DV6-2005 No Sound after installing IDT Hi-def driver....

Hi everyone,
My os is win7 ultimate and i had to reinstall os due to some reason. the sound was working fine before the installing idt drivers but the mute/unmute light was'nt. However, After installing the driver everything is working fine(mute/unmute light) except there is no sound. I tried pretty much everything and still it doesnt work. Plz help, its really frustrating...

Uninstall IDT audio driver again from Your system.
Resources:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Go to: Control Panel -> Devices Manager
Click with right button of Your mouse on each yellow sign with exclamation mark ( ) and choose properties. Then go to bottom details and paste here hardware id . This way we will know what it is.
Below You've got example how to do it:
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Similar Messages

No Sound after updating IDT High Definition Audio Codec on my HP Pavilion dv6-6154tx laptop

I recently ran Advanced Driver Update to check and updated my audio driver (IDT High Definition Audio Codec) on my Windows 7 laptop. However, after the update, every time I boot up the computer, there is no audio output. I checked the volume control options and they are all fine, showing "all devices are playing sound". But there is no sound. Even the 'test sound' option does not play any audio, although the computer says that it is working fine. I read some posts on this forum and came across an answer - to uninstall the current driver from Device Manager, and manually install IDT HD Audio Driver for Windows. This works and I am able to get back the sound. However, I have to do this every time I start my computer after shutting it down, and this is proving cumbersome. Can somebody please help me with this and suggest a solution? Thanks.

Hi @Harkri ,
I have brought your issue to the appropriate team within HP. They will need to get information from you to look up your case details or serial number. Please look for a private message.
If you are unfamiliar with how the Forum's private message capability works, you can learn about it here
Regards,
George
I work for HP

No sound after installing flash player 11.3.300.262, have mozilla 13.0.01, working fine with flash player 11.2.202.233

Have no sound after installing flash player 11.3.300.262. Working fine with flash player 11.2.202.232

hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
http://forums.adobe.com/message/4483563
https://bugbase.adobe.com/index.cfm?event=bug&id=3210964

Portege 3110ct has no sound after installing XP Pro

I'm a novice when it comes to laptops, so here is the problem: My 3110ct has no sound after installing XP Pro. Didn't have sound when I bought it with another operating system on, report says no sound device installed.
Does this mean I need to get a chip for the laptop or is it a driver I need & where can I find the part or the driver for this.
Please help.

Usually if the sound driver was not installed you will get no sound but also a yellow exclamation mark should appear in the device manager.
If the sound card chip is damage I presume you will be not able to see the yellow exclamation belonging to the sound card in the device manager.
You bought this Portg as a second hand unit. Am I right?
So possibly the sound card is faulty.
The computer uses a ESS ES1978 (Maestro-2E) and ES1918 sound chip.
Check if you can find an XP sound driver in the internet.

No sound after installing windows 8 on my hp 620 help

no sound after installing windows 8 on my hp 620 help
This question was solved.
View Solution.

I cannot find your audio driver on HP's support page, but I was able to locate this one, which is the same driver as yours, just the most recent version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.
http://goo.gl/0IMBd
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

After installing a new hard drive can I install snow leopard directly from snow leopard disc

After installing a new hard drive can I install snow leopard directly from snow leopard disc. Or do I have to install previous versions first. iMac 7.1 (2007) 2.8ghz

You can install directly, assuming the disk is newer than your computer and not designed for a different Mac, but doing so won't install iLife.
(64305)

I see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder

i see that i have a problem after installing my new hard drive on my macbook pro mid 2009 version. I put a new hard drive, with all of my information from my old drive installed on it, into the computer. but now have the blinking question mark folder. I see that it means that it isn't reading the new hard drive.
did i miss a step between transferring all of my information from my old hard drive to the new hard drive and installing the new hard drive into the computer. I believe that i installed properly. it was quite easy.
thanks for your help

It means there is no bootable system on the drive. If you still have access to the old drive, then I suggest you boot from it then clone it to the new internal drive. Use OPTION boot to boot from the Recovery HD on the old drive:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Source means the external old drive. Destination means the new internal drive.

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

I cannot access an older time machine backup after installing an new hard drive.

After installing a new hard drive I tried to access my older backups in time machine but cannot. They are there but do not light up and allow me to access them, or select them.

First, if you're worried about the possibility of losing a backup set, then your backup strategy is inadequate. You will certainly lose those backups, no matter what you do, when the drive hosting them fails, as it will eventually. If you take data safety seriously, you should have at least two complete, independent backups of all your data, one of which is off-site at all times. I suggest you make a second backup now, before doing anything else.
The action I suggested won't delete all the snapshots; only the selected one -- unless something goes wrong, which is always possible. Without adequate backups, nothing you do is safe.

What to do after installing a new hard drive on inspiron 1525

after installing a new hard drive on my inspiron 1525 I place the drivevers and utilities driver on the cd/dvd player drive, chose boot from cd/dvd drive, and I get this message
your cd/dvd drive during this boot cycle is f:
a RAMDISK drive is available for this boot cycle as C:
it contains several hard drive setup tools. Please use these tools only under the direction of dell support staff.
F:\>
What do i enter after F:\> ?????????
<ADMIN NOTE : Email Id removed per Privacy policy>

Hello Warren,
To understand the issue and help you further, I would request you to help me with few details about the issue.
-- What exactly is happening when you turn on the computer?
-- Do you see a black screen with a blinking cursor?
-- What is the Operating System?
-- What is the System Model?
Run a hardware diagnostics to check if there is any hardware failure.
-- Restart the computer.
-- Keep tapping F12 key on the Dell Logo screen.
-- From One Time Boot Menu, select Diagnostics and press Enter.
-- If the test fails please capture the Error Code and write back to us would be glad to assist with the next course of action.

L channel sound comes through both L and R speakers after installing IDT High Definition Audio Codec

I noticed a sound problem on my laptop. The R channel works as expected but the L channel is split between the L and R speakers. After checking several different possibilities I narrowed the problem down to the IDT High Definition Audio Codec that I downloaded from the HP driver support page for my notebook model and operating system.
I uninstalled the IDT High Definition Audio Codec and restarted. This forced Windows to resort to using its generic "HD Audio Device" default. When I did this the sound was equally split between the L and R speakers as I would expect - L channel 100% though L speaker, R channel 100% though R speaker. I then re-downloaded the IDT High Definition Audio Codec from HP (sp59654.exe), re-installed it, and restarted. Immediately the sound problem was back - while the R channel comes 100% though the R speaker, the L channel is split between L and R speakers.
Please note this has nothing to do with adjusting speaker "balance". Both L and R channel volumes were set to 100% while investigating this problem. It's definitely some sort of incompatibilty between the IDT High Definition Audio Codec and Windows 8 64-bit or the sound hardware in the HP Envy DV6.
Here are my details:
IDT High Definition Audio Codec
Publisher: IDT
Date: 8/19/2012
Version: 6.10.6425.0
Notebook
HP Envy DV6-7200
Windows 8 64-bit

Here is what I would recommend you trying. Go to device manager and uninstall the audio driver. Once it is uninstalled, go to the device manager toolbar and select "Scan for hardware changes". After it completes, reboot the computer. Once the computer is rebooted, test the audio and let me know if that helped.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Loss of sound after updating IDT High Definition Audio Codec.

HP Support Assistant said a new IDT HI Def Codec driver was available so I downloaded and installed 6.10.6417.0 after which I have no sound output. I am not sure what driver version was installed before the update but I have since downloaded and installed 6.10.6330.0 and rebooted but still have no sounds. The device is enabled and Windows says it is working properly (which it isn't but then it is Windoz).
I am now totally at a loss as to how to proceed other than a clean install of Windows which for obvious reasons I would rather not do.
System details:
HP Envy 14-2002ea Beats Edition runing Windows 7 Ultimate 64bit SP1.
This question was solved.
View Solution.

Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp53001-53500/sp53281.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

NO SOUND AFTER INSTALLING WINDOWS 8.1

Hi, I'm hoping someone will be able to help. My sister has a compaq 58 laptop and after installing windows 8.1, now has no sound. The sound was there when 8.1 was installed but after logging off and logging back on again, the sound disappeared. We reinstalled windows 8.1 and same thing happened. We have run scans and got sound again but once again logging off and logging back on again, the sound disappeared, very frustrating.
The product code is DOX18ea#abu and serial number [edited Serial Number by Moderator]
help would be much appreciated.

Devina, This seems to be a common problem with Windows 8.1. It does not save a working state when logging off. I was afraid to touch my pc when the AUDIO was in a working state. However Microsoft logged me off with no fear and did not save the working state. What a great "glutware" corp. Having said that when the AUDIO is working it appears to work great! Sure wish HP/MICROSOFT could get their act together. Can you say "BASE BAND" , "DSP", "FIR" ETC. Well they think they know the fancy stuff. Now if they could just get it to function for normal people. Can you say "KISS".
ham123 ps: just send it back!! for total care!!!

No sound after installing Adobe Flash 11.7

After installing the new Adobe Flash Player 11.7 I have no sound.
I reinstalled, uninstalled and started the imac new but I find no solution.
When I'm starting the imac, I always heard the opening sound.
After searching and contacting the support with no results, I try to turn
up the volume at the source and connect the soundsystem again and
now can hear the music.
I think Adobe reduce the sound of the source at zero, and the imac
rest on the last position.
I'm right? Many Thanks in advance.

Hello,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

[SOLVED] No sound after installing pulseaudio

Hi,
I recently installed pulseaudio to be able to use skype since their update to version 4.3.
I installed with additional stuff using the command:
$ sudo pacman -S pulseaudio pulseaudio-alsa pavucontrol lib32-libpulse
After installing I ran the commands:
$ pulseaudio -k
$ pulseaudio --start
At this point, skype and sound were working properly again.
After rebooting my computer, I completely lost the sound. I tried killing and restarting pulseaudio and reinstalled twice, but I never managed to have to sound back since...
Any suggestions?
Thank you for your help
Last edited by nocarch (2014-08-08 00:29:48)

What troubleshooting have you done?
Moving to NC...

DV6-2005 No Sound after installing IDT Hi-def driver....

Similar Messages

Maybe you are looking for