Dv4-2049us numlock caplock blinks once every 2 seconds continuous, hard reset no help

Was running fine power off then tried to power back on 1 hour later no display numlock and capslock blinks continuous once every two seconds, does this indicate a CPU or bad battery?

As per Blank Screen LED error code, it indicates CPU or motherboard itself has gone faulty. You can find more info at below link
https://h10025.www1.hp.com/ewfrf/wc/document?docname=c01443366&tmp_track_link=ot_recdoc/c01442956/en...
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Similar Messages

String of bad luck, caps lock is flashing once every few seconds

So lets start off with the beginning of the bad luck, first i was watching a youtube video and deicided to go make a snack b/c i was hungry, when i came back my compuuter had shut itself off, overheating wasnt uncommon so i checked the how hot the computer was over the processor and it was coo and not hot at all, so i turned it back on, and i didnt get a thermal shutdown message, so i was a little confused and started checking for the error, the first thing was the power, in which it said "9% availiable(plugged in, not charging)" so i first made sure it was plugged in and everything a bit confused, still did it, and then i googled it, and apparently i had to uninstall the apci from device manager, so i did the ~11 step solution that had helpe so many people, and then it still was like that, so then i used the HP assistant to check my battery, and i needed to replace it, but on the way i noticed i had "system updates" and such i was bummed i had to get a new battery(To put it simply, im poor) and decided to update my system at the very least, maybe the HP assistant was wrong and after the update the battery would register as good again, with little hopes on that(i knew that the chance was near 0%) i updated, and one of the updates were BIOS updates, so half way through downloading my sister decided to power-cycle our router, as our router is a pretty bad router and every now and then our internet would slow to the point of pretty much being non-existant, so then my computer resets i get a black screen and capslock starts blinking twice, i use my issters computer to google it, my BIOS is corrupt, so i use windows + b + the power button, to try and restore my BIOS, during it flushing my computer overheats, and now when i turn it on its a black screen with the capslock blinking once every few seconds, i havnt been able to find a fix, can anyone help me? also i should mention the tag on my HP is worn out pretty bad i can barely salvage any info off it which is pretty bad, all i know is that its an hp pavilion G4 with AMD radeon GPHX, and 8mb of memory

Hi ,
Welcome to the HP Forums! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. Thank you for posting. I have read your post, and I understand that you had experienced a series of issues, and now your laptop cannot start. Below is a link could help you to diagnose the problem of your laptopHP Notebook PCs - Computer Does not Start (Windows 7, Vista, XP) If the laptop could back to start, you could use this link to reload the BIOS. If you find out it is a hardware issue, please use the following link http://www.hp.com/contacthp to create a case for your issue, and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region.http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Let me know if you need any other assistance. Good luck,

I just bought 8gb of ram and after installing it and powering back on my mac mini it beeps once every few seconds how can I fix this

How do I fix this problem, I have a mid 2010 mac mini. I put in both of my 4gb sticks of ram and when I power it on it beeps once every few seconds. The firmware is up to date, so what else could it be, cause this system is suppose to suppore 8gb of ram? please help and thanks

What RAM....?
Three months ago I upgraded my 2010 to 8GB with Crucial RAM, I never had a single beep and everything is hunky-dory.
Computer memory upgrades for Apple Mac mini (Intel Core 2 Duo 2.4GHz) DDR3 - Mid 2010 Desktop/PC from Crucial.com
Also check out OWC.
Apple Mac mini Memory DDR3 / Ram upgrades for 2009 Mac mini & 2010 Mac mini unibody models

Any program in finder blinks off every 5 seconds I have to hit the program to activate

Ihave an issue in finder any program I have open wil blink off every 5 seconds I will have to hit the openprogam to activate 5 seconds later it blinks off anyone have this issue? using OS9.2 Mavericks. Thanks Harold

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents—again, the text, not a screenshot. I know the report is long. Please post all of it anyway.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Mac Mini won't boot up, just beeps once every 4 seconds. Is it dead?

Mac Mini died, now it won't boot up. It just sits and beeps at me once every four seconds with the power light flashing once every four seconds also. If i shut it off, can't get it to turn on again without unplugging it. also, no boot sound. Time for a new one?

Sounds like a RAM problem:
1 tone, repeating every 5 seconds: This indicates no RAM is installed.
Try reseat8ng the RAM. Finde you Mac here for how to access the RAM
Or you can
Make an appointment at the Genius Bar of an Apple store. No warranty required
Apple Retail Store - Genius Bar

My iphone 5 gps is bad. It follows me about once every 20 seconds.

I have had 3gs, 4 and wife has 4s. They all followed me perfectly in the car.
The iphone 5 I have strays off the road and picks up my position about once every 20 seconds.
I have reset the phone as new phone, reset location settings, rebooted, to no avail.
Navigon 'always' wants to simulate my route.
Phone shows me about 1 block from house even outside in the open.
I held my wifes 4s AND my phone in each hand, and ran an app called 'GPS Status'.
She shows status as 'excellent fix', even in the house. Mine shows Bad Fix, and Poor fix.
I would say the gps radio in the unit is bad, or not working correctly.
I have an appt with the Genius bar near my work Tues 9/25. I hope they can exchange this for a
NEW phone (dont see how there would be any refurbs yet).
I am still within the 30 day exchange/return, as I just got it Friday 9/21.
If I have any problems with the exchange as this is hard to test inside a store, they just have
to take my word on this. I can always return it and buy it when the phone is available again
I suppose if you have to return an item you will get your UPGRADE (199$) back to purchase
another or this same phone in the future as you shouldnt have to use up your upgrade price if the item
is returned..
chris

fixed. exchanged in apple store. works perfectly on new one now. oddly enuf old 5 had the 2 tiny torque screws missing on the bottom. Anyone else had this happen ?

Front LED Light Flash Once Every 3 Seconds

As what I read from the previous post, the front LED light flash once every 3 seconds meant that rams were not installed. However, I can turn on the G5 (Tower) couple days ago. After I came back from vacation, it did not allow me to turn it on. In addition, I have already tried to reseat the ram, and it did not work. Any suggestion to fix this problem?

Hi Teddy, and a warm welcome to the forums!
After I came back from vacation, it did not allow me to turn it on.
If it was unplugged from the AC that could drain the PRAM Battery, 4 years is close to their lifespan...
See which one your G5 has...
http://eshop.macsales.com/item/Newer%20Technology/CR2032/
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/

6300 Blinking Screen every 6 seconds after LCD rep...

The screen was broke on my Nokia 6300, I've replaced teh screen, it comes on fine, then it goes completely black, it keeps going black around every 6 seconds, the phone doesnt restart and functions normally but the screen keeps blinking, does anybody know how i can solve this problem? do you think it could be the new screen? or a software problem, i was advies to format but have to go repair centre for tahta nd it may not solve teh problem, please let me know
Peter

We can't discuss disassembly and reassembly of phones here, any issue of faulty or broken hardware must be referred to a Nokia service point because only they are authorised to make such repairs.

Black screan and caplock blinking repeatly after 5 seconds

My hp 250 have 1 year old. I was playing a game and my laptop shutdown, when I switch it on capslock blinks repeatly after 5 second and it makes black screan PLEASE HELP ME!!!!!!

Hello ,
Thank you for visiting the HP Support Forums and Welcome. To get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at Commercial Forums.
Even though this is a Commercial product, try performing a hard reset.
When performing a hard reset please note remove any and all USB devices. Disconnect all non-essential devices.
Here is a link to computer won't start for Windows 8. Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue. Thanks.

My friend dropped my MacBook and when I tried to start it....it beeps once every five seconds!!

I have a MacBook Alluminium unibody (late 2008) which my friend dropped on the floor on its side where cd rom is situated. It has created a dent over there. And now whenever I try to switch it on it would make a single beep every 5 seconds. I'm scared, is it regarding the motherboard or the ram and how much would it cost me to fix it....please help...!!!

Possibly one of your ram chips has been damaged or knocked loose. Remove the ram cover on the bottom and remove both chips. Insert one chip and try to start. If it works, try adding the second chip, if not, remove the first and try he second one.

Apple Logo flashes every 5 seconds continuously

I removed my iPOD from the computer without first "ejecting" it and when I tried to turn it on the next morning, the screen showed the Do Not Disconnect symbol and Disc Mode. I was able to put it back on the computer and then ejected it properly and get the "Check Mark" to appear, but when I went to reset it, the apple logo appears on and off every 5 seconds and I cannot get it to stop. Any suggestions?

Hi enbridge4,
If your iPod Classic won't charge or turn on, you may find the following articles helpful:
Apple Support: iPod won't turn on
http://support.apple.com/kb/ts1383
Apple Support: iPod's battery doesn't charge
http://support.apple.com/kb/ta44551
Regards,
- Brenden

My Curve 9220 has a black screen and the LED light blinks red every 5 seconds

The phone won't come on and the light blinks red. I dont know what to do

Hi there,
If you have a good battery or the batttery is good enough then try those steps , it may help :
( Credit JSanders )
1) Make sure you have Blackberry Desktop Manager installed. BlackBerry desktop software
2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
"c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
3) The Application Loader Wizard will appear -- click "Next."
4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device. BlackBerry Software Download Site
Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
Good luck.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Feedback : Not allowed to post messages more than once every 30 seconds.

Well, is this a new limit or just the first time I reach it today?
It is good to prevent an user from opening multiple new threads per minute, but why restricting experts from answering?
Cheers,
Laurent

Sandeep was that guy from last year. He posted a TON of replies that were just cut and pasted from other replies (presumably to get his post count up). He did this in just a few hours.
He also called me a very bad name in a foreign language.
He doesn't post anymore though. Too bad, it was kind of entertaining.

All google email sites reload every 7 seconds continuously. google does not have or won't tell an answer. Yahoo email does not do it. This problem just started without any computer changes.

If I can open five or six letters, sometimes the problem eases off after 20 minutes or so.

I would suggest running the network via a pc for the day.. pick either your Mac or win7 pc.. you will need to do a bit of fiddling.. even better would be to just borrow a router. Or buy one on a 7day return .. !! Beg borrow.. don't steal. Just get a router other than TC. it won't take long to determine if the TC is the issue.
IMO at 18months you are suffering failure of the TC power supply. early days but it is showing signs of delinquency. And will get worse. But another router will show it up.. if the PC has dual ethernet cards you can run ICS.. or same sort of thing on the imac to the wireless .. ie the PC or Mac becomes the router with direct connection to the cable modem. Then share internet from there.
Once you do that for a day or two, you will quickly be able to track down if the issue is cable service/modem or the TC as router.

Why does my iPhone need every time to be hard-reset after charging?

Every time I fully charge my iPhone 6 Plus it turns off and doesn't want to turn on normally: I have to reset it every time by pressing the Home button and the Sleep/Wake button for a couple of seconds.
Also, sometimes after leaving it in sleep mode, when I wake the iPhone I find it having restarted alone without me doing anything: it asks me to type again the PIN number of my SIM card, as if it had just been turned on.
What can I do?
is it a battery or a iOs issue?

I think you need to talk to App tech. If you were sent a forced upgrade, it forces the phone to reboot when it hits 100% charge. Problem is after update and/or restore, it continues to do the reboot after you hit 100% battery capacity.
I have 6 phones that do the same. The tech guys don't believe me or they do not want to admit they have a problem with the forced update.
It left me stranded without my phone and the data in it while I was away. Bought a android phone for a back-up but may keep it as a main.
It seems if you want to carry your phone now-a-days, you better carry a laptop with iTunes in case there is a issue.
This whole thing is getting out-of-control as I spend more time servicing my phone than it spends servicing me. Which was the reason for not connecting to iTunes and updating it and then my phone every other month. So what do I get, forced update and inoperable phones.
If you can get it connected and set again, don't let it charge to 100% again and it will be fine. Otherwise see apple.
Who owns these phones anyway? It certainly is not me.

Dv4-2049us numlock caplock blinks once every 2 seconds continuous​, hard reset no help

Similar Messages

Maybe you are looking for

Dv4-2049us numlock caplock blinks once every 2 seconds continuous, hard reset no help