Dv6700 fresh win7. no sound. have drivers. System is reporting that it's making sound.

What gives?

Just remembered. The system will make error beeps at startup/bios, so it most likely isn't a hardware error.

Similar Messages

Do we have a General Ledger report that combines both cost centers and WBS?

Do we have a General Ledger report that combines both cost centers and WBS?

Have you tried FAGLL03

Root File system is reporting that it's full [SOLVED]

My root file system is reporting as full, and I'd like some ideas on how to track the problem. I've tried a number of things like searching for the largest directory, searching for the largest file, and all that jazz. I'm obviously missing something. /dev/sda3 should be at 50%.
One note. The computer started what seemed like normal today. I converted my second hard drive to ext4, rebooted, and started to notice that things that needed the /tmp directory couldn't start. I made some quick space to get operational by removing 56M of stuff from pacman's cache, but that's a quick hack. I don't know if this is related or not. I am running testin

skottish wrote:
MoonSwan wrote:
You're a dork who solved this issue and will know better next time. How is this a bad thing? I'm sure someone around here has done worse Skottish, so don't feel too stupid. (Won't name names but I'm sure as well that I've done worse somewhere...)
In the meantime, while you're down...*bonks skottish with the dork-stick*
Thanks for the kind words MoonSwan.
This happened because of the way my system is set up. I have rsync making backups of /home and /etc to /backup on close. It turns out that rsync created the /backup directory instead of using the existing one. Why? Because /dev/sdb1 wasn't mounted when I restarted after the conversion. Doh!
no shame in that. i totally freaked out once when i was still in school because i couldn't find a paper that was due. turned out i had /home unmounted when i saved the file, but had /home mounted when i went looking for it.
it was hiding under the mounted filesystem the whole time!

I am trying to set up my new ipad. I am at the Wi-Fi part. I have clicked on the network that we use at home but it isn't connecting.

I am trying to set up my new ipad. I am at the Wi-Fi part. I have clicked on the network that we use at home but it isn't connecting. At first there was an IP Address, a subnet Mask and the DNS. Now I just have the DNS showing. I am not sure what to do next?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Linux Mint 17, migrated from Win7: Verify that you have enough disk space, and that you have write privileges to the file system, then try again.

I get this error message (The messages could not be filtered to folder 'Generic Folder' because writing to folder failed. Verify that you have enough disk space, and that you have write privileges to the file system, then try again.) popping up on many, though not all of my incoming filters. I recently migrated from a Windows 7 installation to a Linux Mint 17 system.

I did give it time to run through everything when I initially migrated, and it frequently will sit open for 3 to 4 hours while I'm working on other projects.
The 'Generic Folder' represents sorting folders in my main mail account in Thunderbird. For example, my mail which is listed to filter into my 'Amazon' folder is sorted there with no problem, while any mail designated to be filtered into my 'Games' folder prompts the above error massage.

Satellite C660 - need help with fresh Win7 installation

After a problem with my SatC 660 i decided to Nuke the hard drive and do a fresh install using a W7 32 Bit disk created from the web ( there is a free library of Windows 7 iso images (Sorry forgot name).
So i had the disk in and the disk drive which has the disk in, W7 is now saying it cant find the device driver for the DVD Drive which it has just used for it to show the W7 first screen.
Looked everywhere for the drivers for the DVD Drive but no joy on the web.
Can anybody help me out please?

Maybe stupid question on the beginning but why you don't install original Win7 64 bit? I presume you got your machine with preinstalled operating system.
> So i had the disk in and the disk drive which has the disk in, W7 is now saying it cant find the device driver for the DVD Drive which it has just used for it to show the W7 first screen.
Sorry but after reading this sentence Im completely confused and don't know how to understand this. If you have created bootable installation disc I hope you were able to install Win7 correctly. After first start you must continue to install all necessary drivers, tools and utilities that you can find on Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp
Optical disc drive uses Microsoft driver and there is no some special driver for this device. It must be recognized automatically by preinstalled operating system.
If my posting was not helpful for you please be more precise with your problem description.

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. it doesnt show on software updat

I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.

10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood.

Why do Mac games have higher system preferences compared to Windows games?

Hello,
I am wondering why Mac games have higher system preferences compared to Windows games?
For example "The Movies" game on Mac requires:
Mac: OSX 10.4 Tiger or later,
PPC G4 1.67 GHz,
512MB RAM,
64MB video card,
DVD drive (minimum)
Whilst on Windows:
PC: Windows 98SE or later
800 MHz CPU
256MB RAM
DirectX 9.0c compatible sound and video card.
Now anyone can see the amount Windows needs compaired to Mac but why such a huge leap.
And this isn't only on "The Movies" it's the same with "Sims 2" and "Age of Empires"
If you know why could you please respond.
Thanks,
James

Hi there vickivoo,
You may find the troubleshooting steps in the article below helpful.
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
-Griff W.

I have 3 systems with the same issue (BSDOD) Event ID 41

I have 3 systems with the same issue that 1 to 4 times a day it crashes. This is on a VM complex running Win2K8 SR2.
I say many Symbol search path issues and fixed that on the system that can see internet (others are behind BSO Firewall)
Now I am down to the last issue with this first server W2K8.
If anyone cal help me it would really make my day...............
************* Symbol Path validation summary **************
Response                         Time (ms)     Location
OK
C:\Windows\Minidump
0: kd> !analyze -v
*                        Bugcheck Analysis
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffffa7f0ee7a410, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
Arg4: fffff88000e0b9ec, address which referenced memory
Debugging Details:
READ_ADDRESS: fffffa7f0ee7a410
CURRENT_IRQL: 2
FAULTING_IP:
NETIO!FreeMatchBufListInternal+1c
fffff880`00e0b9ec 488b5910        mov     rbx,qword ptr [rcx+10h]
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff880021d8990 -- (.trap 0xfffff880021d8990)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa7f0ee7a400
rdx=0000000000000002 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88000e0b9ec rsp=fffff880021d8b20 rbp=fffffa800cd199b8
r8=00000000000017e8 r9=00000000000000d0 r10=fffff80001603000
r11=0000000000000099 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0         nv up ei ng nz na po nc
NETIO!FreeMatchBufListInternal+0x1c:
fffff880`00e0b9ec 488b5910        mov     rbx,qword ptr [rcx+10h] ds:fffffa7f`0ee7a410=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80001678169 to fffff80001678bc0
STACK_TEXT:
fffff880`021d8848 fffff800`01678169 : 00000000`0000000a fffffa7f`0ee7a410 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
fffff880`021d8850 fffff800`01676de0 : fffffa80`0d6cdc50 fffff880`010d8ba0 00000000`00000000 fffffa80`0ec7a170 : nt!KiBugCheckDispatch+0x69
fffff880`021d8990 fffff880`00e0b9ec : fffffa80`0f173cf0 fffffa80`0cd199b8 00000000`48706657 fffffa80`0cd199b8 : nt!KiPageFault+0x260
fffff880`021d8b20 fffff880`00e150f3 : fffffa80`0ec7a170 fffffa80`0cd199b8 00000000`00000011 fffffa80`0cd199b8 : NETIO!FreeMatchBufListInternal+0x1c
fffff880`021d8b50 fffff880`00e13f9d : fffffa80`0ec7a190 00000000`00000000 fffff880`021d8c30 fffff880`00e9273f : NETIO!FreeCacheEntry+0xa3
fffff880`021d8b90 fffff880`00e15176 : fffff880`021d8c30 00000000`00000000 fffffa80`0cd82660 fffffa80`0cd199b8 : NETIO!FreeSomeCacheBucketEntries+0x6d
fffff880`021d8be0 fffff880`00e1e221 : 00000000`0000000c fffffa80`0cd82660 fffffa80`0c020004 fffffa80`0cd82660 : NETIO!FreeSomeCacheEntries+0x36
fffff880`021d8c10 fffff880`00e073de : fffffa80`0f000003 fffffa80`0f173cf0 fffffa80`0cd82660 fffffa80`0f173cf0 : NETIO! ?? ::FNODOBFM::`string'+0x7a46
fffff880`021d8c50 fffff800`0196fc93 : 00000000`00000001 00000000`00000001 fffffa80`0f173cf0 fffffa80`0cd82660 : NETIO!TickWorker+0xe
fffff880`021d8c80 fffff800`01682261 : fffff800`0181e200 fffff800`0196fc01 fffffa80`0cd82600 fffff800`0181e2d8 : nt!IopProcessWorkItem+0x23
fffff880`021d8cb0 fffff800`0191473a : 498b4809`75c43b41 fffffa80`0cd82660 00000000`00000080 fffffa80`0cd78740 : nt!ExpWorkerThread+0x111
fffff880`021d8d40 fffff800`016698e6 : fffff880`0205d180 fffffa80`0cd82660 fffffa80`0cd83660 ffffff33`e9ed75cd : nt!PspSystemThreadStartup+0x5a
fffff880`021d8d80 00000000`00000000 : fffff880`021d9000 fffff880`021d3000 fffff880`021d89e0 00000000`00000000 : nt!KxStartSystemThread+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!FreeMatchBufListInternal+1c
fffff880`00e0b9ec 488b5910        mov     rbx,qword ptr [rcx+10h]
SYMBOL_STACK_INDEX: 3
SYMBOL_NAME: NETIO!FreeMatchBufListInternal+1c
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 5294760d
FAILURE_BUCKET_ID: X64_0xD1_NETIO!FreeMatchBufListInternal+1c
BUCKET_ID: X64_0xD1_NETIO!FreeMatchBufListInternal+1c
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xd1_netio!freematchbuflistinternal+1c
FAILURE_ID_HASH: {4f4b2cba-a197-a425-b97a-8f7cbfbac87f}
Followup: MachineOwner

GWD
This does not surprise me at all. These were/are related to your Symantec. IMHO it is bloatware and after doing 10,000+ BSODS I have seem it more than any other malware app I would remove it and use MSE in its place
Symantec is a frequent cause of BSOD's.
I would remove and replace it with Microsoft Security Essentials AT LEAST TO TEST
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN
http://www.microsoft.com/security_essentials/
For Norton 360 use this http://symantec.pcperformancetools.com/norton-360-how-to-uninstall.html
Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\Minidump\102714-47923-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7601 (Service Pack 1) MP (4 procs) Free x64
Product: Server, suite: Enterprise TerminalServer SingleUserTS
Built by: 7601.18526.amd64fre.win7sp1_gdr.140706-1506
Machine Name:
Kernel base = 0xfffff800`0165e000 PsLoadedModuleList = 0xfffff800`018a1890
Debug session time: Mon Oct 27 05:05:39.635 2014 (UTC - 4:00)
System Uptime: 1 days 4:50:11.507
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck C5, {8, 2, 1, fffff80001808147}
*** WARNING: Unable to verify timestamp for SYMEFA64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEFA64.SYS
Probably caused by : SYMEFA64.SYS ( SYMEFA64+27c5 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_CORRUPTED_EXPOOL (c5)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is
caused by drivers that have corrupted the system pool. Run the driver
verifier against any new (or suspect) drivers, and if that doesn't turn up
the culprit, then use gflags to enable special pool.
Arguments:
Arg1: 0000000000000008, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000001, value 0 = read operation, 1 = write operation
Arg4: fffff80001808147, address which referenced memory
Debugging Details:
BUGCHECK_STR: 0xC5_2
CURRENT_IRQL: 2
FAULTING_IP:
nt!ExAllocatePoolWithTag+537
fffff800`01808147 48895808 mov qword ptr [rax+8],rbx
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER
PROCESS_NAME: ccSvcHst.exe
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
TRAP_FRAME: fffff880069f9580 -- (.trap 0xfffff880069f9580)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000000 rbx=0000000000000000 rcx=fffffa800f880f60
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80001808147 rsp=fffff880069f9710 rbp=0000000000001000
r8=0000000000000000 r9=fffff80001863770 r10=fffff80001863588
r11=0000000000000000 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!ExAllocatePoolWithTag+0x537:
fffff800`01808147 48895808 mov qword ptr [rax+8],rbx ds:00000000`00000008=????????????????
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff800016d3169 to fffff800016d3bc0
STACK_TEXT:
fffff880`069f9438 fffff800`016d3169 : 00000000`0000000a 00000000`00000008 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
fffff880`069f9440 fffff800`016d1de0 : fffff880`069f9690 fffffa80`0d157d80 fffff880`069f9500 fffff800`01863770 : nt!KiBugCheckDispatch+0x69
fffff880`069f9580 fffff800`01808147 : fffff8a0`078d3140 00000000`00000702 fffffa80`0f95c800 fffff8a0`078d33a8 : nt!KiPageFault+0x260
fffff880`069f9710 fffff880`016bf7c5 : fffff880`00000000 00000000`00000000 fffffa80`0ddc6530 fffff880`00000000 : nt!ExAllocatePoolWithTag+0x537
fffff880`069f9800 fffff880`00000000 : 00000000`00000000 fffffa80`0ddc6530 fffff880`00000000 00000000`00000000 : SYMEFA64+0x27c5
fffff880`069f9808 00000000`00000000 : fffffa80`0ddc6530 fffff880`00000000 00000000`00000000 fffff880`016bf514 : 0xfffff880`00000000
STACK_COMMAND: kb
FOLLOWUP_IP:
SYMEFA64+27c5
fffff880`016bf7c5 ?? ???
SYMBOL_STACK_INDEX: 4
SYMBOL_NAME: SYMEFA64+27c5
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: SYMEFA64
IMAGE_NAME: SYMEFA64.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 530fcaf7
FAILURE_BUCKET_ID: X64_0xC5_2_SYMEFA64+27c5
BUCKET_ID: X64_0xC5_2_SYMEFA64+27c5
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0xc5_2_symefa64+27c5
FAILURE_ID_HASH: {c40fe135-4c88-ce5c-c7b0-361d3927c5c6}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Does anyone have a new MacBook Pro that makes a buzzing sound on startup?

My new (60 days) MacBook Pro makes a buzzing sound on startup- does anyone else have this issue? Thanks!

Keep at the Genius Bar.
For one, you have a default 1 year warranty, which you do not want to let expire.
For another, that chine is a critical part of the system, that for some is an annoyance but at least it sticks around.
At some point, they have to either fix it or give you another (at least in my opinion they will eventually have to give me on that chimes).
Make a very good clone before you go back in. CarbonCopyClone ($40 download). You will need to clone it back onto a new system eventually, I suspect.

Am getting message saying something is trying to upload unsecure update for Firefox. Have scanned system with Avast but no reported problems

During a browsing session looking for spares for garden machinery I got a message saying something was trying to upload an unsecure update to Firefox. Have scanned system with Avast and a couple of other malware programs but have no reported threats. As far as I am aware my browser is fully up to date.

This issue can be caused by the presence of leftover files in the Firefox program folder (defaults\pref) like a file firefox.js that overrides the update URL with a wrong link.<br />
Do a clean reinstall and be sure to remove the Firefox program folder.<br />
See also:
* [/questions/826858]
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

DV7-3065DX - Fresh Win7 Install & 2 Unknown Devices?

Recently purchased this laptop and performed a fresh install of Windows 7 once getting home. After the install completed successfully, I noticed I have two Unknown Devices in my Device Manager that the install did not have drivers for. Ran through the Windows Update bit and still nothing. Any pointers on how to identify which two items these are so I can pull the drivers from the HP site?
To be more specific, the hardware IDs of each are ENE0100 and HPQ0004
Thanks in advance,
Message Edited by tdquiksilver on 10-27-2009 05:47 PM

hi,
ENE CIR Receiver Driver
32-bit & 64-bit same for both
ftp://ftp.hp.com/pub/softpaq/sp44501-45000/sp44994.exe
HP ProtectSmart
ftp://ftp.hp.com/pub/softpaq/sp42501-43000/sp42565.exe
you may have to run this manually
after extracting run
c:\swsetup\sp42565\setup.exe
& after installing it restart PC
Regards,
EverWin
~"If my solution has helped you in any way, please click on the white start to give Kudos."~
~"Please click on the Accept as solution button if your problem has been resolved."~

Looking for Win7 Pro SP1 ISO & Drivers

Hi I recently purchased a refurbished 8470P and would like to upgrade to an SSD and clean install of Win7. There is a COA sticker. However, I don't have the Win7 ISO file and MS doesn't provide this anymore for people who did not purchase retail copy. Does HP provide Windows ISO files? If so, where can I download it? Also, is there a pack of drivers for the 8470P that are in one easy download...or do I need to hunt and peck for them individually?

Hi: As of February 2015, Microsoft only allows the W7 ISO downloads if you enter a retail product key on their website. Your only option would be to order a set of recovery disks from HP. If you live in the USA/Canada, call this number ... 1-800-334-5144. Have the serial number handy to give to the customer services rep.

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs?

My apple is not activating,Asking for Apple ID &p.word, I have entered the apple ID which i was using to download all apps,but it wont work, Now system is saying that your apple Id is wrong, My question is Can there be two apple IDs? My apple ID is my Yahoo mail it self, but not able to log in to Icloud, Can any body guide, Why, I can not.

Hi dip_kinu,
I apologize, I'm a bit unclear on exactly what device you are trying to set up and what is happening when you try to do so. If you are having issues remembering your Apple ID, or feel like you may have set up multiple Apple ID's, you may find the following page helpful:
Apple - My Apple ID: Find your Apple ID
https://iforgot.apple.com/appleid
Regards,
- Brenden

The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)

Hi All,
I have created a user 'Bitest' and group 'Bi_Test_Group'. Assigned the user to the group and the group to BI consumer role.
I gave access to only procurement and spend catalog folder reports and Dashboards.
When I login to BI Presentation Services with above created user and open any procurement and spent catalog dashboard i am getting below error in every report.
Its BI Apps 7.9.6.3 installation.I gave read access to group to all procurement and spent subject area.
Error Codes: OAMP2OPY:OPR4ONWY:U9IM8TAC:OI2DL65P:OI2DL65P
Odbc driver returned an error (SQLExecDirectW).
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 23006] The session variable, NQ_SESSION.OU_ORG, has no value definition.Please have your System Administrator look at the log for more details on this error. (HY000)
SQL Issued: {call NQSGetQueryColumnInfo('SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"')}
SQL Issued: SELECT Fact."PO Amount" FROM "Procurement and Spend - Purchase Orders"
Please help me in resolving this issue and getting results on Dashboard.
Thanks in advance
Thanks,
Sandeep

Check your query or connection pool settings etc

Dv6700 fresh win7. no sound. have drivers. System is reporting that it's making sound.

Similar Messages

Maybe you are looking for