Dv6-3181nr, installed clear windows, all time hot on power supply
Hey. I have a HP Pavilion dv6. I format my drive and lost factory recover. Now I have a clear windows 7, download a driver from official webstie HP and my lapotp all time hot when on power supply. I change past and clean inside laptop.
When instaled a HP Power Plan all time see not respondet.
Need a facotry resore, recovery .
Information my laptop :
dv6-3181nr, serial CNF110389N, product number LS954UA#ABA
On website HP if write my zip code to order, not found my country (Poland)
Do you have OEM HP to my laptop?
Windows 7 Home Premium 64 bit
Sorry for my english.
Hello dudek564,
Thank you for writing in. Your English is much better than my Polish.
Take a look at this page, which provides restore information. Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
Similar Messages
-
Power Supply Temperatures Running Hot! Mac Pro shuts down.
Hello,
First I will give machine/hardware specs of interest:
2 x 3 GHz Quad-Core Intel Xeon (pre 2009)
8 GB 800 MHz DDR2 FB-DIMM
NVIDIA Quadro FX 5600 (running 2 displays)
Apple RAID Card/Controller
SMC Version: 1.25f4
*venting dimensions around computer: top=18", left side=3", right side=3" and back=18".
Software of interest currently running:
OS X 10.5.8
iStat Menu
SMC Fan Control
My machine has been shutting down spontaneously and I suspect either CPU or power supply overheating. In the 5 instances this has occurred, the room was very warm (AC was not on) and I was running HandBrake with CPU at full and an iStat reading of 145 F. Ambient was 77 F and I was not reading power supply temps at the time. I figured for sure this must be a CPU overheating issue. However, just a few hours ago I had another shutdown. The room was warm again but I was not running Handbrake, but StarCraft II. I have played a lot of Starcraft II with no problems until tonight.
I decided, this time, to check the temps on my power supplies. Power supply 1 = 147 F, and #2 is at 178 F. After many hours of searching forums I have concluded that these are crazy hot temps! I immediately installed SMC Fan Control to attempt to increase the fan speeds. I was successful in increasing all fans except the power supply (stuck at 599rpm). I have now turned the AC on in the house and the Ambient is down to 70, PS #1 145 and PS #2 169. All of these temps are a result of and idle machine running a browser.
The following may or may not be an issue, however, leave no stone unturned. I currently have 12 external devices running on USB. 4 WD passport drives, 1 DVD writer, 5 WD powered drives plus the keyboard and mouse. Also, the Mac Pro is plugged into a small UPS.
In all my forum searches, I just can't seem to answer some basic questions:
1. Can an overheated power supply shut the system down?
2. What are optimal (normal) running temps for Mac Pro's? (everyone seems to have opinions, but there doesn't appear to be a technical specification anywhere).
3. I thought the fans, especially CPU fans, were supposed to kick in when the heat rises. Why are mine staying at minimal rpm's?
Finally, does it look like I need new power supplies? Fans?
This machine was put into service in March of 2008 and has done very intensive rendering for the film industry...long nights...rendering for days sometimes. It has been retired for over a year now and is used at a lesser degree.
Thanks for reading this long post! I appreciate any input you can provide!
Other iStat reading of interest:
Power Supply 1 voltage = 12.28 V
Power Supply 1 current = 26.44 A
Power Supply 1 power = 316.75 WAlso, the Mac Pro is plugged into a small UPS.
Put your peripherals on that.
Don't share the same circuit for A/C as the Mac Pro, and put the Mac on 1300VA UPS at least.
As for all those external drives.... I'd consolidate into a good SATA case or two.
And yes in summer run with 3 of the fans up around 900 rpm. -
ISR 4451-x power supply 4500W holdup time
Hi, folks.
I'm experiencing an issue with an automatic transfer switch (AP7723) and the ISR 4451-X power supply.
When switch is transferring a power the ISR is falling to restart process (with no correlation if one or two power supply installed).
Recent specification for the ATS says that a maximum transfer time is 18ms, typical time 8-12ms
I couldn't find any reference for the holdup time for the power supply PWR-4450-AC, only those for the 4500 series (http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/hardware/catalyst4500e/installation/guide/Eseries/0aspecs.html)
Please, advice
Thanks in advance,
VitaliyHi, folks.
I'm experiencing an issue with an automatic transfer switch (AP7723) and the ISR 4451-X power supply.
When switch is transferring a power the ISR is falling to restart process (with no correlation if one or two power supply installed).
Recent specification for the ATS says that a maximum transfer time is 18ms, typical time 8-12ms
I couldn't find any reference for the holdup time for the power supply PWR-4450-AC, only those for the 4500 series (http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4500/hardware/catalyst4500e/installation/guide/Eseries/0aspecs.html)
Please, advice
Thanks in advance,
Vitaliy -
Ever since installing iCloud and Lion my computer is slow or freezes. The color wheel comes on and My work stops. I have only a small window of time where my computers will function normally during the day. I know many others that have the same problem. I'll get 20-30 minutes of work done and then a sync or something comes on, the color wheel of death shows up, and my productivity is shot. I have to shut the computer down the hard way! when it comes back up, it is still either frozen or slow. I've checked in at the genius bar and all they say is that there have been some problems that Apple is trying to fix. It effects Mail, Contacts, Safari, Calendar....yeah, pretty much everything. My iPhone and iPad are not effected as much so I end up doing what I can with them. I've seen the blogs out there and understand that many have the same problem. I have been waiting to read about a fix but I have found nothing! Any ideas?
Not enough free space on the startup disk can slow the system down.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure there's a minimum of 15% free disk space.
For startup issues... open System Preferences > Users & Groups - Login Items. Delete any apps listed there then restart your mac.
And disable the Lion "resume" feature.
Open System Preferences > General
Deselect: Restore windows when quitting and re-opening apps
And Spotlight may be indexing... you can turn that off > Turning Off Spotlight | Mac Tricks And Tips -
Hi,
I am trying to install 'Playonmac' so I can install Meta Trader 4 - however each time I reach the next button in order to install XQuartz it hits a dead end
- the 'Installing Quartz' window is saying installing Quartz, but all it does from there is the clock the spins around, just keeps spinning and nothing happens - I have waited and waited for it, but it just kind of freezes there. I have reloaded the software over and over, and even switched off the firewall in case it was blocking Playonmac. It is really important I load Meta Trader 4 on my Mac.
Help will be much appreciated - Has anyone had this sort of problem? Does anyone know how to resolve it?
Regards
JoeAccording to wiki "the documentation from Apple states that Windows XP Service Pack 2 or Windows Vista is requisite for a Boot Camp installation, and it also mentions that trying to install an unsupported operating system could prevent the computer from booting even into Mac OS X". Sure that was from wiki, but it does seem to support and somewhat validate the problem I had with installing an earlier edition of XP.
http://en.wikipedia.org/wiki/BootCamp_%28software%29#Other_operatingsystems
Thanks for the info on the Filesystem info. My problem is that installing OS X on a mac is just a little bit more technical than installing Windows on a PC as there are a few more things to consider. Plus I'm not familiar with any of the utility programs as well. It's a **** miracle I managed to somehow create a volume to install OS X on when I thought I was erasing the partition I created for WinXP.
But I'm still not sure about the missing 40GB from my 500GB HDD. Upon coming to the desktop straight after OS X was fully re-installed I noticed that the HDD only had 460GB and that 440GB of it available space. So the full installation of OS X was 20GB, but where has the other 40GB gone? I swear I saw that I had much more available space on my harddrive (BEFORE I tried to partition my HDD under Boot Camp Assistant and stuffing up the computer). Is the missing 40GB from the ORIGINAL FACTORY INSTALL of OS X INCLUDING all my iTunes music and other files I uploaded to the computer earlier? It would make sense but there's no way, as far as I know, of checking this. Any ideas?
Cheers. -
My os x mavericks got crashed accidentely while installing the windows 8 and I am trying to reinstall using recovery console, but its take very long time and forcing me to download OS X mountain lion from internet, is there any where can I get offline download of OS file where I can install directely OS X Mavericks.
Hi, original poster here. I did not realize this would generate more discussion so I never checked back. I still had my warranty, so I took it to the store and got it repaired. The original problem I had was a screen with this icon flashing when I attempted to boot it up:
When I took it to the store, they told me that my computer was unable to communicate with the hard drive. I had this same problem three times in two months where this screen reappeared. Each time I went back to the store and they said the cause was different, but they were all hardware issues that physically made it impossible to communicate with the hard drive. After the third time, they simply replaced my laptop and I haven't had the same problem.
So in short: The reason you can't reinstall or move anything when you encounter this screen appears to be because nothing can communicate with the hard drive in the first place. You can't reach the disk or anything on it. So I don't believe it's possible to do anything besides take it to a physical store and have it fixed. -
On Win 7 64 bit, Firefox 7, 8 and Nightly all refuse to see Flash. I have uninstalled, installed Flash 11 several times.
There are two different versions of Flash, the '''''ActiveX''''' version for IE and the '''Plugin''' version used by most other browsers.
1.Download the Flash Plugin version setup file from here: <br />
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. <br />
Save it to your Desktop.<br />
2. Close Firefox using File > Exit <br />
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, <br />
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
4. Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). <br />
See this: <br />
[http://vistasupport.mvps.org/run_as_administrator.htm] -
I have downloaded Indesign CC2014 and installed 3-4 times but it doesn't run /work. I have installed on Windows 7 64 bit , HP laptop i7.
sign out and then sign back in to your cc desktop app.
then install cc 2014. -
Since I started using FireFox version 4, every time I open a "new window", all other instances of FireFox windows open up. This is annoying as it often covers up instances I am currently using with instances that I don't wish to use right now. I can't seem to find a way to keep this behavior from occurring.
Try go to '''about:config''' search for '''browser.startup.homepage''' change its value to:
'''about:home''' - default page<br>
'''about:blank''' - blank page<br>
'''url''' - a page that you want
Also:
*[https://support.mozilla.org/kb/troubleshoot-firefox-issues-using-safe-mode Firefox in safe mode]
*[https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems Reset Firefox]
*[https://support.mozilla.org/kb/troubleshoot-firefox-issues-caused-malware Problems caused by malwares]
*[https://support.mozilla.org/kb/how-to-fix-preferences-wont-save Preferences won’t save]
*[http://kb.mozillazine.org/Preferences_not_saved] -
How to run a safari window in the background at all times?
Ok, so you are probably wondering why I want to do this. Allow me to explain. The website twitch.tv is a streaming service for gamers, and there is a browser plugin specifically for the site called betterttv.
One feature of this plugin is that you will get a notification whenever someone you are following starts broadcasting, right in your notification center. But because its a browser plugin, and is specifically for this one website, it requires a safari window to be open with the website twitch.tv in order to push the notifications.
So my question is... how can I make a browser window stay open at all times and run in the background with this website open so that I get my notifications? I had the idea that I could retain the window even when I "quit" safari, because I can run a seperate instance of it in the form of Webkit Nightly which isnt affected by safari not being running.
But I am still oblivious as to how I would set up a window like this, and it has to start at login in addition to being running throughout the day. (I shut my Mac off at night.) Any amount of help would be appricatedI'm well aware of how to minimize thanks, and it *is* possible to have a Safari window open if you quit it, because you can run it as a separate instance by using WebKit Nightly...
I am just looking for the best way to set it up so that a WebKit Nightly window will open upon startup, navigate to that webpage, and hide itself. Preferably in the background. This could be done using a .command file or a startup script in automator. My question is.. What is the best direction to take? -
I cannot install iTunes. I get a Windows Error 126 and missing msvcr80.dll. I've tried uninstalling and re-installing based on all the suggestions, but still have an issue. I've removed all the services, tried moving the dll files as suggested, but I still have no success. Spent all day on this issue. I am running windows 7.
Sorry to hear this isn't going smoothly for you. Try Troubleshooting issues with iTunes for Windows updates. You may have seen some of the suggestions here before but is has taken some users more than one attempt.
tt2 -
I want to install a windows phone app I've created via AppStudio, and apparently a prerequisite is to install the Preview for Developers. However, it won't install. I get 0x80188308. (I've tried 5 times)
My Phone info:
NOKIA Lumia 920
OS version 8.10.12400.899
Lumia Cyan
RM-820_nam_canada_200, core build 3051.50009.1424.10362For help using Windows Phone (including installing the preview) please post in the Windows Phone forums on http://answers.Microsoft.com
-
When I reboot my mac it automatically launches disk utilities. i have run the utility. all clear. but each time i reboot i get the disk utility. how do i override so i can have my hard drive back?
What OSX version is it?
Does holding alt key at bootup show any boot choices?
Does holding Shift key at bootup to boot in Safe mode do the same thing? -
After clean install of Snow Leopard, Time Machine did not restore all files. When I try to restore these files I get "Not enough disk space" error. What do I need to do to get these important files back onto my Mac from my external hard drive??
Janet.b wrote:
About 3 years old...pretty dated now I guess. Am thinking I may just need to have it upgraded by a Mac tech.
For what the Apple Store's charge you can buy almost buy a new computer.
Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
I did the drive replacement myself, got a faster drive of better quality for $300 instead.
Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
So you see what's going on here.
I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
They can offer more personalized care which you need. Clone your old drive to the new and everything.
With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine. -
ipad apps 1 I lost all after I installed new windows and I tried to connect it between your computer and iPad, what's the solution? (Please Inbox : [email protected]) Thanks
Hi,
Sounds like it isn't to serious. the Bluetooth connection had an error and that is that generated
the Problem report.
When the Blackberry started to use Bluetooth the "gold standard" was using Microsoft's
"native" windows drivers. Now, every major PC company has there own version
Thus the problem report.
There is rather involved and lengthy procedure to check and install the correct Bluetooth drivers
in the Dell, but I really don't think you want to take that on.( Nod you head and say H*LL YES)
Here is what I propose;
The problem report needs to be resolved or it wont go away. Read the manual, call Dell,
try apologizing to it and that you'll never never do it again, what ever it takes!
Make the best investment you can make for your Blackberry, buy a media card.
All the memory in the BB is dynamic, this facilitates the functions of the phone.
By storing media in that memory, you effect are wasting X amount for file storage.
Store all media and files on the media card, and you will have a smooth running device.
They run about $25.00usd, they are easy to install, and they also make moving your
media a snap. You will need the USB adapter that came with it, but you can get that at
your local carrier store.
So if you agree with this I need some info.
On the Blackberry go to the options icon,click then scroll up to ABOUT.
I need your software version number, it's listed in this format: 4.x.x.xxx.
Send it back to me and I can tell you what size card you can get.
Let me know your thoughts!
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.
Maybe you are looking for
-
How to transfer video songs from pc to iphone 4s
I cant transfer video songs through Itunes from my computer to my Iphone 4S. please give tips and better ways. i am new user thanks
-
Created a web application but while executing I am facing problem Please help.... Error Message is given below Error while executing Service RSWAD_WEBPUB_CALL_SERVICE:V for object 1 () Thanks
-
Wireless Mighty Mouse Tracking Problem
I'm finding that sometimes my mighty mouse is not tracking downwards. During these blips it will still tracking left / right and upwards. When this happens, I can feel that the 'wheel' is not engaging the internal mechanism that drives the scrolling
-
Where can I find a list of all available add-ons, not just the ones I already have?
It is incredibly frustrating to go through hundreds (thousands?) of addons, even if they are broken down in sub-categories. I understand that new ones are being added regularly, but surely a list in some format might be available every month or so? T
-
I'm new to the mac. Have a nice new mac pro but one problem. I can't install my epson scanner. In checking for driver for the mac from epson the only one they currently have is a beta version which even they acknowledge has a lot of glitches. So I cl