Dv4-1551dx need wireless n card

where would i get a wireless n card for this laptop dv4-1551dx i see its an option. need a part# or a place to buy or both ty

Intel Wireless 5100 Wifi Link N mini PCI-E Half Height
Drivers for this Wifi Link 5100 Intel card are here:
http://support.dell.com/support/topics/global.aspx/support/downloads/en/downloads_splash?c=us&l=en&s...~mode=popup&file=268583

Similar Messages

Need Wireless lan card for L100-179

Hi guys can any one advise me where to buy a wireless lan card and any advise and installing one please

Hello
In my opinion the first step is your local dealer where you have bought the unit. This unit is not known to me but I presume unit is WLAN ready and upgrade with mini PCI WLAN card is possible.
Other way to find out which WLAN card is compatible with your unit is to contact service partner in your country.

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

I have a Power PC G4 which is running on OSX 10.5.8, it has the AirPort utility but cannot connect to the internet as my iMac can, I think I might need an AirPort Card? Is that the case or do I need something different to connect to a wireless modem?

Welcome!
Only one variant of the PowerMac G4 could use the faster Airport Extreme Card. The rest used the original Airport card that is pretty slow.
To get fast wireless without buying more than one thing, consider this:
http://eshop.macsales.com/item/Edimax/EW7722IN/
It goes in an available PCI slot
There are USB solutions also. However, all PowerMac G4 towers had only slower USB 1.1 ports, so any USB wireless adaptor can only run at about wireless 'B" speeds (slow) unless you also install a PCI USB 2.0 adaptor card. Doing that would allow a USB wireless adaptor to run at its maximum rated speed. These items working together would accomplish that:
USB wireless "dongle:"
Newer Technology MAXPower 802.11n/g/b USB Adapter + Plug and play direct or with extension cradle
USB PCI adaptor:
http://eshop.macsales.com/Search/Search.cfm?Ntk=Primary&Ns=P_Popularity%7c1&Ne=5 000&N=7069&Ntt=USB+PCI
Each approach has its advantages. The PCI wireless card is a one-piece solution that takes up no desk space. The USB2 card+USB2 Dongle gives you more fast ports for transferring date from other external USB devices (primarily cameras and external hard drives) at hugely faster rates than can the original ports. I have a USB 2 PCI card in my G4 tower strictly for transferring images from my digital SLR camera in a timely manner.

HT1551 I need to set up date and time on my apple tv.... Not doing it automatically ... I am connected to a router that works on a wireless sim card

I need to set up date and time on my apple tv.... Not doing it automatically ... I am connected to a router that works on a wireless sim card ...

OK.
Go into Settings on the Apple TV and then General-> Time Zone.
Turn OFF automatically and put your location in manually under Time Zone.

Does wireless pci card need antenna? - SP L10

Hi all,
I just installed a wireless pci card in my Sat Pro L10. No probems there, it found and installed it normally but I'm wondering if I need Antenna? I thought they would be already inside my unit but I couldn't see any. Please tell me if i need to purchase and connect these aswell.
Thanks

I have removed the cover and taken out the mini pci card. I've looked as far inside the unit as i can with a torch and I can't see any wires, cables ect anywhere? Do you have a direct Email addy or telephone number so I can contact Toshiba directly to find out if the L10 is normally fitted with antenna.
Thanks

Do I need an Airport card, too?

I have a flat panel iMac without an airport card connected to the internet via Ethernet with a 2Wire router. I have an iBook with an airport card.
So .... my iBook connects to my 2Wire network via airport, but I can't get on the Internet and even though file sharing is on on my iMac, I can't seem to access my iMac files.
Is this because I don't have an airport card in my iMac? I thought the wireless router would act as an airport card, but maybe I was wrong! If I do need an airport card for my iMac, where would I find one besides eBay?

Hi,
More things to help anybody else--what OS-X are you using, what version Flat Panel iMac, PPC or Intel, same with your iBook, my wife has a 2001 and they made them up untill recently.
You were right the first time, you won't see Airport because you don't have a card plugged in, the router is now your "Airport" card via ethernet. The computer doesn't see it so it won't bring it up. The same thing happened with my Blue Tooth. One less button to confuse me with i say.
Try looking at your TCP/IP settings on your iMac and see if their the same as your iBook. They should be identical except for the last 2 or 3 numbers at the end of the "IP Address:". Those are assigned by the router to each different computer. So depending on the router both computers should only be 1 or 2 of from each other.
You might try just making another Location and starting over and see what happens. Or if you have another Account boot into it and see if you are having the same problem.
At the very least Boot into your Startup Disk in "OS-10.xx whatever" and repair Permissions. You should boot into it before and after you update anyway.
One other thing, does your computer automatically log in or do you have to type in the passwords and network name because you might be logged into you neighbors network instead. I can go to a wireless motel or truck stop or rest area and there might be a half dozen networks showing and i can connect to half of them (no password needed) but i can't get on the internet.(password needed). Just a thought.
This is a very long shot but what the hey,
I've heard the last few updates in 10.4.x and 10.5.x have been giving every one fits so just for the heck of it, if your not using it as Admin, take a look in your "Accounts" under "Preferences" and click on" Parental Controls" and see if it defauted back. It's a shot in the dark but i've heard of odder things happening.
Good luck
Message was edited by: Jaygyver

USB wireless internet card

i was told i could connect my USB wireless internet card to my time capsule, i created the network and need help figuring out how to get internet with the USB card.

Welcome to the discussions, Diane!
i was told i could connect my USB wireless internet card to my time capsule
Unfortunately, you received incorrect information. The USB port on the Time Capsule will only support a printer and/or hard drive. Modems are not supported.
See this Apple Support Document for more details:
http://support.apple.com/kb/HT2421
Message was edited by: Bob Timmons

HT1349 I have a Power PC G5 mac. It's Dual 1.8 GHz and has 1 GB DDR SD Ram. This mac has no wireless Airport Card. Where do I get one to install in the computer so that it is able to pick up wifi signal and how much is the cost?

I have an older Power PC G5 desktop mac. It has 1GB DDR and SD Ram and Dual 1.8 GHz. The problem is there is no wifi signal. I think I need an airport card to insert in order for this model to pick up wifi. How do I know which airport card to use?

Your Power Mac G5 had an option to have an 802.11b/g AirPort Extreme Card. You basically have two choices: 1) Search the Internet for vendors that still provide this card, or 2) Get a wireless USB adapter that supports both 802.11b/g, but also the newer 802.11n standard. An example of this USB adapter can be found here.

PCI Card Slot - Wireless LAN Card Problems - Help!

Help.
I'm having problems getting my board to recognize both:
Linksys WMP11 Wireless LAN card; and
Netgear WG311T Wireless LAN card
(returned the Linksys card, but the Netgear card had the same problem).
Neither card is being picked up by Windows (XP Home), although both the "power" and "link" LED lights up when inserted. I've tried every PCI slot, same issue. Nothing shows up in the device manager, and no new hardware is detected. The Netgear software tells me that the card has not been installed.
Am left thinking I need to RMA the board. Any suggestions woudl be much appreciated.
K8N Neo Platinum
AMD 64 3200+
512mb OCZ 3200EL
Samsung 120mb SATA 7200rpm
Pioneer 108D DVD
Sapphire 9600xt

My roommate has a similar setup as you and I am having the same problem getting a pci wifi card to work in the machine. I have tried both a Linksys WMP54G and a Netgear WG311. Both cards will scan for networks bit will never connect my router (Linksys WRT54G). Just to get them to recognise the network, I have to turn off WEP, and turn on ESSID broadcast. Both of these cards work prefect in other computers. I know it not a signal problem because I can take my laptop and set it in the same location and it gets excellent signal.
I have tried changing slots in the machine, the wifi cards were the only PCI cards in the machine and an GeForce 6800 GT in the AGP slot. I have no idea what the problem could be. But I'm leaning towards the mobo at this point.

TS3308 is there any way to hook up a wireless air card that hooks up through a usb to a ipad

i have a ipad 2 and i want to hook up a wireless air card to it, is it possible do they make a cable for it

There used to be some wifi routers around with a USB port made just for these USB wireless sticks to create a personal hotspot. I don't think they really caught on since they are pretty tough to find by searching the net. I believe they need to be made specifically for this function, routers with USB ports for printers and hard drives do not work. Your other option is to plug it into a computer and create an "ad-hoc" wifi network with the computer.

Wireless internet card for powerbook 1400

Can anyone recommend a wireless PC card for the Powerbook 1400? (I know...an anchient machine but I want to throw it in the kitchen for looking up recipes and other light futy stuff.) I think it needs to be a PCMCIA card or something like that. Thanks.

Richard,
You can run an 802.11b 11Mbps PC card on the 1400 with the correct wireless drivers and this is dependent on which version OS you have installed on the 1400. The card you want is the WaveLAN or Orinoco wireless PC card. And if your 1400 were running OS 9.1, you could use Apple's AirPort 1.2 software.
Here is a more extensive guide to your wireless setup:
http://www.penmachine.com/techie/airport1400.html

My Wireless PCI card 2.4GHz (Desk Top No Lap Top) is in m...

My Wireless PCI card 2.4GHz (Desk Top No Lap Top) is in my computer in my room and my Dad has the router in his room. Hes connected but the wireless PCI card in my room says im connected to his router but i can't get on the internet?? i tryed the following.
1.Entering the IP address that listed on my computer (when i click the connection that says im connected and click the tab at the top to the right and press details and i put the Subnet Mask and IP adress in the spots avalible when i put up the linksys screen this when i did this it showed the connection working at the bottom right on my screen the little green connection on the computer but still can get on the internet, Befor i did all that i left all that blank and it said Limited or no connectivity)
2.My Dad put his IP adress in insted of the on on my computer but he left the DNS and Defalt Gateway Blank (Possible Problem let me know?)So is showed the connection at the bottom of my screen but still not internet. So my dad made a new connection called (Linksys) and had no Security on it and we connected to it but Guess what...No Internet
3.My dad's other connection Henry1 has security and in the phrase box i enter his Pharse number and it connected everything was looking good i clicked up the internet, at the bottom left on the internet screen said Detecting Proxy sever loaded a bit got me excited the BOOM!! No connection
4.I pressed START-RUN-typed CMD at command prompt typed ipconfig/all
this showed my IP and Subnet mask put those in for that in the linsys box provided Note: in the linksys PCI confige there are several options i have no idea on what to put there like the DNS and Defalt Gateway Subnet mask or IP adress Plesea tell me what to put here.
Please excuse my Spelling and typo's im sure there are plenty but im at the library and i gotta work fast.
and Please list all possible problems Note: i have no way of seeing my dads computer so im just guessing by what's on my computer so tell me what my dad might have done wrong also.
(Mod Note: Removed Email address.)
Message Edited by daikunzeon on 09-14-2007 07:12 AM

Okay... first off let me know which operating system are you using and model and version no. of the adapter?? if you are using Win XP system try uninstalling the adapter from the computer...click on start >> programs >> wireless G PCI adapter >> uninstall, put the CD in for the adapter and restart the computer, one window pops up "found new hardware" try installing the drivers, no need to install WLAN software or utility and use windows WZC (wireless zero configuration) to manage wireless connection...check whether it works for you or not and let me know.

Getting Wireless PCMCIA card to work

Attempting to get a Linksys wpc54G wireless PCMCIA card to work on my 1.5Ghz G4 PB.
I verified that the card works, by plugging it into to a PC.. ( works fine)
Plugging the card into my pcmcia slot, on nothing. No lights.. nothing.
I get the PCMCIA icon on the menu bar, three options
unknown vendor <-grayed out
Network controller <-grayed out
Power card off.
I read where there might be some hack that I have to do to get PCMCIA support running, but no clues after that.
Any help is greatly appreciated...
Larry

Hi,
When I got my PCMCIA wireless card (not Linksys) it came with an install CD. The G4 maybe wouldn't of known what it was or what to do with it on it's own, needed the install feature.
Works fine once installed. Did you get an install CD for it from Linksys? For the Mac OSX? If not, it might pay to check their web-site for one.

How could the wireless ethernet card running automatic when system reboot?

I have already setup the wireless networking card correctly which name is wpi0,but every time when I use it to link to internet,
I had to key the instuction like this :
ifconfig wpi0 plumb
ifconfig wpi0 up
ifconfig wpi0 dhcp
and then input:
wificonfig -i wpi0 connect mywifi
comment: mywifi is the profile file of connection to my wireless router
I had set it with the instruction before like thisi
wificonfig createprofile mywifi essid=2WIRE678 encryption=wep wepkey1=1234567890
anybody can help me group up the command line and has it running automatic when system reboot
it seems the wireless card always need manual connect to router, that 's trouble.

It should connect on it's own. Which version of Solaris are you using?
If worse comes to worse just drop all of your commands into a simple script and then run that script as part of your .profile or equivalent.
alan

I need a sim card for my iPhone 5 from sprint but they won't give me one,I really need one

I need a sim card for my iPhone 5,I already talked to a sprint representing they said they won't give me one and I wonder if apple would,I really need one

Apple does not give out sims - only wireless carriers do.
Go to a different Sprint location and ask for a sim. If you
have an active account, they have to give you a sim. If you
do not have an active account, what do you want the sim for?

Dv4-1551dx need wireless n card

Similar Messages

Maybe you are looking for