Dv6-7227nr

dv6-7227nr hard drive died. Locals at BestBuy of no use as I need to supply recovery media for reinstall.
How do I purchased this recovery media either on a DVD or prefered on USB drive????

Dks.
https://h10025.www1.hp.com/ewfrf/wc/mediaOrder?softwareitem=709673-001&cc=us&dlc=en&lc=en&os=4132&pr...
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Similar Messages

Does my Laptop have Discrete or UMA Memory?

Hello there...
After about 14 months the laptop my mother purchased for me for my 2nd year of Grad School has experienced its first major issue as the cooling fan is malfunctioning. At start up before the OS boots it tells me the fan is malfunctioning and therefore it wont boot unless I tell it too.
So I want to purchase a replacement fan so I can take it to the local repair shop and get it fixed. I believe that I've found the two potential options for fans as well. However, according to the manual the part is dependent upon whether the" computer model is equipped with an Intel processor and a graphics subsystem with UMA memory or discrete memory". Unfortunately I have no idea what this means at all...
This is the laptop...
http://www.cnet.com/laptops/hp-envy-dv6-7227nr/4507-3121_7-35547289.html
Thank you very much for anybody that can help me.
This question was solved.
View Solution.

Hi,
Your notebook has an integrated Intel graphics chip which uses UMA.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. This is an APPLE Itunes issue. Help!. HPPavillion DV6 64 bit, windows 7

Installed latest itunes update and computer tried to burn a playlist to CD and realized computer no longer recognizes my CD/DVD drive. After doing some data mining, found out from community this is an long standing APPLE problem- which doesn't get much tech support in terms of fixes. I have an HPPavillion DV6 64 bit, Windows 7 OS . After reading an earlier complaint from 2009 in the support community, I ran diagnostics from ITunes which gave the following result. Can someone please help? (I'm not enough of a techie to know what I'm doing or how to locate /reinstall CD drivers. I am searching for driver disc but cannot locate.)
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
VoiceOver Kit 1.4.2 (222093/222742)
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0043AC7C0368E428
Current user is not an administrator.
The current local date and time is 2012-07-24 23:43:08.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.

Doublechecking ... did you have CD/DVD drive tests checked when you ran those diagnostics? (I'm not seeing the CD/DVD test results down the bottom of the results where I'd expect to see them.)
For example, here's what I get:
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
Acer Aspire X3400
iTunes 10.6.3.25
QuickTime 7.7.2
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 003CAD7C0A1258F8
Current user is not an administrator.
The current local date and time is 2012-07-26 10:42:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is supported.
Core Media is not supported. (16008)
Video Display Information
ATI Technologies Inc., AMD Radeon HD 6570
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d6a87ba725121aa1240b1ce936c23470
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.2.0.1),
E: ATAPI DVD A DH16ABSH, Rev YA12
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 255:57 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 4.
The drive CDRW speeds are: 4.

HP Pavilion DV6 Restore/Data Recovery

I'm taking a look at a friend's laptop that was acting up. It refused to connect to the internet and when/ if it ever did the screen would go completely white locking you out of even task mngr. I installed AVG Free and detected a couple trojans. The problem seems resolved. It was working fine with several restarts until Windows detected updates.
After installing the updates and restarting Windows seems unable to display anything past the login background. Booting the windows diagnostic or system recovery leads to the same login background. Neither user account is displayed and there's nothing to do besides a hard shutdown.
I was able to open the HP Advanced System Diagnostics and ran a Start-up Test. It returned a DST failure with a failure ID of 94get9-5086ab-xd0021-60t803. The HDD is a 320Gb WDC WD3200BEKT-60V5T1.
I would love to simply perform a system restore but I have two problems. First, I need a way to back up the important user files. Second, I need a functioning method for performing a restore.
I'm able to boot into Linux from a USB but I can't get the HDD to mount. I don't know if the drive is encrypted or not. If anyone has advice for me on this I'd be grateful cause I'm not sure how to go about it. I don't have any hardware to connect the HDD to another system so I'll need to get the current OS working or find a way to boot to another that can access the drive.
As for the system recovery, since the default method isn't loading, is there something I can download from HP that will boot from a CD or USB? Or, is there another way to perform a restore outside of starting up Windows?
This question was solved.
View Solution.

Hi:
A DV6 would most likely have a W7 Home Premium OS installed.
See if rubbing the product key with a jelly bean works. It does from time to time if the key isn't too obliterated.
If you have a W7 home premium disk already (that you just used for a fresh install), just use the product key from the notebook to activate.
Otherwise, do this...
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
If the jelly bean trick doesn't work, you will be forced to purchase a set of recovery DVD's because they don't need a product key to work.
Paul

I am unable to find the usb 3.0 ports on my pavillion dv6-6155tx

i bought a nev hp pavillion dv6-6155tx laptop with windows 7 64bit home basic i tried to connect my Western Digital Harddisk to all the 4 available ports and still managed to get only the same rate of data copy. is there any problem with my usb 3.0 and how do i confirm that i actually have usb 3.0.

Hi,
Left hand side, but ONLY for selected models:
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

DV6-3122us/ after and during Factory restore problems

This is a DV6-3122us 64 bit notebook, 500GB hard drive, 4 GB ram, Windows 7 Home Premium OS. I restored it from the Factory purchased recovery discs, and I had a problem with that, had to do it 3 times kept locking up at 9% on the restore part. It finally went through then said couldn't install, turned it off, and it was installed. This is Windows 7 Home Premium. Now I have lock ups when updating. The HP assistant loads but says it has errors at the very top, and doesn't show the system information at the bottom. The hard drive only shows 80 GB allocated, and 397 unallocated. This is all the original hardware, which has been tested and has passed, memory has passed. Any Help would be greatly appreciated.

1. Right click on the partition ( C:\ ) you want to Extend into the now unallocated partition and click on Extend Volume.
2. Click on Next for the Welcome to the Extend Volume Wizard window
3. Select the amount of space in MB you want to use from the unallocated partition to use to Extend this partition
4. Select all of the available space .
5. Click on Next.
6. Click on Finish in the Completing Extend window
You will now see the Disk Management console with the new extended partition volume ready to be used.
7. Close Computer Management.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Imminent Hard Drive Failure Pavillion DV6

HP Pavillion DV6 - 6051ea
Windows 7 64-bit
Imminent Hard Drive error
I've run the hard drive scan, and got the following failure ID:
M4JC3U-5K9655-MFH14J-60E303

Hi:
I would back up my files as soon as possible, if I were you.
Also, if you have not created a set of recovery disks using the HP Recovery Manager, I would do this ASAP.
You may also want to create a system image using the backup tool in windows 7 and create a repair CD.
Then plan on getting a new hard drive in the very near future. Use the recovery disks or system image to load your OS back on the new hard drive.
Paul

System restore on DV6 not working after new hard drive installed (Vista 32-bit)

Hi there,
I have a HP Pavilion Entertainment laptop (DV6 1210sa) and recently on start up I have been receiving a message saying that the hard drive is at imminent risk of failure. I therefore burned the restore CDs and bought a new hard drive: (A Toshiba 2.5 inch 80gb SATA hard drive 5400 RPM). The first part of the restore completes successfully then the HP screen appears after a restart and then goes to install windows, but before this begins I receive a message saying “Windows setup could not configure windows to run on this computer.” I then have to restart and get the same message. Is this drive somehow incompatible? Is there something I’m missing?
Thanks in advance

Here are the factory specs for your HP Pavilion dv6-1210sa Entertainment Notebook Computer. Based on the specs, the original hard drive was 250GB. This could be a factor in your issue. It could also be that the drive is an advanced format (AF) drive. Please provide the model of the drive for our review.
Please send KUDOs
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

HP Envy dv6 Trackpad issues

I have a Hp Envy dv6 with nVIdia GT630M graphics. A lot of times, my trackpad has died on me and has left me in the blind. And recently, after installing the new updates on 01/11/2014, the multi-finger gestures on the trackpad do not work. It would be a big favour if you can help me out here as it is getting really frustating to use my laptop.
Thanks,
SassaW.

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties to disable the Touchpad on your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
Please Click this Link to find more troubleshooting steps to resolve this issue
Click on the below shown link to find the steps involved in disabling the Touchpad
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03922412
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Dedicated Graphic Card Failure (ATI) - HP Pavilion DV6

Hey guys,
I have HP pavilion Dv6 which have AMD Radeon Graphics card(may be 69xx or 74xx radeon series 1Gb ddr3).
Currently i have installed Windows 7 & Ubuntu(Dual boot).
Problem:
I was playing NFS when the system froze,so i turned it off forcefully, after that laptop always get stuck at windows logo.I also tried to switch the (bios)dynamic option(graphic) to fixed,in this option i do get past the logo but i am presented with blank screen ,in short no luck.
However i have managed to get it to work with ubuntu with intel default video card , through advanced recovery option.
What can i do to use some how similar approach for windows 7 i.e disable dedicated video card?
Can Graphics card can be repaired/changed easily?
Thanks

Have you checked the hard drive using Diagnostics in BIOS? Or F2 immediately after power on? (F2 may not work if you deleted the Diagnostic partition to install Ubuntu)
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Pavilion dv6-3130tx Blue Screen (BSOD) on adding RAM to second slot

Hi there,
I own a HP Pavilion dv6-3130tx with total of 3gb of RAM, one 1GB chip and one 2 GB chip. Recently I have been getting a lot of system crashes/freezes and occasional Blue Screen of Death (BSOD) with a variety of error messages. On contacting HP care in India they said to check the RAM chips and the slot for any problem. I have identified that the second slot is one creating the problem as the system crashes if use any one of the chips on that slot while both the RAMs work fine on the other slot.
Additionaly the RAM port/slot cannot be replaced as such, and since it is out of warranty getting the motherboard replaced isn't an alternative either.
So does anyone have any idea what might be the best way out of this problem?

Did the 3GB of RAM come with the computer or did you upgrade it at some point?
What version of Windows are you using?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How do i clean the air vents on my hp pavilion dv6 notebook pc?

Latelly, the fan on my HP Pavilion dv6 Notebook PC has been noiser than usual and it appears that my notebook becomes quite warm to the touch. The HP Support Assistant running on my notebook PC recommended that I can reduce the heat and fan noise by cleaning the air vents. How do I do this? Can I do this myself or do I have to have a professional do it?

Hi Rosie,
You can clean the vents on your notebook.
Buy a can of compressed air. Essentially, you need to gently blow out the vents with the compressed air to clear out the dirt and dust. You need a can with a small straw like attachment for the nozzle so you can point it directly toward the vents.
Do take a look at this document first so you know which way to point the air and how to avoid damaging the fan inside the notebook.
Reducing Heat and Fan Noise by Cleaning Air Vents
Extra information:
Fan Runs Constantly, the PC Notebook Operates Slower than Expected and Generates Heat
Good Luck!
            When you see a great Post and you appreciate the help…
       Please Click the Kudos Star on the Left to say "Thank You"!
         Fixed? Click this Post “Accept as Solution” so others can find it.
Remember: The more information you provide, the better help you can receive.
Always Include: (Notebook) Product Number , Printers – Model Number ,
                   Operating System and an Error Description
                     Never give out your Serial Number
                      2012 Year of the Dragon!
Kind Regards,
Dragon-Fur

SSD's not working/ being detected - Windows install errors on HP Dv6-1149wm laptop

Okay, well I have tried three different brand new ssd's: 1. kingston v300 120gb SSD, 2. samsung 840 120gb ssd, and 3. another kingston v300 120gb SSD. Tried in that order.
The Kingston drives- Were not detected at all by the bios no errors or nothing, nada. When attached to a different computer running windows the drives are detected fine. nothing wrong there.
The Samsung drive- This was the second drive I tried. It was detected by the bios but diagnostics gave me the "303 quick" Error. When installing windows through a USB, it would ask me for drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition it or format it. Not even partitioning the drive through command prompt using diskpart worked. It would return an error saying incorrect parameter or something like that (Note I was able to partition the drive here but not format to ntfs). I could manually partition it on another system all the way. Formating/partitioning via a different system allowed me to get all the way into the installation up until the point where it says "installing features" then it gives me an error saying it was unable to set the system local - or something like that. On top of that I also tried installing windows on the other system which worked great but would not transfer over to the laptop. I also tried cloning the previos drive onto the ssd but when booting up the computer gave me a disk read error.
My personal desktop drive(OCZ Vertex 4 128GB)- This one worked fine. Computer diagnostics picked it up fine and didn't report errors. The only thing is I didn't try installing windows on it because I already had an install there.
My thoughts- My best guess is that there is some sort of incompatibility with the drives firmware and the computers BIOS. The Bios (Insyde h20 F.21) is very limiting to begin with, too user friendly and not much to do there, second it hasn't seen an update since 2011. Seems to me like SSD technology might be advancing quicker than HP can keep up with their updates (This of course assuming its the BIOS that is at fault)
I am open to ideas suggestions, basically anything that can help me out at this point. I've spent many hours on this and I have turned out empty.
This question was solved.
View Solution.

Computer_World wrote:
Okay, well I have tried three different brand new ssd's: 1. kingston v300 120gb SSD, 2. samsung 840 120gb ssd, and 3. another kingston v300 120gb SSD. Tried in that order.
The Kingston drives- Were not detected at all by the bios no errors or nothing, nada. When attached to a different computer running windows the drives are detected fine. nothing wrong there.
The Samsung drive- This was the second drive I tried. It was detected by the bios but diagnostics gave me the "303 quick" Error. When installing windows through a USB, it would ask me for drivers before proceeding. When installing from a cd, I could get to the point where I see the drive listed. I would get errors when I would try to partition it or format it. Not even partitioning the drive through command prompt using diskpart worked. It would return an error saying incorrect parameter or something like that (Note I was able to partition the drive here but not format to ntfs). I could manually partition it on another system all the way. Formating/partitioning via a different system allowed me to get all the way into the installation up until the point where it says "installing features" then it gives me an error saying it was unable to set the system local - or something like that. On top of that I also tried installing windows on the other system which worked great but would not transfer over to the laptop. I also tried cloning the previos drive onto the ssd but when booting up the computer gave me a disk read error.
My personal desktop drive(OCZ Vertex 4 128GB)- This one worked fine. Computer diagnostics picked it up fine and didn't report errors. The only thing is I didn't try installing windows on it because I already had an install there.
My thoughts- My best guess is that there is some sort of incompatibility with the drives firmware and the computers BIOS. The Bios (Insyde h20 F.21) is very limiting to begin with, too user friendly and not much to do there, second it hasn't seen an update since 2011. Seems to me like SSD technology might be advancing quicker than HP can keep up with their updates (This of course assuming its the BIOS that is at fault)
I am open to ideas suggestions, basically anything that can help me out at this point. I've spent many hours on this and I have turned out empty.
Hi,
I suggest to read this thread:
http://h30434.www3.hp.com/t5/Hardware-Upgrades-Replacements/probook-6560b-does-not-recognize-my-SSD/...
Your thoughts are exactly the same as mine. The motherboard doesn't like the firmware or the controller on the SSD.
This manual says that AMD doesn't support SSD:
http://h10032.www1.hp.com/ctg/Manual/c02842252.pdf
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Problem With Pavilion DV6 3052nr Recovery Manager!!!!!!!!

1. HP Pavilion DV6 3052nr
2.Windows Seven HomePre OA x64
3. On Recovery Manager : I Deleted all of my parttions on my hard disk. then when I used recovery disks to restore it to its factory set , after extracting the image files on disks to the hard drive , system restarted and boot to the Recovery manager with " Restore Incomplete " error. Just help me,pleaseeeeeeee

Hi:
You may have to purchase a set of HP recovery disks or if you can read all 25 characters of the W7 product key on the bottom of your notebook (DON'T POST IT), you can do this...
If you can read the 25 character Microsoft windows 7 product key, you can download plain Windows 7 ISO files to burn to a DVD for the version of windows that came installed on your PC, and that is listed on the Microsoft COA sticker on your PC's case.
Burn the ISO using the Burn ISO option on your DVD burning program and burn at the slowest possible speed your program will allow. This will create a bootable DVD.
Or use the Windows 7 USB/DVD installation tool to compile the ISO file you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB method of compilation.
http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool
Use the 25 character product key on the PC to activate the installation.
The key will activate either a 32 or 64 bit installation.
Then go to the PC's support and driver page to install the drivers you need.
Link to the W7 ISO file downloads is below.
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Paul

Hdmi video and audio for hp pavilion dv6 1050us does not work

I'm trying to use my hp pavilion dv6 1050us notebook with a TV Philips model 40PFL8605D using a HDMI cable but nothing function: can't get the image displayed at computer on the TV display. The HDMI cable and the same TV were tested using a ASUS notebook and everything worked all rigth: video and sound. Then I concluded that the only possible source of problem is my HP pavilion dv6 1050us notebook.
Can I get some help?

Hi (:
I frequently play The Sims 3, I have all, but myabe 3, extensions. And I have a Pavilion dv6-6c15nr Entertainment PC. Now I was wondering, is this a bad idea? Occassionally, my games will freeze and even just completely glitch within the game, sometimes unallowing me to save. It's very frustrating, especially when you get so far. My question is would it be better to just get a gaming pc and leave this one to surfing the web and doing school work? Or is this one good, and can I download or buy something to help my computer maintain or improve its performance?

Dv6-7227nr

Similar Messages

Maybe you are looking for