partition map appears to be OK:
Ciao.

The latest issue of Pages for iPad: 1. Very slow. 2. Late in reacting to typing. 3. When I go to a specific file, informs me that some images were deleted and therefore file has been changed. Then when OPEN option used, opens file slowly. Please, help!

What I have to do to correct the following problems with Pages app. For iPad:
Hesitates to display results of typing, some times for 5-6 characters;
Very slow in opening files;
Before opening of a specific file displays message: DOCUMENT DETAILS. SOME CHANGES WERE MADE TO YOUR DOCUMENT. SOME IMAGES ARE MISSING BECAUSE THEY WERE DELETED FROM YOUR DOCUMENT. We'll, nothing is missing. But it takes forever to open this file. The previous issue of Pages worked very good. But they would not let me to go back to it. Please, help!

Tmobile did the exact same thing to me. So that is customer service at work in general. Nice try though lol.
To the OP
I see you said You paid for shipping, did you Insure it? Claim insurance on it. If you did not, It may not be Verizon or your fault in the sense of the phone not making it to the warehouse. There are people out in the postal world that will steal phones that are not insured. It could have been a Verizon employee, i suppose.
But, if this was to be a bought in court, if you shipped it with out insurance, sadly your at fault.
Do you still have the Serial number of your old phone? If so, you should be able to track where your phone is (if it is reported as a defect/damaged) If so, you may be able to use that as proof. If it does not show up as a defect or what ever they determine use as a loss, then you know it did not make it to the warehouse to be checked in. I would suspect Apple or Verizon could tell you what the Serial number came up as.

My computer has been getting the pin wheel and moving very slow since the i downloaded yosemite

Whenever i have a video playing from my internet browser it causes my computer to pin wheel and go into thinking mode with all of my apps that are open. It moves very slow and i have to force quit everything and reboot my computer to make it act normal. this all started after the software update. Any suggestions>

Mine has been moving extremely slow, too. I had a problem downloading and installing Yosemite and after many conversations with Apple Care, the solution was to remove the 3rd party RAM I had just installed prior to the upgrade. That solved the download/install problem, but now it's slow as anything. I opened my activity monitor and sure enough, the memory pressure is at full load so I have to install more memory. The trick is to make sure it's truly compatible.
Have you checked your activity monitor's memory report?

Processing is very slow after update

Hi team
My xperia T 2 ultra dual is becomes very slow and some time it's strucks.. I am sure after the latest update I am facing this issue.. Please help me out...

Reinstall the latest update with PCC PC Companion (PCC) Bridge (for Mac) Alternatives on How to backup Xperias http://talk.sonymobile.com/thread/36355

MSI GT60 Too much heat issue ! help

i have msi gt60 0nc (windows 8.1 x64 / i7-3610QM / gtx 670m / 16G ram / 1T hdd )
and when i play games the gpu and cpu temp retch 80c after less then one hour of gaming like need for speed rivals
and temp increases to reach more then that but i exit the game immediately to cool the gpu/cpu
my turbo and fan is on .. pls help me is that normal/safe or what ?
attaching some pic
thanks

Depending on what model of GT60 you have, 90C isn't terrible.
If you go much higher than 95C I would start worrying, but 90C seems to be about the normal operating temperature of a newer (Core i7 4xxx series + GTX8xx series combo) GT60. Once you start going above 95C you're going to start throttling very quickly.....and that's not good.
Worst case you might want to repaste the CPU and GPU. This is a rather common problem on the notebooks.

How much is too much heat?

I just got my Macbook last week and have seen the issues with the operating temps. I installed the CoreDuoTemp utility today and have noticed that my notebook is running around 122 degrees (F) while it is in use. Slighly lower when it is sitting idle. This is on a flat desk surface. I dont really hear my fan running at any time either. Should I be concerned with this level of heat or isit somewhat normal.?

I've heard these new MacBooks are getting pretty hot, though I don't know how normal that is. I used a Powerbook G4 titanium for years and it got pretty hot as well... don't know if the new MacBook's get just as hot or hotter since I haven't used one. On another note, seem even PC laptops get hot as well though, my ex had a Compaq laptop and that thing got hot enough to cook an egg on underneath. Sooo... I think for the most part, this scenerio is normal, especially with laptops...
And "ovenbook" ... like that term!

Secondary DPM (2012 R2) Issues: synchronising too much data from Primary DPM, persistant consistancy checks, and no dedup support!

I have a Primary DPM server that is protecting various File servers and a Exchange DAG. Everything is working as it should on this server, but I am experiencing constant issues on the secondary DPM protecting these same data sources.
On the primary, two Protection Groups in particular are set up to protect two different volumes on the same file server. Volume D:\ is 46TB in size, with a deduplicated file size of 22TB (actual 39TB) whilst Volume E:\ is 25 TB in size, with a deduplicated
file size of 2.5TB (actual 5.5TB).
Issue 1:
As expected Volume D: was initially replicated to the secondary DPM server at its undeduplicated size ( 39TB), as was Volume E:\ with initial replication to the secondary of 5.5 TB. So when is Microsoft going to support dedup on a secondary DPM ? It
seems daft to support dedup on the Primary DPM which is always more likely to be close to the original datasources on the LAN and not on the secondary DPM which is most likely to be placed offsite on a WAN !
Issue 2:
I have a big issue with the subsequent Synchronizations on the secondary server for E: which seems to transfer almost the full 5.5 TB every day ( I have it set to sync every 24hrs) - although the data is fairly static (i.e.unchanging) on that volume. On
one occasion a Sync continued for over 48 hours for this volume and had transferred over 20GB (according to the DPM console) , until I manually cancelled the job - how is that possible on a volume with only 5.5 TB (UN-deduplicated) ?? What is going on here
- has anyone any ideas?
Issue 3:
Another File server I am protecting on both the Primary & Secondary DPM server - always fails over to a consistency check on the secondary server - usually due to the fact it cannot access a particular file which results in an inconsistent replica .
However the Sync (and subsequent restore point) on the primary DPM server from the original datasource is always completes without any issues. Again, has anyone any clues ?
I do get the impression that the whole Secondary DPM thing is not quite robust enough. I can only assume that as the Primary seems to protect the original datasources ok, that the issue is with the secondary reading the information on the primary DPM.

I tried changing the time of the synchronization, but that didn't help.
Meanwhile, I was working on another unrelated case with Microsoft and so I didn't want to have a second case open at the same time. So I waited for some weeks with no change on this problem. Then, about a day or two before I was finally going to call Microsoft
to open a case (months after the problem had started), the problem suddenly resolved itself, with no input from me! So I don't really know if it was time that fixed it eventually or what. Sorry I can't be of more help.
Rob

Dv4 1241TX issue getting too much heated, processes are very slow

Similar Messages

Maybe you are looking for