Dv63119sa turns on and displays HP logo, then screen stays blank. Please help!!
Hi everyone I was hoping someone could help me with a problem I've been having with my laptop. So from the beginning since I first got this dv63119sa I've had problems with overheating, and although this is another issue entirely from what my post is about I also ask if anyone has a solution to this as well. Now back to my previous problem, for some reason when I turn my laptop on everything seems fine, the HP start-up logo shows up, then it goes to a screen where I type my hard drive password in because I have TrueCrypt encryption installed and this is all fine, but after the password is accepted it goes to an endless black screen. It also beeps once with a space of about 20 seconds roughly it will beep once again. Now I looked this up and apparently it's something to do with the video card, which doesn't make sense on account that I can see the start-up logo etc. I've tried every solution I can find and nothing works so I'm hoping one of you kind people can point me in the right direction. Thanks in advance
I realise I have posted this in the wrong section, could an administrator please move it to the correct section please. Apologies
Similar Messages
-
When we go to view albums from our iphoto library on apple tv it takes forever to load and then it only plays between 24 and 35 photos then goes back to the start. Then it goes through again and displays 1 more photo each time. Please help!
It's likely that your Library database has been damaged in all the crashing.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
When I turn my ipod on why does the screen stay blank and then turn itself off?
When I turn my ipod on the normal start up screen appears with the apple logo in the middle, but then after a few seconds the screen goes blank and it turns itself off. It was working fine the other day. I even charged it overnight to make sure that it wasnt because it was out of battery. I dont know what to do, it has over 600 songs on it and around 300 photos, I know that the memory isnt full because I checked the other day and it said I had around 1GB left. I cant do anything on at all because the screen just goes blank and then turns itself off. Please help, thank you
Well, I strongly suspect that a gig isn't quite enough "extra" storage to allow operation.
However, first, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
I turned on my ipad after charging it and the screen went blank. I tried the home button and on off button and that did not help. I went to iTunes and rebooted the ipad and restored it and it asked me to reboot from the ipad but the screen is still blank. It will go to a blue screen if I hit the on/off button. What else is there to check?
If you restored the iPad, there is nothing else to check. I suggest that you make an appointment at an Apple Store Genius Bar and let them evaluate your iPad.
-
Pease help me I can't get into my iPod when I put my lock screen password but it doesn't even show it's hard please help me
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Can't get past the time and date intial set up screen can anyone please help?
We purchased Apple TV last night, hooked everything up according to the directions, until we get to the Setting Time and Date Screen, which Apple TV- for more than 12 hours now, has been trying to establish. We've set the time zone both manually and automatically, I have emailed and tweeted Apple Support but no help so far, this is my last plea before I return it.
Any help would be appreciated.
ThanksWelcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
Somebody please give me an idea involving no loss of information
Thank youThank you very much for all your help lex schellings this solved my problem
Thank you very much again :-D -
G5 turns on but display stops at gray screen+apple logo
Can someone tell me why my G5 turns on but display stops at gray screen+apple logo. The keyboard and the superdrive not responding. After a minute the fans kick in and grow louder and faster...?? I tried a reset with the P and R but keyboard N/S. USB have power. I do get the start sound then the gray logo+screen.
Thanks for the help anyone!!
G5 dual 2G Mac OS X (10.3.9) 2G RAM, 23" displayI was getting a similar issue yesterday, stuck on the
grey screen, then the G5 turned into mini turbine
engine. I'm not sure what fixed it, i took out the
plastic wind deflector and noticed three leds next to
the RAM slots were lit up.. with some quick googling
bringing me back to apple's support pages, it turned
out the lights came up because the deflector shield
wasn't in place. Anyway myabe it was slightly out of
place, but that coupled with unplugging the power
cable for some moments seemed to help, and i was able
to get past the logo screen etc..
but i was still getting intermittent issues, with
startup and programs, and getting plenty of crashes.
So i did the Apple Hardware Test, and after 3hrs it
turned out my RAM was at fault. I recieved the
machine only a week back, since then i've added new
RAM, which was the exact same Samsung RAM that apple
use, though one stick didn't share the exact same
serial, it was still the same spec.. anyway i've
removed the pair of 1GB sticks for the time being,
and since doing so, i've got my mac running to its
full strength.. i just hope i can sort out this RAM
issue and not have blown my money.
Thanks for the help but I tried the cable thing etc and nothing so I reformated the disk (clean install and I'm back to normal now...so the RAMS were not the problem in my case.
Also, I'm glad I backed up all my stuff frequently therefore, no losses...
G5 dual 2G Mac OS X (10.3.9) 2G RAM, 23' display -
My iPhone 4s is stuck on a black screen that shows a USB cable connecting to iTunes. The phone will not turn on and the iTunes logo as I described only shows up when I plug the phone into the charger or my computer. I have tried the reset in restore mode as well as the DFU? mode and it still will not work. I have the latest version of iTunes on my Mac. My error code was 2002. I also tried it on my laptop (windows 8.1) and none of the above worked. My error code on my laptop was 02. The phone is through Verizon and it has absolutely no damage. It was working fine up until this and I have been trying to fix it for 2 days. Please help! I am unsure of what version the phone was currently running on before this because I have another iphone that's my primary phone and have not used this one in about a month. I do not believe it was updated to IOS 7.
Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors -
i bought the iPad and got it home and when I turned it on, all I see is the iTunes logo w/ a usb connector and arrow. How do I clear that and go to the home screen??? HELP!
You need to Set Up the iPad... Connect it to iTunes...
See here for Getting Started...
http://www.apple.com/support/ipad/
and here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf -
when i plug in my ipod touch (8gb, 3rd generation) it doesn't turn on and the apple logo flashes on and off. before this it wouldn't turn on unless it was plugged in.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
i downgrad my iphone from ios5 to ios 4.3.3 and after restoring the ios 4.3.3 i fixed all itunes error but after that my i phone screen turned off and the apple logo didnt shows up any more what ever i did my iphone model 4 gsm and fyi i try all the ways to turn it on but it didnt sucsses
roaminggnome
thanks for helping but i didnt know that is the downgrade is forbidden and i ask for help and u didnt help me so i just want to thank u for telling me that is the downgrade is forbidden >>> but now i didnt have i phone any more so thank u so much again >>>> -
Should iphone 4 receive messages when turned off and display them when switched back on
should iphone 4 receive messages when turned off and display them when switched back on
It's up to the cellular carrier, but I believe most (if not all) will enqueue the messages when your iPhone is off.
So generally speaking, a few minutes after you turn your iPhone on, your messages should display. Similarly, your voicemails would arrive. -
Apple tv 2 starts up and shows apple logo then resets over and over
apple tv 2 starts up and shows apple logo then resets over and over
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Open iTunes.
Select your Apple TV in the Source list, and then click Restore. -
Nano 6th turns on for a few seconds then screen goes black and nothing. what is wrong with it....
My 6th gen nano turns on for a few seconds, then screen goes black and nano goes off. what is wrong with it? can any one help me out? do I need new battery? do I need a full repair? or is there something I can do myself to fix it. Thanks for your help.
At the moment I say as I've fixed, momentarily:
I made a downgrade to 1.0
The problem, gentlemen, is the upgrade from 1.1 and 1.2
It is a pity that I lost all the new features offered by the new firmware , just because Apple staff could not think to try this new update, on ipods with some airtime.
I hope Apple pull out a version 1.3 with the ability to choose the feature detection, and the user can disable it at will.
Maybe you are looking for
-
Meter reading order simulation
Hello experts, I need to "simulate" meter reading order creation process, to download orders (EL35, with specific formkey) and use the file for external system. Is this possible? Thanks, Angela
-
Hi to everybody, I'm trying to show an error exception like this example: try catch (Exception cause) StackTraceElement elements[] = cause.getStackTrace(); for (int j = 0, n = elements.length; j < n; j++) System.err.println( elements[j].g
-
Calling an Portal iView from Webdynpro - Error
Hi, I have two iViews in a page in my Portal. Both of them are WebDynpro iViews. The iView on the Left hand side consists of links to different WebDynpro iViews in the same Portal. I have used LinkToAction UI element, on event of click i am executing
-
Best practices for storing logon/password info
I'm curious what are the best practices and/or what other organizations are using to store the logon/password information that needs to be shared by several users. This could be, for example, RFC logon that is used in several interfaces; FTP logon, e
-
Diferencebetween report and script?
cud anyone tell me the exact difference between script and report ? i dont want definition