Dv6-1030us Webcam Problem

I have a dv6-1030us computer and it seems since I installed Vista Service Pack 2 the built in webcam works intermittently.  (I noticed the problem too long after I installed SP2, so I have no easy route back to SP1) Most of the time it simply doesn't work; when you open the HP MediaSmart webcam program, your hear the sound of a usb device unplugging and get an alert that the "Connection to the video device was lost".  If you check device manager the webcam still shows up as there and I don't see anything else missing.   
Occasionally  - and I have not been able to reproduce a chain of actions that are repeatable to help solve the problem - the camera does work.  Probably less than 5% of the time.  I have called customer service and they said other people are reporting a similar problem, but I have yet to see anyone post.  I am wondering if I simply have a hardware failure with the camera.  I have updated all drivers and have the latest bios version f.24.  Any suggestions?

I've had this laptop for two years without a webcam problem. Upgraded from Vista to Windows 7. My webcam stopped working. If I go into HP MediaSmart Webcam it shows an image for a few seconds and then it loses its connection. I can't get it to work in the latest version of Skype anymore. It's not even an option to choose from. The only option is a Cyberlink webcam filter that I've never noticed as an option before.  Any suggestions?

Similar Messages

  • HP dv6-1030us webcam now dead after almost 5 years of laptop usage

    I have HP Pavilion dv6-1030us Entertainment PC currently in Windows 8.1. I upgraded it's notebook factory OS (Vista) for almost 4 times now since I got this 5 years ago. I never had issues in webcam drivers everytime I switch from another Os to another (even the beta ones) until now. There is no any imaging devices installed in Device Manager. Also there is no webcam to be selected in Skype's option. Even in Windows 8 webcam app.  I had some issues on the camera before it's totally dead now. Captured video is blinking, webcam will be automatically turned off then I'll on it again (on Skype calls which the webcam is I mainly use) And since there no webcam driver on my product support page http://h10025.www1.hp.com/ewfrf/wc/softwareCategoryos=4063&lc=en&cc=us&dlc=en&sw_lang=&product=38605...  (expect for the MediaSmart Webcam Software) I know this is no problem in my webcam driver. I red some few forum post about the same issue and some says it's Bad wiring or something since the notebook probably 5 years old now. Obviously my warranty is already ended so all I got is a help here in forums. Please if someone knows wehre to download the fricking driver, please told me where. I need help ASAP
    PS: Also the AC port is already loosed so sometimes power fails (plugged in, no battery) and notebook will be accidentally offed . If this issue may contribute (theoretically) to webcam's hardware status now, please told me so
    PPS: Sorry for bad English

    Hi @PrinceKickster ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue of updating your HP Pavilion dv6-1030us Notebook and the Webcam not being seen in Imaging devices. Here is a document on fixing a Webcam after changing the OS. Here is a link to the Cyberlink Youcam software for Windows 8.
    You should be able to click the action button and scan for new hardware  in your device manager.
    Have you taken apart the Notebook at all?
    Hope this helps you.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Dv6 integrated webcam problems

    Anyone else out there with this type of HP integrated webcam that experiences a green screen with black flashes? Sometimes it just won't show an image - I am speaking of both Skype and HP Mediasmart applications.

    Hi squarecnix, and welcome to the Lenovo User Community!
    Call Lenovo 1-800-426-7378  tomorrow.
    This is a user-to-user help community, moderated by volunteers like me. Although employees do fly by from time to time, it is not a monitored Lenovo support channel.
    I don't work for Lenovo. I'm a crazy volunteer!

  • Webcam problem pavilion dv6

    this is pavilion dv6. my webcam  doesn't start manually or automayically on internet. cyberlink webcam has been installed as the software. what do i do?

    Hi @Madwho,
    Welcome to the HP Support Forum!
    I understand that you are having webcam problems. I am happy to help you, but it would be best to get the full product number and OS version. Please read the following documents if you need help in finding those.
    How Do I Find My Model Number or Product Number?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    See the following pages I have found that should assist you with this problem. I am including some pages on several possible problems to try to cover most of the bases as I do not know your OS and full computer. Hopefully one of these shots will hit the basket.
    Webcam Troubleshooting (Windows 8)
    Webcam Troubleshooting (Windows 7)
    Fixing Webcam After Changing the Operating System
    Webcam Drivers
    YouCam Quick Setup
    Using CyberLink YouCam to Capture Videos and Pictures, using the Webcam (Windows 8)
    Testing a Webcam Using YouCam
    Please let me know if this helped at all or if you need more. If you do please post any results or error messages you had, plus the product number and OS versions as I mentioned in the beginning.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • Hp pavilion dv6-1030us with windows vista 64 bit now upgraded to windows7 32 bit.

    hp pavilion dv6-1030us originally with windows vista 64 bit now upgraded to windows7 32 bit. mic is unable to send sound in skype after upgradation.
    This question was solved.
    View Solution.

    Hi,
    Try the following.
    First, uninstall Skype and when this has completed, restart the notebook.
    When windows has reloaded, download and reinstall the Chipset driver Here.
    When the installation has finished, restart the notebook again.
    Let windows fully load, then download the IDT Audio installer on the link below and save it to your Downloads folder.
    http://ftp.hp.com/pub/softpaq/sp45001-45500/sp45044.exe
    When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers.  Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
    When complete, shut down the notebook, unplug the AC Adapter and then remove the battery.  Hold  down the Power button for 30 seconds.  Re-insert the battery, plug in the AC Adapter and start the notebook.
    Let Windows fully load, then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation.  When this has completed, restart the notebook again.
    Reinstall Skype and see if the Mic now works Ok.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP pavilion DV6 1030us shutdown and reboot spontaneously

    I bought a HP pavilion DV6 1030us in June 2009, and the Bios was updated to the latest version F24A.
    However, during the notebook running, it will sunddenly shutdown and restart again.
    Such unexpected shutdown just looks like loss of power suddenly, and happens randomly, at least I can not find a rule.
    For most cases, such shutdown comes  without blue screen, and it is operating system- independant.  I tried to install windows 7 64bit, windows 7 32bit, vista 64 bit, xp 32bit, all OS has such problem.
    I dont know whether other users with this model has such problem. I tired everything I can do, still can not solve the problem.
    I suspect the Bios has some problem. I hope HP will release a new one quite soon.
    btw, if I update the BIOS, will it erase the old BIOS completely first, then write into the new one?
    Thanks for all your attention!
    This question was solved.
    View Solution.

    Same issue here

  • Need help: Flex  record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness

    Hello, dear all
    Please help me!
    Flex  record webcam problem, how to setting Brightness,Contrast,Saturation and Sharpness?
    nsOutGoing=new NetStream(nc);
    nsOutGoing.attachCamera(m_camera);
    nsOutGoing.publish(filename, "record");
    I want to control the Brightness,Contrast,Saturation and Sharpness for the recorded flv file.
    At present, I only can control the videodisplay object, but I can not able to control Camera.
    Thanks very much!!
    kimi
    MSN: [email protected]

    Can I change a Video object to to Camera object, If yes, How do??
    nsOutGoing.attachCamera(video as Camera);// it does not work rightly
    thanks

  • Hp notebook G62-b25SA Webcam problem.

    G62-b25SA
    XR524EA#ABU
    Windows 7, 64 bit.
    I have never been able to use my built-in webcam.  I have installed the latest Youcam drivers and still an error message - "No webcam detected, if you are using an integrated camera make sure that it is turned on".
    I have also followed instructions on this website - I have gone to Device manager and "scan for hardware changes" but I never get an icon for "imaging" hardware.
    I know the computer has the hardware as my parents have an IDENTICAL computer - bought from the same shop at the same time!
    Please help!

    Hi
    You have a couple of options as I see it please try these steps might help you to fix the issue.
    Fixing Webcam Problems in Windows
    Testing a Webcam With MediaSmart in Windows
    If both these links does not work then you might have to call HP Techincal support and get the part replaced.
    If your notebook is still under warranty, contact HP and arrange to have the drive replaced.
    If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know.
    Let us know how it goes!
    *Although I am an HP employee, I am speaking for myself and not for HP.
    ****Click the White Kudos star to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Problem in Pavilion dv6-6050se webcam

    can't start integrated webcam of my computer and when start cyberlink youcam give me next message " Warning no webcam detected. try pluging in a webcam into your computer now . if you are using an itegrated camera make sure that it is turned on." how i can turn on my webcam . Please need help and i recover my system but nothing do

    my friend i have the same problem with you
    i bought the laptop just 2 weeks ago but only tonight tryed to use webcam but nothing
    from what i have seen many people face the same problem
    i feel stupid b/c i was b/w 2 laptops 1 hp dv6 and sony vaio and i choosed this one
    {Content Removed: Language Filter Evasion}
    ... i will try to return it back

  • DV6-1375dx Webcam not found

    This laptop is running Windows 7 64-bit, and I cannot get the device manager to find the webcam. I have tried to manually add the device drivers and updated the BIOS. I have also tried to manaully add the device throught the "Imaging" category within the Device Manager Add Legacy Hardware wizard.
    Any Ideas on where to go from here, other than buying an external WebCam?
    Pertinent System Information:
    OS Name Microsoft Windows 7 Professional
    Version 6.1.7600 Build 7600
    System Manufacturer Hewlett-Packard
    System Model HP Pavilion dv6 Notebook PC
    System Type x64-based PC
    Processor Intel(R) Core(TM)2 Duo CPU     P7450  @ 2.13GHz, 2133 Mhz, 2 Core(s), 2 Logical Processor(s)
    BIOS Version/Date Hewlett-Packard F.42, 3/23/2010
    SMBIOS Version 2.6
    Installed Physical Memory (RAM) 6.00 GB
    Total Physical Memory 5.91 GB
    Available Physical Memory 4.18 GB
    Total Virtual Memory 11.8 GB
    Available Virtual Memory 9.89 GB
    Page File Space 5.91 GB
    Page File C:\pagefile.sys

    Hi ESiniard,
    I realize this thread is over 12 months old. But I just encountered the same problem with my DV6 1375. The webcam stopped working, and it doesn't show up in Device Manager Imaging.
    I've installed the new BIOS and chipset drivers, but the webcam is still not found.
    Thank you for any help!

  • Lenovo usb webcam problem

    I have a Lenovo usb webcam.  I believe all was fine out of the box until I started also using Logitech usb headset.  Now not working with or without headset.  No idea why headset would matter, but that's the only relevant event I can think of.
    dmesg | tail
    yields
    usb 1-1: new high speed USB device using ehci_hcd and address 4
    usb 1-1: configuration #1 chosen from 1 choice
    gspca: probing 17ef:4802
    vc032x: check sensor header 20
    vc032x: Sensor ID 143a (3)
    vc032x: Find Sensor MI1310_SOC
    gspca: probe ok
    gspca: probing 17ef:4802
    And
    cat /dev/video0
    cat: /dev/video0: Input/output error
    And
    mplayer tv:// -tv driver=v4l2:width=640:height=480:device=/dev/video0 -fps 15 -vf screenshot
    MPlayer SVN-r29411-4.4.0 (C) 2000-2009 MPlayer Team
    137 audio & 299 video codecs
    mplayer: could not connect to socket
    mplayer: No such file or directory
    Failed to open LIRC support. You will not be able to use your remote control.
    Playing tv://.
    TV file format detected.
    Selected driver: v4l2
    name: Video 4 Linux 2 input
    author: Martin Olschewski <[email protected]>
    comment: first try, more to come ;-)
    Selected device: Lenovo USB Webcam
    Capabilites: video capture read/write streaming
    supported norms:
    inputs: 0 = vc032x;
    Current input: 0
    Current format: unknown (0x4745504a)
    tv.c: norm_from_string(pal): Bogus norm parameter, setting default.
    v4l2: ioctl enum norm failed: Invalid argument
    Error: Cannot set norm!
    Skype, for example, knows that I have a lenovo usb webcam in preferences but can't test the webcam.
    This problem is robust to reinstalling the system.

    Hello davidoff!
    Did you read this ?
    http://wiki.archlinux.org/index.php/Webcam_Setup

  • Lenovo 3000 N200 0769-K2G webcam problem

    Hi All,
    I bought this machine a while back with Vista OS. Downgraded to XP and my problems began. Couldn't find webcam driver so went back to Vista Business and still cant seem to work out the issue. In device manager I've got Intel (R) ICH8 Family USB Universal Host Controller  2830, 2831, 2932, 2834, 2835, 2836 and 283A in addition to 7 USB Root Hub (if that info helps).
    someone suggested using Yawcam, tried that but no luck. There is no webcam driver on lenovo website which is strange. Please help.
    SH

    there should be a key to activate the camera. ( fn + something )
    check your manual or take a look at the f keys for camera icon.

  • S-10 Webcam Problem

    I have googled and searched the whole forum before posting this, but I haven't found any solution to my problem
    My problem is simple but irritating, my webcam haven't been recognized by windows 7,  as it shows as "Unknown Device" under device manager
    I have tried updating the driver, installing the bison camera of the other s10 model (don't recall the specific model), uninstalling the driver then restarting .... No luck, windows 7 still notifies me as there is an unrecognized USB device
    The following info is in the driver status: Windows has stopped this device because it has reported problems. (Code 43)
    can anyone help me please ?

    tried that, no luck

  • Labview webcam Problem

    Could anyone help me, please?
    I've download LabVIEW webcam library from Peter Parente'Homepage
    http://www.cs.unc.edu/~parente/labview/webcam1.4.zip
    I use my webcam to capture indicator display screen but the charactor that i get is reverse (like look in the mirror)
    Could anyone suggest me how to solve this problem? Is there any VI to flip the image and can use with Peter's Libray? I use LabVIEW 6i,sir
    Thank you very much
    Attachments:
    display_capture.JPG ‏9 KB

    Hi Prart
    1.- If you have IMAQ vision 7.1, download USB IMAQ driver fron this web and will have no such problems.
    2.- If not, convert your image to a 2D array an see attached picture about how to revert image.If it does not run for you, try transpose 2d arrrays.
    Hope it helps
    Cheers
    Alipio
    "Qod natura non dat, Salmantica non praestat"
    Attachments:
    mirror.jpg ‏20 KB

  • L655-S5096 Webcam Problem

    Hello,
    I own a Toshiba L655-S5096 (It has a chicony USB 2.0 built-in webcam).
    I hadn't used it for quite a while after I purchased it in 2010.
    Recently I tried using skype on my laptop, but it said that it couldn't detect any webcam.
    I thought maybe the drivers have been obsolete or removed by mistake due to whatever reason, so I tried installing a fresh version of Windows 7 Home Premium SP1 (downloaded from microsoft website / geniune), and then different version of the Toshiba Web Camera Application (V2.0.3.37 and v1.1.1.15), as I found them in support.toshiba.com.
    The problem is that first I was able to install it, and with the application, the webcam worked showing my picture and the blue light on the webcam was on too.
    However, then I thought I can use it in skype, so what I did was I installed skype (latest version, and in the mean time windows did some automatic updates), and once I opened skype and I tried to make a video call, the webcam just stopped working and there was a noise as if you plug out a usb device.
    From this moment onwards, whenever I try to use the webcam (I tried reinstalling the driver / removing skype / etc.) I just hear USB plug in noise and then the blue webcam LED blinks really fast and I hear the USB plug out sound.
    I have tried everything I could, so I would be really appreciated if you guys can provide me with some information.

    Hi ! Sense no one is repling, I'll offer my advice. Others my reply with better advice latter!
    "I thought maybe the drivers have been obsolete or removed by mistake due to whatever reason, so I tried installing a fresh version of Windows 7 Home Premium SP1 (downloaded from microsoft website / geniune)"
    Why would you do some thing like the above to preform a clean install when Toshiba offers you two options to restore back to out of the box(factory). I suggest you restore back to factory. You can get the recovery media here. I suggest the USB
    Dokie!!
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Maybe you are looking for

  • How can you deny bash system access when sourcing a file?

    I'm having another one of my "Linux noob" moments. This is probably easy to answer for the experienced bashers here. I need a bash function to extract data from a PKGBUILD for use in other scripts. I want to write it in such a way that there is no si

  • AP not joining WLC via l3 network DTLS problem

    Dear All, i have a problem which is annoying me so bad! I have the scenario you can see in the attached file. The problem i have is that during the CAPWAP registration the public AP contact as I expect (option 43 dhcp) via the public interface 1.1.1.

  • Special user access for a search committee on recruitment

    Hello, We are new to the system and are working on implementing our process within the system prior to going live. In the system we currently use we have the ability to have our search committee have a guest user access which allows them to view requ

  • Webutil&forms11g R2 64bit

    hi i installed form&report 11g R2 on win 2008 64 R2 After install ,i download jacob and sign jar file with webutil signer and copy in java directory then run webutil_demo.fmx without error but sometime i get this error: RegisterWebUtil - Loading WebU

  • BSP Examples

    Hi BSP Experts, I need some BSP Examples to practice. Can you please let me know where can I find out or please mail me to my id [email protected] Thanks, Vinay.