DV6416eo.. 500GB HDD, Windows 7. Base system devices w/o drivers

Hie
I replaced the original HDD with a 500GB WD5000BEVT.
It works fine after I disabled Native SATA Support.
I installed Windows 7. 
Enabling Native SATA Support gives me a blue screen, and Windows 7 can't fix the problem.
In device manager, I get in Other devices:
Base system device - PCI bus 5, device 5, function 2
Base system device - PCI bus 5, device 5, function 3
No drivers for these.
What would these devices be? Native SATA support?

Hello jthompsn1957,
You may want to read this article prior to any attempted OS downgrades.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • Missing driver for "Base system device" x2 after Windows 7 install on laptop

    Upon upgrading to SSD drive and fresh installation of Windows Professional 64 bit, I have two conflicts in device manager referring to "base system device". Both devices are PCI Slot 2 (PCI bus 67 device 0 function 1)
    Both devices report the following code in system information: 
    PCI/VEN_1180&DEV_E852&SUBSYS_146D103C&REV_01/4&7ECE869&0&02E2
    I have read through 16 pages of other people with simlar problems but not the same code. I have installed the Ricoh 5-in-1 reader for 64 bit software with no success.  Any help will be greatly appreciated
    This question was solved.
    View Solution.

    Here is the link.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=4173846&swItemId=ob_79991_1&swEnvOid=4059

  • Satellite A10: 'base system device' after HDD reinstallation

    I have formatted my laptop's hard drive (Toshiba Satellite A10) and downloaded the necessary drivers from Toshiba Europe web site. Everything worked out fine. Then I decided to upgrade my network adapter driver (wrong decision) and it slowed down considerably the system.
    Believing that I was holding the solution in my hands I formatted again HDD and when it came to reinstalling the drivers everything loaded ok except one:
    BASE SYSTEM DEVICE
    Please let me know how to resolve this issue.

    Did you install the chipset utility?
    If not, do that firstly before installing any further Toshiba tools and drivers.
    i recommend you to use the Toshiba Recovery CD.
    Please check also this useful Intel article:
    http://www.intel.com/support/motherboards/server/S5000VSA/sb/CS-022703.htm

  • Windows 7 RC - Portege M200 - Base System Device

    Windows 7 RC is running nicely on my M200 but the Device Manager is showing an 'Other Device' with no driver loaded. It is described as 'Base System Device' and Properties shows its location as 'PCI Bus 2, Device 13, Function 0'.
    I have tried on-line searches and browsing within my M200 for a driver with no success. I have read elsewhere in these forums that the 'Base System Device' could be tied up with the SD Utilities. I have downloaded a fresh copy of the SD Utilities and installed them but still no luck. Certainly the SD Format utility won't work - it does not recognise when an SD card in inserted - so may be the SD Utilities need revision for Windows 7.
    Not a major problem as I can format SD cards elsewhere but it would be nice to get a clean bill of health from Device Manager.
    Has anyone else run into this problem and, even better, found a solution?
    Keith Woolf

    Some progress! I have checked out the IR device; it has a 'later' driver installed than the one listed on the laptopvideo2go website so I have left it alone. It report 'working OK' although I have no means of checking it.
    I found the VENdor and DEVice numbers under Base System Device\Properties\Details\Hardware Ids; they are VEN 1179 and DEV 0805. The 'pcidatabase' decodes these as VENdor Toshiba America Info Systems and DEVice SD Card Controller.
    This seems to confirm that, as I guessed from a thread on another forum, it is the SD Card Controller that lacks a driver and that it is 'Toshiba' who - we hope - will come up with an updated driver 'in due course'.
    Thanks very much for your help; I have learned how to identify PCI problems and have bookmarked the M200 Impressions site - very interesting and I shall keep an eye on your work.
    Thanks again, all.

  • Base System Device driver in WIndows 7

    I recently installed WIndows 7 on my Lenovo 3000 G430 system, and all the drivers except for a few got installed automatically during the installation process...
    But then I noticed in Device Manager, I have 2 devices that are listed under 'Other Devices' that don't have a driver installed. I tried a direct search for drivers online, but it couldnt find any.
    Both of them are by the title 'Base System Device'.
    I checked the Lenovo wesite for drivers, but there are no drivers listed for WIndows 7. A few guys had raised this issue in the forum previously too, but they were not using Windows7, and I did not have this issue when I was using Vista...
    Please help...

    Hi tusharkaul,
    Try below to identify what components they are.
    Check the Device ID to find our its description:
    Right click the unknown device and choose Properties.
    Go to 'Details' tab.
    Choose 'Hardware ids' from the Property drop down list
     Take the IDs and google them and find out the descriptions of the devices. You should know what you are missing.
    WW Social Media
    T61, T410, x240, Z500, Flex 14
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    How to send a private message? --> Check out this article.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • T420 Base System Device Windows 7 64 bit

    Hello,
    I have Base System Device driver missing and wondered if someone could point me to the right direction. I have tried installing the Ricoh driver from the website to no avail. Tried many other from this site and others, still nothing :/
    Full model number: 4180-PR1
    OS: Windows 7 64 bit
    Hardware Ids:
    PCI\VEN_1180&DEV_E822&SUBSYS_213317AA&REV_08
    PCI\VEN_1180&DEV_E822&SUBSYS_213317AA
    PCI\VEN_1180&DEV_E822&CC_088001
    PCI\VEN_1180&DEV_E822&CC_0880
    Thank you
    T420 4180-PR1 - OS: Windows 7 Pro 64 bit

    Haha! I like the cut of your jib and the sound of your towne!
    Can you please post a screenshot link ( hosted at imgur - Photobucket - somephotosite) of your problem devices please?
    I myself have got 1xT420, 1xT520 and 1xW520 and I have never experienced any drivers missing after the intital run of System Update.
    Cheers!
    ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
    ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
    ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
    ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

  • Upgraded to windows 7 now my Base System Device and Fingerprint Reader isn't working!

    I recently upgraded from Windows Vista Business to Windows 7 Ultimate and my Base System Device and Fingerprint Reader isn't working.  I've tried reading advice off of some forums here and even checked out what I can download from this site and also tried updating but each time it either says could not find updates, or when I  try dowloading from this site it says the program may have not installed correctly.  I'm stuck I don't know what else I can do, can someone help, I would appreaciate it greatly!
    CheerGurl313

    Ah if only life were so simple. I have been without a soundcard ever since upgrading to Windows 7, have spent hours on the Lenovo site trying to locate a driver, filling in all those little boxes, time after time to no avail. The drivers, if they exist at all, are being kept secret. There can be no other explanation. Have the same problem with the fingerprint thingy, but not bothered as the kids had learnt to bypass it anyway.
    Enjoying windows 7 in complete silence. If anyone wants to advise downloading a driver then fantastic, but give us a clue where it is hidden. 

  • Sat Pro 6000: Unknown Base System-device Windows XP Prof. v.2002 SP1

    Where can I find a diver for an unknown Base System-device?

    Hi
    All neccassery Toshiba drivers you can find on the official Toshiba site:
    Check this link:
    http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    Bye

  • Missing drivers after fresh installation of window 7 the base system device missing.

    missing driver on  HP pavilion dv4 the base system device drive,as a result of these i cant access sound on system.

    Hi:
    The base system device is most likely your card reader.
    Missing audio is related to something else.
    On the bottom of your PC on the sticker with the serial number, please post your p/n.
    That will identify the specific model of your dv4 and I can send you the link to the drivers.
    The p/n should be arranged similar to this:  AF846AW#ABA
    Paul

  • 2 base system device drivers missing for dv9731ca on windows 7 os

    2 base system device drivers missing need help installing cant find them

    Hi:
    You need this driver.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-55520-1&cc=us&dlc=en&lc=en&...

  • ThinkPad W530 - 2447 3U2 - Base System Device unknown

    Hi guys, I tried to install a fresh copy of Windows Enterprise 7 64 bits, in my new laptop. I reinstall all drivers recommended in lenovo support (all) but in device manager window continues with yellow Base System Device message.
    These are the list of drivers installed:
    6hgx75ww.exe, 79oi30ww.exe, g1a133ww_w78.exe, g1ic09ww.exe, g1im15ww.exe, g1io15ww.exe, g1ir15ww.exe, g1ku20ww.exe, g1ra15ww.exe, g1rf42ww.exe, g1rg14ww.exe, g1rw10ww_64.exe, g1ss01ww.exe, g1w216ww_s64.exe, g1xv51ww.exe, g1ys12ww.exe, g4wb11ww.exe, g5de36ww.exe, geku18ww.exe, gfvv03ww.exe, hfu406ww.exe, os7021ww_64.exe, os7025ww_64.exe, osfj08ww.exe, osfq03ww.exe
    The last driver was 8ass82ww.exe and the problem persist.
    I need your help. Thanks
    Solved!
    Go to Solution.

    Guys, sorry for the little post. Here the complete:
    With this driver update:
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=TVSU-UPDATE
    I installed and all devices were recognized.
    Thanks you very much

  • Missing Base system device elitebook

    Hi
    My laptop reports that i'm missing the Base system device.
    Hp elitbook 2560p
    Hardware id's
    PCI\VEN_197B&DEV_2392&SUBSYS_162B103C&REV_30
    PCI\VEN_197B&DEV_2392&SUBSYS_162B103C
    PCI\VEN_197B&DEV_2392&CC_088000
    PCI\VEN_197B&DEV_2392&CC_0880
    I can't find the right drivers.
    Can somebody help me with this problem?
    This question was solved.
    View Solution.

    Hi,
    Install the card reader driver on the relevant link below.
    Card Reader Driver - Windows 8.1
    Card Reader Driver - Windows 8, XP, Vista, Windows 7
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Lenovo T530 – Base System Device driver Missing

    After rebooting from Linux (Ubuntu 12.10) into Windows 7 i noticed a “Base System Device”.
    i check the id material from that probleme;
    PCI\VEN_1180&DEV_E822&SUBSYS_21F617AA&REV_07
    PCI\VEN_1180&DEV_E822&SUBSYS_21F617AA
    PCI\VEN_1180&DEV_E822&CC_088001
    PCI\VEN_1180&DEV_E822&CC_0880
    i don't know how to fix that... Need help
    Thank you in advance
    Solved!
    Go to Solution.

    I have the same problem

  • Re: Base System-device

    Hello,
    I've installed Windows 7 Iand have noticed that two devices aren't installed properly. Both of them are called "Base System-device" and they are located at PCI bus 4, device 6, function 2 and 3. Any suggestion, plz?

    Hi,
    You didn't provide us much detail about your laptop model. I think, you should update a card reader according to the PCI bus 4, device 6, function 2 and 3
    http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  • X220 Base System Device problem

    Hi,
    I am trying to install the drivers for my Lenovo X220 on Windows 7 x64.
    I managed to install all of them except for the Base System Device.
    Could you please assisst?
    Thanks.
    I am attaching the Hardware ID of this device:
    Solved!
    Go to Solution.

    I think it's the Ricoh card reader: 
    Media Card Reader Driver
    /L40SX/240/240X/2*340CSE/360PE/365XD/380D/380E/380XD/380Z/390/560E/560X/2*570/2*600/600E/750Cs/755C/760CD/760EL/760XD/770E/A20p/A22p
    A31/i1600/G40/R50p/R61i/S30/SL510/2*T22/4*T4x/11*T6x/6*T4x0x/6*T5x0/3*W5x0/W700/3*X2x/4*X3x/3*X4x/5*X6x/3*X6xT/10*X2xx/2*X200T/4*X30x/Z60m/3*Z61x
    Comunidad en Español  English Community  Deutsche Community   Русскоязычное Сообщество

Maybe you are looking for

  • How can I get credit for a movie rental that never downloaded?

    I tried to rent a movie from iTunes through my Apple TV.  The movie has partially downloaded, but repeatedly stops, and I have to resume the download.  Many times it goes into an "Authorizing" state, but never starts the movie.  Now my 24 hour period

  • SapScript Form by email: Using output medium 5 - several email address

    Hello, ppl I've been doing some developing concerning the send of correspondence by email. I've used output medium 5, and have have build email recipient parameters as follow: Getting email address:   CLEAR address.   SELECT SINGLE smtp_addr FROM adr

  • _wl_cls_gen.jar artifact is missing some resources

    After deploying an Enterprise Application Archive (EAR) to Weblogic Server, for each WAR file contained in the EAR file, a <strong>wlcls_gen.jar</strong> artifact is generated in <ORACLE_SERVER>\user_projects\domains\<DOMAIN_NAME>\servers\<SERVER_NAM

  • HAL planning adapter issue

    Hi all, We are using planning 9.3.1, and the planning and HAL 7 are on same machine , the issue was when I tried to pull the planning adapter on to flow diagram - I got a prompt for planning server name , i gave the planning server name the error is

  • Tcp_wrappers

    has anyone successfully installed tcp_wrappers using gcc on a solaris 8 intel box? I get this error, please help. sjcfwb01 $ make CC=gcc sunos5 If none of these match your environment, edit the system dependencies sections in the Makefile and do a 'm