DV6000 Touchpad help

Hi,the touchpad on my HP pavillion DV6000 doesn't work.
It has never had any provlems until recently.
The light that indicates whether it's activated is solid blue.
It stopped working when I fitted a replacement keyboard for it while it was on because I forgot to connect the ribbon cable.
I think Im may have pressed a combination of keys whilst doing this that has disabled the function of the touchpad.
Any help would be great.

Hi
Try to uninstall the drivers for the touchpad and restart the notebook an that should remove the settings and reinstall the drivers.
Or 
Go to the link below choose the OS you have and download the touchpad drivers and update it
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=1842155
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

Similar Messages

  • DV6000 Touchpad Cable help

    Does anyone know where I can locate a new 4 pin touchpad cable? I have been searching and I am having no luck. I can find the power ribbon cable but no touchpad cable. Thanks.

    Hi
    Try to uninstall the drivers for the touchpad and restart the notebook an that should remove the settings and reinstall the drivers.
    Or 
    Go to the link below choose the OS you have and download the touchpad drivers and update it
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=1842155
    Hope this helps.
    ***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
    ****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
    -VJ
    Although I am an HP Employee, I am speaking for myself and not for HP.

  • Mini 210-2080nr touchpad help

    Hello,
    I recently bought a HP Mini 210-2080NR and I'm having difficulties with the touchpad. The right and left key is connected to the touchpad. When using the touchpad, I'm able to navigate with the entire touchpad including the keys and that is causing a huge inconvenience.
    Is there a way to lock the right and left click keys on the touchpad, so I'm able to navigate smoothly? Thanks in advance.

    Check if you have Accidental Contact Mitigation (ACM) feature in the Synaptics Properties Windows, that will help you set restrict the tap and pointer movement zone...So outside that zone, you can have more control over tap and pointer movement, To Activate the function, Click on Filter Activation Time, and set the Filter Activation Time to Zero Seconds and check.......Check below screenshot...
    Although I am an HP employee, I am speaking for myself and not for HP.
    Make it easier for other people to find solutions, by marking my answer with 'Accept as Solution', if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"

  • Flash games on touchpad help

    hi there.
    I have touchpad and try to play games of flash, and have difficulty using.
    I got bejeweled 1 working, having done a google search and found a popcap site link ending with .FLV, It worked great.
    however, when searching for bejeweled 2, on popcap site, came to regular page, where select to play, the page moves everywhere, and I cannot drag jeweled as whole page moves, 
    on my pre 2, I would play by turning pre 2 horizontal, and the small flash game would maximize, and would not shift, the verticle would return to normal, but that does not appear to happen.
    any help would be great.
    how can I play flash games on touchpad so 
    a the game maximises and fills screen.
    b the screen does not move when trying to play the game.
    thanks. Ralph :-) 
    Post relates to: Pre 2 p102ueu (Unlocked EU)

    it appears I can't get bejeweled 1 working correct, again .
    I don't know what I did correct, last time, to get the flash bejeweled working last time. Any help is appreciated.
    how do I get the flash games working correct without game sliding everywhere.
    did do right but now can't figure out.
    is there some specific instruction for using flash games on touchpad.
    thanks in advance. :-)

  • Bad Touchpad HELP!

    Hello guys, this is my first time posting here and i hope that i cant find  a solution.
    i recently bought an HP Envy m6-n012dx online. my problem with it is that the touchpad is giving me problems. it sometimes acts erratic. sometimes i cant scroll using two fingers, othertimes the cursor just jumps around, other times it keeps moving to the left by itself, other times i try to left or right click and it doesnt respond, etc.
    i tried installing and re installing the drivers, i reformated the computer, i've even tried using drivers used my other HP models that use the same Touchpad.
    Im not expert but by the way it behaves i think it could be an internal electrical problem? interference? not properly grounded maybe?
    so does anyone else is having or have had the same problem? is there a solution??
    and in case i cant solve it, what steps should i follow to use my warranty?? i still have around 8 months of warranty
    Thank you!

    Hi,
    It sounds like you've done most of the troubleshooting needed to eliminate Software as being the issue. I would open a Service Support call with HP at 800-HP-INVENT. Follow the prompts and make sure you relay to the Support Agent everything you've explained here.
    I am an HP Employee
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

  • Power Supply Problems dv6000 - Please Help

    Hi,
    I have a weird problem with my power supply to HP Pavillion dv6000.
    When i turn on my computer the power supply flickers periodically every 2 seconds as if there is a position problem but there isn't.
    When i turn off my computer with the battery inside it shows that it's charging but sometimes it doesn't.
    When i take the battery out of the computer the computer doesn't charge at all.
    Anyone had the same problems?
    Thanks

    HP released BIOS updates for some models with charging problems. Check your drivers page using button at top of this page_'Support & Drivers'.
    Be sure to use complete model number as shown in Section 1 or P/N shown in Section 2 when searching for correct page.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • MSI GE70 2OE Touchpad help!!

    Hey guys, I'm new to the forum and I don't believe I've found a solution to my particular problem. I have the MSI GE70 2OE Laptop and I had bought the Logitech G700s external mouse and so when I'm trying to Fn+F3 the touchpad mouse doesn't turn off. I've tried disabling it in the device manager but that did not solve the problem. Does anyone have any suggestions? Sorry if this is a repost or if it's already been solved.

    Have you tried using the touchpad settings in the driver? There should be a setting to turn the touchpad off when an external mouse is installed.

  • Macbook Touchpad help

    Hello
    i got ahold of a macbook 3,1 by trading my desktop for it. When my friend had this macbook it was "broken" so i went ahead and xferd all her goodies to her new computer and i reformatted it and reinstalled mac osx leopard.
    i took it over to her house today and she told me "i used to be able to swipe,pinch, and rotate with the track pad." so i looked through the settings searched the web and i cant find anything that say this model (3,1) can do these things.
    as of now it does have some multi-touch features, like tapping 2 fingers for right clicking, 2 find scrolling but nothing else. my friend swears she used to do more, so what im asking is: did i do something wrong installing mac osx? am i missing something, a trackpad update? do these features really exist for the 3,1 version of the macbook?

    See i figured that much , dave. because her wife also has a macbook which is unibody and i think she used her wife's for so long when hers broke down that she doesn't remember, ill just drop the convo with my friend and keep letting her think what she thinks. its mine now anyways.

  • Touchpad bottom buttons stopped working

    hi!
    something strange happend to my laptop (ThinkPad T520), yesterday bottom buttons of touchpad just stopped working... upper buttoms seems to work fine, except for one thing, in Ubuntu sometimes they don't work too and I noticed that turning off and on the touchpad helps. In Windows upper buttoms seem to work fine, but bottom buttons still do not work.
    since bottom buttons issue relates to both OSs I have it looks to be something with laptop itself, I had no problems with touchpad or keyboard for 1.5 years of using it (I even reinstalled Ubuntu yesterday, I thought something happened to my system, but it didn't help, still the same issues, and still I have to turn on/off sometimes...)
    My OSs:
    1) Ubuntu 12.04 LTS
    2) Windows 7
    I did not update anything during last few days, and actually I use Windows only to check something (so rare enough), so I'm sure I was not updating anything by myself there. Although I can't say that anything was updated automatically, and I could just miss that it happened.
    Unfortunately for me I am in the business trip, I am limited to what I can do about it, as well as feel uncomfortable to work with my laptop now (I got used to use my bottom buttoms with touchpad...). Is here anything I could do about it on my own without any risk to damage anything?
    thanks in advance for any advice!!!
    Max

    actually I was wrong regards Windows, touchpad works strange there, by default pressing anything (except for bottom buttons, they do not work at all, as I wrote) opns a popup menu. I've applied all important and advised updated from Lenovo, also I've updated my bios to the last available version (I believe 1.42). Nothing changed, turning touchpad on/off, even in bios, does not change anything there. Using UltraNav (also installed the last available) I turned of extra functionality for touchpad buttons, and now at least upper buttons works in expected way, presing touchpad also do not show popup anymore.
    after bios updating, in Ubuntu no visible changes: upper buttons function as before, touchpad itself works well, bottom buttons do not work at all. Lokks like I can't do anything about it

  • Pointing devices to beat Old Man Arthritis

    I've posted earlier on getting a keyboard that will work with my clumsy arthritic hands, and settled with an IBM Model M that I love. I'm still fighting the meeces for a good fit. The Microsoft Elite Wireless put a lot of stress on my wrist, so when it died I got a Microsoft Natural Laser 6000. Nice mouse, easier on the wrist and fingers, but no matter how I change the settings I can't get fine movement. I have a new Logitech Marble mouse that is nice, but no scroll bar and I use that feature a lot. I can't use the Synaptics driver with my Adesso stand-alone touchpad, and the tapping is far too light for me if I leave it set to the default PS/2 or IMS/2 settings in xorg.conf. I'm at a loss as to what to try next, I know the problem can be solved.
    Any ideas? I know there are a couple of odd designs out there like the vertical mouse, but I don't know if that would help. The best so far has been the touchpad, if I could just turn off the tapping. Another solution would be to use the trackball on the right, if I can find one of the scrollbar (only) that once were sold to clip to a laptop.
    I'd sure appreciate any help or advice offered,
    Thank you,
    Bob

    koch wrote:hello bob,
    where do you come from? i am from germany and just read an article in one of the few(or almost the only) good computer-magazines here.
    do you speak german?
    Thank you for replying, Michael. No, I only speak and write English.
    they tried some stuff like vertical mice, special keyboards and some other stuff in trelationship with special medical problems. also they had some statements from doctors who are specialiced on this.
    The touchpad helps, but swelling in the joints of my hand and wrist make me clumsy and the "tapping" feature is too sensitive for me.
    Synaptics has a nice Linux driver to adjust that feature or turn it off, but they don't make a stand-alone touchpad. Adesso makes a stand-alone touchpad, but no drivers. I emailed both companies - Adesso said bluntly "no, we don't support Linux", but Synaptics sent a very nice personal reply saying that they were getting many such requests and were working with their OEMs to offer such a product. I'm now a big Synaptics fan , but it may be a long time before I can buy a touchpad from them.
    short summary as far as i remember: you have to try it out but for most of the people there was a great improvement (is it the right word?). i will have a look if i have the magazine still here.
    if yes i will post some stuff from there in english. i think they also had some links in the article.
    as far as i remember the doctors said there should be a solution for most of the people.
    PERHAPS i can post some email-adress of the author or some doctors so you could send them a mail with your question referring to the article i am talking about. the language should be no problem.
    I would very much appreciate that if you can find the time, there's no hurry for a reply so please don't inconvenience yourself. Right now the problem is manageable, but it's a progressive disease.

  • Yoga 2 touchpad does not disable when in tablet mode(after updating to 17.0.19) please help !!

    i have yoga 2 pro 13
    had the latest driver for the touchpad installed from the lenovo website but allwyas had problems with the tow finger scrooling... 
    so i updated it toe the last virsion of the Synaptics site - the 17.0.19 17Oct13 ver
    now everything works perfect but the only thing that it does never disaple automaticaly and not even manually in tablet mode so when i use it in tablet mode happens lots of times that im touching the trackpad from behind and it makes a mass !!!!!
    please help me
    is there any sloution ?? 
    i don't want to go back to the lenovo driver becouse that one having scrolling with tow fingers all the time
    help !!

    with that driver i allways had scrolling problems with tow fingers... instead of scrolling it change the zoom screen all the time
    and i sow it's known problems so i had to install the Synaptics driver....
    how can i resolve this??

  • Help with touchpad issue!!

    After looking on the web, I realise this is not an isolated issue and many people have had it.
    *Problem in bold if you cant be bothered reading everything :)*
    The problem I have is with the touchpad on my Macbook Pro. This morning my mac had a funny turn and kept freezing soon after loading up the desktop. I could move around with the touchpad but not do much else, so I restarted and plugged in an external mouse and this worked. So I was really annoyed (My TV had decided it was going to pack in aswell this morn) and was about to hurl my mac at the TV to teach them both a lesson when my TV fixed itself and my touchpad gained some usability.
    This is the strangest part - to start with the touchpad could double click - but you had to use three fingers instead of two, it could three finger swipe - but with four fingers and 5 fingers for expose!! But I couldn't single click. *Now, However, I can do everything on the mac by touching the pad but there is no response when I physically click the pad down. You can hear the click but nothing happens, unless you press really hard, in which case it works 1 out of 5 attempts.*
    My macbook is only four months old, so I'm presuming it is still under warranty? However, I didn't buy directly from Apple but instead from Currys, will this make a difference. I would just take it in to an Apple Store but the nearest one is about 1.5 hours away and I have no car So I don't want to waste money and time getting there only for them to turn me away/ have no warranty!!
    Thanks in advance for any help,
    Adam

    Should they fix it for free? I
    If the unit is under a year old or you purchased the 3-year AppleCare plan, then yes.
    Check your warranty status here.
    Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • For some reason, I can no longer use these laptop touchpad functions: moving up and down a web page, and zooming. Help! I feel handicapped.

    I used to be able to use these touchpad movements on my Samsung laptop, but not anymore.

    Hi, I tried both, didn't work. It does say on the mozilla help page that the info may not be updated, so can you check (attached below) and tell me the latest if available? Thanks!
    ===========================
    1. In the Location bar, type about:config and press Enter.
    ○ The about:config "This might void your warranty!" warning page may appear. Click I'll be careful, I promise!, to continue to the about:config page.
    2. In the Filter field, type mousewheel.withnokey.
    3. Check these settings:
    ○ If mousewheel.withnokey.action does not have a value of 0, double-click on it and change it to 0.
    ○ If mousewheel.withnokey.numlines does not have a value of 1, double-click on it and change it to 1.
    1. If you changed either of the previous two settings, test scrolling to see if it works. If it doesn't work, or if you didn't change either setting, double click mousewheel.withnokey.sysnumlines to change it from true to false (or vice-versa).

  • Help me, driver touchpad hp dv6-6038tx

    I have just reinstalled window 7 for mHp DV6-6038tx but no driver's touchpad - hp dv6-6038tx 
    anybody has got help me? tks
    This question was solved.
    View Solution.

    Hi,
    Try the  Synaptics driver on the link below.
    http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52661.exe
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • HP Pavillion G Series touchpad faulty. HP started helping then said product was out of warranty

    My laptop (HP Pavilion g6-1343sa Notebook) doesn't work properly and hasn't done since the first day I used it. The cursor can be very erratic, flickering around the screen when I'm not even touching the touch pad. Sometimes when I am using the touch pad it will only move vertically up and down the screen, or it will start zooming in and out on the web page I am viewing as if I was pinching the touch pad and not simply trying to move the cursor around.
    It didn't happen so much when the laptop was brand new and I didn't really use it very much to notice, but it's increasingly getting worse to the point where I can't use the laptop without disabling the touch pad and plugging in a mouse. I tried uninstalling the touchpad software and it seemed to be better for a while but I think that was just coincidence and the problem has come back worse then ever.
    I tried to put up with it but it got the the last few days of my warranty and I realised I needed to do something or I would be stuck with a faulty laptop, so I contacted HP customer support. They advised me to carry out a factory reset of the laptop and see how that worked. I pointed out that my warranty was about to expire, and was assured that since I raised the support case during the warranty period, it would be honoured even if I reported back to them outside of the warranty period. I have this in writing from HP, yet when I reported back to the customer support adviser that the problem hadn't gone away I was immediately forwarded onto the complaints department who told me that they weren't prepared to help me because the product was now out of warranty/
    I complained to them and they eventually said that if I had proof I had been told that they would help me even after the warranty expired, I could forward it to an email address they gave me. So I did this and they have ignored my email. I've sent various emails since this and they are still ignoring me. I emailed the original customer support adviser, and they have ignored me. And I sent an email to the MD of HP via the website, and so far this email has been ignored.
    I've been sold faulty hardware, lied to, and ignored. I'm utterly disappointed with HP and thought I would share my experience with you. Is anyone from HP prepared to look into this for me, and fix/replace my laptop?

    I have forwarded your post to the right people for their review. You should hear back from someone shortly via Private Message on this forum.
    OrnahP
    HP Support Forums Moderator
     Clicking the "Kudos Star" to the left is a great way to say thanks!
     When your problem has been solved, accept the solution by clicking "Accept as Solution" to help other members in the future!
    Rules of Participation

Maybe you are looking for

  • How to write the query for year revenue and avg

    Hello Team I have the table create table sale (sale_id varchar2(32) not null, sale_epoch_microsec numeric(18,0)       not null, sale_amount_cents numeric(18,0) not null, customer_id varchar2(32)       not null, industry_id varchar2(32) not null, prod

  • OBIEE version 10.1.3.4.1 with Informatica 64 bit

    Hi Gurus, Can someone please advice if we use Informatica 64 bit (8.1 & 8.6) with OBIEE 10.1.3.4.1. As far as what i have seen on edelivery site 10.1.3.4.1 only come with 32 bit version for windows. so will this combination work well? or cause any ot

  • Record validations

    hello, I am new to mdm i have learnt some mdm console and data manager. now i am feeling problem in writing expersions in record validation. I understand them well but dont know how to write this. can anybody give me example for this. good luck.. Jyo

  • I cant connect to the home share with my airport extreme

    When I connect the apple tv or open itunes the apple extreme shuts down and restarts.  And i cant connect.

  • Creating XMP data from HTML page

    I have a very large number of images that are linked from websites in the form: <a href="images/filename.jpg">Image caption.</a> I would like to be able to use a script to batch process my files that will collect the text between the <a ....> and </a