Dv6-1361sb Touch Sensitive Panel

So I have a hp pavilion dv6-1361sb and had it for about 4-5 years. Recently I have had a problem with my laptop that I hope you guys can help me with. My Touch Sensitive Panel (Wifi, Mute and Volume Control) are not working. It seems like that it has been disable or something. I tried doing the plugging out the battery and doing a dry-startup thing. It did not work. I also formatted the hard drive and reinstalled the windows. It seem to help for a little bit until windows does an update and disable it. any thoughts Thanks?

Hi cedeic24,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see that you are having some problems with your Touch Sensitive Panel. I will be happy to help you with that. Installing the HP On-Screen Display Utility and let me know how it goes.
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Similar Messages

Touch sensitive pad not responding

Hi,
I have a laptop Pavilion dv4-2145dx that is about 4 years old. It has a touch sensitive panel for volume control and wireless. Off late, the I cant operate these 'buttons' - they dot respond to touch or tap. The wireless is Amber i.e. switched off and I cant switch it on using HP wireless assistant. The assistant says - wireless have been discabled by the wireless button.
How do I get the touch sensitive panel to work again?
How do I siwtch on the wireless?
Product Number: WA889UA
regards
Chako

Hi chako,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see you are having a difficulty with the wireless and the Touchsmart function. Here is a link to the HP Pavilion dv4-2145dx Entertainment Notebook PC Drivers where you can download the software and drivers for your system. You can also run The HP Support Assistant to aid with updates and to help resolve issues. You could also try running MS Fix It to help resolve difficulties.
You could also to a Windows restore back to a known good date.Using Microsoft System Restore (Windows 7)
You can also do a recovery Performing an HP System Recovery (Windows 7). During this process you will see a prompt to do a backup. If you have not done one yet, I recommend that you choose yes and do one now, to prevent data loss.
Restoring Files that were Backed Up Using HP Recovery Manager (Windows 7)
You can also contact HP support for assistance.
Please call HP technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. HP Technical Support Sitemap
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

G530 Touch sensitive volume control panel

After a quick reformat of my G530, the touch sensitive volume control panel (four black circular buttons in the upper right part above the keyboard) still works but the volume up/down buttons are in slow increments of 2% whereas before blue rectangular sound bars showed up on the screen when pressed and the sound increased by increments of 10%.
Where can I find the drivers for the touch sensitive volume control panel? I've looked everywhere but can't find them.
Any assistance would be greatly appreciated.
Lenovo G530 4446-35U
Conexant High Definition SmartAudio 221
V. 4.55.0.0
Solved!
Go to Solution.

try to re-install power management from here

Top of the screen not touch sensitive sometimes.

I bought a brand new razr maxx 2 weeks ago. Right after I got it I found that periodically the top of the screen would not be touch sensitive. I would not be able to pull down the notification panel or click on buttons in apps where the button was at the top. This would happen sometimes and other times it would work fine.
I also noticed that during the time the top of the screen was not sensitive, the rest of the phone was fine. Using the developer debugging tools it showed that I could not move the pointer to the top of the screen.
It would fix itself in the following way: after a while the screen would freeze. At that time if I pressed the power button to turn the screen (and not the phone) off and then on, it would start working again.
I have done a full factory reset. I did not add any new apps since I got the phone. I tried killing various processes. Nothing helped.
I showed it to the verizon technician and his only suggestion was to get a replacement phone (which will be refurbished). Since I think this might be a software issue, I am not sure how that would help.
I would greatly appreciate any suggestions as to how to fix this issue.
thanks,
--S

Hi Leotor
The problems you described would be very upsetting. Let's get this addressed. I'm not showing any known issues with the screen and freezing. It may be the device itself. We may need to look at a replacement.
Our replacements do pass a thorough inspection. See all about them here: http://bit.ly/R69yVZ
Please send me a private message with your account information. I would be glad to get a replacement device ordered.
Thank you
JoeL_VZW
Please follow us on twitter @vzwsupport

Changing Media Touch Inductive Panel Settings? for U330

Hi,
So yay I finally got my computer! Thank you Lenovo forums...
I have a ideapad u330, and everytime i use the touch sensitive inductive panel that controls my media player, it opens Windows Media Player. I want to use iTunes, and have been trying to tinker with it but cannot find the settings or config for the inductive panel, has anybody figured it out?
Solved!
Go to Solution.

I was bored so I added an autostart with windows function to my program that prevents the autostart of WMP with the play button. I'm not sure if it'd work for the U330, but you could try it.
You can get it along with its source from here:
http://www.mediafire.com/?djyykykyikh.
Here's the readme containing instructions and stuff:
Readme for FindKey32.zip
Contents:
This archive contains FindKey32.exe and a folder named FindKey32. The folder contains the source (done in VC++ Express 2009, although it's just plain old C using Win32 API) while the exe is the actual program.
Background:
FindKey32.exe was originally designed to remap the media keys on the keyboard (actually the first thought was to find out the keycodes corresponding to the media keys, hence the name), but through a mistake on the coding, it was found that the program is able to stop the automatic startup of Windows Media Player whenever the play key is pressed on the keyboard on the Lenovo Y510.
Purpose:
As long as the program is running, it will prevent the automatic startup of WMP when the play key is pressed. If interested, you are also able to check the keycodes of any key on your keyboard (ones that generate a keycode anyways, since the Fn key doesn't actually exist as far as the OS is concerned and doesn't generate a keycode).
Instructions:
In short:
shift + Fn + ctrl + windows key + alt + PgUp to show the main window
shift + Fn + ctrl + windows key + alt + PgDn to hide the main window
enable/disable autostart using the options menu
In detail:
Extract and place FindKey32.exe anywhere you'd like. Run the program. No windows will show up. To view the program's main window, press the key combination (shift + Fn + ctrl + windows key + alt + PgUp, which is basically the lower left corner plus the home button for the Y510). On this window, you will see the key codes for the keys you've entered in the past (don't worry, none of the information is saved, check the source if you'd like). The list will clear after every 500 keystrokes so that the program doesn't try to eat your memory after longterm use. Pressing (shift + Fn + ctrl + windows key + alt + PgDn) will hide the window whereas closing the window will quit the program).
If you'd like to run the program automatically as Windows starts up, open the main window and on the menu go to Options -> set autostart. If you no longer want it to autostart, choose remove. If you moved the exe after you've set autostart, you must reset it by pressing on set autostart again.
Contact:
PM plutos on Lenovo forums (http://forums.lenovo.com/lnv/)
email [email protected]
Message Edited by plutos on 12-14-2008 09:53 PM

Equium A300D-16C touch sensitive light wont light up

I have an A300D 16C on Windows Vista home premium and the touch sensitive lights wont light up when I press the first button to make them light up but the lights are still working just not permantly on which I want the equium sign at the bottom should light up.
Thanks

Hello Jonny
Those buttons are controlled by Toshiba Button Support utility and this utility is part of Value Added Package. To be honest I don't know if there is some way to enable/disable the buttons functionality but if you want you can try to do follow:
Remove preinstalled VAP from the system (Control Panel > Programs and Features), restart the notebook and install latest VAP for your notebook model listed on Toshiba Support page under http://eu.computers.toshiba-europe.com > Support & Downloads.
Please let me know if everything works well again.

Nokia 701 touch sensitive problem

I have with me 701 with the latest firmware version, i often have touch sensitive problem. Sometimes it get ok by just switch off the phone and sometime by removing battery (becoz then button too don't work).
what should i do?
Someone Plz help !

Hi salih_367,
Thank you for your post and welcome to the forums!
We're sorry to hear about your problem. It seems that your Nokia 701 headphone plug has a connectivity problem. As the problem is likely caused by the phone hardware, it is something you cannot fix yourself without voiding the warranty. What you can do however, is to check if the socket may have gotten some dirt or fluff in and try clean it.
If the problem persists, we would advise you to visit your nearest Nokia Care Point and let them have a look.
Let us know how you get on,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

Touch sensitive keys stopped working on Equium P300

Hi all,
my touch sensitive media keys have stopped working, they no longer illuminate, or work at all, could anyone help me out.
My laptop is still in warranty, do I need to ring them, or is there a short fix?

Fix? The magic word fix?
Who knows what you do with your notebook? ;)
I presume you have disabled this function somehow. Anyway try follow: remove Value added package from the system and after restart install latest version from Toshiba download page.

Touch screen no longer touch sensitive

Hi,
I have a ipod touch since the beginning of February. All was OK until yesterday ! The screen is no longer touch sensitive.
I'd been using it, took my headphones off when I met someone and when I put them back on couldn't hear any more music and the screen was no longer touch sensitive. Since then, I've re-installed the operating system several times but it changes nothing. When I slide my finger across the screen nothing happens.
The screen doesn't appear to be damaged - anyway its never got a knock. Any ideas ?
Thanks.

Hi,
Last week my touch screen also stopped responding. It comes back sometimes but the problem seems to get worse and worse. I have tried to do a full factory settings restore but it does not help and I have tried all the other resets as well.
What is going on?

Re: after update 4.3.5 i am facing touch sensitivity problem the iphone 4 is acting funnily... corner of the screen is not responding at all i cant use any apps, letters, numbers at the corner of the screen

Recently i have updated my iphone 4 to latest 4.3.5 update using itunes... from the time i have updated... i am facing problems... like touch sensitivity... like cant attend the call at one swipe... cant use any applications at the corner of the screen... some times i touch message icon... it moves to next page... some times in the applications without touching the screen in the app the features get activated... is it the problem with the software update or my iphone is having any problem with screen...
please let me know what should i do...

Do the basic troubleshooting steps described in the User Guide, Appendix B:
Restart phone
Reset phone
Restore in iTunes using a backup
Restore as a new iPhone, without using a backup.
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
Also, remove any screen protector.
If none of the above works, there is a hardware problem that needs evaluation by Apple or whoever provides iPhone warranty service in your country.

Missing Themes option and touch sensitivity is strange..Sticky swiping

Just bought 2 new blackberry storm 9350 one from Amazon and one from ebay for my husband. Both arrived new in their individual boxes. One was made in Canada (Amazon), and one was made in Mexico (ebay). The one made in Canada does not have options to choose different themes. That is my main concern.
A second strong concern is  the touch sensitivity is really sticky on the one from Canada. The touch sensitivity is real nice on the one from Mexico. I set touch sensitivity exactly the same on each, but the Canadian one is not nice at all swiping is really sticky.
Note:   This is my 3rd blackberry storm, and my husband's 2nd. These 2 are not acting quite like the earlier ones.
3rd issue is that The one from Canada did not come with a charger...Only the adapters for foreign outlets but no charger to plug them into. It did come with a manual and cds. However the one from Mexico did not come with a manual or cds (luckily I have one from the other box)

This is a partial duplicate:
http://supportforums.blackberry.com/t5/BlackBerry-Storm/mms-missing/m-p/2603751#M67694
But, given the additional information in this thread, I would deduce that the condition of at least one, and perhaps both, of the devices is not "new"...rather, a used device that has been carefully repackaged so as to deceive the purchaser into thinking they have bought a truly new device.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

The touch sensitivity is not working

the touch sensitivity of my screen is not working

Also if you have a stick on plastic cover try using an ISO Wipe (isopropyl alchohol) to clean it, you'll be amazed how much crap is on it. If this doesn't work, remove it and see if the problem still exists.

What external monitor is recommended for photoshop on HP dv6-1361sb?

Product Name and number: HP Pavillion Dv6-1361sb
Operating System : Windows 7 Ultimate 64 bit
Program : Adobe Photoshop Elements 9 (upgrading to 10) and possible future lightroom
What does HP recommend as a high quality (HP of course) external monitor for photo work with combination and are there any restrictions such as resolution restraints to be wary of?

Hi,
Depending on your requirement and how much you are willing to pay. The one which can calibrate colors for photoshop normally more expensive than others. Your machine should be able to handle all normal monitors in the market today.
You can find out more from this:
http://forums.adobe.com/message/2214728
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Glove mode (increase touch sensitivity option) for Yoga Tab 2 1050F dissapeared

I updated my yoga tab 2 10" to the lollipop 5.0.1 and now my touch sensitivity option is gone. I cannot find it under settings and no luck googeling (hence the post on this here)!!I even enabled my developer options and couldnt find it there either. I was able to work on the tablet with my stylus pen when I had that enabled on KitKat but now that I can't find it I can't use my stylus, and I need to be able to use it for college!!!Please Please Help!!!

Lumia_920_BUGS wrote:
BUGS \ ISSUES
3. Upon trying to share via NFC with Samsung Tab 2 it didnt work + soon after disabling the NFC my phone's Hard Buttons (all) went unresponsive. Only Screen Touch worked and I was on settings screen from where i couldnt navigate anywhere unless the Back and the Windows button work. The Phone screenwent off in 30 seconds and it was unresponsive on any button press. U tried calling myself and it was ringing but 920 didnt even lit up or show any signs of incoming call. I had to perform a battery pull by pressing volume down and power post which it booted fine.
You won't be able to share anything via NFC with the Galaxy Tab because it actually uses WiFi direct to do the file sharing but the 920 uses Bluetooth. NFC is there to just pair the two devices but not to transfer data between the two.
Also, from what you have described, your phone froze which has been known to happen and you correctly performed a simulated battery pull.

Getting Stuck, touch sensitivity in iPod touch 4G

Hi, I purchased iPod touch 4G recently one month back. It was working fine but now it is getting stuck when I am unlocking it (where we need to drag the arrow to unlock it). Also, it's touch sensitivity is also getting bad. I am keeping it with utmost care. I don't know what is happening. It is 8 GB version and I used 3 GB till now. This morning the problem got worse when I tried to zoom in or zoom out a a mail by my fingers, nothing was happening. Then I went to a pic where zoom feature worked fine and after that zoom worked in mail as well. But why this is happening? I can't understand. Please help.
Thanks.

- Make sure the touch screen is clean. A micro cloth is good for cleaning the screen.
- I would try in order the following:
-- Reset the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
-- Restore the iPod via iTunes on your computer. First restore from backup. If problems persist, restore to factory defaults.
-- Make an appointment at the Genius Bar of an Apple store since you likely have a hardware problem.

Dv6-1361sb Touch Sensitive Panel

Similar Messages

Maybe you are looking for