Dv6-3298er RAM upgrade

Hello Folks!
Can you please provide the list of supported RAM for my notebook:
HP dv6-3298er Rossignol Edition
I have one slot free and one slot with:
Hynix 4GB 2Rx8 PC3-10600S-9-10-F2 HMT351S6BFR8C-H9
I want to add 4 more gb.
Thank you!

Hi,
You can upgrade the RAM upto 8GB. Check page # 2 for more information.
http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Similar Messages

Dv6-2158ee ram upgrade

I want to upgrade my go dv6-2158ee ram to 4gb but I couldn't found the right module. My original ram 2gb model no m471b5673eh1-ch9

I am unclear what you want. You have 4 gigs of RAM. Do you want 8 or what?

DV6-7331SA RAM upgrade

Can the HP DV6-7331SA RAM be upgraded beyond 8GB? Thanks.
This question was solved.
View Solution.

Hi,
You should be able to install 16Gb ( 2 x 8Gb Modules ) - as a double-check, see if the System Scanner on the following site agrees.
http://www.crucial.com/systemscanner/
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Dv6 7215 Ram Upgrade

Hello,
I have a DV6 7215 laptop that I am looking at upgrading to have 16GB of ram. It currently has two 4GB ram sticks and I have a single 16GB ram stick in my possession.
My questions is can I remove the two 4GB sticks and put in the single 16GB stick? Will this work? I know that laptop can handle that amounth of ram but I was unsure of how it would handle it in a single DIMM slot?
Regards,
Lance

qwertyuiop23 wrote:
Hello,
I have a DV6 7215 laptop that I am looking at upgrading to have 16GB of ram. It currently has two 4GB ram sticks and I have a single 16GB ram stick in my possession.
My questions is can I remove the two 4GB sticks and put in the single 16GB stick? Will this work? I know that laptop can handle that amounth of ram but I was unsure of how it would handle it in a single DIMM slot?
Regards,
Lance
Hi Lance
I'm sorry you cannot put single 16GB RAM in only one of the slots to upgrade your RAM. Please go through User guide of your product here . This is your product suport page . According to Page 5 of product description in the user manual, You can upgrade to maximum 16GB 1600Mhz DDR3 RAM with Dual channel configuration, i.e., each memory slots will support only upto maximum of 8GB per slot (not supported on computer models equipped with a 32- bit operating system). So you can only put 8GB in each slot to make total of 16GB RAMs in dual-channel configuartion. Hope this resolves your query.
Thanks
Visruth
If this is "the Answer" please click "Accept as Solution" to help others find it.
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

DV6-2106ea RAM upgrade

Hi,
I recently upgraded my DV6-2106ea laptop from 4GB RAM to 8GB RAM, yet the system only shows it as having 4GB RAM. It has Windows 7 (64 bit) OS so should support 8 GB. I updated the BIOS from F.1A to F.1C but this has not helped. Any advise would be most welcome!
Regards,
Dave

Hi Dave,
You're welcome
First of all, enter the bios menu and set the defaults ( usually f9 or f5 ) and save the change.
If the above has made no difference, remove 1 of the modules and see if the bios recognises it. If it does, try the same module in the other slot and check again. If the module is recognised in either slot, remove it and repeat the procedure with the other module and let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

DV6-3225dx RAM UPGRADE problem

The DV6 I bought 2 years ago has 2x2GB Samsung built-in memory, and I want to upgrade to 8GB to use virtual machines. I bought 2x4GB 1333 Mhz Kingston memory, installed them and now the problem comes. Windows boot up, but it is frozen for a while (~3sec) then restart when the logo boot screen appears. BIOS can recognizes the new RAMs. I am using Windows 7 Ultimate. I came back to the store where I bought these memory, asked them to check, and they are working very well. I asked them to restock these RAM and bought 2 new Patriot memory. The problem is still there. Restock again and keeps using old RAMs.
Please help.
Thank you.

To verify, does the problem go away if you use the original two sticks of RAM the system came with?
Chasing down the HP part number from page 60 of this guide, the HP part number for the 4GB stick of RAM for this system is 641369-001. Entering the listed part number from the guide at partsurfer.hp.com indicates that 641369-001 is the replacement 4GB RAM module. Currently, that one stick of RAM is ~$52 USD when ordering from HP. This same memory appears to be a little cheaper from CostCentral. The stock ram was 1333, but using 1600 memory won't cause any harm as the motherboard will just downclock the RAM to 1333.
Since a problem is present using third party RAM, I would recommend using memory that matches the part number listed from HP to ensure compatibility. The reason for this is that there are many specifications for RAM that are not listed in the documentation, so using HP RAM would ensure it is compatible with that particular system. You could run the start-up test (power it on and press F2 about once a second) to ensure the hardware is functional. Since it works with the stock RAM, it seems that the base hardware is fine.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP DV6 1143tx Ram upgrade

Hi I would like to know if the DV6-1143tx can support DDR3 1333 Sodimm ram. Considering it came with DDR2 but with a maximum possible 8GB of ram.

This notebook will not support DDR3... And yes, you can add yup 8 GB on DDR2 Memory...
This info is avaiable in service and Maintenance guide available on this link... http://h10032.www1.hp.com/ctg/Manual/c01758220.pdf
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Pavillion DV6-3060TX RAM upgrade

It has 2gb DDR3 SODIMM PC-8500 1067mhz. Wondering if I Can Install DDR3 1333mhz module, that will run side by side with the existing 1067 module. Thank you
This question was solved.
View Solution.

You can install a 1333 MHz memory module but it will not operate beyond 1066 MHz... This is limitation of the memory control of the processor on this notebook... Here is link to processor on your notebook.. http://ark.intel.com/Product.aspx?id=49022
Although I am an HP employee, I am speaking for myself and not for HP.
Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"

Can i do 16 GB RAM Upgrade (8GB x2) For my HP DV6 7052SR ?!

Can i do 16 GB RAM Upgrade (8GB x2) For my HP DV6 7052SR ?! If yes what is the good RAM for me ?

Hi,
Maximum of 8Gb RAM is supported for unit with 32 bit OS. If the unit as 64 bit OS, then you can upgrade upto 16GB as listed in the manual.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

HP dv6-6c75sa Windows 7 64-bit RAM upgrade

I am running an HP dv6-6c75sa on Windows 7 Home Premium 64-bit, with an Intel Core i3-2350M processor. My installed software is a combination of 32- and 64- bit compatible.
When I purchased the computer, I installed a RAM upgrade which took the total onboard RAM to 8GB. Due to a system issue which I cannot now recall, a search query informed me that my system would only recognise 6GB of what I had installed.
My computer is now 2 years old, and to extend its lifespan, and help it keep up with a recent software install which it cannot seem to cope with (Native Instruments Traktor 2, and Kontrol S4; I would like to make a new RAM upgrade.
I think that the reason only 6GB of my 8GB installed was recognised, may have had something to do with the 32- vs. the 64-bit system, but I can't be sure.
I know that the maximum RAM for Windows 7 Home Premium is 16GB. What changes could I make now that would allow my system to work at or near 16GB of RAM capacity?
Also, where I have a mishmash of 32- and 64-bit software, on a clean install running 64-bit, I believe that I should be able to get all of my software running again. Are there any traps I should look out for that may hamper this.
Do you think that my processor is the thing that is limiting my RAM capacity?
I would appreciate your input.

Hi @hyfpxm ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-6c75sa Notebook and concerns with system recovery.
Here is a document on performing a system recovery. Here is a document on troubleshooting issues with performing a system recovery.
Always back up important information before attempting a recovery.
This system supports up to 8 GB DDR3 10600 1333-MHz and I would recommend 2- 4s. Here is a link to the manual page 60 for the memory. If the specs are correct for your memory I would reseat it.
Use the built-in Windows System Information utility to view information on Operating System, CPU type and speed, 32Bit or 64Bit design, and installed RAM memory. The section marked Find specifications using Windows System information.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Hp dv6 ram upgrade ?

hi
i just want to know is it possible to upgrade my laptop's (DV6-7040tx) ram to 16 gb ddr3 ? i m not into much technical stuff so if you guys can recommend the best option available for my laptop ,it will be awesome

Hi,
Currenntly it has 4+2 therefore you can't get 8+6. You can have 2 + 2, 4+ 2, 4+4, 8+ 2, 8+4 and 8+8 configuration. In this case, you can have 4+4 (throw away 2Gb) or 8 + 4 (also throw away 2Gb) or 8+8 (throw away both).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

DV6-6108TX NOTEBOOK UPGRADE ENQUIRY

Hi,
Wish to enquiry,
1) How to upgrade the DV6-6108TX Harddisk by changing from 1TB 5400rpm to 750GB 7200rpm ?
If can, will the warranty voided ?
2) Can the DV6-6108TX upgrading its RAM and Video RAM ?
If can, how and will the warranty voided ?
Please advise.
TQVM.

Hi,
This is additional Question.
Can the DV6-6108TX notebook upgrade its O/S ?
If can, will it crashing the recovery partition or needed to buy the recovery cd for the new O/S ?
Please advise.
TQVM.

Memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??

What memory modules can we use for RAM upgrade of HP Pavilion dv5-1198de??
Max RAM? Vista? Windows 7?

I can't find a dv5-1198de but I did find a dv5-1198er which should be similiar. It states up to 8 gb of ram. HERE
I would try www.Crucial.com for suggested memory ,you can use their Scanner Tool to let it detect what you have and what you can upgrade/replace with.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

RAM upgrade on Satellite L300-20D

I was wondering if the laptop L300 - 20D.
Can get a ram upgrade. It has 1024 MB RAM 800MHZ. And i need 1500 MB .

Your notebooks RAM can be upgraded up to 4 GB.
For upgrade you can use follow RAM modules:
512MB DDR2-667 - PA3511U-1M51
1GB DDR2-667 - PA3512U-1M1G
1GB DDR2-800 - PA3668U-1M1G
2GB DDR2-667 - PA3513U-1M2G
2GB DDR2-800 - PA3669U-1M2G
Bye

MacBook Pro 13' Early 2011: Still Slow After 16GB RAM Upgrade

Hi,
I have a MacBook Pro 13' Early 2011 running Yosemite. After the RAM upgrade to 16GB, the speed of the computer is still not satisfactory, having some lag times in launching softwares and startup. Please suggest me what to do. Below is the report. Thank you!
Problem description:
The computer is still running slow even after the RAM upgrade to 16GB.
EtreCheck version: 2.0.11 (98)
Report generated November 18, 2014 at 5:40:20 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Early 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.3 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1600 MHz ok
BANK 1/DIMM0
8 GB DDR3 1600 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 512 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 0:7:52
Disk Information: ℹ️
ST9320325ASG disk0 : (320.07 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 318.84 GB (156.62 GB free)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 319.21 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.2) Support
[not loaded] com.marvell.kext.USBGenericPrinterClass (1.0.0) Support
[loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.74) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.74) Support
[not loaded] com.wacom.kext.pentablet (5.3.0 - SDK 10.8) Support
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.rim.BBAlbumArtCacher.plist Support
[running] com.rim.BBLaunchAgent.plist Support
[running] com.wacom.pentablet.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.macpaw.CleanMyMac2.Agent.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.rim.BBDaemon.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[not loaded] com.valvesoftware.steamclean.plist Support
User Login Items: ℹ️
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
JavaAppletPlugin: Version: Java 7 Update 71 Check version
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 2.4.0.11 Support
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
SharePointBrowserPlugin: Version: 14.4.6 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
DirectorShockwave: Version: 11.6.5r635 Support
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 318.84 GB Disk used: 162.22 GB
Destinations:
LACIE SHARE [Local]
Total size: 350.07 GB
Total number of backups: 5
Oldest backup: 2012-07-17 01:12:57 +0000
Last backup: 2014-03-19 07:05:24 +0000
Size of backup disk: Too small
Backup size 350.07 GB < (Disk used 162.22 GB X 3)
Top Processes by CPU: ℹ️
      9% mds
      6% WindowServer
      1% BBLaunchAgent
      0% AppleSpell
      0% fontd
Top Processes by Memory: ℹ️
103 MB mds_stores
86 MB Dropbox
86 MB ocspd
69 MB com.apple.WebKit.WebContent
52 MB Safari
Virtual Memory Information: ℹ️
13.07 GB Free RAM
1.71 GB Active RAM
740 MB Inactive RAM
1.66 GB Wired RAM
1.31 GB Page-ins
0 B Page-outs

First go to the RIM web site and look to see if they have an uninstaller for the device you had. Some times a reinstall of the application and then running the uninstaller is required for complete removal.
If no uninstaller is available, then you will have to use Spotlight to find all items with 'Blackberry' and 'Rim' in the titles. I would also download EasyFind and use that to locate such files. Often it will locate items that Spotlight misses.
Ciao.

Dv6-3298er RAM upgrade

Similar Messages

Maybe you are looking for