Dv6-1214ax CPU original part or upgrade wanted

Can anybody help with a new or upgrade CPU for a dv6-1214-001

What is the installed CPU?
Use the BIOS system information section to see what is installed or run CPU-z.
The following image shows the CPUs supported by your notebook BIOS and hardware. reference source. Paviliion dv6 Maintenence & Service Guide
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • DV6-1390 CPU upgrade

    Hello,
    I want to upgrade my dv6-1390 CPU (Intel Core 2 Duo 2.66) to i7. Is this possible?

    Thank you for this 
    but shall I pay attention to other things such as software or hardware compatibility?

  • What is the cpu fan part no for dv6 2060ea

    what is the cpu fan part no for dv6 2060ea

    Hi
    Please find the web link given below check the part number under page 4-39 Removal and replacement procedures will let you know how to replace the part and the part number as well.
    http://h10032.www1.hp.com/ctg/Manual/c01860375.pdf
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • DV6-1214AX

    Hi,
    I just wanted to ask if I could change my Graph, Process and Ram pplus Hardrive 
    in my old dv6-1214ax and if I could what are the supported processors and graphics cards 
    Specs :
    Processor - AMD X2 (2.2GHz)
    Display - 15.6"  
    Memory - 4GB-RAM
    Storage - 500GB
    Graphics Card - ATI Radeon™ HD 4650 Graphics with 1GB of dedicated video memory
    Thanks!

    AMD ZM-87 is the top processor at 2.4 ghz. Here is the Service manual:
    Manual
    You already have the motherboard for that series with the best video chip. There is no video "card" as you might be imagining. It is just a flat motherboard with chips soldered on including the video; no upgrade, sorry.
    It maxes at 8 gigs of RAM and uses DDR2-800 aka PC2-6400 SO-DIMM memory or 2 x 4 gig chips.
    On the hard drive you could install anything up to a 2TB SATA 9.5 mm thick 2.5 inch wide hard drive for max capacity size and if you want speed it would accept a 2.5 inch SATA Solid State Drive (SSD). Post back if you need buying help for any of this.
    if this is "the Answer" please click "Accept as Solution" to help others find it.

  • Does the 2012 Mac Pro have 2 CPU socket always? If I buy one CPU setup, can I upgrade it later to 2 CPU?

    Does the 2012 Mac Pro have 2 CPU socket always? If I buy one CPU setup, can I upgrade it later to 2 CPU?

    If money is no object, OWC will swap 2010 or 2012 Processor shelves for whatever you want as long as you have a working Mac Pro 5,1 shelf to swap and a ton of money.
    http://eshop.macsales.com/shop/turnkey/MacPro/2010_Xeon_Processor
    The basic charge is US$949 starting from the 2.8 Quad.
    • to move up to the 3.33 hex add US$550 to the base price for a total of about US$1500.
    • to move to dual Quads or dual hex ADD $1470 to $4250 to the base price.

  • MacBook Pro original parts...  How to make sure

    Just got a new MackBook Pro 2.4 upgraded to 4GB RAM and 200GB 7200 rpm.
    How do I know that I have original parts installed?
    Also, it came with OX 10.4 + upgrade disk to Leopard.
    Is that how it suppose to come?

    Why do you suspect that the vendor you bought it from sold you non-original parts?
    "...Also, it came with OX 10.4 + upgrade disk to Leopard.
    Is that how it suppose to come?"
    It is probably one of the last models produced with 10.4, so yes that is how it is supposed to come. You have the option of running Tiger 10.4.x or updating to Leopard.

  • My wife and I share a computer for our itunes accounts. How can we copy our music libraries to each others accounts without erasing the original library? We want to merge our songs.

    My wife and I share a computer for our itunes accounts. How can we copy our music libraries to each others accounts without erasing the original library? We want to merge our songs.

    If the music is on the same computer, import the songs to your iTunes library by dragging them into iTunes or choosing File > Add to Library (Mac) or File > Add File to Library or Add Folder to Library (Windows).  If the music is on different computers you can set up Home Sharing to copy the music from one library to the other (see http://support.apple.com/kb/HT3819 and http://support.apple.com/kb/HT4620).

  • I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. the computer says that if I "Sync" the iPad will be erase, and become like my iPods. how can I just get my files onto

    I am a first-time iPad owner/user. I bought a relative's original iPad. I want to leave the apps on it and add my own pdfs to read. My itunes account is really for my iPod. iTunes message says that if I "Sync" the iPad will be erase, and become like my iPods. If I make a new iTunes account, would the apps be erased when I tried to use it?
    How can I just get my files onto this iPad, and still have the apps that my relative left there for me?
    Thank you.

    iPads sync to 1 computer only.
    All media and apps are tied to the Apple ID that purchased them.
    Without your relatives ID and password, you cannot update any of the Apps.
    I am pretty certain he is also violating Apples terms of service by giving you the apps.

  • Question about garageband: I have 3 short original songs that i wanted to merge ala "Bohemian Rhapsody". Is that possible in garageband? their tempos are all different from each other. Advance thanks.

    Question about garageband: I have 3 short original songs that i wanted to merge ala "Bohemian Rhapsody". Is that possible in garageband? their tempos are all different from each other. Advance thanks.

    First of all, GarageBand iOS allows for only one tempo and there is no Merge Song feature.
    What you can do.
    Switch between the songs and copy-paste the individual Tracks. You can also Merge Tracks if you run into the 8 Track limitation.
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all a

    How do I reorganize my photos on iPad 2?  I need to move (not copy) photos from one album to another.  When I use the copy function to another album, and then try to delete an image from the original album, the system wants to delete the photos from all albums.  Please help.

    You can't do it directly on the iPad - the new album functionality basically only allows you to copy photos into those new albums, you can't move them. The way that I think of it as working is that you are just creating pointers to the photos in those new albums, so if you then delete the original photo on the iPad you therefore automatically delete all the pointers to it.
    If you want to re-organise your albums then you will need to do it on your computer and then sync those albums over to the iPad

  • I have 2 old sony ericsson units and i am in need of new parts (lcd for k800, ring flex for p1i). can i still order original parts from sony ericsson??

    I have 2 old sony ericsson units and i am in need of new parts (lcd for k800, ring flex for p1i). can i still order original parts from sony ericsson?

    http://cnn.cn/shop/sonyericsson-k800i-c-28_168.html You can order the LCD screen for the K800 from here--I've used them before and their service is excellent.There are also some P1i spares on the same website.As far as I know, SE doesn't actually supply such spares.

  • After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

    After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Is "Geography Name Referencing Program" part of upgrade process?

    Hi all,
    We have been upgraded to R12.1.3 and currently into first iteration.
    When querying the old transaction from Transaction workbench window we get, ""The system cannot determine geographical information for this location and cannot derive a tax jurisdiction. Please contact your system Adminstrator" error.
    I have run the "Geography Name Referencing Program" after getting this error. and that error got resolved.
    Kindly Advice,  "Geography Name Referencing Program", is it a part of upgrade process or we have to manually run the program.
    Thanks,
    AtulR

    I have seen the same document and ran the Geographu run referencing program. But my question here is, should we run this program immediately before releasing to Application team which is going to work on Applications
    Have you reviewed the post concurrent programs which are kicked off as part of the upgrade process to verify if the concurrent program was completed successfully or not? The program will be submitted by the upgrade process (as mentioned in the doc that you have already reviewed) and if that's the case the point here is to verify if it completed successfully or not.
    If the program ran successfully and you still hit the same issue then please review the docs in my previous reply. If the docs don't help then please log a SR.
    If the program failed to run then you will need to run it manually.
    If the program was never run by the upgrade then run it manually.
    Thanks,
    Hussein

  • Shake cpu usage woes since upgrading to Compressor 3

    We used to render from the command line (shake 4.1) without a problem. When we sent something to render, all 4 cpus would be used to the max (near 400%). (we include the "-cpu 4" command)
    Since upgrading to Compressor 3, it only works some of the time with no clear reason. Now I get less than 100% on a processor.
    Very frustrating.
    Any ideas on what makes it actually work when it does? Any work arounds?
    I'm open to using q-master, but we haven't been able to get it to work in any reliable manner.

    See:
    * http://kb.mozillazine.org/Images_or_animations_do_not_load
    * You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
    * You can check the exceptions in Tools > Options > Content: Load Images > Exceptions
    * You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)
    There are also extensions (Tools > Add-ons > Extensions) that can block images.
    You can use these steps to check if images are blocked:
    * Open the web page that has the images missing in a browser tab.
    * Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
    * Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
    * Go to the <i>Media</i> tab of the "Tools > Page Info" window.
    * Select the first image link and scroll down through the list with the Down arrow key.
    * If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    <!-- cor-el -->

  • Dv6 2120ev cpu upgrade

    Hello,
    I have a DV6 2120ev laptop with Core i3 cpu and I would like to upgrade it to either i5 or i7.
    Is it possible without replacing the whole motherboard?
    If yes, which CPUs are compatible?
    Thank you
    This question was solved.
    View Solution.

    marmelaki wrote:
    Hello,
    I have a DV6 2120ev laptop with Core i3 cpu and I would like to upgrade it to either i5 or i7.
    Is it possible without replacing the whole motherboard?
    If yes, which CPUs are compatible?
    Thank you
    Hi,
    Intel Core i5-580M is definitely compatible as it takes 35W (same as the original Core i3). I believe that even Core i7-720QM, 740QM, 820QM and 840QM are compatible but they require a different heat sink/fan (part number is 604787-001). 
    Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
    Testing - HP 15-p000
    HP Touchpad provided by HP
    Currently on Debian Wheeze
    *Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Maybe you are looking for

  • Adobe Reader and

    I do not want this message: Found trusted certificates from your previous version of Adobe Reader.Do you want to import them? The certificates are not imported in this step is not available in this version of Adobe Reader. How can I turn it off using

  • Condition for Target

    Hi, I am having a scenario SAP --> PI --> WebMethods. Depending on the occurence of a node in the source structure my interface should be executed. Eg: <SRC>      <Node1>         </Name>      </Node1>      <Node2>         </Addrs>      </Node2> </SRC

  • Segment Hierarchy - DEBMAS IDOC Creation

    Hi All, I am able to create a DEBMAS Idoc successfully but the segment hierarchy does not seem to be right. Can somebody tell me what fields are to be filled to create the correct segment hierarchy or point me to a standard program where DEBMAS idoc

  • Graphics to Buffered Image

    Hello there. Ill try to explain this the simplest way possible. Lets say i have a map, and sprites on that map. The map by itself its static, it will only move along as a camera move. Im calling, methods directly in Paint from my applet to draw the m

  • Imported AVCHD from canon hg10 looks distorted?

    Hi, I import AVCHD from my canon hg10 with the correct setting, but once imported the footage is distorted. Any ideas why I'm getting this problem? The same footage imported to iMovie plays back fine, just in premiere pro CS5 it appears distorted. In