Dv6110ca will not recognize the wireless adapter

hello,
Pavilion dv 6110 ca with windows XP (worked fine)
i upgraded to windows vista, and installed the latest drivers. but now my wireless card is not being recognized.
please help

Hi:
Do you see the wireless adapter listed under network adapters in the control panel?
Is it listed in the general device manager as a Network Controller with a little yellow ! mark?
If you don't see it at all anywhere, then you probably need to install the HP Wireless Assistant and use that program to turn the wireless card on.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55203-1&cc=us&dlc=en&lc=en&...=
Paul

Similar Messages

  • Windows 7 will not detect the wireless adapter on my Dell D610 laptop

    Windows 7 will not detect the wireless adapter on my Dell D610 laptop
    Any workaround?

    hey guys.... i believe i have some light for you all. I gave my daughter a D610 which came pre-installed with Linux (ubuntu). She did not like it so i loaded windows 7 and guess what? no wifi.
    Unknown Device listed on device manager. to make the story short, after almost returning the laptop and spending 2 days looking for drivers everywhere I decided to reload Ubuntu because the wifi always worked. Then going a little deeper inside linux hardware
    specs I listed all the hardware using the command lshw from linux shell and what shows up as wifi interface? Atheros AR5001x.
    Problem was almost solved. The adventure now was find the driver for Atheros AR5001x that worked for windows 7. And now just to finish this story even faster, the diver is xp32-5.1.1.9.
    Unfortunately after downloading the driver I did not save the website. I have the file with me if you need.
    Just send me a message and i will be more than happy to email it to you.
    Happy New Year for all!!!!

  • My HP Officejet Pro 8600 Plus printer will not recognize my wireless router passwrd

    My printer was working fine but when I turned it on today it wouldn't connect to my wireless router. I try inputing the correct password and the printer gives me this message......"the WPA security passphrase configured on your HP printer does not match your wireless router setting" .
    I have entered the password several times and I know what I have entered is correct

    Hi @Southglen,
    Welcome to the HP Forums!
    I noticed that your HP Officejet Pro 8600 Plus printer will not recognize your wireless router password. I am sorry to hear this, but happy to help!
    I would recommend to go through this guide, How to Find the WEP or WPA Key or Password for Your Wireless Network, just to double-check your wireless password, in case it might have changed.
    I would also suggest a hard reset, by going to this post How to perform a Hard Reset, by @Rich1.
    After those two steps, I would suggest a firmware update, Getting Printer Updates for HP Officejet Pro 8600 (N911), Officejet 6600 (H711) and Officejet 6700 P....
    Let's start with these steps, and we will go from there!     
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • I am trying to hook my macbook pro to a sony bravia TV via DVI to HDMI cable and the TV will not recognize the signal. The same set up has worked with three other, though different televisions. Any thoughts?

    I am trying to hook my MacBook Pro to a Sony Bravia TV via DVI to HDMI cable and the TV will not recognize the signal. I have used the same setup with three other TV's, each a different brand with no problem. Any ideas?

    Is the TV set to take input from the HDMI connection?
    On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection.  Try clicking Detect Displays just to see if the computer can now sense the presence of the connection.  Check your connections.
    If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image.  Set the proper resolution (probably 720p, 1080i, or 1080p).  Set the refresh rate (probably 60Hz) if that preference is shown.  You should see a picture at this point.  I  recommend turning off mirrored displays if it is enabled.

  • I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any t

    I have a Sony radio in my car.   With IOS  4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio.  After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone .  Any thoughts.

    I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?

  • Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

    Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?

    Place the device in DFU mode (google it) and restore as new.

  • While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

     Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place." 
    When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
    I have no other options to choose another font. Thanks for any help you can direct my way. 
    Debbie
          From: sukritd15 <[email protected]>
    To: Deborah Karr <[email protected]>
    Sent: Friday, February 13, 2015 5:35 AM
    Subject:  While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
    created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items. Help.

    I have an external hard drive that I have been using for years.  All of a sudden my mac will not recognize the external as a "save as" device location.  But the external does show up on my desktop and I can open it to drag and drop items.  What happened and how do I get my mac to rerecognize the device?!?!?

    Hi,
    Check Finder>Preferences>Sidebar, is it checked there to show external drives?

  • HT1918 I have changed my new apple email address at the itunes store but when I try to buy an app on my iPad my old apple id (email) comes up and will not recognize the password. How do I change this? I tried going in through settings/tapping apple ID to

    I have changed my Apple ID when I got a new email address and confirmed it. However when I go to my iPad to buy an app my old Apple ID comes up and will not recognize the password. I tried going into the settings on my iPad and tapping on the old Apple ID to go in to change it but it will not recognize it and I cannot get in on the iPad to change it. How do I change this ID on my iPad for the iTunes store?
    Jaylsworth

    How did you fix this??

  • I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    I have iMovie 09. I just erased my external hard drive, but it is still formatted for the mac. However, iMovie will not recognize the hard drive. It shows the only hard drive available is the computers. How do I get the external hard drive to show up?

    In Finder's Menu, select Go menu>Go to Folder, and go to "/volumes". (no quotes)
    Volumes is where an alias to your hard drive ("/" at boot) is placed at startup, and where all the "mount points" for auxiliary drives are created for you to access them. This folder is normally hidden from view.
    Drives with an extra 1 on the end have a side-effect of mounting a drive with the same name as the system already think exists. Try trashing the duplicates with a 1 or 2 if there are no real files in them, and reboot.
    If it does contain data...
    http://support.apple.com/kb/TS2474

  • I have a sony rx100 and my version of lightroom (4) will not recognize the raw (.ARW) files. Please help!

    I have a sony rx100 and my version of lightroom (4) will not recognize the raw (.ARW) files. Please help!

    I have version 4.4.1 on my computer now, which is functioning properly - but does not read the .ARW files. When I download the link you sent and try to open it, it pops up as version 5 and I get this image (attached). This is my first time in one of these threads, not sure if i have to reply to each of you individually?
    DdeGannes, could you please tell me how to recover the serial number from my operating system?
    Thank you SO much everyone!

  • I am using an epson projector to present images downloaded to a thumb drive. I renames the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2

    I am using an epson projector to present images downloaded to a thumb drive. I rename the images on export to "untitled 101, 102 etc. The projector will not recognize the sequence. It wants 001, 002etc. If I try to start 001 lightroom changes it to 1, 2  ... 10,11 etc. How can I export and rename starting with 001?

    The projector may actually be processing a 3 digit number in numerical sequence.  Have you tried your export/collection in order  sequence starting with 101?  Assuming you have fewer than 899 images you should be OK. (I had to fiddle with export sequence for a display frame which used the file date and time for sequence!)

  • When I try to import video, Lightroom-4 will not recognize the video files. How do I fix that?

    Lightroom 4 will not recognize the video files.  It will only import the photo files.  How do I import the video files?

    You might provide some additional information, such as what types of videos, from what cameras, and what version of LR4 you are using.

  • I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

    I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

    Do you remeber the exact (or close to it) wording of the error message?
    Try manually placing the iPod in Recovery mode and then try to restore
    Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can also try another computer  to help determine if you have an iPod or computer problem.

  • Windows 7 will not recognize the ipod.

    I have an ipod 4th touch 64 gig. Windows 7 will not recognize the ipod. It will make the noise of a connection and will only charge. It will not show in my computer as a hard drive. It will show in Itunes and other third party programs. I have searched the net and tried most of the advice to try and fix but will still not show as a hard drive.
    Has anyone had this problem and if so is there a fix?
    thanks

    I did read along the way about some of the ipods not being recognized as a HD. I just installed Iexplorer and looks like it will do the job. As long as I have something other than Itunes to see it as a HD. I use Syncios and Copy Trans and both work great as to transfer music. But to see the ipod as a HD iexplorer will do the Job.
    Again my ipod 4th gen will show in my computer but only the DCIM folder and a few other with pictures, no music folder or the control folder from the ipod.
    My ipad works great and another ipod the long thin ones work but not this ipod touch 4 gen 64 gig.
    Any other suggestions or help much appreciated
    thanks for the iexplorer it should help

Maybe you are looking for